All MIBs › SHE-IGMP-MIB
Organization: Nokia Siemens Networks
Last Updated: 2008-09-17
Description: Nokia Siemens Networks SHE DSLAM extended IGMP management for multicast subscriber tables, preview packages, channel lists, and per-port rate limiting on ADSL/VDSL access nodes
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SHE-IGMP-MIB?
SHE-IGMP-MIB is a Nokia Siemens Networks module for the SHE (hiX-series) DSLAM access-node platform, extending standard IGMP multicast-snooping management with broadband-access-specific features for IPTV/multicast video delivery. Per its module description it defines managed objects for additional IGMP capabilities beyond the base IGMP MIB, covering subscriber multicast group/channel membership, preview packages (limited-time channel previews), channel lists, and per-port multicast rate limiting on ADSL/VDSL lines. Its data is oriented toward service/traffic monitoring rather than pure hardware health: an operator uses it to see which subscriber ports are joined to which multicast channels, whether preview-package limits are being enforced, and whether per-port rate limits are throttling multicast traffic — all indicators of IPTV service health on the access node. It extends the standard IGMP MIB family with DSLAM-specific subscriber and port-level detail. It is deployed on Nokia Siemens Networks hiX-series DSLAM/access-node hardware at the edge of broadband access networks delivering multicast IPTV. Engineers can download the SHE-IGMP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SHE-IGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia Siemens Networks SHE/hiX-series DSLAM access node
Monitoring Examples
No specific object/table names were captured in this extract, but per the module description an operator would inspect per-port multicast group membership and channel-list tables to confirm a subscriber's set-top box is correctly joined to its purchased channels, check preview-package state to see if a time-limited channel preview is active or expired, and review per-port rate-limiting configuration to catch a port throttling multicast traffic below what a subscriber's service tier requires.
What Can Be Monitored
- per-port multicast group membership
- preview package status
- channel list configuration
- per-port multicast rate limiting
This MIB depends on
Related MIBs
Imported Objects
From AN-SHE-MIB
| she | OBJECT-IDENTITY |
From SHE-BRIDGE-MIB
| sheBridgePortIndex | OBJECT-TYPE |
| sheIgmpGroupIndex | OBJECT-TYPE |
From SHE-TC-MIB
| SheControlStatusType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Gauge32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sheIgmpMib | 1.3.6.1.4.1.231.7.1.2.2.1.35 | The MIB module is to describe managed objects supporting additional IGMP features. | ||
| sheIgmpSystem | 1.3.6.1.4.1.231.7.1.2.2.1.35.1 | |||
| T/F sheIgmpProgramPreviewEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.1 | TruthValue | read-only | Indicates whether to enable the program preview functionality. |
| T/F sheIgmpLogEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.2 | TruthValue | read-only | Whether the NE should keep the IGMP log. |
| T/F sheIgmpUploadEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.3 | TruthValue | read-only | Whether the NE should upload the log files to FTP server. |
| STR sheIgmpFtpRootDir | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.4 | SnmpAdminString | read-only | The root directory name on FTP server that stores the IGMP log data of this DSLAM. It is the relative path to the ftproot, eg. 'hix5635/v1.5/dslam1/igmp' The directory structure looks like: ftproot <-- the upmost ftp root |- %FtpRootDir% <-- this value, specifies the DSLAM |
| IP sheIgmpFtpIp | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.5 | IpAddress | read-only | FTP server's IP address. |
| STR sheIgmpFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.6 | SnmpAdminString | read-only | FTP user name. Write permission is required for this user. |
| OCT sheIgmpFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.7 | OCTET STRING | read-only | FTP server access password. To protect the password, the string of this object in the GetResponse PDU is encrypted. |
| U32 sheIgmpFtpUploadInterval | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.8 | Unsigned32 | read-only | The interval that IGMP log data is uploaded to FTP server. |
