ALCATEL-IND1-VLAN-MGR-MIB

All MIBs › ALCATEL-IND1-VLAN-MGR-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: VLAN and Bridging, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch VLAN manager MIB for creating, deleting, and managing 802.1Q VLANs and port memberships.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-VLAN-MGR-MIB?

ALCATEL-IND1-VLAN-MGR-MIB is an Alcatel-Lucent (Birds Of Prey product line, built on ALCATEL-IND1-BASE) proprietary MIB distributing VLAN configuration information, including the VLAN-to-port association. Its VLAN table, keyed by number, records description, admin/operational status, STP status, authentication/voice status, IP address/mask/encapsulation/forwarding, IPX network number/encapsulation/RIP-SAP mode/delay ticks, mobile-tag-port status, port-MAC status, local proxy ARP, MTU, and 1x1-STP status. As a configuration/status MIB it lets an administrator confirm VLAN IP/IPX addressing and STP mode on an Alcatel-Lucent switch. It is deployed on Alcatel-Lucent (Birds Of Prey) switching equipment. Engineers can download the ALCATEL-IND1-VLAN-MGR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-VLAN-MGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent (Birds Of Prey) switching equipment

Monitoring Examples

An administrator checks vlanIpAddress and vlanStpStatus to confirm VLAN IP addressing and spanning-tree mode on an Alcatel-Lucent switch.

