CTRON-SFPS-SFLSP-MIB

All MIBs › CTRON-SFPS-SFLSP-MIB

Category: Vendor: Cabletron/Enterasys

Description: Manages Cabletron SFPS SFLSP (SecureFast Link State Protocol) topology distribution and neighbor adjacencies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SFPS-SFLSP-MIB?

CTRON-SFPS-SFLSP-MIB is a Cabletron SecureFast Packet Switching (SFPS) MIB managing SFLSP (SecureFast Link State Protocol), the proprietary link-state routing protocol used to distribute topology information and maintain neighbor adjacencies across a SecureFast switch fabric. It exposes general protocol-state objects covering switch ID, admin status, protocol version, area/border-router role, LSA origination/reception counts, and link-state database queue depth (vlanSflspGeneralSwitchID, vlanSflspGeneralAdminStatus, vlanSflspGeneralAreaBRStatus, vlanSflspGeneralASBRStatus, vlanSflspGeneralOrgNewLSAs, vlanSflspGeneralRcvNewLSAs, vlanSflspGeneralMaxOnQueue, vlanSflspGeneralCurOnQueue). Its monitoring value is in the software health of the SFLSP routing process itself - whether it is administratively enabled, how many LSAs are being generated/received, and whether the link-state database processing queue is backing up (current vs. max queue) - which reveals topology-convergence problems or an overloaded routing process. Its design deliberately mirrors OSPF (area/ASBR concepts, LSAs), so it is conceptually dependent on OSPF-like link-state routing standards even though it's a proprietary protocol. It is deployed on Cabletron SecureFast switches to distribute Layer 2/3 topology information across a switched fabric, with the CTRON-SFPS-SFLSP-MIB MIB exposing that process for SNMP monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-SFLSP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron SecureFast Packet Switching (SFPS) switches

Monitoring Examples

An admin would poll vlanSflspGeneralAdminStatus and vlanSflspGeneralVersion to confirm SFLSP is enabled and running a consistent protocol version across switches, and check vlanSflspGeneralCurOnQueue against vlanSflspGeneralMaxOnQueue to detect a link-state database processing backlog signaling routing instability. vlanSflspGeneralOrgNewLSAs and vlanSflspGeneralRcvNewLSAs would be tracked over time to spot excessive LSA churn, often caused by a flapping link somewhere in the fabric. vlanSflspGeneralAreaBRStatus and vlanSflspGeneralASBRStatus reveal whether this switch is acting as an area or autonomous-system border router in the topology.

What Can Be Monitored

SFLSP admin status
LSA origination/reception rate
link-state queue depth/backlog
area/ASBR border router role
protocol version

