ALCATEL-IND1-PIM-STD-MIB

All MIBs › ALCATEL-IND1-PIM-STD-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-07-02

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch standards-compliant PIM MIB providing RFC 5060 PIM objects for multicast routing management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-PIM-STD-MIB?

ALCATEL-IND1-PIM-STD-MIB is an Alcatel-Lucent proprietary MIB (based on the IETF PIM-MIB Internet Draft) configuring and monitoring PIM (Protocol Independent Multicast) routing on Alcatel-Lucent OmniSwitch equipment. Its objects cover keepalive period, register-suppression time, (*,G)/(*,G,I)/(S,G)/(S,G,I)/(S,G,rpt) entry counts, inbound/outbound assert counts and the last-assert interface/group/source address, neighbor-loss notification period/count, invalid-register notification period/count and the offending origin/group/RP, and invalid-join/prune notification period/count. As a configuration/performance MIB it lets an administrator watch PIM neighbor stability and invalid-register/join-prune event rates to diagnose multicast routing problems. It is deployed on Alcatel-Lucent OmniSwitch equipment running PIM. Engineers can download the ALCATEL-IND1-PIM-STD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-PIM-STD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch equipment (PIM routing)

Monitoring Examples

An administrator checks alaPimNeighborLossCount and alaPimInvalidRegisterMsgsRcvd to diagnose unstable PIM multicast routing on an Alcatel-Lucent OmniSwitch.

