All MIBs › CET-TSI-MIB
Organization: CE+T
Last Updated: 2007-12-05
Category: Alarm and Event Management, Satellite
Description: Manages CET/TSI satellite ground station and teleport equipment configuration and operational status monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CET-TSI-MIB?
CET-TSI-MIB is a MIB for CET's TSI product line, used to manage satellite ground station and teleport equipment such as transmission/signal interface units. It is intended to expose configuration and operational status for satellite communications ground equipment, a specialized broadcast/telecom hardware category. Its monitoring role would center on equipment operational status, such as unit health, signal or link state, and configuration parameters relevant to satellite uplink/downlink equipment, though no specific object names were captured in this extract to confirm exact coverage. It likely stands largely independent as a vendor-specific module without heavy reliance on standard IETF MIBs beyond basic SNMP framework MIBs. It is deployed in satellite teleport and ground-station facilities used by broadcasters and satellite communications operators. Engineers can download the CET-TSI-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CET-TSI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- CET TSI satellite ground station/teleport equipment
Monitoring Examples
No object names were provided in this extract, so a specific monitoring scenario cannot be grounded in real object names for this module; ground-station TSI equipment MIBs of this kind are typically polled for unit operational status and signal/link health. Because sample_objects is empty, further technical detail would require reviewing the MIB source directly.
What Can Be Monitored
- equipment operational status
- signal/link state
- configuration parameters
This MIB depends on
Related MIBs
Imported Objects
From CET-TSI-SMI
| cetMIB | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cetTSIMIB | 1.3.6.1.4.1.12551.4 | CET MIB file definition for TSI | ||
| I32 tsiACGroupACinFreq | 1.3.6.1.4.1.12551.4.1.3.2.1.11 | Integer32 | read-only | Frequency of the AC input of the group |
| I32 tsiACGroupIinAC | 1.3.6.1.4.1.12551.4.1.3.2.1.3 | Integer32 | read-only | Total current sourced from the AC input of the module belonging to that group |
| I32 tsiACGroupNbModACinOK | 1.3.6.1.4.1.12551.4.1.3.2.1.10 | Integer32 | read-only | Number of module stating that their AC input stage is fully functional |
| I32 tsiACGroupNbModKO | 1.3.6.1.4.1.12551.4.1.3.2.1.9 | Integer32 | read-only | Number of module not delivering output due to a failure in that group |
| I32 tsiACGroupNbModMO | 1.3.6.1.4.1.12551.4.1.3.2.1.8 | Integer32 | read-only | Number of module manually off in that group |
| I32 tsiACGroupNbModOK | 1.3.6.1.4.1.12551.4.1.3.2.1.7 | Integer32 | read-only | Number of module delivering output in that group |
| I32 tsiACGroupNbModSeen | 1.3.6.1.4.1.12551.4.1.3.2.1.6 | Integer32 | read-only | Number of module seen in that group |
| I32 tsiACGroupPinACVA | 1.3.6.1.4.1.12551.4.1.3.2.1.5 | Integer32 | read-only | Total power in VA sourced from the AC input of the module belonging to that group |