| INT sheIgmpPacketRateLimitUplink | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.9 | INTEGER | read-only | IGMP packets received from the uplink port is only allowed to be processed by the IGMP proxy with a limit of this value per minute. -1 is a special value means no limit. |
| INT sheIgmpPacketRateLimitSubscriber | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.10 | INTEGER | read-only | IGMP packets received from the DSL subscriber port is only allowed to be processed by the IGMP proxy with a limit of this value per minute. -1 is a special value means no limit. |
| INT sheIgmpLongTimeOnlineTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.11 | INTEGER | read-only | For every time interval of this value, there should be a log entry sent to the FTP server for those subscribers who have joined a multicast group for more than this time interval. |
| T/F sheIgmpEthernetAccessEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.12 | TruthValue | read-only | When sheIgmpEthernetAccessEnable is true, if ethernet port of the CxU is configured as aggregate, multicast traffic could be accessed only if there's IGMP report sent from it. When sheIgmpEthernetAccessEnable is false, if ethernet port of the CxU is configured as aggregate, multicast traffic could be accessed without IGMP report. |
| sheIgmpControl | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13 | |||
| SHE sheIgmpControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.1 | SheIgmpControlRequestType | read-write | Command to configure global system parameters. It must be the last member in the varBindList of the SNMP set request. The parameters for different commands are listed below: setIgmpParameters: (optional, but at least one of them should be there) sheIgmpControlProgramPreviewEnable sheIgmpControlLogEnable sheIgmpControlUploadEnable setFtpParameters: sheIgmpControlFtpRootDir sheIgmpControlFtpIp sheIgmpControlFtpUser sheIgmpControlFtpPassword sheIgmpControlFtpUploadInterval setIgmpPacketRateLimitUplink: sheIgmpControlPacketRateLimitUplink setIgmpPacketRateLimitSubscriber: sheIgmpControlPacketRateLimitSubscriber setIgmpLongTimeOnlineTime: sheIgmpControlLongTimeOnlineTime setIgmpEthernetAccessEnable: sheIgmpControlEthernetAccessEnable resetSubscriberPreviewCountAll: manuallyUploadLog: (no parameter) Notifications: sheIgmpControlResult at the command ending in case of long running command. The long running command refers to the case that sheIgmpUploadEnable is changed from disable to enable. NE will verify the FTP connection at the enabling moment. Besides, the RootDir is created if they do not exist yet. EM should GET sheIgmpControlReqResult when the Response of the SET PDU is received, and the error status is noError. If the value of sheIgmpControlReqResult is comExecStarted(30), which means the SET operation is a long running command, EM must issue another GET operation on sheIgmpControlTimer. A timer should start on EM with the expire time equals to the value of sheIgmpControlTimer. The sheIgmpControlResult trap is expected to reach EM within the specified time. When the trap is received by EM, EM can optionally GET sheIgmpControlReqResult, sheIgmpControlStatus, and sheIgmpControlTimeStamp. |
| U32 sheIgmpControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.2 | Unsigned32 | read-only | The status of a control request. |
| U32 sheIgmpControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheIgmpControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.4 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| T/F sheIgmpControlProgramPreviewEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.6 | TruthValue | read-write | Indicates whether to enable the program preview functionality. |
| T/F sheIgmpControlLogEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.7 | TruthValue | read-write | Whether the NE should keep the IGMP log. Change the value of sheIgmpLogEnable. |
| T/F sheIgmpControlUploadEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.8 | TruthValue | read-write | Whether the FTP upload process is enabled. Change the value of sheIgmpUploadEnable. If the sheIgmpUploadEnable is changed from disable to enable, FTP connection will be verified at the enabling moment. Besides, the RootDir is created if they do not exist yet. The command in this case is a long running command. sheIgmpControlResult trap will be sent to EM to notify the command result. |