What Can Be Monitored

PIM neighbor stability and invalid-message event counts

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Pim

OBJECT-IDENTITY

From IANA-RTPROTO-MIB

IANAipRouteProtocol

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetVersion

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using alaPimOutAsserts OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaPimOutAsserts into the Find box to locate it in the OID tree, then select it and click OK. The number of Asserts sent by this router. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaPim	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1
STO alaPimDeviceConfigStorageType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.48	StorageType	read-write	The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage type takes the value 'permanent', write-access to the listed objects need not be allowed. The objects described by this storage type are: alaPimKeepalivePeriod, alaPimRegisterSuppressionTime, alaPimNeighborLossNotificationPeriod, alaPimInvalidRegisterNotificaationPeriod, alaPimInvalidJoinPruneNotificationPeriod, alaPimRPMappingNotificationPeriod, alaPimInterfaceElectionNotificationPeriod and alaPimRefreshInterval.
alaPimDeviceStorageGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.15			An object that specifies the volatility of global PIM configuration settings on this device.
alaPimDiagnosticsGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.13			Objects providing additonal diagnostics related to a PIM router.
alaPimDmGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.14			A collection of objects required for management of PIM Dense Mode (PIM-DM) function. The groups alaPimSsmGroup and alaPimSmGroup are also required.
IPt alaPimGroupMappingAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.2	InetAddressType	not-accessible	The address type of the IP multicast group prefix.
alaPimGroupMappingEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1		not-accessible	An entry (conceptual row) in the alaPimGroupMappingTable.
IP alaPimGroupMappingGrpAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.3	InetAddress	not-accessible	The IP multicast group address which, when combined with alaPimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the alaPimGroupMappingAddressType object. This address object is only significant up to alaPimGroupMappingGrpPrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry.
ADR alaPimGroupMappingGrpPrefixLength	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.4	InetAddressPrefixLength	not-accessible	The multicast group prefix length, which, when combined with alaPimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the alaPimGroupMappingAddressType object. If alaPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If alaPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128.
NUM alaPimGroupMappingOrigin	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.1	AlaPimGroupMappingOriginType	not-accessible	The mechanism by which this group mapping was learned.
ALA alaPimGroupMappingPimMode	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.7	AlaPimMode	read-only	The PIM mode to be used for groups in this group prefix.
U32 alaPimGroupMappingPrecedence	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.8	Unsigned32	read-only	The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero denoting the highest precedence. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers.
IP alaPimGroupMappingRPAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.6	InetAddress	not-accessible	The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the alaPimGroupMappingRPAddressType object.
IPt alaPimGroupMappingRPAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.5	InetAddressType	not-accessible	The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object must be unknown(0) if alaPimGroupMappingPimMode is ssm(2) or dm(5), or if alaPimGroupMappingOrigin is embedded(6).
alaPimGroupMappingTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13		not-accessible	The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this table are created for a variety of reasons, indicated by the value of the alaPimGroupMappingOrigin object. - Rows with a alaPimGroupMappingOrigin value of 'fixed' are created automatically by the router at startup, to correspond to the well-defined prefixes of link-local and unroutable group addresses. These rows are never destroyed. - Rows with a alaPimGroupMappingOrigin value of 'embedded' are created by the router to correspond to group prefixes that are to be treated as being in Embedded-RP format. - Rows with a alaPimGroupMappingOrigin value of 'configRp' are created and destroyed as a result of rows in the alaPimStaticRPTable being created and destroyed. - Rows with a alaPimGroupMappingOrigin value of 'configSsm' are created and destroyed as a result of configuration of SSM address ranges to the local router. - Rows with a alaPimGroupMappingOrigin value of 'bsr' are created as a result of running the PIM Bootstrap Router (BSR) mechanism. If the local router is not the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages received from the elected BSR. If the local router is the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages that the local router sends. In either case, these rows are destroyed when the group prefixes are timed out by the BSR mechanism. - Rows with a alaPimGroupMappingOrigin value of 'other' are created and destroyed according to some other mechanism not specified here. Given the collection of rows in this table at any point in time, the PIM mode and RP address to use for a particular group is determined using the following algorithm. 1. From the set of all rows, the subset whose group prefix contains the group in question are selected. 2. If there are no such rows, the behavior is undefined. 3. From the selected subset of rows, the subset that have the greatest value of alaPimGroupMappingGrpPrefixLength are selected. 4. If there are multiple selected rows, and a subset are defined by alaPimStaticRPTable (alaPimGroupMappingOrigin value of 'configRp') with alaPimStaticRPOverrideDynanic set to TRUE, then this subset is selected. 5. If there are still multiple selected rows, the subset that have the highest precedence (the lowest numerical value for alaPimGroupMappingPrecedence) are selected. 6. If there are still multiple selected rows, the row selected is implementation dependent; the implementation might or might not apply the PIM hash function to select the row. 7. The group mode to use is given by the value of alaPimGroupMappingPimMode from the single selected row; the RP to use is given by the value of alaPimGroupMappingRPAddress, unless alaPimGroupMappingOrigin is 'embedded', in which case the RP is extracted from the group address in question.
C64 alaPimInAsserts	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.23	Counter64	read-only	The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an assert, not only those routers that are contesting the assert. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
IP alaPimInterfaceAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.4	InetAddress	read-only	The primary IP address of this router on this PIM interface. The InetAddressType is given by the alaPimInterfaceAddressType object.
IPt alaPimInterfaceAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.3	InetAddressType	read-only	The address type of this PIM interface.
T/F alaPimInterfaceBidirCapable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.21	TruthValue	read-only	Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option.
U32 alaPimInterfaceDFElectionRobustness	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.14	Unsigned32	read-create	The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail.