| I32 tsiACGroupPinACW | 1.3.6.1.4.1.12551.4.1.3.2.1.4 | Integer32 | read-only | Total power in watts sourced from the AC input of the module belonging to that group |
| tsiACGroups | 1.3.6.1.4.1.12551.4.1.3 | |||
| tsiACGroupTable | 1.3.6.1.4.1.12551.4.1.3.2 | not-accessible | Table describing the different values related to the AC groups such as voltages, currents, ... | |
| tsiACGroupTableEntry | 1.3.6.1.4.1.12551.4.1.3.2.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiACGroupTableIndex | 1.3.6.1.4.1.12551.4.1.3.2.1.1 | Integer32 | not-accessible | AC group number identifier |
| I32 tsiACGroupVinAC | 1.3.6.1.4.1.12551.4.1.3.2.1.2 | Integer32 | read-only | AC input voltage of the group |
| INT tsiACInputPresent | 1.3.6.1.4.1.12551.4.1.5.7 | INTEGER | read-only | Flag that indicates if the AC input should be considered as present or not |
| STR tsiAlarmDescription | 1.3.6.1.4.1.12551.4.1.5.4.1.5 | DisplayString | read-only | Description string of the alarm |
| tsiAlarmEntry | 1.3.6.1.4.1.12551.4.1.5.4.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiAlarmID | 1.3.6.1.4.1.12551.4.1.5.4.1.2 | Integer32 | read-only | Unique identifier number of the alarm |
| I32 tsiAlarmIndex | 1.3.6.1.4.1.12551.4.1.5.4.1.1 | Integer32 | not-accessible | The alarm entry identifier |
| tsiAlarms | 1.3.6.1.4.1.12551.4.1.5 | |||
| INT tsiAlarmSource | 1.3.6.1.4.1.12551.4.1.5.4.1.4 | INTEGER | read-only | Device responsible of the alarm |
| tsiAlarmTable | 1.3.6.1.4.1.12551.4.1.5.4 | not-accessible | Table containing the alarm present in the system | |
| DAT tsiAlarmTime | 1.3.6.1.4.1.12551.4.1.5.4.1.6 | DateAndTime | read-only | Date and time of the occurence of the alarm |
| INT tsiAlarmType | 1.3.6.1.4.1.12551.4.1.5.4.1.3 | INTEGER | read-only | Severity level of the alarm |
| tsiConfiguration | 1.3.6.1.4.1.12551.4.1.9 | |||
| STR tsiConfigurationDescription | 1.3.6.1.4.1.12551.4.1.9.1.1.4 | DisplayString | read-only | Textual description of the parameter |
| tsiConfigurationEntry | 1.3.6.1.4.1.12551.4.1.9.1.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiConfigurationID | 1.3.6.1.4.1.12551.4.1.9.1.1.2 | Integer32 | read-only | Unique identifier number associated to the parameter |
| I32 tsiConfigurationIndex | 1.3.6.1.4.1.12551.4.1.9.1.1.1 | Integer32 | not-accessible | The index of the table |
| tsiConfigurationTable | 1.3.6.1.4.1.12551.4.1.9.1 | not-accessible | Table containing the configurable parameters | |
| I32 tsiConfigurationUnits | 1.3.6.1.4.1.12551.4.1.9.1.1.5 | Integer32 | read-only | Value defining the conversion rule to apply to parameter value to obtain real value in MKS units. This value should be expressed in its hexidecimal form 0xYYWW to understand it better - The high byte YY represents the exponent of the power of 10 by wich the value should be divided - The low byte WW represents the unit in which the parameter is expressed 0 : No units 1 : Volts 2 : Amperes 3 : Hertz 4 : Second 5 : Angle (in degrees) 6 : Watt 7 : VA 8 : Percent 9 : Degree 10 : Ohm |
| STR tsiConfigurationValidity | 1.3.6.1.4.1.12551.4.1.9.1.1.6 | DisplayString | read-only | Textual description regarding the validity status of the parameter |
| I32 tsiConfigurationValue | 1.3.6.1.4.1.12551.4.1.9.1.1.3 | Integer32 | read-only | Configured value of the parameter |
| tsiConformance | 1.3.6.1.4.1.12551.4.2 | |||
