CISCO-WDS-INFO-MIB

All MIBs › CISCO-WDS-INFO-MIB

Organization: Cisco Systems Inc.

Last Updated: 2005-09-15

Category: Vendor: Cisco Devices, Wireless and WLAN

Description: Provides Cisco Wireless Domain Services topology and membership information for WLAN infrastructure.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-WDS-INFO-MIB?

CISCO-WDS-INFO-MIB provides information about Cisco Wireless Domain Services (WDS), a control mechanism in Cisco's wireless LAN infrastructure (particularly the Wireless LAN Services Module, WLSM) that manages Layer 3 roaming for wireless clients moving between access points on different subnets. It exposes topology and membership data for the WLAN infrastructure: a MAC-authentication cache of client devices, and a table of access points registered with the WDS, including each AP's address, name, state, and how long it has been known to the WDS. From a monitoring standpoint it lets an administrator confirm WDS membership health, verifying which access points are currently registered and in what operational state, and tracking AP lifetime to spot APs that have dropped off and re-registered (a sign of connectivity flapping), as well as monitoring cache aging for client authentication entries. It is used alongside Cisco's Lightweight/Central-Controller wireless architecture and depends on the broader Cisco wireless infrastructure MIB set for AP and controller identification. It is deployed on Cisco wireless LAN controllers/WLSM modules acting as the WDS in enterprise wireless deployments with roaming clients. Engineers can download the CISCO-WDS-INFO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-WDS-INFO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Wireless LAN Controller / Wireless LAN Services Module (WLSM) providing Wireless Domain Services

Monitoring Examples

Polling cwdsiApTable/cwdsiApEntry, keyed by cwdsiApMacAddr, reveals each registered access point's cwdsiApName, cwdsiApAddr, and cwdsiApState; an AP that unexpectedly transitions out of a registered state, or whose cwdsiApLifeTime resets frequently, points to a flapping WDS registration or L3 connectivity problem. The cwdsiMacAuthCacheTable, keyed by cwdsiMacAuthCacheMacAddr, tracks client MAC authentication cache entries and their cwdsiMacAuthCacheAge, useful for auditing how long a roaming client's authentication has been cached. ciscoWdsInfoMIBNotifs would raise a trap when AP membership changes occur.

What Can Be Monitored

registered access point state
access point membership lifetime
MAC authentication cache entries/age
AP identity and address mapping

Imported Objects

From CISCO-DOT11-IF-MIB

CDot11IfVlanIdOrZero

From CISCO-DOT11-SSID-SECURITY-MIB

CDot11SecAuthKeyMgmtType
CDot11SsidString

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
TEXTUAL-CONVENTION
TimeStamp

How to Use in IPNetwork Monitor

Example using cwdsiAaaAuthAttemptCount OID:

Select a Cisco Wireless LAN Controller as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cwdsiAaaAuthAttemptCount into the Find box to locate it in the OID tree, then select it and click OK. This object specifies the number of AAA authentication attempts (such as LEAP) made by WDS to authenticate Access Points and Mobile Nodes. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoWdsInfoAccessPoint	1.3.6.1.4.1.9.9.509.1.2
ciscoWdsInfoAccessPointGroup	1.3.6.1.4.1.9.9.509.2.2.2			This collection of objects provide the information about entities of a Access Point registered with WDS.
ciscoWdsInfoMacAuthCache	1.3.6.1.4.1.9.9.509.1.1
ciscoWdsInfoMacAuthCacheGroup	1.3.6.1.4.1.9.9.509.2.2.1			This collection of objects provide the information about MAC addresses and ages for MAC authentication of the device station.
ciscoWdsInfoMIB	1.3.6.1.4.1.9.9.509			This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provides a control mechanism for wireless devices that roam between Access Points residing on different layer 3 subnets. When WDS is in the Wireless LAN Services Module(WLSM), the access points providing Layer 3 mobility must register with the WDS before wireless devices are given access to the mobility network. The location of the WDS is specified in each Access Point along with LEAP device credentials that are required for authentication with the WDS. Once the Access Point and the Mobile Node are authenticated with the WDS, those are considered registered. This MIB reports the information about the Wireless Domain Servers, Access Points, Mobile Nodes, and their roaming patterns. GLOSSARY AAA Authentication, Authorization, Accounting Access Point (AP) An entity that contains an 802.11 medium access control (MAC) and physical layer (PHY) interface and provides access to the distribution services via the wireless medium for associated devices. BSSID Basic Service Set Identification, where the basic service set is defined as the set of data transfer rates that all the stations in a BSS will be capable of using to receive frames from the wireless medium. CCKM Cisco Central Key Management. Context The mobility context for a Mobile Node includes its current mobility bindings with the Access Points, IP/802 address bindings, cached configuration parameters, QoS state, IP group membership, authentication state, accounting statistics, and other dynamically derived protocol state information. EAP Extensible Authentication Protocol. Hot Standby Router Protocol (HSRP) Cisco Hot Standby Router Protocol as defined in RFC2281 L3MM Layer-3 Mobility Manager (L3MM) is a new software entity residing on Central Switch (CS). L3MM maintains the mobility database and manages mGRE tunnels and tunnel paths to provide L3 Mobility for wireless clients. Layer 3 Mobility Control Protocol (LCP) A simple protocol to exchange control message between WDS and L3MM to achieve layer 3 seamless mobility for wireless devices. mGRE Tunnels Multipoint Generic Routing Encapsulation tunnels. This tunnel is used to tunnel wireless traffic and used to transfer wireless traffic between AP and CS. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. Mobile Node (MN) A roaming 802.11 wireless device in a wireless network associated with an Access Point. SSID Service Set Identification, where the station service is defined as the set of services that support transport of medium access control (MAC) service data units (MSDUs) between stations within a basic service set. TKIP WPA Temporal Key encryption. Wireless Domain Services (WDS) The set of services being offered at a particular broadcast domain that may be an IP subnet or a particular VLAN, or across the L3 cloud. The services include the following. 1. Fast Secure Roaming with CCKM. 2. Layer 3 seamless mobility. 3. Radio Management aggregation for 802.11 wireless clients . WDS Entity The logical entity that resides in an infrastructure node and offers WDS to the descendants of that infrastructure node in the wireless services hierarchy. WEP Wired Equivalent Privacy. This is generally used to refer to 802.11 legacy encryption. WLSM Wireless LAN Services Module Wireless Network Manager (WNM) The network management system that manages the entire hierarchy of devices providing WDS. WPA WiFi Protected Access.