T/F alaPimInterfaceDomainBorder	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.22	TruthValue	read-create	Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use.
IP alaPimInterfaceDR	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.6	InetAddress	read-only	The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the alaPimInterfaceAddressType object.
U32 alaPimInterfaceDRPriority	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.7	Unsigned32	read-create	The Designated Router Priority value inserted into the DR Priority option on this interface. Numerically higher values for this object indicate higher priorities.
T/F alaPimInterfaceDRPriorityEnabled	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.8	TruthValue	read-only	Evaluates to TRUE if all routers on this interface are using the DR Priority option.
U32 alaPimInterfaceEffectOverrideIvl	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.19	Unsigned32	read-only	The Effective Override Interval on this interface. This object is always 2500 if alaPimInterfaceLanDelayEnabled is FALSE.
U32 alaPimInterfaceEffectPropagDelay	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.18	Unsigned32	read-only	The Effective Propagation Delay on this interface. This object is always 500 if alaPimInterfaceLanDelayEnabled is FALSE.
NTF alaPimInterfaceElection	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.5			A alaPimInterfaceElection notification signifies that a new DR or DR has been elected on a network. This notification is generated whenever the counter alaPimInterfaceElectionsWinCount is incremented, subject to the rate limit specified by alaPimInterfaceElectionNotificationPeriod.
U32 alaPimInterfaceElectionNotificationPeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.45	Unsigned32	read-write	The minimum time that must elapse between alaPimInterfaceElection notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInterfaceElection notifications are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType.
C32 alaPimInterfaceElectionWinCount	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.46	Counter32	read-only	The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces, as triggered Hellos establish adjacencies. This counter is not incremented for elections on an interface until the first periodic Hello has been sent. If this router is the DR or DF at the time of sending the first periodic Hello after interface activation, then this counter is incremented (once) at that time. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
alaPimInterfaceEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1		not-accessible	An entry (conceptual row) in the alaPimInterfaceTable. This entry is preserved on agent restart.
U32 alaPimInterfaceGenerationIDValue	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.5	Unsigned32	read-only	The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface.
U32 alaPimInterfaceGraftRetryInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.25	Unsigned32	read-create	The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by PIM-DM.
U32 alaPimInterfaceHelloHoldtime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.11	Unsigned32	read-create	The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of alaPimInterfaceHelloInterval, or 65535 if alaPimInterfaceHelloInterval is set to zero.
U32 alaPimInterfaceHelloInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.9	Unsigned32	read-create	The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Hello messages should not be sent on this interface.
NUM alaPimInterfaceIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex value of this PIM interface.
INE alaPimInterfaceIPVersion	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.2	InetVersion	not-accessible	The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g. IPv4 and IPv6, however the traffic is considered to be logically separate.
U32 alaPimInterfaceJoinPruneHoldtime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.13	Unsigned32	read-create	The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of alaPimInterfaceJoinPruneInterval, or 65535 if alaPimInterfaceJoinPruneInterval is set to zero. PIM-DM implementations are recommended to use the value of alaPimInterfacePruneLimitInterval.
U32 alaPimInterfaceJoinPruneInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.12	Unsigned32	read-create	The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Join/Prune messages should not be sent on this interface.
T/F alaPimInterfaceLanDelayEnabled	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.15	TruthValue	read-only	Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option.
U32 alaPimInterfaceOverrideInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.17	Unsigned32	read-create	The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overriding a prune, PIM routers pick a random timer duration up to the value of this object. The more PIM routers that are active on a network, the more likely it is that the prune will be overridden after a small proportion of this time has elapsed. The more PIM routers are active on this network, the larger this object should be to obtain an optimal spread of prune override latencies.
U32 alaPimInterfacePropagationDelay	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.16	Unsigned32	read-create	The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages sent on this interface. Implementations should enforce a lower bound on the permitted values for this object to allow for scheduling and processing delays within the local router.
U32 alaPimInterfacePruneLimitInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.24	Unsigned32	read-create	The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM.
T/F alaPimInterfaceSRPriorityEnabled	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.26	TruthValue	read-only	Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM.
ROW alaPimInterfaceStatus	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.27	RowStatus	read-create	The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to active(1) without setting any other columnar objects in this entry. All writeable objects in this entry can be modified when the status of this entry is active(1).
STO alaPimInterfaceStorageType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.28	StorageType	read-create	The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
T/F alaPimInterfaceStubInterface	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.23	TruthValue	read-create	Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are ignored. Setting this object to TRUE is a security measure for interfaces towards untrusted hosts. This allows an interface to be configured for use with IGMP (Internet Group Management Protocol) or MLD (Multicast Listener Discovery) only, which protects the PIM router from forged PIM messages on the interface. To communicate with other PIM routers using this interface, this object must remain set to FALSE. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated.
T/F alaPimInterfaceSuppressionEnabled	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.20	TruthValue	read-only	Whether join suppression is enabled on this interface. This object is always TRUE if alaPimInterfaceLanDelayEnabled is FALSE.
alaPimInterfaceTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1		not-accessible	The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table.
U32 alaPimInterfaceTrigHelloInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.10	Unsigned32	read-create	The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIM Hello messages should always be sent immediately.
NTF alaPimInvalidJoinPrune	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.3			A alaPimInvalidJoinPrune notification signifies that an invalid PIM Join/Prune message was received by this device. This notification is generated whenever the counter alaPimInvalidJoinPruneMsgsRcvd is incremented, subject to the rate limit specified by alaPimInvalidJoinPruneNotificationPeriod.
IPt alaPimInvalidJoinPruneAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.39	InetAddressType	read-only	The address type stored in alaPimInvalidJoinPruneOrigin, alaPimInvalidJoinPruneGroup and alaPimInvalidJoinPruneRp. If no unexpected Join/Prune messages have been received, this object is set to unknown(0).
IP alaPimInvalidJoinPruneGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.41	InetAddress	read-only	The IP multicast group address carried in the last unexpected Join/Prune message received by this device.
C32 alaPimInvalidJoinPruneMsgsRcvd	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.38	Counter32	read-only	The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if either o the Group to RP mapping specified by this message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Join/Prune (*,G) or (S,G,rpt) implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object alaPimGroupMappingPimMode. If there is no such mapping, then the object alaPimGroupMappingPimMode is absent. The RP address contained in the invalid Join/Prune is alaPimInvalidJoinPruneRp. Invalid Join/Prune messages are discarded. This may result in loss of multicast data affecting listeners downstream of alaPimInvalidJoinPruneOrigin, for multicast data addressed to alaPimInvalidJoinPruneGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
U32 alaPimInvalidJoinPruneNotificationPeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.37	Unsigned32	read-write	The minimum time that must elapse between alaPimInvalidJoinPrune notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInvalidJoinPrune notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the control plane to the network management plane. The storage type of this object is determined by alaPimDeviceConfigStorageType.
IP alaPimInvalidJoinPruneOrigin	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.40	InetAddress	read-only	The source address of the last unexpected Join/Prune message received by this device.
IP alaPimInvalidJoinPruneRp	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.42	InetAddress	read-only	The RP address carried in the last unexpected Join/Prune message received by this device.
NTF alaPimInvalidRegister	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.2			A alaPimInvalidRegister notification signifies that an invalid PIM Register message was received by this device. This notification is generated whenever the counter alaPimInvalidRegisterMsgsRcvd is incremented, subject to the rate limit specified by alaPimInvalidRegisterNotificationPeriod.
IPt alaPimInvalidRegisterAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.33	InetAddressType	read-only	The address type stored in alaPimInvalidRegisterOrigin, alaPimInvalidRegisterGroup and alaPimInvalidRegisterRp. If no unexpected Register messages have been received, then this object is set to unknown(0).
IP alaPimInvalidRegisterGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.35	InetAddress	read-only	The IP multicast group address to which the last unexpected Register message received by this device was addressed.
C32 alaPimInvalidRegisterMsgsRcvd	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32	Counter32	read-only	The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o the destination address of the Register message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Register implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object alaPimGroupMappingPimMode. If there is no such mapping, then the object alaPimGroupMappingPimMode is absent. The RP address contained in the invalid Register is alaPimInvalidRegisterRp. Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to alaPimInvalidRegisterOrigin, and is addressed to alaPimInvalidRegisterGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
U32 alaPimInvalidRegisterNotificationPeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.31	Unsigned32	read-write	The minimum time that must elapse between alaPimInvalidRegister notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimInvalidRegister notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the data and control planes to the network management plane. The storage type of this object is determined by alaPimDeviceConfigStorageType.
IP alaPimInvalidRegisterOrigin	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.34	InetAddress	read-only	The source address of the last unexpected Register message received by this device.
IP alaPimInvalidRegisterRp	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.36	InetAddress	read-only	The RP address to which the last unexpected Register message received by this device was delivered.
U32 alaPimKeepalivePeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.14	Unsigned32	read-write	The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of explicit (S,G) local membership or (S,G) join messages received to maintain it. This timer period is called the Keepalive_Period in the PIM-SM specification. It is called the SourceLifetime in the PIM-DM specification. The storage type of this object is determined by alaPimDeviceConfigStorageType.
IP alaPimLastAssertGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.26	InetAddress	read-only	The multicast group address in the most recently sent or received assert. The InetAddressType is given by the alaPimLastAssertGroupAddressType object.
IPt alaPimLastAssertGroupAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.25	InetAddressType	read-only	The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or received an assert then this object is set to unknown(0).
NUM alaPimLastAssertInterface	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.24	InterfaceIndexOrZero	read-only	The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an assert.
IP alaPimLastAssertSourceAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.28	InetAddress	read-only	The multicast source address in the most recently sent or received assert. The InetAddressType is given by the alaPimLastAssertSourceAddressType object.
IPt alaPimLastAssertSourceAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.27	InetAddressType	read-only	The address type of the multicast source address in the most recently sent or received assert. If the most recent assert was (*,G), or if this router has not sent or received an assert, then this object is set to unknown(0).
alaPimMIBComplianceAsm	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.1.1			The compliance statement for the PIM-SM MIB.
alaPimMIBComplianceDm	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.1.4			The compliance statement for PIM-DM MIB.
alaPimMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.1
alaPimMIBComplianceSsm	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.1.3			The compliance statement for PIM SSM MIB.
alaPimMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2
alaPimMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2
IP alaPimNbrSecAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.4	InetAddress	read-only	The secondary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNbrSecAddressType object.
alaPimNbrSecAddressEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1		not-accessible	An entry (conceptual row) in the alaPimNbrSecAddressTable.
NUM alaPimNbrSecAddressIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.1	InterfaceIndex	not-accessible	The value of ifIndex for the interface used to reach this PIM neighbor.
IP alaPimNbrSecAddressPrimary	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.3	InetAddress	not-accessible	The primary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNbrSecAddressType object.
alaPimNbrSecAddressTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3		not-accessible	The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the alaPimNeighborTable defined above).