| I32 tsiDCGroupIinDC | 1.3.6.1.4.1.12551.4.1.4.2.1.3 | Integer32 | read-only | Total current sourced from the DC input of the module belonging to that group |
| I32 tsiDCGroupNbModDCinOK | 1.3.6.1.4.1.12551.4.1.4.2.1.9 | Integer32 | read-only | Number of module stating that their AC input stage is fully functional |
| I32 tsiDCGroupNbModKO | 1.3.6.1.4.1.12551.4.1.4.2.1.8 | Integer32 | read-only | Number of module not delivering output due to a failure in that group |
| I32 tsiDCGroupNbModMO | 1.3.6.1.4.1.12551.4.1.4.2.1.7 | Integer32 | read-only | Number of module manually off in that group |
| I32 tsiDCGroupNbModOK | 1.3.6.1.4.1.12551.4.1.4.2.1.6 | Integer32 | read-only | Number of module delivering output in that group |
| I32 tsiDCGroupNbModSeen | 1.3.6.1.4.1.12551.4.1.4.2.1.5 | Integer32 | read-only | Number of module seen in that group |
| I32 tsiDCGroupPinDC | 1.3.6.1.4.1.12551.4.1.4.2.1.4 | Integer32 | read-only | Total power in watts sourced from the DC input of the module belonging to that group |
| tsiDCGroups | 1.3.6.1.4.1.12551.4.1.4 | |||
| tsiDCGroupTable | 1.3.6.1.4.1.12551.4.1.4.2 | not-accessible | Table describing the different values related to the DC groups such as voltages, currents, ... | |
| tsiDCGroupTableEntry | 1.3.6.1.4.1.12551.4.1.4.2.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiDCGroupTableIndex | 1.3.6.1.4.1.12551.4.1.4.2.1.1 | Integer32 | not-accessible | AC group number identifier |
| I32 tsiDCGroupVinDC | 1.3.6.1.4.1.12551.4.1.4.2.1.2 | Integer32 | read-only | DC input voltage of the group |
| tsiDeprecatedGroup | 1.3.6.1.4.1.12551.4.2.2.3 | Conformance group for TSI deprecated objects | ||
| STR tsiDigInpLabel1 | 1.3.6.1.4.1.12551.4.1.9.2 | DisplayString | read-only | Configured label associated to digital input 1 |
| STR tsiDigInpLabel2 | 1.3.6.1.4.1.12551.4.1.9.3 | DisplayString | read-only | Configured label associated to digital input 2 |
| INT tsiEPC | 1.3.6.1.4.1.12551.4.1.1.1.1.37 | INTEGER | read-only | Flag indicating if the module has an EPC converter |
| tsiEventDescription | 1.3.6.1.4.1.12551.4.1.7 | |||
| tsiEventDescriptionEntry | 1.3.6.1.4.1.12551.4.1.7.1.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiEventDescriptionIndex | 1.3.6.1.4.1.12551.4.1.7.1.1.1 | Integer32 | not-accessible | The event identifier |
| STR tsiEventDescriptionString | 1.3.6.1.4.1.12551.4.1.7.1.1.2 | DisplayString | read-only | Description string of the event |
| tsiEventDescriptionTable | 1.3.6.1.4.1.12551.4.1.7.1 | not-accessible | Table containing the event description strings | |
| tsiFunctionalGroup | 1.3.6.1.4.1.12551.4.2.2.1 | Conformance group for TSI functional supervision. | ||
| tsiMIBCompliance | 1.3.6.1.4.1.12551.4.2.1.1 | The core compliance statements for TSI agent | ||
| tsiMIBCompliances | 1.3.6.1.4.1.12551.4.2.1 | |||
| tsiMIBDeprecated | 1.3.6.1.4.1.12551.4.2.1.2 | The core compliance statements for TSI agent deprecated objects | ||
| tsiMIBGroups | 1.3.6.1.4.1.12551.4.2.2 | |||
| I32 tsiModuleACGroupNumber | 1.3.6.1.4.1.12551.4.1.1.1.1.11 | Integer32 | read-only | Label of the AC group module is belonging to |
| I32 tsiModuleACinFreq | 1.3.6.1.4.1.12551.4.1.1.1.1.24 | Integer32 | read-only | Frequency of the AC input source of the module |