ciscoWdsInfoMIBCompliance	1.3.6.1.4.1.9.9.509.2.1.1			The compliance statement for the SNMP entities that implement the cwdsiInformationMIB module.
ciscoWdsInfoMIBCompliances	1.3.6.1.4.1.9.9.509.2.1
ciscoWdsInfoMIBConform	1.3.6.1.4.1.9.9.509.2
ciscoWdsInfoMIBGroups	1.3.6.1.4.1.9.9.509.2.2
ciscoWdsInfoMIBNotifs	1.3.6.1.4.1.9.9.509.0
ciscoWdsInfoMIBObjects	1.3.6.1.4.1.9.9.509.1
ciscoWdsInfoMobileNode	1.3.6.1.4.1.9.9.509.1.3
ciscoWdsInfoMobileNodeGroup	1.3.6.1.4.1.9.9.509.2.2.3			This collection of objects provide the information about entities of Mobile Node registered with WDS.
ciscoWdsInfoMobility	1.3.6.1.4.1.9.9.509.1.6
ciscoWdsInfoMobilityGroup	1.3.6.1.4.1.9.9.509.2.2.6			This collection of objects provide the information about entities of the Mobility Network.
ciscoWdsInfoNetworkManager	1.3.6.1.4.1.9.9.509.1.4
ciscoWdsInfoNetworkManagerGroup	1.3.6.1.4.1.9.9.509.2.2.4			This collection of objects provide the information about the configuration status and statistics data between WDS and Network Manager.
ciscoWdsInfoNotifGroup	1.3.6.1.4.1.9.9.509.2.2.8			This collection of objects provide the notifications about the LCP status and HSRP state.
ciscoWdsInfoRoamStatistics	1.3.6.1.4.1.9.9.509.1.7
ciscoWdsInfoRoamStatisticsGroup	1.3.6.1.4.1.9.9.509.2.2.7			This collection of objects provide the information about the Roaming statistics.
ciscoWdsInfoStatistics	1.3.6.1.4.1.9.9.509.1.5
ciscoWdsInfoStatisticsGroup	1.3.6.1.4.1.9.9.509.2.2.5			This collection of objects provide the information about the statistics of Access Points and Mobile Nodes registered with WDS.
C32 cwdsiAaaAuthAttemptCountEx	1.3.6.1.4.1.9.9.509.1.5.3	Counter32	read-only	This object specifies the number of AAA authentication attempts (such as LEAP) made by WDS to authenticate Access Points and Mobile Nodes. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiAaaAuthFailureCount	1.3.6.1.4.1.9.9.509.1.5.5	Counter32	read-only	This object specifies the number of failed AAA authentication attempts made by WDS to authenticate Access Points and Mobile Nodes. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiAaaAuthSuccessCount	1.3.6.1.4.1.9.9.509.1.5.4	Counter32	read-only	This object specifies the number of successful AAA authentication successes made by WDS to authenticate Access Points and Mobile Nodes. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
IP cwdsiApAddr	1.3.6.1.4.1.9.9.509.1.2.1.1.3	InetAddress	read-only	The Internet address of the Access Point.
IPt cwdsiApAddrType	1.3.6.1.4.1.9.9.509.1.2.1.1.2	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiApAddr.
cwdsiApEntry	1.3.6.1.4.1.9.9.509.1.2.1.1		not-accessible	Each entry is a set of attributes of an Access Point currently registered with WDS.
U32 cwdsiApLifeTime	1.3.6.1.4.1.9.9.509.1.2.1.1.6	Unsigned32	read-only	This object specifies the maximum time after which the registration of the Access Point with WDS expires. The Access Point must re-register before the lifetime is exhausted, otherwise it will be deleted from the table.
MAC cwdsiApMacAddr	1.3.6.1.4.1.9.9.509.1.2.1.1.1	MacAddress	not-accessible	The MAC address of the Access Point.
STR cwdsiApName	1.3.6.1.4.1.9.9.509.1.2.1.1.4	SnmpAdminString	read-only	This object specifies the hostname of the Access Point.
IP cwdsiApNeighborAddr	1.3.6.1.4.1.9.9.509.1.2.1.1.8	InetAddress	read-only	The Internet address of the network entity with which the Ethernet port of the Access Point is directly connected.
IPt cwdsiApNeighborAddrType	1.3.6.1.4.1.9.9.509.1.2.1.1.7	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiApNeighborAddr.
STR cwdsiApNeighborName	1.3.6.1.4.1.9.9.509.1.2.1.1.9	SnmpAdminString	read-only	This object specifies the hostname of the network entity with which the Ethernet port of the Access Point is directly connected.