IPt alaPimNbrSecAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.2	InetAddressType	not-accessible	The address type of this PIM neighbor.
IP alaPimNeighborAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.3	InetAddress	not-accessible	The primary IP address of this PIM neighbor. The InetAddressType is given by the alaPimNeighborAddressType object.
IPt alaPimNeighborAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.2	InetAddressType	not-accessible	The address type of this PIM neighbor.
T/F alaPimNeighborBidirCapable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.14	TruthValue	read-only	Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option.
U32 alaPimNeighborDRPriority	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.9	Unsigned32	read-only	The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if alaPimNeighborDRPriorityPresent is FALSE.
T/F alaPimNeighborDRPriorityPresent	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.8	TruthValue	read-only	Evaluates to TRUE if this neighbor is using the DR Priority option.
alaPimNeighborEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1		not-accessible	An entry (conceptual row) in the alaPimNeighborTable.
TIK alaPimNeighborExpiryTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.7	TimeTicks	read-only	The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out.
T/F alaPimNeighborGenerationIDPresent	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.4	TruthValue	read-only	Evaluates to TRUE if this neighbor is using the Generation ID option.
U32 alaPimNeighborGenerationIDValue	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.5	Unsigned32	read-only	The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if alaPimNeighborGenerationIDPresent is FALSE.
NUM alaPimNeighborIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.1	InterfaceIndex	not-accessible	The value of ifIndex for the interface used to reach this PIM neighbor.
T/F alaPimNeighborLanPruneDelayPresent	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.10	TruthValue	read-only	Evaluates to TRUE if this neighbor is using the LAN Prune Delay option.
NTF alaPimNeighborLoss	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.1			A alaPimNeighborLoss notification signifies the loss of an adjacency with a neighbor. This notification should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This notification is generated whenever the counter alaPimNeighborLossCount is incremented, subject to the rate limit specified by alaPimNeighborLossNotificationPeriod.
C32 alaPimNeighborLossCount	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.30	Counter32	read-only	The number of neighbor loss events that have occurred. This count is incremented when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This counter is incremented whenever a alaPimNeighborLoss notification would be generated. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
U32 alaPimNeighborLossNotificationPeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.29	Unsigned32	read-write	The minimum time that must elapse between alaPimNeighborLoss notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in which case no alaPimNeighborLoss traps are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType.
U32 alaPimNeighborOverrideInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.13	Unsigned32	read-only	The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if alaPimNeighborLanPruneDelayPresent is FALSE.
U32 alaPimNeighborPropagationDelay	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.12	Unsigned32	read-only	The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if alaPimNeighborLanPruneDelayPresent is FALSE.
T/F alaPimNeighborSRCapable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.15	TruthValue	read-only	Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM.
alaPimNeighborTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2		not-accessible	The (conceptual) table listing the router's PIM neighbors.
T/F alaPimNeighborTBit	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.11	TruthValue	read-only	Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if alaPimNeighborLanPruneDelayPresent is FALSE.
TIK alaPimNeighborUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.6	TimeTicks	read-only	The time since this PIM neighbor (last) became a neighbor of the local router.
alaPimNetMgmtNotificationGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.12			A collection of notifications for signaling PIM network management events.
alaPimNetMgmtNotificationObjects	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.11			A collection of objects to support notification of PIM network management events.
alaPimNotificationGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.2			A collection of notifications for signaling important PIM events.
alaPimNotifications	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0
C64 alaPimOutAssertsEx	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.22	Counter64	read-only	The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
U32 alaPimRefreshInterval	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.47	Unsigned32	read-write	The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used only by PIM-DM. The storage type of this object is determined by alaPimDeviceConfigStorageType.
U32 alaPimRegisterSuppressionTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.15	Unsigned32	read-write	The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. This object is used to run timers both at the DR and at the RP. This timer period is called the Register_Suppression_Time in the PIM-SM specification. The storage type of this object is determined by alaPimDeviceConfigStorageType.
alaPimRouterStatisticsGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.4			A collection of statistics global to the PIM router.
alaPimRPConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.6			A collection of objects to support configuration of RPs (Rendezvous Points) and Group Mappings.
NTF alaPimRPMappingChange	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.4			A alaPimRPMappingChange notification signifies a change to the active RP mapping on this device. This notification is generated whenever the counter alaPimRPMappingChangeCount is incremented, subject to the rate limit specified by alaPimRPMappingChangeNotificationPeriod.
C32 alaPimRPMappingChangeCount	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.44	Counter32	read-only	The number of changes to active RP mappings on this device. Information about active RP mappings is available in alaPimGroupMappingTable. Only changes to active mappings cause this count to be incremented. That is, changes that modify the alaPimGroupMappingEntry with the highest precedence for a group (lowest value of alaPimGroupMappingPrecedence). Such changes may result from manual configuration of this device, or from automatic RP mapping discovery methods including the PIM Bootstrap Router (BSR) mechanism. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
U32 alaPimRPMappingNotificationPeriod	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.43	Unsigned32	read-write	The minimum time that must elapse between alaPimRPMappingChange notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no alaPimRPMappingChange notifications are ever sent. The storage type of this object is determined by alaPimDeviceConfigStorageType.
IPt alaPimSGAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.1	InetAddressType	not-accessible	The address type of the source and multicast group for this entry.
INT alaPimSGDRRegisterState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.19	INTEGER	read-only	Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification. This object is always 'noInfo' unless alaPimSGPimMode is 'asm'.
TIK alaPimSGDRRegisterStopTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.20	TimeTicks	read-only	If alaPimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If alaPimSGDRRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification.