What Can Be Monitored

VLAN IP/IPX addressing and spanning-tree configuration

Imported Objects

From ALCATEL-IND1-BASE

softentIND1VlanMgt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using vlanSetVlanCount OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vlanSetVlanCount into the Find box to locate it in the OID tree, then select it and click OK. It reports the count of existing VLANs on switch. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1VLANMgrMIB	1.3.6.1.4.1.6486.801.1.2.1.3.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Vlan Manager for the distribution of vlan configuration information, including the association between vlans and ports. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1VLANMgrMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.3.1.1			Branch For VLAN Manager Subsystem Managed Objects.
vlanMgrVlan	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1
vlanTable	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1		not-accessible	A list of Virtual LAN instances in this device.
vlanEntry	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1		not-accessible	A VLAN entry.
INT vlanNumber	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.1	INTEGER	read-write	The VLAN number identifying this instance. Valid range from 1 to 4094.
STR vlanDescription	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.2	DisplayString	read-write	Textual description of the VLAN instance.
INT vlanAdmStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.3	INTEGER	read-write	The administrative status which can be set by configuration. Disable(1) will disable ALL vports that are connected to this VLAN, enable(2) will enable ALL ports on this VLAN, delete(3) will detach and delete the ports/routers AND remove the VLAN.
INT vlanOperStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.4	INTEGER	read-only	Provide operating status of a particular VLAN environment.
ROW vlanStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.5	RowStatus	read-write	Row status to control creation/deletion of vlans.
INT vlanStpStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.6	INTEGER	read-write	Indicates status of spanning tree for the current VLAN.
INT vlanAuthentStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.7	INTEGER	read-write	Indicates status of authentication for the current VLAN.
INT vlanVoiceStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.8	INTEGER	read-write	Indicates status of voice usage for the current VLAN.
IP vlanIpAddress	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.9	IpAddress	read-write	IP address of the VLAN's virtual router port. Note: a vlan does not necessarily have an ip address. Setting one requires that the ip address be set, and optionally the following since they have defaults: ip mask, ip encap, ip forward. Then setting vlanIpStatus to add will create the ip router port for the given vlan (the index).
IP vlanIpMask	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.10	IpAddress	read-write	Subnetwork mask for VLAN IP Address. Default is class level mask for the ip address.
INT vlanIpEncap	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.11	INTEGER	read-write	VLAN's IP router port encapsulation. Not applicable when there is no ip router port.
INT vlanIpForward	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.12	INTEGER	read-write	VLAN's IP router port ip frame forwarding (disabled = ip host only). Not applicable when there is no ip router port.
INT vlanIpStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.13	INTEGER	read-write	Provides ability to add and remove the VLAN ip address.
ADR vlanIpxNet	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.14	IpxNetworkAddress	read-write	IPX network address. Note: a vlan does not necessarily have an ipx net number. Setting one requires that the ipx net be set, and optionally the ipx encap, ipx rip-sap mode, and delay ticks (all have defaults). Then the vlanIpxStatus should be set to add to create the ipx router port.
INT vlanIpxEncap	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.15	INTEGER	read-write	IPX of frame enapsulation of IPX VLAN router port. Not applicable when there is no ipx router port.
INT vlanIpxRipSapMode	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.16	INTEGER	read-write	IPX advertisement mode. Not applicable when there is no ipx router port.
INT vlanIpxDelayTicks	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.17	INTEGER	read-write	Tick metric to use for supporting IPX routing decisions.
INT vlanIpxStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.18	INTEGER	read-write	Provides ability to add and remove the VLAN ipx network node.
INT vlanTagMobilePortStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.19	INTEGER	read-write	When enabled for a VLAN, a mobile port will be moved to the VLAN based on the tag.
INT vlanPortMacStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.20	INTEGER	read-only	When enabled for a VLAN, it will be considered a special VLAN not affected by the ordinary vlan commands except the command to delete a VLAN
INT vlanLocalProxyArp	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.21	INTEGER	read-write	When enabled for a VLAN, local proxy ARP processing happens on this= VLAN.
INT vlanMtu	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.22	INTEGER	read-write	Maximum transmission unit i.e. the maximum size of packet that this vlan can handle. It ranges from 1280 to 9198.
INT vlan1x1StpStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.23	INTEGER	read-write	Indicates status of 1x1 spanning tree for the current VLAN.
INT vlanflatStpStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.24	INTEGER	read-write	Indicates status of flat spanning tree for the current VLAN.
INT vlanHABandwidth	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.25	INTEGER	read-write	Bandwidth of flood queue allocated by Q-driver for High Availability vlans. The value ranges from 1 to 50 Mega bits per second.
INT vlanSvlanTrafficType	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.26	INTEGER	read-write	The created SVLAN is desired for carrying customer or provider traffic, default is customer. When creating standard Vlans the value should be notApplicable
INT vlanSvlanPriority	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.27	INTEGER	read-write	All traffic getting mapped to this Svlan should be either priority mapped or mapped to a specific priority 0-7, default is priority 0. For standard Vlans the value should be -1
INT vlanMacLearningControlStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.28	INTEGER	read-write	Status of Mac Learning on a vlan
vlanMgrVpa	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2
vpaTable	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1		not-accessible	A list of Virtual LAN instances in this device.
vpaEntry	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1		not-accessible	A VLAN-Port Association (VPA) entry.
INT vpaVlanNumber	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.1	INTEGER	read-write	The VLAN number component of this instance. Valid range from 1 to 4094.
U32 vpaIfIndex	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.2	Unsigned32	read-write	The ifIndex component of this instance.
INT vpaType	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.3	INTEGER	read-only	The type of this vpa. Two are statically configured: configured default VPA and qTagged VPA. The mirrored is an internal type set for mirrored ports and the rest are dynamic vlan's 1. cfgDefault - Default vlan VPA Type 2. qTagged - The qTagged vlan VPA Type 3. mobile - The vpa is dynamically created according to rules/policies. 4. mirrored - Set internally when the vpa created is on a mirrored port. 6. slvan - Service vlan vpa's which are created. 7. dynamic - Created by dynamic GVRP or MVRP Protocol.
INT vpaState	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.4	INTEGER	read-only	The state of this vpa: 1. inactive - link down 2. blocking - link up, forwarding down 3. forwarding - link up, forwarding up, sources learned normally 4. filtering - link up, forwarding up, sources filtered.
ROW vpaStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.5	RowStatus	read-write	This is used to create or delete staticPrimary VPAs (default vlans on a port ). Creation replaces the existing staticPrimary VPA while deletion replaces the existing VPA so that the vlan number is 1 for the given port. Of course the corresponding vlan and port must exist.
INT vpaPortMacType	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.6	INTEGER	read-write	Value of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlans
vlanMgrVlanSet	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3
INT vlanSetVlanCountEx	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.1	INTEGER	read-only	Count of existing VLANs on switch.
INT vlanSetVlanRouterCount	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.2	INTEGER	read-only	Count of VLANs on switch with at least one router port configured.
INT vlanSetIpRouterCount	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.3	INTEGER	read-only	Count of VLANs on switch with IP router port configured.
INT vlanSetIpxRouterCount	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.4	INTEGER	read-only	Count of VLANs on switch with IPX router port configured.
INT vlanSetMultiRtrMacStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.5	INTEGER	read-write	Controls whether unique mac assigned to each vlan with router port (limit 64).
vlanMgrHAPort	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4
vlanHAPortTable	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1		not-accessible	A list of Port To HA vlan binding.
vlanHAPortEntry	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1		not-accessible	Port To HA vlan binding entry.
INT vlanHAPortVlanId	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.1	INTEGER	read-write	The vlan Id in which this port is a HA port
U32 vlanHAPortIfIndex	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.2	Unsigned32	read-write	This port is associated with a HA vlan.
INT vlanHAPortType	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.3	INTEGER	read-write	Value of this field will decide whether the port represented by vlanHAPortIfIndex is a ingress port or egress port.
ROW vlanHAPortRowStatus	1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.4	RowStatus	read-write	This indicate whether to add or delete the ifIndex
alcatelIND1VLANMgrMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.3.1.2			Branch For VLAN Manager Subsystem Conformance Information.
alcatelIND1VLANMgrMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.1			Branch For VLAN Manager Subsystem Units Of Conformance.
vlanMgrVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.1.1			Collection of objects for management of Vlan Manager VLANs.
vlanMgrVpaGroup	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.1.2			Collection of objects for management of Vlan Manager VPAs.
vlanMgrVlanSetGroup	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.1.3			Collection of objects for Vlan Manager global properties.
alcatelIND1VLANMgrMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.2			Branch For VLAN Manager Subsystem Compliance Statements.
alcatelIND1VLANMgrMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.3.1.2.2.1			Compliance statement for VLAN Manager.

RFC description

Alcatel-Lucent VLAN manager for distribution of VLAN configuration and port associations.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-VLAN-MGR-MIB