STR cwdsiApNeighborPortName	1.3.6.1.4.1.9.9.509.1.2.1.1.10	SnmpAdminString	read-only	This object specifies the port name of the network entity with which the Ethernet port of the Access Point is directly connected. This will typically be the value of the ifName object (e.g., 'Ethernet0').
G32 cwdsiApNum	1.3.6.1.4.1.9.9.509.1.5.1	Gauge32	read-only	This object specifies the number of Access Points currently registered with this WDS.
CWD cwdsiApState	1.3.6.1.4.1.9.9.509.1.2.1.1.5	CWdsDeviceState	read-only	This object specifies the registration state of the Access Point with the WDS.
cwdsiApTable	1.3.6.1.4.1.9.9.509.1.2.1		not-accessible	This table provides the information about the Access Points registered with WDS. An entry is added to this table when a Access Point register with WDS and the entry is removed after the lifetime of the Access Point expires.
IP cwdsiCsMgmtAddr	1.3.6.1.4.1.9.9.509.1.6.3	InetAddress	read-only	The Internet address of the Central Switch Management.
IPt cwdsiCsMgmtAddrType	1.3.6.1.4.1.9.9.509.1.6.2	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiCsMgmtAddr.
INT cwdsiHsrpState	1.3.6.1.4.1.9.9.509.1.6.8	INTEGER	read-only	This object indicates the state of HSRP. unknown(1) - The state is unknown. disabled(2) - The HSRP is disabled. initial(3) - This is the starting state and indicates that HSRP is not running. learn(4) - The router is still waiting to hear from the active router. backup(5) - The router monitors the availability and state of the Master Router. speak(6) - The router sends periodic Hello messages and is actively participating in the election of the active and/or standby router. standby(7) - The router is a candidate to become the next active router and sends periodic Hello messages. active(8) - The router is currently forwarding packets that are sent to the group's virtual MAC address. The router sends periodic Hello messages.
NTF cwdsiHsrpStateChange	1.3.6.1.4.1.9.9.509.0.2			This notification will be sent when HSRP state changes from 'standby' to 'active' or from 'active' to 'standby'.
C32 cwdsiKscFailureCount	1.3.6.1.4.1.9.9.509.1.5.11	Counter32	read-only	This object specifies the number of failures for Key Sequence (KSC) with which WDS authenticates the Mobile Node for Fast Secure Roaming. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
INT cwdsiLcpStatus	1.3.6.1.4.1.9.9.509.1.6.1	INTEGER	read-only	This object indicates the LCP link status. LCP is a communication protocol between WDS residing on WLSM and L3MM on RP to provide L3MM with up-to-date information about current location of Mobile Node and also to propagate tunnel end point and other configuration information from RP to WDS/AP. down(1) - The LCP link status is down, up(2) - The LCP link status is up, inTransition(3) - The LCP link status is in transition from up(2) to down(1) or from down(1) to up(2).
NTF cwdsiLcpStatusChange	1.3.6.1.4.1.9.9.509.0.1			This notification will be sent when a LCP status changes from 'down' to 'up' or from 'up' to 'down'.
U32 cwdsiMacAuthCacheAge	1.3.6.1.4.1.9.9.509.1.1.1.1.2	Unsigned32	read-only	This object specifies the elapsed time since the MAC address has been cached. If the MAC address is not flushed within the specific time(default 30 minutes), the entry with cwdsiMacAuthCacheMacAddr is removed.
cwdsiMacAuthCacheEntry	1.3.6.1.4.1.9.9.509.1.1.1.1		not-accessible	Each entry is a set of a MAC address and age for fast MAC authentication.
MAC cwdsiMacAuthCacheMacAddr	1.3.6.1.4.1.9.9.509.1.1.1.1.1	MacAddress	not-accessible	This object specifies the MAC address of the device which is cached in the WDS for MAC authentication.
cwdsiMacAuthCacheTable	1.3.6.1.4.1.9.9.509.1.1.1		not-accessible	This table provides the information about the MAC addresses cached in the WDS for MAC authentication. MAC authentication caching reduces overhead because the WDS authenticates devices in its MAC-address cache without sending the request to the authentication server. An entry is added to this table when a Mobile Node completes MAC authentication to the authentication server. An entry is removed if the MAC address is not flushed before timeout.