Imported Objects

From CTRON-SFPS-INCLUDE-MIB

vlanSflsp1stHop	OBJECT-IDENTITY
vlanSflspArea	OBJECT-IDENTITY
vlanSflspGeneralVariables	OBJECT-IDENTITY
vlanSflspIfMetric	OBJECT-IDENTITY
vlanSflspInterfaces	OBJECT-IDENTITY
vlanSflspLSDBFlood	OBJECT-IDENTITY
vlanSflspLSPStats	OBJECT-IDENTITY
vlanSflspLsdb	OBJECT-IDENTITY
vlanSflspNeighbors	OBJECT-IDENTITY
vlanSflspTracePathAPI	OBJECT-IDENTITY
vlanSflspTracePathInternal	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
OCT vlanSflspGeneralSwitchID	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.1	OCTET STRING	read-write	A 10 byte octet string uniquely identifying the switch in the Switch Fabric. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to zeroes.
INT vlanSflspGeneralAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.2	INTEGER	read-write	The administrative status of the SFLSP in the switch. The value 'enabled' denotes that the SFLSP Process is active on at least one interface; 'disabled' disables it on all interfaces.
INT vlanSflspGeneralVersion	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.3	INTEGER	read-only	The current version number of the SFLSP protocol is 2
INT vlanSflspGeneralAreaBRStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.4	INTEGER	read-write	A flag to note whether this switch is an area border switch
INT vlanSflspGeneralASBRStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.5	INTEGER	read-write	A flag to note whether this switch is an Autonomous System border switch.
INT vlanSflspGeneralTOSSupport	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.6	INTEGER	read-write	The switch's support for type-of-service switching. Currently, this is set to false, indicating no type-of-service switching.
CTR vlanSflspGeneralOrgNewLSAs	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.7	Counter	read-only	Number of new link-state advertisements that have been originated. This number is incremented each time the switch originates a new LSA.
CTR vlanSflspGeneralRcvNewLSAs	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.8	Counter	read-only	The number of link-state advertisements received determined to be new. instantiations. This number does not include newer instantiations of self-originated link-state advertisements.
INT vlanSflspGeneralMaxOnQueue	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.9	INTEGER	read-only	Maximum number of events on the queue
INT vlanSflspGeneralCurOnQueue	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.10	INTEGER	read-only	Current number of events on the queue
INT vlanSflspGeneralMaxTimeUs	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.11	INTEGER	read-only	Maximum length of time to process events on the queue
INT vlanSflspGeneralCurTimeUs	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.12	INTEGER	read-only	Current length of time to process events on the queue
INT vlanSflspGeneralMaxEvents	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.13	INTEGER	read-write	Maximum number of events processed at once
TIK vlanSflspGeneralMaxTimeOccurred	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.14	TimeTicks	read-write	Maximum length of time occurred at this time
TIK vlanSflspGeneralMaxOnQOccurred	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.15	TimeTicks	read-write	Maximum number of events on the queue occurred at this time
INT vlanSflspGeneralTotalSwLinks	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.16	INTEGER	read-write	Total number of switch links in our database
TIK vlanSflspGeneralLastChangeDet	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.17	TimeTicks	read-write	Timestamp of last run of spf due to change detected in topology
OCT vlanSflspGeneralFloodMask	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.18	OCTET STRING	read-only
OCT vlanSflspGeneralLowestMac	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.19	OCTET STRING	read-only
OCT vlanSflspGeneralRootId	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.20	OCTET STRING	read-only
INT vlanSflspGeneralFloodAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.1.1.21	INTEGER	read-write
vlanSflspLsdbTable	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1		not-accessible	The SFLSP Process's Links State Database.
vlanSflspLsdbEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1		not-accessible	A single Link State Advertisement
INT vlanSflspLsdbAreaID	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.1	INTEGER	read-only	The 32-bit identifier of the Area from which the LSA was received.
INT vlanSflspLsdbType	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.2	INTEGER	read-only	The type of the link state advertisement. Each link state type has a seperate advertisement format.
OCT vlanSflspLsdbLSID	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.3	OCTET STRING	read-only	The Link State ID is an LS Type Specific field containing either a switch ID or a switch port name; it identifies the piece of the routing domain that is being described by the advertisement.
OCT vlanSflspLsdbSwitchID	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.4	OCTET STRING	read-only	A 10 byte octet string uniquely identifying the orignating switch in the Switch Fabric. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to zeroes.
INT vlanSflspLsdbSequence	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.5	INTEGER	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence numbers the more recent the advertisement.
INT vlanSflspLsdbAge	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.6	INTEGER	read-only	This field is the age of the link state advertisement in seconds .
INT vlanSflspLsdbChecksum	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.7	INTEGER	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating th checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
OCT vlanSflspLsdbAdvertisement	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.8	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