| INT tsiModuleACInState | 1.3.6.1.4.1.12551.4.1.1.1.1.4 | INTEGER | read-only | Status of the module AC input stage |
| I32 tsiModuleACInStatus | 1.3.6.1.4.1.12551.4.1.1.1.1.14 | Integer32 | read-only | Event number describing AC input stage |
| INT tsiModuleACOutState | 1.3.6.1.4.1.12551.4.1.1.1.1.3 | INTEGER | read-only | Status of the module AC output stage |
| I32 tsiModuleAddress | 1.3.6.1.4.1.12551.4.1.1.1.1.6 | Integer32 | read-only | Configured address of the module |
| I32 tsiModuleDCGroupNumber | 1.3.6.1.4.1.12551.4.1.1.1.1.12 | Integer32 | read-only | Label of the DC group module is belonging to |
| INT tsiModuleDCInState | 1.3.6.1.4.1.12551.4.1.1.1.1.5 | INTEGER | read-only | Status of the module DC input stage |
| I32 tsiModuleDCInStatus | 1.3.6.1.4.1.12551.4.1.1.1.1.15 | Integer32 | read-only | Event number describing DC input stage |
| I32 tsiModuleIinAC | 1.3.6.1.4.1.12551.4.1.1.1.1.21 | Integer32 | read-only | AC input current of the module |
| I32 tsiModuleIinDC | 1.3.6.1.4.1.12551.4.1.1.1.1.26 | Integer32 | read-only | DC input current of the module |
| I32 tsiModuleInputRepartition | 1.3.6.1.4.1.12551.4.1.1.1.1.7 | Integer32 | read-only | Load repartition ratio between AC and DC Inputs (0% is AC and 100% is DC) |
| I32 tsiModuleIout | 1.3.6.1.4.1.12551.4.1.1.1.1.17 | Integer32 | read-only | Output current of the module |
| I32 tsiModuleLoadRatioVA | 1.3.6.1.4.1.12551.4.1.1.1.1.9 | Integer32 | read-only | Loading ratio regarding power in VA |
| I32 tsiModuleLoadRatioW | 1.3.6.1.4.1.12551.4.1.1.1.1.8 | Integer32 | read-only | Loading ratio regarding power in watts |
| I32 tsiModuleNominalFreqAC | 1.3.6.1.4.1.12551.4.1.1.1.1.35 | Integer32 | read-only | Nominal AC frequency of the module |
| I32 tsiModuleNominalPoutVA | 1.3.6.1.4.1.12551.4.1.1.1.1.32 | Integer32 | read-only | Nominal output power in VA of the module |
| I32 tsiModuleNominalPoutW | 1.3.6.1.4.1.12551.4.1.1.1.1.31 | Integer32 | read-only | Nominal output power in watts of the module |
| I32 tsiModuleNominalVinAC | 1.3.6.1.4.1.12551.4.1.1.1.1.33 | Integer32 | read-only | Nominal voltage of the AC input of the module |
| I32 tsiModuleNominalVinDC | 1.3.6.1.4.1.12551.4.1.1.1.1.34 | Integer32 | read-only | Nominal voltage of the DC input of the module |
| I32 tsiModulePhaseNumber | 1.3.6.1.4.1.12551.4.1.1.1.1.10 | Integer32 | read-only | Label of the phase module is belonging to |
| I32 tsiModulePinACVA | 1.3.6.1.4.1.12551.4.1.1.1.1.23 | Integer32 | read-only | Power in VA sourced from the AC input of the module |
| I32 tsiModulePinACW | 1.3.6.1.4.1.12551.4.1.1.1.1.22 | Integer32 | read-only | Power in watts sourced from the AC input of the module |
| I32 tsiModulePinDC | 1.3.6.1.4.1.12551.4.1.1.1.1.27 | Integer32 | read-only | Power in watts sourced from the DC input of the module |
| I32 tsiModulePoutVA | 1.3.6.1.4.1.12551.4.1.1.1.1.19 | Integer32 | read-only | Output power in VA of the module |
| I32 tsiModulePoutW | 1.3.6.1.4.1.12551.4.1.1.1.1.18 | Integer32 | read-only | Output power in watts of the module |
| tsiModules | 1.3.6.1.4.1.12551.4.1.1 | |||
| INT tsiModuleSeen | 1.3.6.1.4.1.12551.4.1.1.1.1.2 | INTEGER | read-only | Flag indicating if the module is seen on the communication bus or not |