C32 cwdsiMacSpoofingBlockCount	1.3.6.1.4.1.9.9.509.1.5.6	Counter32	read-only	This object specifies the number of MAC Spoofing attempts detected and blocked by WDS. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiMicFailureCount	1.3.6.1.4.1.9.9.509.1.5.12	Counter32	read-only	This object specifies the number of Message Integrity Check (MIC) failures detected by WDS. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
IP cwdsiMnAddr	1.3.6.1.4.1.9.9.509.1.3.1.1.3	InetAddress	read-only	The Internet address of the Mobile Node.
IPt cwdsiMnAddrType	1.3.6.1.4.1.9.9.509.1.3.1.1.2	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiMnAddr.
IP cwdsiMnApAddr	1.3.6.1.4.1.9.9.509.1.3.1.1.6	InetAddress	read-only	The Internet address of the Access Point with which the Mobile Node has associated.
IPt cwdsiMnApAddrType	1.3.6.1.4.1.9.9.509.1.3.1.1.5	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiMnApAddr.
MAC cwdsiMnApMacAddr	1.3.6.1.4.1.9.9.509.1.3.1.1.4	MacAddress	read-only	The MAC address of the Access Point with which the Mobile Node is associated.
CWD cwdsiMnAuthType	1.3.6.1.4.1.9.9.509.1.3.1.1.13	CWdsDeviceAuthType	read-only	This object specifies one of the pre-defined authentication algorithms and additional authentication procedures for the Mobile Node. When the cwdsiMnState is 'registered', the valid combination of the authentications are: - open(0), - shared(1), - leap(2), - eap(3), - mac(4), - open(0) and eap(3), - open(0) and mac(4), - open(0), eap(3) and mac(4), - open(0) and macOrEap(5), - shared(1) and eap(3), - shared(1) and mac(4), - shared(1), eap(3) and mac(4), - mac(4) and leap(2). Otherwise, the valid combination of the authentications are: - eap(3), - mac(4), - eap(3) and mac(4), - macOrEap(5), - leap(2), - mac(4) and leap(2), - macOrLeap(6), - eapOptional(7). If none of the bits are set, there is no run-time authentication.
MAC cwdsiMnBssid	1.3.6.1.4.1.9.9.509.1.3.1.1.10	MacAddress	read-only	This object specifies the BSSID used by the Mobile Node to communicate with the Access Point.
cwdsiMnEntry	1.3.6.1.4.1.9.9.509.1.3.1.1		not-accessible	Each entry is a set of attributes of a Mobile Node currently registered with WDS.
CDO cwdsiMnKeyMgmt	1.3.6.1.4.1.9.9.509.1.3.1.1.12	CDot11SecAuthKeyMgmtType	read-only	This object specifies the type of authenticated key management. If none of the bit is set, no key management is used.
U32 cwdsiMnLifetime	1.3.6.1.4.1.9.9.509.1.3.1.1.15	Unsigned32	read-only	This object specifies the maximum time after which the registration of the Mobile Node with its WDS expires. The Mobile Node must re-register before the time expires, otherwise it will be deleted from the table.
MAC cwdsiMnMacAddr	1.3.6.1.4.1.9.9.509.1.3.1.1.1	MacAddress	not-accessible	The MAC address of the Mobile Node.
U32 cwdsiMnMobilityNetworkId	1.3.6.1.4.1.9.9.509.1.3.1.1.7	Unsigned32	read-only	This object specifies the mobility network-id of the Mobile Node.
G32 cwdsiMnNum	1.3.6.1.4.1.9.9.509.1.5.2	Gauge32	read-only	This object specifies the number of Mobile Nodes currently registered with this WDS.
STR cwdsiMnSsid	1.3.6.1.4.1.9.9.509.1.3.1.1.9	CDot11SsidString	read-only	This object specifies the SSID with which the Mobile Node has associated with the Access Point.
CWD cwdsiMnState	1.3.6.1.4.1.9.9.509.1.3.1.1.8	CWdsDeviceState	read-only	This object specifies the registration state of the Mobile Node with WDS.
cwdsiMnTable	1.3.6.1.4.1.9.9.509.1.3.1		not-accessible	This table provides the information about the Mobile Nodes registered with WDS. An entry is added to this table when a Mobile Node registers with WDS and the entry is removed after the lifetime of the Mobile Node expires.
TIM cwdsiMnUptime	1.3.6.1.4.1.9.9.509.1.3.1.1.14	TimeStamp	read-only	This object specifies the value of sysUpTime at the time this Mobile Node registered with WDS.
CDO cwdsiMnVlan	1.3.6.1.4.1.9.9.509.1.3.1.1.11	CDot11IfVlanIdOrZero	read-only	This object specifies the VLAN ID used by Access Point to bridge trunk that carries the traffic, when the Mobile Node associates with Access Point specified by cwdsiMnApAddr, using SSID specified by cwdsiMnSsid.