INT vlanSflspLsdbUsedInSPF	1.3.6.1.4.1.52.4.2.12.1.2.7.2.1.1.9	INTEGER	read-only
vlanSflspInterfacesTable	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1		not-accessible	The SFLSP Interface Table describes the interfaces from the viewpoint of SFLSP.
vlanSflspInterfacesEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1		not-accessible	The SFLSP Interfaces Entry describes one interface from the viewpoint of SFLSP
ADR vlanSflspInterfacesIFAddress	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.1	SfpsAddress	read-only	A 10 byte octet string uniquely identifying the port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the interface.
INT vlanSflspInterfacesSwAddressLess	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.2	INTEGER	read-only	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
IP vlanSflspInterfacesAreaID	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.3	IpAddress	read-write	A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the SFLSP backbone.
INT vlanSflspInterfacesIfType	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.4	INTEGER	read-write	The SFLSP interface type. Currently all interfaces are handled as broadcast type.
INT vlanSflspInterfacesAdminStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.5	INTEGER	read-write	The SFLSP interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to SFLSP.
INT vlanSflspInterfacesSwPriority	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.6	INTEGER	read-write	The priority of this interface. Used in multi-access networks, this field is used in the designated switch election algorithm. By default all switches are eligible with a priority of 1.
INT vlanSflspInterfacesTransDelay	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.7	INTEGER	read-write	The estimated number of seconds it takes to transmit a link-state update packet over this interface.
INT vlanSflspInterfacesReTransInterval	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.8	INTEGER	read-write	The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when re- transmitting database description and link-state request packets.
INT vlanSflspInterfacesHelloInterval	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.9	INTEGER	read-write	The lenght of time, in seconds, between the Hello packets that the switch sends on the interface. This value must be the same for all switches attached to a common network.
INT vlanSflspInterfacesDeadInterval	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.10	INTEGER	read-write	The number of seconds that a switch's Hello packets have not been seen before it's neighbors declare the switch down. This should be some multiple of the Hello interval. This value must be the same for all switches attached to a common network.
INT vlanSflspInterfacesPollInterval	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.11	INTEGER	read-write	The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
INT vlanSflspInterfacesState	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.12	INTEGER	read-only	The SFLSP Interface State.
ADR vlanSflspInterfacesDS	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.13	SfpsAddress	read-only	An octet string uniquely identifying the designated switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address.
ADR vlanSflspInterfacesBDS	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.14	SfpsAddress	read-only	An octet string uniquely identifying the backup designated switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address.
CTR vlanSflspInterfacesEvents	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.15	Counter	read-only	The number of times this SFLSP interface has changed its state, or an error has occured.
ADR vlanSflspInterfacesAuthKey	1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.16	SfpsAddress	read-write	THe Authentification Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets.
vlanSflspIfMetricTable	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1		not-accessible	The TOS metrics for a non-virtual interface indentified by the interface index.
vlanSflspIfMetricEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1.1		not-accessible	A particular TOS metric for a non-virtual interface identified by the interface index.
OCT vlanSflspIfMetricIfAddress	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1.1.1	OCTET STRING	read-only	A 10 byte octet string uniquely identifying the port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the interface.
INT vlanSflspIfMetricIfTOSType	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1.1.2	INTEGER	read-only	The type of service metric being referenced. On row creation, this can be derived from the instance..
INT vlanSflspIfMetricIfMetric	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1.1.3	INTEGER	read-write	The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.
INT vlanSflspIfMetricIfStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.4.1.1.4	INTEGER	read-write	This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent
vlanSflspNeighborsTable	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1		not-accessible	A table of non-virtual neighbor information .
vlanSflspNeighborsEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1		not-accessible	The information regarding a single neighbor.
OCT vlanSflspNeighborsPortName	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.1	OCTET STRING	read-only	A 10 byte octet string uniquely identifying the neighbor's port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the neighbor's interface.
OCT vlanSflspNeighborsSwitchID	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.2	OCTET STRING	read-only	An octet string uniquely identifying the neighboring switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address.
INT vlanSflspNeighborsOptions	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.3	INTEGER	read-only	A bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric .
INT vlanSflspNeighborsPriority	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.4	INTEGER	read-only	The priority of this neighbor in the designated switch election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated switch on this particular network.
INT vlanSflspNeighborsState	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.5	INTEGER	read-only	The State of the relationship with this Neighbor.
CTR vlanSflspNeighborsEvents	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.6	Counter	read-only	The number of times this neighbor relationship has changed state, or an error has occurred.
GAU vlanSflspNeighborsLSRetransQLen	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.7	Gauge	read-only	The current length of the retransmission queue.
INT vlanSflspNeighborsHELLOsRcvd	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.8	INTEGER	read-only	The number of hello packets received from this neighbor
INT vlanSflspNeighborsDBDsRcvd	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.9	INTEGER	read-only	The number of database description packets received from this neighbor
INT vlanSflspNeighborsLSUsRcvd	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.10	INTEGER	read-only	The number of link state update packets received from this neighbor
INT vlanSflspNeighborsLSRsRcvd	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.11	INTEGER	read-only	The number of link state request packets received from this neighbor
INT vlanSflspNeighborsLSACKsRcvd	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.12	INTEGER	read-only	The number of link state acknowledgement packets received from this neighbor
INT vlanSflspNeighborsHELLOsSent	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.13	INTEGER	read-only	The number of hello packets sent to this neighbor
INT vlanSflspNeighborsDBDsSent	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.14	INTEGER	read-only	The number of database description packets sent to this neighbor
INT vlanSflspNeighborsLSUsSent	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.15	INTEGER	read-only	The number of link state update packets sent to this neighbor
INT vlanSflspNeighborsLSRsSent	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.16	INTEGER	read-only	The number of link state request packets sent to this neighbor
INT vlanSflspNeighborsLSACKsSent	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.17	INTEGER	read-only	The number of link state acknowledgement packets sent to this neighbor
INT vlanSflspNeighborsNBMAStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.18	INTEGER	read-only	The variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependant.
TIK vlanSflspNeighborsFULLTimeSec	1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.19	TimeTicks	read-only	Neighbor went to FULL state at this time
vlanSflspAreaTable	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1		not-accessible	Information describing the configured parameters and cumulative statistics of the switches attached areas.
vlanSflspAreaEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1		not-accessible	Information describing the configured parameters and cumulative statistics of one of the switches attached areas.
IP vlanSflspAreaAreaID	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.1	IpAddress	read-only	A 10 byte octet string uniquely identifying an area.
INT vlanSflspAreaAuthType	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.2	INTEGER	read-write	The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.
CTR vlanSflspAreaSPFRuns	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.3	Counter	read-only	The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
GAU vlanSflspAreaABRCount	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.4	Gauge	read-only	The total number of area border switches reachable within this area. This is initially zero, and is calculated in each SPF Pass.
GAU vlanSflspAreaASBRCount	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.5	Gauge	read-only	The total number of Autonomous System border switches reachable within this area. This is initially zero, and is calculated in each LSP Pass.
GAU vlanSflspAreaAreaLSACnt	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.6	Gauge	read-only	The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's
INT vlanSflspAreaAreaCheckSum	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.7	INTEGER	read-only	The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a switches link state database, and to compare the link-state database of two switches.
TIK vlanSflspAreaLastSpfRun	1.3.6.1.4.1.52.4.2.12.1.2.7.6.1.1.8	TimeTicks	read-only	Timestamp of last run of spf
vlanSflsp1stHopTable	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1		not-accessible	This table contains the SecureFast path next-hop table. It reports various information about the next switch port address on the path to a particular destination switch port address.
vlanSflsp1stHopEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1.1		not-accessible	Each entry describes the next hop switch port addresses for each destination switch port address.
OCT vlanSflsp1stHopDestSwitch	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1.1.1	OCTET STRING	read-only	This is the index to the table, representing destination switch port addresses for each port address within the switch fabric.
OCT vlanSflsp1stHopPath11stHop	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1.1.2	OCTET STRING	read-only	The 1st hop of the 1st path to the destination switch
OCT vlanSflsp1stHopPath21stHop	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1.1.3	OCTET STRING	read-only	The 1st host of the 2nd path to the destination switch
OCT vlanSflsp1stHopPath31stHop	1.3.6.1.4.1.52.4.2.12.1.2.7.7.1.1.4	OCTET STRING	read-only	The 1st hop of the 3rd path to the destination switch
OCT vlanSflspTracePathAPIDest	1.3.6.1.4.1.52.4.2.12.1.2.7.8.1.1.1	OCTET STRING	read-write	This is the switch address for which a path list will be requested in the sfTracePathTable.
