HPIPF02TRAP-MIB

All MIBs › HPIPF02TRAP-MIB

Category: Alarm and Event Management, Device Management, Domain: Server Hardware, Hardware and Environment, Vendor: HP/HPE

Description: HP IPF (Itanium Processor Family) SNMP MIB version 2 defining trap notifications for HP Integrity server system events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPIPF02TRAP-MIB?

HPIPF02TRAP-MIB is an HP module defining SNMP trap notifications for HP Integrity servers based on the Itanium Processor Family (IPF) architecture, part of HP's NetServer/Insight Management trap ecosystem indicated by the hpnsa branch. It is a notification-focused MIB, providing an event detail string object and a set of trap definitions organized under an events subtree rather than a large set of polled data tables. Its role is squarely hardware/software fault monitoring: it delivers asynchronous alerts for system events on HP Integrity servers, such as hardware faults, environmental issues, or system-level errors, surfaced through the trap detail text. It is part of a broader HP NetServer/Insight trap MIB family and typically works alongside other HP hardware-status MIBs rather than an independent standard. It is deployed on HP Integrity (Itanium-based) servers managed by HP Systems Insight Manager or an SNMP trap receiver in enterprise data centers. Network engineers evaluating or troubleshooting this functionality can download the HPIPF02TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPIPF02TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/HPE Integrity servers (Itanium/IPF-based, e.g. Superdome and rx-series)

Monitoring Examples

A monitoring system would register to receive traps from hpIpfE0Events/hpIpf02Events and use hpIpfEvtDetailStr to extract a human-readable description of the triggering event, such as a hardware component failure or system fault message. Because this MIB is primarily trap-based rather than a polled data model, the typical use is passive: the NMS waits for a trap and logs/escalates based on the hpIpfEvtDetailStr content rather than periodically polling counters.