| STR sheIgmpControlFtpRootDir | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.9 | SnmpAdminString | read-write | The root directory name on FTP server that stores the IGMP log data of this DSLAM. Change the value of sheIgmpFtpRootDir. |
| IP sheIgmpControlFtpIp | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.10 | IpAddress | read-write | FTP server's IP address. Change the value of sheIgmpFtpIp. |
| STR sheIgmpControlFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.11 | SnmpAdminString | read-write | FTP user name. Change the value of sheIgmpFtpUser. |
| OCT sheIgmpControlFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.12 | OCTET STRING | read-write | FTP server access password. To protect the password, the string of this object in the GetResponse PDU is encrypted. |
| U32 sheIgmpControlFtpUploadInterval | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.13 | Unsigned32 | read-write | The interval that IGMP log data is uploaded to FTP server. Change the value of sheIgmpFtpUploadInterval. |
| INT sheIgmpControlPacketRateLimitSubscriber | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.14 | INTEGER | read-write | IGMP packets received from the DSL subscriber port is only allowed to be processed by the IGMP proxy with a limit of this value per minute. -1 is a special value means no limit. |
| INT sheIgmpControlPacketRateLimitUplink | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.15 | INTEGER | read-write | IGMP packets received from the uplink port is only allowed to be processed by the IGMP proxy with a limit of this value per minute. -1 is a special value means no limit. |
| INT sheIgmpControlLongTimeOnlineTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.16 | INTEGER | read-write | For every time interval of this value, there should be a log entry sent to the FTP server for those subscribers who have joined a multicast group for more than this time interval. |
| T/F sheIgmpControlEthernetAccessEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.1.13.17 | TruthValue | read-write | When sheIgmpEthernetAccessEnable is true, if ethernet port of the CxU is configured as aggregate, multicast traffic could be accessed only if there's IGMP report sent from it. When sheIgmpEthernetAccessEnable is false, if ethernet port of the CxU is configured as aggregate, multicast traffic could be accessed without IGMP report. |
| sheIgmpPreviewPackageTable | 1.3.6.1.4.1.231.7.1.2.2.1.35.2 | not-accessible | This table contains information of preview packages. Each entry defines a preview package. | |
| sheIgmpPreviewPackageEntry | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1 | not-accessible | Entry of the table. | |
| U32 sheIgmpPreviewPackageIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.1 | Unsigned32 | read-only | The index of the preview package. |
| STR sheIgmpPreviewPackageDescription | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.2 | SnmpAdminString | read-only | The description of this preview package. |
| U32 sheIgmpPreviewPackageLastingPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.3 | Unsigned32 | read-only | The duration (in minutes) for each preview period. |
| U32 sheIgmpPreviewPackageIntervalBetweenPreviews | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.4 | Unsigned32 | read-only | The time that a user must wait before starting next preview. |
| U32 sheIgmpPreviewPackageMaxPreviewsNum | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.5 | Unsigned32 | read-only | How many previews are allowed on a subscriber. |
| OCT sheIgmpPreviewPackageChannelList | 1.3.6.1.4.1.231.7.1.2.2.1.35.2.1.6 | OCTET STRING | read-only | The list of pairs of octets each identifying a corresponding index of the sheIgmpGroupTable (sheIgmpGroupIndex). It shows the channels that are members of this preview package. The least significant byte is the second octet. |
| sheIgmpPreviewPackageControl | 1.3.6.1.4.1.231.7.1.2.2.1.35.3 | |||
| SHE sheIgmpPreviewPackageControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.1 | SheIgmpControlRequestType | read-write | Command to configure preview package. It must be the last member in the varBindList of the SNMP set request. The parameters for different commands are listed below: createPreviewPackage: sheIgmpPreviewPackageControlLastingPeriod sheIgmpPreviewPackageControlIntervalBetweenPreviews sheIgmpPreviewPackageControlMaxPreviewsNum (optional) sheIgmpPreviewPackageControlDescription deletePreviewPackage: sheIgmpPreviewPackageControlIndex modifyPreviewPackage: (must) sheIgmpPreviewPackageControlIndex (optional, but at least one of them should be there) sheIgmpPreviewPackageControlLastingPeriod sheIgmpPreviewPackageControlIntervalBetweenPreviews sheIgmpPreviewPackageControlMaxPreviewsNum sheIgmpPreviewPackageControlDescription addChannel2PreviewPackage: deleteChannelFromPreviewPackage: sheIgmpPreviewPackageControlIndex sheIgmpPreviewPackageControlChannelIndex |
| SHE sheIgmpPreviewPackageControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.2 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheIgmpPreviewPackageControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.3 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheIgmpPreviewPackageControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.4 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpPreviewPackageControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheIgmpPreviewPackageControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.6 | Unsigned32 | read-write | The index of the preview package. |
| STR sheIgmpPreviewPackageControlDescription | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.7 | SnmpAdminString | read-write | The description of preview package. |
| U32 sheIgmpPreviewPackageControlLastingPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.8 | Unsigned32 | read-write | The duration (in minutes) for each preview period. |
| U32 sheIgmpPreviewPackageControlIntervalBetweenPreviews | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.9 | Unsigned32 | read-write | The time that a user must wait before starting next preview. |
| U32 sheIgmpPreviewPackageControlMaxPreviewsNum | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.10 | Unsigned32 | read-write | How many previews are allowed on a subscriber. |
| U32 sheIgmpPreviewPackageControlChannelIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.3.11 | Unsigned32 | read-write | The channel index that will be added to or deleted from the preview package. The value will be equal to an existing sheIgmpGroupIndex from sheBridgeMib, which represent an IgmpChannel. |
| sheIgmpSubscriberTable | 1.3.6.1.4.1.231.7.1.2.2.1.35.4 | not-accessible | Each entry in this table defines the multicast parameters for a subscriber. | |
| sheIgmpSubscriberEntry | 1.3.6.1.4.1.231.7.1.2.2.1.35.4.1 | not-accessible | Entry of the table indeced by sheBridgePortIndex. The sheBridgePortIndex is an external index defined in she-bridge-mib. | |
| U32 sheIgmpSubscriberPreviewPackageIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.4.1.4 | Unsigned32 | read-only | The index of the preview package that is applied on this subscriber. 0 means no package assigned. |
| U32 sheIgmpSubscriberPreviewRemains | 1.3.6.1.4.1.231.7.1.2.2.1.35.4.1.5 | Unsigned32 | read-only | The number of previews that are still available on this subscriber currently. The initial value of this object equals to sheIgmpPreviewPackageMaxPreviewsNum. It decreases by 1 each time when the subscriber starts a preview. If this number reaches 0, this subscriber cannot preview any more, unless this counter is reset by EM. |
| sheIgmpSubscriberControl | 1.3.6.1.4.1.231.7.1.2.2.1.35.5 | |||
| SHE sheIgmpSubscriberControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.1 | SheIgmpControlRequestType | read-write | Command to configure subscriber parameters. It must be the last member in the varBindList of the SNMP set request. The parameters for different commands are listed below: (must) sheIgmpSubscriberControlIndex setSubscriberPreviewPackage: sheIgmpSubscriberControlPreviewPackageIndex deleteSubscriberPreviewPackage: resetSubscriberPreviewRemainsCount: (no additional parameters) |
| SHE sheIgmpSubscriberControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.2 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheIgmpSubscriberControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.3 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheIgmpSubscriberControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.4 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpSubscriberControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheIgmpSubscriberControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.6 | Unsigned32 | read-write | The sheBridgePortIndex to identify a subscriber. |
| U32 sheIgmpSubscriberControlPreviewPackageIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.5.9 | Unsigned32 | read-write | The index of the preview package that is applied on this subscriber. |