| I32 tsiModuleSerialNumber | 1.3.6.1.4.1.12551.4.1.1.1.1.30 | Integer32 | read-only | Serial number of the module |
| I32 tsiModuleSoftwareVersion | 1.3.6.1.4.1.12551.4.1.1.1.1.29 | Integer32 | read-only | Software version number of the module |
| I32 tsiModuleStatus | 1.3.6.1.4.1.12551.4.1.1.1.1.13 | Integer32 | read-only | Event number describing module output stage and internal status |
| tsiModuleTable | 1.3.6.1.4.1.12551.4.1.1.1 | not-accessible | Table describing the different values related to the TSI modules such as voltages, current, status, ... | |
| tsiModuleTableEntry | 1.3.6.1.4.1.12551.4.1.1.1.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiModuleTableIndex | 1.3.6.1.4.1.12551.4.1.1.1.1.1 | Integer32 | not-accessible | Inverter identifier |
| I32 tsiModuleTemperature | 1.3.6.1.4.1.12551.4.1.1.1.1.28 | Integer32 | read-only | Temperature of the module |
| I32 tsiModuleVinAC | 1.3.6.1.4.1.12551.4.1.1.1.1.20 | Integer32 | read-only | AC input voltage of the module |
| I32 tsiModuleVinDC | 1.3.6.1.4.1.12551.4.1.1.1.1.25 | Integer32 | read-only | DC input voltage of the module |
| I32 tsiModuleVout | 1.3.6.1.4.1.12551.4.1.1.1.1.16 | Integer32 | read-only | Output voltage of the module |
| I32 tsiNbACGroupConfigured | 1.3.6.1.4.1.12551.4.1.3.1 | Integer32 | read-only | Number of AC groups configured in the system |
| I32 tsiNbDCGroupConfigured | 1.3.6.1.4.1.12551.4.1.4.1 | Integer32 | read-only | Number of DC groups configured in the system |
| I32 tsiNbMajorAlarm | 1.3.6.1.4.1.12551.4.1.5.2 | Integer32 | read-only | Number of major alarms present in the system |
| I32 tsiNbMinorAlarm | 1.3.6.1.4.1.12551.4.1.5.1 | Integer32 | read-only | Number of minor alarms present in the system |
| I32 tsiNbPhaseConfigured | 1.3.6.1.4.1.12551.4.1.2.1 | Integer32 | read-only | Number of phases configured in the system |
| tsiNotificationGroup | 1.3.6.1.4.1.12551.4.2.2.2 | The TSI MIB notification group | ||
| tsiObjects | 1.3.6.1.4.1.12551.4.1 | |||
| I32 tsiPhaseACOutFreq | 1.3.6.1.4.1.12551.4.1.2.2.1.8 | Integer32 | read-only | Frequency of the output of the phase |
| I32 tsiPhaseAvailablePowerInVA | 1.3.6.1.4.1.12551.4.1.2.2.1.17 | Integer32 | read-only | Total available power in VA in that phase By available power, we mean the total power that could be delivered to load. That's to say, the number of valid modules multiplied by nominal power (no redundancy notion here) |
| I32 tsiPhaseAvailablePowerInW | 1.3.6.1.4.1.12551.4.1.2.2.1.16 | Integer32 | read-only | Total available power in watts in that phase By available power, we mean the total power that could be delivered to load. That's to say, the number of valid modules multiplied by nominal power (no redundancy notion here) |
| I32 tsiPhaseAvailablePowerRatioVA | 1.3.6.1.4.1.12551.4.1.2.2.1.3 | Integer32 | read-only | Ratio between output load and available power in VA By available power, we mean the total power that could be delivered to load. That's to say, the number of valid modules multiplied by nominal power (no redundancy notion here) |
| I32 tsiPhaseAvailablePowerRatioW | 1.3.6.1.4.1.12551.4.1.2.2.1.2 | Integer32 | read-only | Ratio between output load and available power in watts. By available power, we mean the total power that could be delivered to load. That's to say, the number of valid modules multiplied by nominal power (no redundancy notion here) |
