All MIBs › CISCO-UNIFIED-COMPUTING-EPQOS-MIB
Organization: Cisco Systems Inc.
Last Updated: 2016-01-18
Description: MIB for endpoint QoS policy definition and lifecycle management on Cisco UCS, covering priority classifications, host control modes, and FSM-driven deployment of QoS definitions to vNIC endpoints
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-UNIFIED-COMPUTING-EPQOS-MIB?
This Cisco UCS MIB represents the EPQOS package of the UCS Manager information model, managing endpoint QoS policy definitions applied to virtual NICs (vNICs), including priority classification, host control modes, and FSM-driven deployment of QoS definitions to endpoints. It exposes configuration data (QoS definition descriptions) together with FSM fields tracking the progress and any remote-invocation errors of pushing a QoS policy out to vNIC endpoints. Its monitoring emphasis is on software/configuration deployment status - confirming that a defined QoS policy has successfully propagated to its target vNICs rather than stalling mid-deployment - which is a workflow-health concern more than a hardware sensor reading. It is part of the broader CISCO-UNIFIED-COMPUTING-MIB family and correlates with the COMPUTE and FAULT MIBs via shared distinguished names for the affected server/vNIC. Typical deployment is within UCS domains using Virtual Interface Cards (VICs), where administrators reference the CISCO-UNIFIED-COMPUTING-EPQOS-MIB MIB to centrally deploy and verify per-vNIC QoS policy.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-UNIFIED-COMPUTING-EPQOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco UCS blade servers/vNICs
- Cisco UCS Manager-managed compute domains
Monitoring Examples
cucsEpqosDefinitionTable/cucsEpqosDefinitionEntry rows, keyed by cucsEpqosDefinitionInstanceId and identified by Dn/Rn, hold cucsEpqosDefinitionDescr describing a defined QoS policy, with cucsEpqosDefinitionFsmProgr and cucsEpqosDefinitionFsmPrev tracking deployment progress to vNIC endpoints and cucsEpqosDefinitionFsmRmtInvErrCode/cucsEpqosDefinitionFsmRmtInvErrDescr surfacing any remote-invocation failure. An admin would poll these FSM fields after applying a new QoS priority policy to confirm it fully propagated to all target vNICs rather than stalling partway through deployment.
What Can Be Monitored
- endpoint QoS policy definitions
- QoS policy deployment progress (FSM state)
- QoS deployment error codes
- vNIC priority classification status
Imported Objects
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From CISCO-TC
| CiscoAlarmSeverity | |
| CiscoInetAddressMask | |
| CiscoNetworkAddress | |
| TimeIntervalSec | |
| Unsigned64 |
From CISCO-UNIFIED-COMPUTING-MIB
| CucsManagedObjectDn | |
| CucsManagedObjectId | |
| ciscoUnifiedComputingMIBObjects | OBJECT-IDENTITY |
From CISCO-UNIFIED-COMPUTING-TC-MIB
| CucsConditionRemoteInvRslt | |
| CucsEpqosDefinitionDelTaskFsmCurrentFsm | |
| CucsEpqosDefinitionDelTaskFsmStageName | |
| CucsEpqosDefinitionDelTaskFsmTaskItem | |
| CucsEpqosDefinitionFsmCurrentFsm | |
| CucsEpqosDefinitionFsmStageName | |
| CucsEpqosDefinitionFsmTaskItem | |
| CucsFsmCompletion | |
| CucsFsmFlags | |
| CucsFsmFsmStageStatus | |
| CucsPolicyPolicyOwner | |
| CucsQosHostControl | |
| CucsQosPriority |
From INET-ADDRESS-MIB
| InetAddressIPv4 | |
| InetAddressIPv6 |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowPointer | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TimeStamp | |
| TruthValue |
OIDs
RFC description
Cisco UCS end-point quality of service policy management for compute infrastructure.
Start monitoring Cisco UCS blade servers/vNICs (endpoint QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.