cwdsiMobilityGroupEntry	1.3.6.1.4.1.9.9.509.1.6.9.1		not-accessible	Each entry is a set of attributes of a Mobility network-id currently configured in WDS.
cwdsiMobilityGroupTable	1.3.6.1.4.1.9.9.509.1.6.9		not-accessible	This table provides the information about mobility network-id. When a Mobile Node associates with a mobility enabled SSID, the Mobile Node registers with the network and is assigned to a particular mobility group. At the system level, a mobility network-id internally defines this mobility group. The mobility network-id is the mechanism the system uses to associate the user with a particular Fast Secure Roaming Tunnel. As the Mobile Node roams, the system tracks user movement, making sure that the user maintains association with the same mobility group.
BIT cwdsiMobilityGrpFlags	1.3.6.1.4.1.9.9.509.1.6.9.1.5	Bits	read-only	This object specifies the attributes of the mobility tunnel. none(0) - The mobility network-id is not supported on L3MM. trusted(1) - By default, a mobility network is considered 'untrusted'. In an untrusted network, Mobile Nodes are required to use a DHCP-obtained IP address. In a 'trusted' network, Mobile Nodes are allowed to use static IP addresses. On an untrusted network, data forwarding path for a Mobile Node is established and updated by snooping DHCP packets between the Mobile Node and the DHCP server. On the other hand, a trusted network data path establishment and update is achieved by snooping IP packets generated by the Mobile Node. broadcast(2) - IP broadcast is allowed on the mobility network-id corresponding to this tunnel. tcpMssAdjust(3)- The Access Point should do a TCP Maximum Segment Size (MSS) adjustment for the tunnel corresponding to the mobility network-id. dynamic(4) - Wireless broadcast domain corresponding to mobility network-id is dynamically created on an Access Point. multicast(5) - IP multicast is allowed on the mobility network-id corresponding to this tunnel. ipDiscovery(6) - IP broadcast pings will be generated to discover the IP address of the wireless client.
G32 cwdsiMobilityGrpMnNum	1.3.6.1.4.1.9.9.509.1.6.9.1.6	Gauge32	read-only	This object specifies the number of Mobile Nodes of which the mobility network-id is cwdsiMobilityGrpNetworkId.
U32 cwdsiMobilityGrpNetworkId	1.3.6.1.4.1.9.9.509.1.6.9.1.1	Unsigned32	not-accessible	This objects specifies the mobility network-id which uniquely defines a mobility group.
IP cwdsiMobilityGrpTunnelAddr	1.3.6.1.4.1.9.9.509.1.6.9.1.3	InetAddress	read-only	This object specifies the Internet address of the Mobility tunnel, which is the tunnel source address of the mGRE tunnel on RP. Access Point uses this address to tunnel Mobile Node traffic.
IPt cwdsiMobilityGrpTunnelAddrType	1.3.6.1.4.1.9.9.509.1.6.9.1.2	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiMobilityGrpTunnelAddr.
U32 cwdsiMobilityGrpTunnelMtu	1.3.6.1.4.1.9.9.509.1.6.9.1.4	Unsigned32	read-only	This object specifies the maximum transmission unit of IP packet for the Mobility tunnel.
C32 cwdsiMscMismatchCount	1.3.6.1.4.1.9.9.509.1.5.10	Counter32	read-only	This object specifies the number of Message Sequence Counter (MSC) mismatches. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiRnMismatchCount	1.3.6.1.4.1.9.9.509.1.5.13	Counter32	read-only	This object specifies the number of mismatches for ReKey Number (RN) with which WDS authenticates the Mobile Node for Fast Secure Roaming. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiRoamMblGrpStatsAuthAaa	1.3.6.1.4.1.9.9.509.1.7.5.1.4	Counter32	read-only	This object specifies the count of roams with AAA authentications within the mobility network-id. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiRoamStatsStartTime.
cwdsiRoamMblGrpStatsEntry	1.3.6.1.4.1.9.9.509.1.7.5.1		not-accessible	Each entry is a set of roaming statistics.
C32 cwdsiRoamMblGrpStatsFastSecured	1.3.6.1.4.1.9.9.509.1.7.5.1.5	Counter32	read-only	This object specifies the count of roams with Fast Secured authentications within the mobility network-id. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiRoamStatsStartTime.