| I32 tsiPhaseCurrentPowerInVA | 1.3.6.1.4.1.12551.4.1.2.2.1.13 | Integer32 | read-only | Total power in VA delivered by the module belonging to that phase |
| I32 tsiPhaseCurrentPowerInW | 1.3.6.1.4.1.12551.4.1.2.2.1.12 | Integer32 | read-only | Total power in watts delivered by the module belonging to that phase |
| I32 tsiPhaseInstalledPowerInVA | 1.3.6.1.4.1.12551.4.1.2.2.1.15 | Integer32 | read-only | Total power in VA installed in that phase By installed power, we mean the total amount of power the system was designed for. That's to say, the number of valid modules minus the number of redundant modules multiplied by nominal power |
| I32 tsiPhaseInstalledPowerInW | 1.3.6.1.4.1.12551.4.1.2.2.1.14 | Integer32 | read-only | Total power in W installed in that phase By installed power, we mean the total amount of power the system was designed for. That's to say, the number of valid modules minus the number of redundant modules multiplied by nominal power |
| I32 tsiPhaseInstalledPowerRatioVA | 1.3.6.1.4.1.12551.4.1.2.2.1.5 | Integer32 | read-only | Ratio between output load and installed power in VA By installed power, we mean the total amount of power the system was designed for. That's to say, the number of valid modules minus the number of redundant modules multiplied by nominal power |
| I32 tsiPhaseInstalledPowerRatioW | 1.3.6.1.4.1.12551.4.1.2.2.1.4 | Integer32 | read-only | Ratio between output load and installed power in W By installed power, we mean the total amount of power the system was designed for. That's to say, the number of valid modules minus the number of redundant modules multiplied by nominal power |
| I32 tsiPhaseIout | 1.3.6.1.4.1.12551.4.1.2.2.1.7 | Integer32 | read-only | Output current of the phase |
| I32 tsiPhaseNbModConfigured | 1.3.6.1.4.1.12551.4.1.2.2.1.18 | Integer32 | read-only | Number of module configured in the phase |
| I32 tsiPhaseNbModKO | 1.3.6.1.4.1.12551.4.1.2.2.1.23 | Integer32 | read-only | Number of module not delivering output due to a failure in that phase |
| I32 tsiPhaseNbModMO | 1.3.6.1.4.1.12551.4.1.2.2.1.22 | Integer32 | read-only | Number of module manually off in that phase |
| I32 tsiPhaseNbModNT | 1.3.6.1.4.1.12551.4.1.2.2.1.24 | Integer32 | read-only | Number of module not seen in that phase (accordingly to tsiPhaseNbModConfigured) |
| I32 tsiPhaseNbModOK | 1.3.6.1.4.1.12551.4.1.2.2.1.21 | Integer32 | read-only | Number of module delivering output in that phase |
| I32 tsiPhaseNbModSeen | 1.3.6.1.4.1.12551.4.1.2.2.1.20 | Integer32 | read-only | Number of module seen in that phase |
| I32 tsiPhasePinACVA | 1.3.6.1.4.1.12551.4.1.2.2.1.11 | Integer32 | read-only | Total power in VA sourced from the AC input of the module belonging to that phase |
| I32 tsiPhasePinACW | 1.3.6.1.4.1.12551.4.1.2.2.1.10 | Integer32 | read-only | Total power in watts sourced from the AC input of the module belonging to that phase |
| I32 tsiPhasePinDC | 1.3.6.1.4.1.12551.4.1.2.2.1.9 | Integer32 | read-only | Total power sourced from the DC input of the module belonging to that phase |
| I32 tsiPhaseRedundancy | 1.3.6.1.4.1.12551.4.1.2.2.1.19 | Integer32 | read-only | Number of redundant module configured in the phase |