INT vlanSflspTracePathAPIID	1.3.6.1.4.1.52.4.2.12.1.2.7.8.1.1.2	INTEGER	read-write	This is an ID to uniquely identify the path list request in the sfTracePathTable.
INT vlanSflspTracePathAPIType	1.3.6.1.4.1.52.4.2.12.1.2.7.8.1.1.3	INTEGER	read-write	The administrative control of the trace path request entry in the sfTracePathTable. It is used to create or delete a trace path request entry.
INT vlanSflspTracePathAPIAction	1.3.6.1.4.1.52.4.2.12.1.2.7.8.1.1.4	INTEGER	read-write	The action to be performed by the trace path request entry in the sfTracePathTable.
vlanSflspTracePathTable	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1		not-accessible	This table allows the determination of paths to known destinations using the same internal methods used by the switch to program these paths. It is indexed by destination switch address and a request identifier. If successful, the resulting path, which consists of a list of switch port addresses, is reported in the sfTracePathReqHopTable.
vlanSflspTracePathEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1.1		not-accessible	An SF Trace Path Table entry containing objects for a particular destination switch.
OCT vlanSflspTracePathDest	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1.1.1	OCTET STRING	read-only	The switch address of the requested destination.
INT vlanSflspTracePathID	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1.1.2	INTEGER	read-only	A unique identifier for this path request.
INT vlanSflspTracePathAction	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1.1.3	INTEGER	read-write	The action to be performed by this trace path entry.
INT vlanSflspTracePathStatus	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.1.1.4	INTEGER	read-only	The results of a trace path request. A result of success(4) means the device has determined at least one path to the destination.
vlanSflspTracePathListTable	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2		not-accessible	This table contains the SecureFast Trace Path List table.
vlanSflspTracePathListEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1		not-accessible	This table contains the switch port addresses of each hop of each path traversed for a particular destination switch. These paths correspond to trace path requests in the sfTracePathReqTable.
OCT vlanSflspTracePathListDest	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1.1	OCTET STRING	read-only	The switch address of the destination for this trace path entry, corresponding to a requested destination in the sfTracePathReqTable.
INT vlanSflspTracePathListID	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1.2	INTEGER	read-only	A unique identifier corresponding to the identifier in a trace path request in the sfTracePathReqTable.
INT vlanSflspTracePathListPathNum	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1.3	INTEGER	read-only	The number of this path in the table of networks traversed. This value represents a unique path id when there are multiple paths to a single destination.
INT vlanSflspTracePathListHopNum	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1.4	INTEGER	read-only	The hop number in this path.
OCT vlanSflspTracePathListHopAddr	1.3.6.1.4.1.52.4.2.12.1.2.7.8.2.2.1.5	OCTET STRING	read-only	The switch port address of this hop on the path.
vlanSflspLSDBFloodTable	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1		not-accessible
vlanSflspLSDBFloodEntry	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1		not-accessible
INT vlanSflspLSDBFloodAreaID	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.1	INTEGER	read-only
INT vlanSflspLSDBFloodType	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.2	INTEGER	read-only
ADR vlanSflspLSDBFloodLSID	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.3	SfpsAddress	read-only
ADR vlanSflspLSDBFloodAdvSwitchID	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.4	SfpsAddress	read-only
INT vlanSflspLSDBFloodSequence	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.5	INTEGER	read-only
INT vlanSflspLSDBFloodAge	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.6	INTEGER	read-only
INT vlanSflspLSDBFloodChecksum	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.7	INTEGER	read-only
ADR vlanSflspLSDBFloodAdvertisement	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.8	SfpsAddress	read-only
INT vlanSflspLSDBFloodUsedInSPF	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.9	INTEGER	read-only
INT vlanSflspLSDBFloodEverUsed	1.3.6.1.4.1.52.4.2.12.1.2.7.20.1.1.10	INTEGER	read-only
INT vlanSflspLSPStatsMaxOnQueue	1.3.6.1.4.1.52.4.2.12.1.2.7.21.1	INTEGER	read-only
INT vlanSflspLSPStatsCurOnQueue	1.3.6.1.4.1.52.4.2.12.1.2.7.21.2	INTEGER	read-only
INT vlanSflspLSPStatsMaxTimeUs	1.3.6.1.4.1.52.4.2.12.1.2.7.21.3	INTEGER	read-only
INT vlanSflspLSPStatsCurTimeUs	1.3.6.1.4.1.52.4.2.12.1.2.7.21.4	INTEGER	read-only
INT vlanSflspLSPStatsMaxTimeOccurred	1.3.6.1.4.1.52.4.2.12.1.2.7.21.5	INTEGER	read-only
TIK vlanSflspLSPStatsMaxOnQOccurred	1.3.6.1.4.1.52.4.2.12.1.2.7.21.6	TimeTicks	read-only
INT vlanSflspLSPStatsTotalSwLinks	1.3.6.1.4.1.52.4.2.12.1.2.7.21.7	INTEGER	read-only
TIK vlanSflspLSPStatsLastChangeDet	1.3.6.1.4.1.52.4.2.12.1.2.7.21.8	TimeTicks	read-only
INT vlanSflspLSPStatsNumSPFRuns	1.3.6.1.4.1.52.4.2.12.1.2.7.21.9	INTEGER	read-write
INT vlanSflspLSPStatsNumFULLNbrs	1.3.6.1.4.1.52.4.2.12.1.2.7.21.10	INTEGER	read-only
INT vlanSflspLSPStatsNumIntfs	1.3.6.1.4.1.52.4.2.12.1.2.7.21.11	INTEGER	read-only
INT vlanSflspLSPStatsNum1stHops	1.3.6.1.4.1.52.4.2.12.1.2.7.21.12	INTEGER	read-only
INT vlanSflspLSPStatsNumUpdates	1.3.6.1.4.1.52.4.2.12.1.2.7.21.13	INTEGER	read-only
TIK vlanSflspLSPStatsLastUpdateRecvd	1.3.6.1.4.1.52.4.2.12.1.2.7.21.14	TimeTicks	read-only

RFC description

Defines Fast Packet Switching Services API and VLAN spanning tree protocols for Cabletron switch fabric platforms.

Start monitoring Cabletron SecureFast switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SFPS-SFLSP-MIB

What Is CTRON-SFPS-SFLSP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description