G32 cwdsiRoamMblGrpStatsFiveMinutes	1.3.6.1.4.1.9.9.509.1.7.5.1.8	Gauge32	read-only	This object specifies the average number of roams per second for the previous 5 minutes interval within the mobility network-id.
G32 cwdsiRoamMblGrpStatsFiveSeconds	1.3.6.1.4.1.9.9.509.1.7.5.1.6	Gauge32	read-only	This object specifies the average number of roams per second for the previous 5 seconds interval within the mobility network-id.
U32 cwdsiRoamMblGrpStatsNetworkId	1.3.6.1.4.1.9.9.509.1.7.5.1.1	Unsigned32	not-accessible	This object specifies the mobility network-id of the roaming Mobile Nodes.
C32 cwdsiRoamMblGrpStatsNoAuthAaa	1.3.6.1.4.1.9.9.509.1.7.5.1.3	Counter32	read-only	This object specifies the count of roams without AAA authentications within the mobility network-id. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiRoamStatsStartTime.
G32 cwdsiRoamMblGrpStatsOneMinute	1.3.6.1.4.1.9.9.509.1.7.5.1.7	Gauge32	read-only	This object specifies the average number of roams per second for the previous 1 minute interval within the mobility network-id.
cwdsiRoamMblGrpStatsTable	1.3.6.1.4.1.9.9.509.1.7.5		not-accessible	This table provides the information about the roaming statistics per the mobility network-id. Roams per second statistics will have averages for 5 seconds, one minute and five minutes. These data will be separated by the mobility network-id and differentiated by roams with 'no AAA authentications', 'AAA authentications', and 'Fast Secured Authentications'.
C32 cwdsiRoamMblGrpStatsTotal	1.3.6.1.4.1.9.9.509.1.7.5.1.2	Counter32	read-only	This object specifies the count of total roams within the mobility network-id. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiRoamStatsStartTime.
C32 cwdsiRoamsFastSecuredCount	1.3.6.1.4.1.9.9.509.1.5.9	Counter32	read-only	This object specifies the number of fast and secured roams with CCKM. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
G32 cwdsiRoamStatsAvgFiveMinutes	1.3.6.1.4.1.9.9.509.1.7.4	Gauge32	read-only	This object specifies the system-wide average number of roams per second for the previous 5 minutes interval.
G32 cwdsiRoamStatsAvgFiveSeconds	1.3.6.1.4.1.9.9.509.1.7.2	Gauge32	read-only	This object specifies the system-wide average number of roams per second for the previous 5 seconds interval.
G32 cwdsiRoamStatsAvgOneMinute	1.3.6.1.4.1.9.9.509.1.7.3	Gauge32	read-only	This object specifies the system-wide average number of roams per second for the previous 1 minute interval.
DAT cwdsiRoamStatsStartTime	1.3.6.1.4.1.9.9.509.1.7.1	DateAndTime	read-only	This object specifies the start time and date since the statistics has been gathered.
C32 cwdsiRoamsWithFullAaaAuthCount	1.3.6.1.4.1.9.9.509.1.5.8	Counter32	read-only	This object specifies the number of roams involving full AAA authentication. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
C32 cwdsiRoamsWithoutAaaAuthCount	1.3.6.1.4.1.9.9.509.1.5.7	Counter32	read-only	This object specifies the number of roams not involving AAA authentication. Discontinuities in the value of this counter can occur at re-initialization of the WDS.
IP cwdsiWdsAddr	1.3.6.1.4.1.9.9.509.1.6.5	InetAddress	read-only	The Internet address of the network device in which WDS resides.
IPt cwdsiWdsAddrType	1.3.6.1.4.1.9.9.509.1.6.4	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiWdsAddr.
IP cwdsiWdsHsrpVirtualAddr	1.3.6.1.4.1.9.9.509.1.6.7	InetAddress	read-only	The vitrual Internet address of the WLSM when the HSRP is enabled.
IPt cwdsiWdsHsrpVirtualAddrType	1.3.6.1.4.1.9.9.509.1.6.6	InetAddressType	read-only	Represents the type of Internet address stored in the corresponding instance of the cwdsiWdsHsrpVirtualAddr.
IP cwdsiWnmAddr	1.3.6.1.4.1.9.9.509.1.4.1.1.2	InetAddress	not-accessible	The Internet address of the Wireless Network Manager.
IPt cwdsiWnmAddrType	1.3.6.1.4.1.9.9.509.1.4.1.1.1	InetAddressType	not-accessible	Represents the type of Internet address stored in the corresponding instance of the cwdsiWnmAddr.
CWD cwdsiWnmClientTracking	1.3.6.1.4.1.9.9.509.1.4.1.1.5	CWdsClientTrackingStatus	read-only	This object specifies the status of Client Tracking on WDS.