G32 alaPimSGEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.18	Gauge32	read-only	The number of entries in the alaPimSGTable.
alaPimSGEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1		not-accessible	An entry (conceptual row) in the alaPimSGTable.
IP alaPimSGGrpAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.2	InetAddress	not-accessible	The multicast group address for this entry. The InetAddressType is given by the alaPimSGAddressType object.
INT alaPimSGIAssertState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.7	INTEGER	read-only	The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification.
TIK alaPimSGIAssertTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.8	TimeTicks	read-only	If alaPimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If alaPimSGIAssertState is 'iAmAssertLoser', this is the time remaining before the (S,G) Assert state expires. If alaPimSGIAssertState is 'noInfo', this is zero. This timer is called the (S,G) Assert Timer in the PIM-SM specification.
IP alaPimSGIAssertWinnerAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.10	InetAddress	read-only	If alaPimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the alaPimSGIAssertWinnerAddressType object.
IPt alaPimSGIAssertWinnerAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.9	InetAddressType	read-only	If alaPimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0).
U32 alaPimSGIAssertWinnerMetric	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.12	Unsigned32	read-only	If alaPimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero.
U32 alaPimSGIAssertWinnerMetricPref	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.11	Unsigned32	read-only	If alaPimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero.
G32 alaPimSGIEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.19	Gauge32	read-only	The number of entries in the alaPimSGITable.
alaPimSGIEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1		not-accessible	An entry (conceptual row) in the alaPimSGITable.
NUM alaPimSGIIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface that this entry corresponds to.
TIK alaPimSGIJoinExpiryTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.6	TimeTicks	read-only	The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time. This timer is called the (S,G) Prune Timer in the PIM-DM specification.
INT alaPimSGIJoinPruneState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.4	INTEGER	read-only	The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specification.
T/F alaPimSGILocalMembership	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.3	TruthValue	read-only	Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(S,G,I) in the PIM-SM specification.
TIK alaPimSGIPrunePendingTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.5	TimeTicks	read-only	The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (S,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running.
alaPimSGITable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7		not-accessible	The (conceptual) table listing the interface-specific (S,G) state that PIM has.
TIK alaPimSGIUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.2	TimeTicks	read-only	The time since this entry was created by the local router.
TIK alaPimSGKeepaliveTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.18	TimeTicks	read-only	The time remaining before, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it, this (S,G) state expires. This timer is called the (S,G) Keepalive Timer in the PIM-SM specification.
INT alaPimSGOriginatorState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.25	INTEGER	read-only	Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM.
ALA alaPimSGPimMode	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.5	AlaPimMode	read-only	Whether alaPimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM), or DM (Dense Mode) group.
NUM alaPimSGRPFIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.9	InterfaceIndexOrZero	read-only	The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown.
IP alaPimSGRPFNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.11	InetAddress	read-only	The address of the RPF next hop towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM specification.
IPt alaPimSGRPFNextHopType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.10	InetAddressType	read-only	The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown.
IP alaPimSGRPFRouteAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.13	InetAddress	read-only	The IP address which when combined with the corresponding value of alaPimSGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType object. This address object is only significant up to alaPimSGRPFRoutePrefixLength bits. The remainder of the address bits are zero.
U32 alaPimSGRPFRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.16	Unsigned32	read-only	The routing metric of the route used to find the RPF interface towards the source.
U32 alaPimSGRPFRouteMetricPref	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.15	Unsigned32	read-only	The metric preference of the route used to find the RPF interface towards the source.
ADR alaPimSGRPFRoutePrefixLength	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.14	InetAddressPrefixLength	read-only	The prefix length which when combined with the corresponding value of alaPimSGRPFRouteAddress identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the alaPimSGRPFNextHopType object.
IAN alaPimSGRPFRouteProtocol	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.12	IANAipRouteProtocol	read-only	The routing mechanism via which the route used to find the RPF interface towards the source was learned.
IP alaPimSGRPRegisterPMBRAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.22	InetAddress	read-only	The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the alaPimSGRPRegisterPMBRAddressType object.
IPt alaPimSGRPRegisterPMBRAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.21	InetAddressType	read-only	The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is not the RP for the group.
G32 alaPimSGRptEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.20	Gauge32	read-only	The number of entries in the alaPimSGRptTable.
alaPimSGRptEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1		not-accessible	An entry (conceptual row) in the alaPimSGRptTable.
G32 alaPimSGRptIEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.21	Gauge32	read-only	The number of entries in the alaPimSGRptITable.
alaPimSGRptIEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1		not-accessible	An entry (conceptual row) in the alaPimSGRptITable.
NUM alaPimSGRptIIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface that this entry corresponds to.
INT alaPimSGRptIJoinPruneState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.4	INTEGER	read-only	The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification.
T/F alaPimSGRptILocalMembership	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.3	TruthValue	read-only	Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_exclude(S,G,I) in the PIM-SM specification.
TIK alaPimSGRptIPruneExpiryTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.6	TimeTicks	read-only	The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time.
TIK alaPimSGRptIPrunePendingTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.5	TimeTicks	read-only	The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running.
alaPimSGRptITable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9		not-accessible	The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has.
TIK alaPimSGRptIUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.2	TimeTicks	read-only	The time since this entry was created by the local router.
