ALCATEL-IND1-PIM-STD-MIB :: alaPimInterfacePruneLimitInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-PIM-STD-MIBalaPimInterfacePruneLimitInterval

alaPimInterfacePruneLimitInterval

Module: ALCATEL-IND1-PIM-STD-MIB

OID (symbolic): ALCATEL-IND1-PIM-STD-MIB::alaPimInterfacePruneLimitInterval

OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.24

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM.

What is alaPimInterfacePruneLimitInterval?

Configures the minimum time that must pass between two successive Prune messages sent out on a PIM-DM interface. This throttles prune traffic to prevent flooding the network with rapid successive prune requests.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6486alcatelALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801alcatelIND1BaseMIBALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1alcatelIND1ManagementALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2managementIND1SoftwareALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1softwareIND1EntitiesALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10softentIND1RoutingALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10.6routingIND1PimALCATEL-IND1-BASE
Numeric OIDNameModule
1.3.6.1.4.1.6486.801.1.2.1.10.6.2alaPimStdMIBALCATEL-IND1-PIM-STD-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1alaPimALCATEL-IND1-PIM-STD-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1alaPimInterfaceTableALCATEL-IND1-PIM-STD-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1alaPimInterfaceEntryALCATEL-IND1-PIM-STD-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.24alaPimInterfacePruneLimitIntervalALCATEL-IND1-PIM-STD-MIB