TIM cwdsiWnmDiscontinuityTime	1.3.6.1.4.1.9.9.509.1.4.1.1.15	TimeStamp	read-only	This object specifies the vaule of sysUpTime on the most recent occassion when the WNM is registered with WDS.
C32 cwdsiWnmDropMicTxMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.10	Counter32	read-only	This object specifies the number of dropped messages by WDS because of Message Integrity Check (MIC) failure before sending the messages to Wireless Network Manger. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
C32 cwdsiWnmDropRxMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.14	Counter32	read-only	This object specifies the number of messages dropped by WDS received from Wireless Network Manager. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
C32 cwdsiWnmDropUmdTxMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.11	Counter32	read-only	This object specifies the number of dropped messages by WDS because of the Unacknowledged Message Descriptor (UMD) allocation problem before sending the messages to Wireless Network Manger. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
cwdsiWnmEntry	1.3.6.1.4.1.9.9.509.1.4.1.1		not-accessible	Each entry is a set of attributes of a Wireless Network Manger and statistics. The statistics is gathered since the Wireless Network Manager has been registered with WDS.
C32 cwdsiWnmIndicatedMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.12	Counter32	read-only	This object specifies the number of indicated messages to WDS before receiving the messages from Wireless Network Manager. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
INT cwdsiWnmLinkStatus	1.3.6.1.4.1.9.9.509.1.4.1.1.4	INTEGER	read-only	This object specifies the link status between WDS and Wireless Network Manager.
C32 cwdsiWnmReqMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.6	Counter32	read-only	This object specifies the number of messages that are supposed to be sent to Wireless Network Manger. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
C32 cwdsiWnmRetryTxMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.8	Counter32	read-only	This object specifies the number of transmitted messages by WDS to Network Manger after more than one retransmission. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
C32 cwdsiWnmRxMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.13	Counter32	read-only	This object specifies the number of received messages by WDS after receiving the messages from Wireless Network Manager. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
C32 cwdsiWnmSentMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.7	Counter32	read-only	This object specifies the number of sent messages by WDS to Network Manger. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.
CWD cwdsiWnmState	1.3.6.1.4.1.9.9.509.1.4.1.1.3	CWdsDeviceState	read-only	This object specifies the registration state of the Wireless Network Manger with WDS.
cwdsiWnmTable	1.3.6.1.4.1.9.9.509.1.4.1		not-accessible	This table provides the information about the Wireless Network Managers configured on WDS. WDS provides an aggregation point of all radio management traffic from participating Access Points to the registered Wireless Network Manager. The entry also provides the statistics between WDS and Wireless Network Manager. An entry is added to this table when a Wireless Network Manager is configured on WDS. Currently WDS supports just one Wireless Network Manger.
C32 cwdsiWnmWaitingAckMsgCount	1.3.6.1.4.1.9.9.509.1.4.1.1.9	Counter32	read-only	This object specifies the number of sent messages by WDS and waiting for acknowledge response from Wireless Network Manger. Discontinuities in the value of this counter can occur at re-initialization of the WDS, and at other times as indicated by the value of cwdsiWnmDiscontinuityTime.

RFC description

Monitors Wireless Domain Services for roaming access point registration and mobile node management.

Start monitoring Cisco Wireless LAN Controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-WDS-INFO-MIB