IP alaPimSGRptSrcAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.1	InetAddress	not-accessible	The source address for this entry. The InetAddressType is given by the alaPimStarGAddressType object.
alaPimSGRptTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8		not-accessible	The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has.
TIK alaPimSGRptUpstreamOverrideTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.4	TimeTicks	read-only	The time remaining before the local router sends a triggered (S,G,rpt) Join message on alaPimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification. This object is zero if the timer is not running.
INT alaPimSGRptUpstreamPruneState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.3	INTEGER	read-only	Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification.
TIK alaPimSGRptUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.2	TimeTicks	read-only	The time since this entry was created by the local router.
TIK alaPimSGSourceActiveTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.26	TimeTicks	read-only	If alaPimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specification. This object is used only by PIM-DM.
T/F alaPimSGSPTBit	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.17	TruthValue	read-only	Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree.
IP alaPimSGSrcAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.3	InetAddress	not-accessible	The source address for this entry. The InetAddressType is given by the alaPimSGAddressType object.
TIK alaPimSGStateRefreshTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.27	TimeTicks	read-only	If alaPimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specification. This object is used only by PIM-DM.
alaPimSGTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6		not-accessible	The (conceptual) table listing the non-interface specific (S,G) state that PIM has.
INT alaPimSGUpstreamJoinState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.6	INTEGER	read-only	Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification.
TIK alaPimSGUpstreamJoinTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.7	TimeTicks	read-only	The time remaining before the local router next sends a periodic (S,G) Join message on alaPimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running.
IP alaPimSGUpstreamNeighbor	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.8	InetAddress	read-only	The primary address of the neighbor on alaPimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is given by the alaPimSGAddressType object. This address is called RPF'(S,G) in the PIM-SM specification.
TIK alaPimSGUpstreamPruneLimitTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.24	TimeTicks	read-only	The time remaining before the local router may send a (S,G) Prune message on alaPimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not running. This object is used only by PIM-DM.
INT alaPimSGUpstreamPruneState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.23	INTEGER	read-only	Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM.
TIK alaPimSGUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.4	TimeTicks	read-only	The time since this entry was created by the local router.
alaPimSmGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.7			A collection of objects to support management of PIM routers running PIM-SM (Sparse Mode). The groups alaPimSsmGroup and alaPimRPConfigGroup are also required.
alaPimSsmGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.5			A collection of objects to support management of PIM routers running the PIM SSM (Source Specific Multicast) protocol, in PIM mode SM (Sparse Mode).
IPt alaPimStarGAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.1	InetAddressType	not-accessible	The address type of this multicast group.
G32 alaPimStarGEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.16	Gauge32	read-only	The number of entries in the alaPimStarGTable.
alaPimStarGEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1		not-accessible	An entry (conceptual row) in the alaPimStarGTable.
IP alaPimStarGGrpAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.2	InetAddress	not-accessible	The multicast group address. The InetAddressType is given by the alaPimStarGAddressType object.
INT alaPimStarGIAssertState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.7	INTEGER	read-only	The (,G) Assert state for this interface. This corresponds to the state of the per-interface (,G) Assert state machine in the PIM-SM specification. If alaPimStarGPimMode is 'bidir', this object must be 'noInfo'.
TIK alaPimStarGIAssertTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.8	TimeTicks	read-only	If alaPimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (,G) Assert message on this interface. If alaPimStarGIAssertState is 'iAmAssertLoser', this is the time remaining before the (,G) Assert state expires. If alaPimStarGIAssertState is 'noInfo', this is zero. This timer is called the (*,G) Assert Timer in the PIM-SM specification.
IP alaPimStarGIAssertWinnerAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.10	InetAddress	read-only	If alaPimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the alaPimStarGIAssertWinnerAddressType object.
IPt alaPimStarGIAssertWinnerAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.9	InetAddressType	read-only	If alaPimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0).
U32 alaPimStarGIAssertWinnerMetric	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.12	Unsigned32	read-only	If alaPimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero.
U32 alaPimStarGIAssertWinnerMetricPref	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.11	Unsigned32	read-only	If alaPimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero.
G32 alaPimStarGIEntries	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.17	Gauge32	read-only	The number of entries in the alaPimStarGITable.
alaPimStarGIEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1		not-accessible	An entry (conceptual row) in the alaPimStarGITable.
NUM alaPimStarGIIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface that this entry corresponds to.
TIK alaPimStarGIJoinExpiryTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.6	TimeTicks	read-only	The time remaining before (,G) Join state for this interface expires. This timer is called the (,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time.
INT alaPimStarGIJoinPruneState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.4	INTEGER	read-only	The state resulting from (,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (,G) state machine in the PIM-SM specification.
T/F alaPimStarGILocalMembership	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.3	TruthValue	read-only	Whether the local router has (,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(,G,I) in the PIM-SM specification.
TIK alaPimStarGIPrunePendingTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.5	TimeTicks	read-only	The time remaining before the local router acts on a (,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running.
alaPimStarGITable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5		not-accessible	The (conceptual) table listing the interface-specific (*,G) state that PIM has.
TIK alaPimStarGIUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.2	TimeTicks	read-only	The time since this entry was created by the local router.
ALA alaPimStarGPimMode	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.4	AlaPimMode	read-only	Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group.
NUM alaPimStarGPimModeOrigin	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.7	AlaPimGroupMappingOriginType	read-only	The mechanism by which the PIM mode and RP for the group were learned.
IP alaPimStarGRPAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.6	InetAddress	read-only	The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the alaPimStarGRPAddressType.