What Can Be Monitored

system event trap notifications
event detail description text

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpIpfE0Events	1.3.6.1.4.1.11.2.23.35
hpIpf02Events	1.3.6.1.4.1.11.2.23.45
NTF hpTemperature4	1.3.6.1.4.1.11.2.23.45.0.4			One of the temperature sensors crossed its upper non-critical threshold.
NTF hpTemperature5	1.3.6.1.4.1.11.2.23.45.0.5			One of the temperature sensors crossed its upper critical threshold.
NTF hpTemperature6	1.3.6.1.4.1.11.2.23.45.0.6			One of the temperature sensors crossed its upper non-recoverable threshold.
NTF hpEnvironment8	1.3.6.1.4.1.11.2.23.45.0.8			One of the voltage sensors crossed its lower critical threshold.
NTF hpEnvironment9	1.3.6.1.4.1.11.2.23.45.0.9			One of the voltage sensors crossed its lower non-recoverable threshold.
NTF hpEnvironment10	1.3.6.1.4.1.11.2.23.45.0.10			One of the voltage sensors crossed its upper non-critical threshold.
NTF hpEnvironment12	1.3.6.1.4.1.11.2.23.45.0.12			One of the voltage sensors crossed its upper non-recoverable threshold - Check all boards with this voltage
NTF hpChassis26	1.3.6.1.4.1.11.2.23.45.0.26			The chassis has been opened.
NTF hpSystemHW113	1.3.6.1.4.1.11.2.23.45.0.113			A SCSI cable has been removed from the hot swap cage.
NTF hpECCMemory518	1.3.6.1.4.1.11.2.23.45.0.518			Uncorrectable multi-bit ECC error has occurred in memory module
NTF hpSystemFW699	1.3.6.1.4.1.11.2.23.45.0.699			Machine Check Initiated
NTF hpSystemFW700	1.3.6.1.4.1.11.2.23.45.0.700			System firmware error
NTF hpEnvironment704	1.3.6.1.4.1.11.2.23.45.0.704			Voltage fault - Check all boards with this voltage
NTF hpEnvironment705	1.3.6.1.4.1.11.2.23.45.0.705			Voltage degraded to non-recoverable level from less severe - Check all boards with this voltage
NTF hpEnvironment706	1.3.6.1.4.1.11.2.23.45.0.706			Voltage becomes non-recoverable from either critical level or less severe level - Check all boards with this voltage
NTF hpEnvironment707	1.3.6.1.4.1.11.2.23.45.0.707			Voltage absent
NTF hpFan710	1.3.6.1.4.1.11.2.23.45.0.710			Fan speed lags
NTF hpRedundantPower720	1.3.6.1.4.1.11.2.23.45.0.720			Power supply failed or disconnected
NTF hpRedundantPower722	1.3.6.1.4.1.11.2.23.45.0.722			Power supply AC lost
NTF hpPowerSupply726	1.3.6.1.4.1.11.2.23.45.0.726			A/C Failed, disconnected, or out of range
NTF hpEnvironment728	1.3.6.1.4.1.11.2.23.45.0.728			Voltage degraded to critical level from less severe - Check all boards with this voltage
NTF hpSystemHW729	1.3.6.1.4.1.11.2.23.45.0.729			System shut-down or reset caused by sensor reading.
NTF hpBmcFirmware730	1.3.6.1.4.1.11.2.23.45.0.730			The BMC firmware did not detect the system firmware boot.
NTF hpPowerSupply731	1.3.6.1.4.1.11.2.23.45.0.731			A/C Failed, disconnected, or out of range
NTF hpRedundantPower732	1.3.6.1.4.1.11.2.23.45.0.732			The Power supply's sensors detect possible problems
NTF hpSystemHW733	1.3.6.1.4.1.11.2.23.45.0.733			Cooling unit warning
NTF hpSystemHW734	1.3.6.1.4.1.11.2.23.45.0.734			Cooling unit failure
NTF hpSystemHW735	1.3.6.1.4.1.11.2.23.45.0.735			BMC entering special mode
NTF hpSystemHW736	1.3.6.1.4.1.11.2.23.45.0.736			Watchdog timer expired - hard reset
NTF hpSystemHW737	1.3.6.1.4.1.11.2.23.45.0.737			Watchdog timer expired - power-off
NTF hpSystemHW738	1.3.6.1.4.1.11.2.23.45.0.738			Watchdog timer expired - power-cycle
NTF hpSystemHW739	1.3.6.1.4.1.11.2.23.45.0.739			Missing FRU device
NTF hpSystemHW740	1.3.6.1.4.1.11.2.23.45.0.740			Missing Entity
NTF hpSystemHW744	1.3.6.1.4.1.11.2.23.45.0.744			System event log almost full
NTF hpSystemHW745	1.3.6.1.4.1.11.2.23.45.0.745			TOC interrupt (crash dump)
NTF hpSystemHW746	1.3.6.1.4.1.11.2.23.45.0.746			INIT Initiated
NTF hpSystemHW747	1.3.6.1.4.1.11.2.23.45.0.747			PCI system error detected
NTF hpSystemHW748	1.3.6.1.4.1.11.2.23.45.0.748			OS run-time critical shutdown
NTF hpSystemHW749	1.3.6.1.4.1.11.2.23.45.0.749			ACPI state S5 (soft-off, entered by override)
NTF hpSystemHW751	1.3.6.1.4.1.11.2.23.45.0.751			PCI parity error detected
NTF hpTempHighWarning752	1.3.6.1.4.1.11.2.23.45.0.752			One of the temperature sensors crossed its lower non-critical threshold.
NTF hpTempHighCritical753	1.3.6.1.4.1.11.2.23.45.0.753			One of the temperature sensors crossed its upper critical threshold.
NTF hpTempHighNonRecoverable754	1.3.6.1.4.1.11.2.23.45.0.754			One of the temperature sensors crossed its upper non-recoverable threshold.
NTF hpTemperature755	1.3.6.1.4.1.11.2.23.45.0.755			A temperature inside the server has gone outside the factory specified range.
NTF hpTemperature756	1.3.6.1.4.1.11.2.23.45.0.756			One of the temperature sensors crossed its upper critical threshold.
NTF hpRedundantPower757	1.3.6.1.4.1.11.2.23.45.0.757			The Power Supply AC voltage was lost or is out of range.
NTF hpRedundantPower758	1.3.6.1.4.1.11.2.23.45.0.758			The AC voltage connected to the power supply is out of range.
STR hpIpfEvtDetailStr	1.3.6.1.4.1.11.2.23.45.1	DisplayString	read-only	This string provides a detailed description of the Event along with variable information.

RFC description

HP Integrity Server trap SNMP MIB for managing events and error conditions on HP servers.

Start monitoring HP/HPE Integrity servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPIPF02TRAP-MIB

What Is HPIPF02TRAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description