All MIBs › CISCO-WDS-INFO-MIB › cwdsiHsrpState
cwdsiHsrpState
Module: CISCO-WDS-INFO-MIB
OID (symbolic): CISCO-WDS-INFO-MIB::cwdsiHsrpState
OID (numeric): 1.3.6.1.4.1.9.9.509.1.6.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the state of HSRP. unknown(1) - The state is unknown. disabled(2) - The HSRP is disabled. initial(3) - This is the starting state and indicates that HSRP is not running. learn(4) - The router is still waiting to hear from the active router. backup(5) - The router monitors the availability and state of the Master Router. speak(6) - The router sends periodic Hello messages and is actively participating in the election of the active and/or standby router. standby(7) - The router is a candidate to become the next active router and sends periodic Hello messages. active(8) - The router is currently forwarding packets that are sent to the group's virtual MAC address. The router sends periodic Hello messages.
What is cwdsiHsrpState?
This object reports the current HSRP state of this device, for example disabled, initial, learn, or backup, describing where it stands in the Hot Standby Router Protocol election for WDS redundancy. Administrators watch this value to know whether a given WLSM is the active HSRP router or merely a standby, which affects where WDS services are actually running. For example, seeing cwdsiHsrpState stuck at learn(4) instead of progressing to an active or backup state would tell an admin the router isn't yet hearing HSRP hellos from its peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.509.1.6.8 snmpwalk -v2c -c public <target> CISCO-WDS-INFO-MIB::cwdsiHsrpState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.509.1.6.8.1 snmpget -v2c -c public <target> CISCO-WDS-INFO-MIB::cwdsiHsrpState.1
Start monitoring Cisco Wireless LAN Controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WDS-INFO-MIB::cwdsiHsrpState OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | CISCO-WDS-INFO-MIB |
| 1.3.6.1.4.1.9.9.509.1 | ciscoWdsInfoMIBObjects | CISCO-WDS-INFO-MIB |
| 1.3.6.1.4.1.9.9.509.1.6 | ciscoWdsInfoMobility | CISCO-WDS-INFO-MIB |
| 1.3.6.1.4.1.9.9.509.1.6.8 | cwdsiHsrpState | CISCO-WDS-INFO-MIB |