IPt alaPimStarGRPAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.5	InetAddressType	read-only	The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown.
NUM alaPimStarGRPFIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.13	InterfaceIndexOrZero	read-only	The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown.
IP alaPimStarGRPFNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.15	InetAddress	read-only	The address of the RPF next hop towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification.
IPt alaPimStarGRPFNextHopType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.14	InetAddressType	read-only	The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown.
IP alaPimStarGRPFRouteAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.17	InetAddress	read-only	The IP address which when combined with the corresponding value of alaPimStarGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object. This address object is only significant up to alaPimStarGRPFRoutePrefixLength bits. The remainder of the address bits are zero.
U32 alaPimStarGRPFRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.20	Unsigned32	read-only	The routing metric of the route used to find the RPF interface towards the RP.
U32 alaPimStarGRPFRouteMetricPref	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.19	Unsigned32	read-only	The metric preference of the route used to find the RPF interface towards the RP.
ADR alaPimStarGRPFRoutePrefixLength	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.18	InetAddressPrefixLength	read-only	The prefix length which when combined with the corresponding value of alaPimStarGRPFRouteAddress identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the alaPimStarGRPFNextHopType object.
IAN alaPimStarGRPFRouteProtocol	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.16	IANAipRouteProtocol	read-only	The routing mechanism via which the route used to find the RPF interface towards the RP was learned.
T/F alaPimStarGRPIsLocal	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.8	TruthValue	read-only	Whether the local router is the RP for the group.
alaPimStarGTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4		not-accessible	The (conceptual) table listing the non-interface specific (*,G) state that PIM has.
INT alaPimStarGUpstreamJoinState	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.9	INTEGER	read-only	Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification.
TIK alaPimStarGUpstreamJoinTimer	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.10	TimeTicks	read-only	The time remaining before the local router next sends a periodic (,G) Join message on alaPimStarGRPFIfIndex. This timer is called the (,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running.
IP alaPimStarGUpstreamNeighbor	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.12	InetAddress	read-only	The primary address of the neighbor on alaPimStarGRPFIfIndex that the local router is sending periodic (,G) Join messages to. The InetAddressType is given by the alaPimStarGUpstreamNeighborType object. This address is called RPF'(,G) in the PIM-SM specification.
IPt alaPimStarGUpstreamNeighborType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.11	InetAddressType	read-only	The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor.
TIK alaPimStarGUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.3	TimeTicks	read-only	The time since this entry was created by the local router.
IPt alaPimStaticRPAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.1	InetAddressType	not-accessible	The address type of this entry.
alaPimStaticRPEntry	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1		not-accessible	An entry (conceptual row) in the alaPimStaticRPTable. This entry is preserved on agent restart.
IP alaPimStaticRPGrpAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.2	InetAddress	not-accessible	The multicast group address which, when combined with alaPimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the alaPimStaticRPAddressType object. This address object is only significant up to alaPimSGRPFRoutePrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry.
ADR alaPimStaticRPGrpPrefixLength	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.3	InetAddressPrefixLength	not-accessible	The multicast group prefix length, which, when combined with alaPimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the alaPimStaticRPAddressType object. If alaPimStaticRPAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If alaPimStaticRPGrpAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128.
T/F alaPimStaticRPOverrideDynamic	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.6	TruthValue	read-create	Whether this static RP configuration overrides RP information learned dynamically for groups in this group prefix.
ALA alaPimStaticRPPimMode	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.5	AlaPimMode	read-create	The PIM mode to be used for groups in this group prefix. If this object is set to ssm(2) or dm(5), then alaPimStaticRPRPAddress must be set to zero. No RP operations are ever possible for PIM Mode SSM or DM.
U32 alaPimStaticRPPrecedence	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.7	Unsigned32	read-create	The value for alaPimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this static configuration. If alaPimStaticRPOverrideDynamic is set to TRUE, all dynamic RP configuration is overridden by this static configuration, whatever the value of this object. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers. A setting of this object may have different effects when applied to other routers. Do not use this object unless fine control of static RP behavior on the local router is required. A value of 65535 is used to represent an 'undefined' value indicating that this object is not being used.
alaPimStaticRPPrecedenceGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.10			A collection of objects to allow fine control of interactions between static RP configuration and dynamically acquired group to RP mappings.
ROW alaPimStaticRPRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.8	RowStatus	read-create	The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before valid values have been written to alaPimStaticRPRPAddress. All writeable objects in this entry can be modified when the status of this entry is active(1).
IP alaPimStaticRPRPAddress	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.4	InetAddress	read-create	The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the alaPimStaticRPAddressType object.
STO alaPimStaticRPStorageType	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.9	StorageType	read-create	The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
alaPimStaticRPTable	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11		not-accessible	This table is used to create and manage static configuration of RPs. If the group prefixes configured for two or more rows in this table overlap, the row with the greatest value of alaPimStaticRPGrpPrefixLength is used for the overlapping range.
alaPimStdMIB	1.3.6.1.4.1.6486.801.1.2.1.10.6.2			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of PIM routers. This MIB is based on the Internet Draft developed by the IETF PIM Working Group. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alaPimTopologyGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.1			A collection of read-only objects used to report local PIM topology.
alaPimTuningParametersGroup	1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2.3			A collection of writeable objects used to configure PIM behavior and to tune performance.

RFC description

Alcatel enterprise MIB for Protocol Independent Multicast (PIM) router configuration based on IETF standards.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-PIM-STD-MIB