| tsiPhases | 1.3.6.1.4.1.12551.4.1.2 | |||
| tsiPhaseTable | 1.3.6.1.4.1.12551.4.1.2.2 | not-accessible | Table describing the different values related to the phases such as voltages, current, loading, ... | |
| tsiPhaseTableEntry | 1.3.6.1.4.1.12551.4.1.2.2.1 | not-accessible | The conceptual row referencing the SEQUENCE definition | |
| I32 tsiPhaseTableIndex | 1.3.6.1.4.1.12551.4.1.2.2.1.1 | Integer32 | not-accessible | Phase identifier |
| I32 tsiPhaseVout | 1.3.6.1.4.1.12551.4.1.2.2.1.6 | Integer32 | read-only | Output voltage of the phase |
| I32 tsiProgrammableRelay | 1.3.6.1.4.1.12551.4.1.5.9 | Integer32 | read-only | Event number on which the programmable alarm relay will trigger |
| INT tsiRestrained | 1.3.6.1.4.1.12551.4.1.1.1.1.36 | INTEGER | read-only | Flag indicating if the module has limited features |
| I32 tsiSaturationThreshold | 1.3.6.1.4.1.12551.4.1.5.8 | Integer32 | read-only | Ratio threshold over which the saturation alarm will be raised |
| DAT tsiT2SDateAndTime | 1.3.6.1.4.1.12551.4.1.8.3 | DateAndTime | read-only | Configured date and time of the T2S |
| tsiT2SInfo | 1.3.6.1.4.1.12551.4.1.8 | |||
| I32 tsiT2SMainSoftwareVersion | 1.3.6.1.4.1.12551.4.1.8.4 | Integer32 | read-only | Major revision software number of the T2S |
| I32 tsiT2SMaxKnownParameters | 1.3.6.1.4.1.12551.4.1.8.6 | Integer32 | read-only | Version number of TSI modules configuration parameters |
| STR tsiT2SSerialNumber | 1.3.6.1.4.1.12551.4.1.8.2 | DisplayString | read-only | Description string of the event |
| STR tsiT2SSoftwareVersion | 1.3.6.1.4.1.12551.4.1.8.1 | DisplayString | read-only | Description string of the software version |
| I32 tsiT2SSubSoftwareVersion | 1.3.6.1.4.1.12551.4.1.8.5 | Integer32 | read-only | Minor revision software number of the T2S |
| I32 tsiT2SVersionTextError | 1.3.6.1.4.1.12551.4.1.8.7 | Integer32 | read-only | Version number of TSI events description |
| I32 tsiTempoMajorRelay | 1.3.6.1.4.1.12551.4.1.5.5 | Integer32 | read-only | Temporisation of the major alarm relay |
| I32 tsiTempoMinorRelay | 1.3.6.1.4.1.12551.4.1.5.6 | Integer32 | read-only | Temporisation of the minor alarm relay |
| I32 tsiTotalAlarmNumber | 1.3.6.1.4.1.12551.4.1.5.3 | Integer32 | read-only | Total number of alarms present in the system |
| NTF tsiTrapMajorAlarmAdded | 1.3.6.1.4.1.12551.4.1.6.0.1 | This trap is sent each time a new major alarm is detected in the system | ||
| NTF tsiTrapMajorAlarmRemoved | 1.3.6.1.4.1.12551.4.1.6.0.2 | This trap is sent each time a major alarm that was present in the system disappear from it | ||
| NTF tsiTrapMinorAlarmAdded | 1.3.6.1.4.1.12551.4.1.6.0.3 | This trap is sent each time a new minor alarm is detected in the system | ||
| NTF tsiTrapMinorAlarmRemoved | 1.3.6.1.4.1.12551.4.1.6.0.4 | This trap is sent each time a minor alarm that was present in the system disappear from it | ||
| tsiTraps | 1.3.6.1.4.1.12551.4.1.6 | |||
| tsiTrapsPrefix | 1.3.6.1.4.1.12551.4.1.6.0 |
RFC description
Monitors CE+T TSI (Three-phase system interface) power distribution modules with phase, AC group, and temperature information.
Start monitoring CET/TSI satellite ground station/teleport equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.