| sheIgmpUploadInfo | 1.3.6.1.4.1.231.7.1.2.2.1.35.7 | |||
| SHE sheIgmpLastUploadStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.7.1 | SheIgmpUploadStatusType | read-only | The status of last FTP upload operation. It could be uploadSuccess(1) or uploadFail(2). |
| TIK sheIgmpLastUploadTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.7.2 | TimeTicks | read-only | The time stamp of the last FTP upload operation (end of operation). |
| STR sheIgmpLastUploadFileName | 1.3.6.1.4.1.231.7.1.2.2.1.35.7.3 | SnmpAdminString | read-only | The file name of last FTP upload operation. |
| STR sheIgmpLastUploadErrorString | 1.3.6.1.4.1.231.7.1.2.2.1.35.7.4 | SnmpAdminString | read-only | The text that describes the FTP upload failure. If upload succeeded, this string is empty. |
| sheIgmpNotification | 1.3.6.1.4.1.231.7.1.2.2.1.35.8 | |||
| sheIgmpEvents | 1.3.6.1.4.1.231.7.1.2.2.1.35.8.1 | |||
| NTF sheIgmpControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.8.1.1 | Notification sent at the end of long running command. The possible values of sheIgmpControlReqResult are: wrongIpAddress(2), -- IP address of FTP server is incorrect wrongUserPassword(3), -- The user name or password is wrong permissionDenied(4), -- The user name has no permission to create dir/file commandSucceeded(37), commandFailed(36) | ||
| NTF sheIgmpUploadFailedTrap | 1.3.6.1.4.1.231.7.1.2.2.1.35.8.1.2 | Indicates that an FTP upload failure occurred. | ||
| NTF sheIgmpPreviewPackageControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.8.1.3 | Notification sent at the end of preview package command. | ||
| sheIgmpParaV2 | 1.3.6.1.4.1.231.7.1.2.2.1.35.9 | |||
| U32 sheIgmpParaV2CDRTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.9.1 | Unsigned32 | read-only | This attribute indicates the value of CDR Recognition Time. Value 0 means user doesn't configure IGMP Log CDR Time and IGMP Log CDR process doesn't take effect. |
| sheIgmpParaV2Control | 1.3.6.1.4.1.231.7.1.2.2.1.35.10 | |||
| SHE sheIgmpParaV2ControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.1 | SheIgmpControlRequestType | read-write | It must be the last member in the varBindList of the SNMP set request. The commands: setIgmpCDRTime The parameter for this command is sheIgmpParaV2ControlCDRTime. |
| U32 sheIgmpParaV2ControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.2 | Unsigned32 | read-only | The status of a control request. |
| U32 sheIgmpParaV2ControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheIgmpParaV2ControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.4 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpParaV2ControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheIgmpParaV2ControlCDRTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.10.6 | Unsigned32 | read-write | This attribute indicates the value of CDR recognition time. Value 0 means user doesn't configure IGMP Log CDR Time and IGMP Log CDR process doesn't take effect. |
| sheIgmpMulticastChannelTable | 1.3.6.1.4.1.231.7.1.2.2.1.35.11 | not-accessible | This table contains information for the Bandwidth assigned to every Multicast Group. | |
| sheIgmpMulticastChannelEntry | 1.3.6.1.4.1.231.7.1.2.2.1.35.11.1 | not-accessible | Each entry contains the configured bandwidth value of a Multicast Group. The sheIgmpGroupIndex is an external index defined in she-bridge-mib. | |
| U32 sheIgmpMulticastChannelDelayLeaveTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.11.1.1 | Unsigned32 | read-only | Time interval for which the IGMP proxy 's host will delay to send a leave to the Router side when no membership is in a multicast channel. |
| sheIgmpMulticastChannelControl | 1.3.6.1.4.1.231.7.1.2.2.1.35.12 | |||
| SHE sheIgmpMulticastChannelControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.1 | SheIgmpControlRequestType | read-write | Command to set multicast channel delay leave time. It must be the last member in the varBindList of the SNMP set request. The commands: setIgmpSetMulticastChannelV2Para The Parameters of this command are sheIgmpMulticastChannelControlChannelIndex sheIgmpMulticastChannelControlDelayLeaveTime |
| U32 sheIgmpMulticastChannelControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.2 | Unsigned32 | read-only | The status of a control request. |
| SHE sheIgmpMulticastChannelControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.3 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpMulticastChannelControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.4 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheIgmpMulticastChannelControlChannelIndex | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.5 | Unsigned32 | read-write | This attribute indicates the index of the multicast group being configured. |
| U32 sheIgmpMulticastChannelControlDelayLeaveTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.12.6 | Unsigned32 | read-write | Time interval for which the IGMP proxy 's host will delay to send a leave to the Router side when no membership is in a multicast channel. |
| sheIgmpPreviewV2Para | 1.3.6.1.4.1.231.7.1.2.2.1.35.13 | |||
| T/F sheIgmpPreviewV2ParaARTEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.13.1 | TruthValue | read-only | This attribute indicates whether the preview auto reset time functionlaity is enabled. |
| DAT sheIgmpPreviewV2ParaARTStartTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.13.2 | DateAndTime | read-only | This attribute indicates the start time of auto reset timer. |
| SHE sheIgmpPreviewV2ParaARTUnit | 1.3.6.1.4.1.231.7.1.2.2.1.35.13.3 | SheIgmpPreviewAutoResetTimeUnitType | read-only | This attribute indicates the unit of the timer. |
| U32 sheIgmpPreviewV2ParaARTValue | 1.3.6.1.4.1.231.7.1.2.2.1.35.13.4 | Unsigned32 | read-only | This attribute indicates the configured value of the preview auto reset timer. The timer value will be decided together by sheIgmpPreviewAutoResetTimeValue and the sheIgmpPreviewAutoResetTimeUnit. e.g. if the sheIgmpPreviewAutoResetTimeUnit is day(1) and the sheIgmpPreviewAutoResetTimeValue is 30 then the value of auto reset timer is 30 days. |
| sheIgmpPreviewV2ParaControl | 1.3.6.1.4.1.231.7.1.2.2.1.35.14 | |||
| SHE sheIgmpPreviewV2ParaControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.1 | SheIgmpControlRequestType | read-write | Command related to the preview auto reset time. It must be the last member in the varBindList of the SNMP set request. The commands: setIgmpPreviewAutoResetTimeEnable The parameters for this command are sheIgmpPreviewV2ParaControlARTStartTime sheIgmpPreviewV2ParaControlARTEnable sheIgmpPreviewV2ParaControlARTUnit sheIgmpPreviewV2ParaControlARTValue |
| U32 sheIgmpPreviewV2ParaControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.2 | Unsigned32 | read-only | The status of a control request. |
| SHE sheIgmpPreviewV2ParaControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.3 | SheIgmpControlRequestResultType | read-only | The result of the last user command. |
| U32 sheIgmpPreviewV2ParaControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.4 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| T/F sheIgmpPreviewV2ParaControlARTEnable | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.5 | TruthValue | read-write | This attribute indicates whether the preview auto reset is enabled |
| DAT sheIgmpPreviewV2ParaControlARTStartTime | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.6 | DateAndTime | read-write | This attribute indicates the start time of the auto reset timer |
| SHE sheIgmpPreviewV2ParaControlARTUnit | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.7 | SheIgmpPreviewAutoResetTimeUnitType | read-write | This attribute indicates the unit of the preview auto reset timer |
| U32 sheIgmpPreviewV2ParaControlARTValue | 1.3.6.1.4.1.231.7.1.2.2.1.35.14.8 | Unsigned32 | read-write | This attribute indicates the value of the preview auto reset timer |
| sheIgmpMibConformance | 1.3.6.1.4.1.231.7.1.2.2.1.35.100 | |||
| sheIgmpMibCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.1 | |||
| sheIgmpMibCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.1.1 | Description. | ||
| sheIgmpMibGroups | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.2 | |||
| sheIgmpMibGroup | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.2.1 | Description. | ||
| sheIgmpMibControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.2.2 | Description. | ||
| sheIgmpMibNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.35.100.2.3 | Description. |
RFC description
Nokia Siemens Networks MIB describing IGMP features and multicast group management.
Start monitoring Nokia Siemens Networks SHE/hiX-series DSLAM access node (subscriber IPTV multicast channel/rate-limit status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.