ALCATEL-IND1-RDP-MIB

All MIBs › ALCATEL-IND1-RDP-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch Router Discovery Protocol MIB for managing IRDP router advertisement intervals and preferences.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-RDP-MIB?

ALCATEL-IND1-RDP-MIB is Alcatel's (OmniSwitch IND1 platform) proprietary MIB for configuring ICMP Router Discovery Protocol (IRDP) behavior on switch/router interfaces, letting hosts on a LAN discover default gateways via router advertisements. It exposes a global RDP status flag and a per-interface table covering the advertised interface address, enable/row status, minimum advertisement interval, advertised lifetime, and preference level, along with a VRRP-related status object. Its monitoring focus is configuration/operational status of the router-discovery service on each interface - whether RDP is enabled, how frequently and how long advertisements are valid, and the router's preference - rather than hardware sensors. It builds on the standard IRDP concept (RFC 1256) though implemented as an Alcatel enterprise-specific MIB, and its VRRP status object suggests some interaction with the switch's VRRP implementation. It is typically deployed on Alcatel OmniSwitch chassis, where ALCATEL-IND1-RDP-MIB SNMP monitoring helps confirm IRDP is correctly configured so end hosts can discover default gateways automatically.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-RDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel OmniSwitch (IND1 platform) switch/router

Monitoring Examples

An operator would check alaRDPStatus for the global enable state, then walk alaRDPIfTable/alaRDPIfEntry via alaRDPIfAddr to see per-interface alaRDPIfStatus, alaRDPIfMinAdvtInterval, alaRDPIfAdvLifeTime, and alaRDPIfPrefLevel. If alaRDPIfStatus shows RDP enabled but alaRDPVrrpStatus indicates the VRRP master role isn't held, hosts might be receiving advertisements from the wrong device as the preferred gateway. This lets operators confirm router-discovery advertisements are correctly scoped and prioritized across redundant gateways.

What Can Be Monitored

RDP global enable status
per-interface RDP status
advertisement interval
advertised lifetime
router preference level
VRRP interaction status

Imported Objects

From ALCATEL-IND1-BASE

routingIND1RDP

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1RouterDiscoveryProtocolMIB	1.3.6.1.4.1.6486.801.1.2.1.10.11.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of Router Discovery Protocol global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, o r consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2003 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1RDPMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1
alaRDPConfig	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1
INT alaRDPStatus	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.1	INTEGER	read-write	Controls the status of Routing Discovery Protocol
alaRDPIfTable	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20		not-accessible	The table of addressing information relevant to this entity's IP addresses.
alaRDPIfEntry	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1		not-accessible	The addressing information for one of this entity's IP addresses.
IP alaRDPIfAddr	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.1	IpAddress	read-only	Interface IP Address of this Router.
INT alaRDPIfStatus	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.2	INTEGER	read-only	Indicates the status of the RDP interface
IP alaRDPIfAdvtAddress	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.3	IpAddress	read-write	Default advertisement Address is 224.0.0.1
U32 alaRDPIfMaxAdvtInterval	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.4	Unsigned32	read-write	Maximum advertisement interval is in seconds
U32 alaRDPIfMinAdvtInterval	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.5	Unsigned32	read-write	Minimum advertisement interval in seconds: 0.75 * alaRDPIfMaxAdvtInterval
U32 alaRDPIfAdvLifeTime	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.6	Unsigned32	read-write	Advertisement Lifetime in seconds: 3 * alaRDPIfMaxAdvtInterval
I32 alaRDPIfPrefLevel	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.7	Integer32	read-write	Preference level for each IP address advertised on the interface: 0
ROW alaRDPIfRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.8	RowStatus	read-write	The status of this table entry.
STR alaRDPIfName	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.9	DisplayString	read-only	The user defined name used to identify the IP interface
INT alaRDPIPIfStatus	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.10	INTEGER	read-only	Indicates the status of the IP interface
INT alaRDPVrrpStatus	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.11	INTEGER	read-only	Indicates the status of the VRRP interface
alcatelIND1RDPMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2
alcatelIND1RDPMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.1
alcatelIND1RDPMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.1.1			The compliance statement for router discovery protocol task and implementing the ALCATEL-IND1-RDP MIB.
alcatelIND1RDPMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.2
alaRDPConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.2.1			A collection of objects to support management of RDP.

RFC description

Router Discovery Protocol global configuration management for devices.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-RDP-MIB

What Is ALCATEL-IND1-RDP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description