All MIBs › ALCATEL-IND1-PIM-STD-MIB › alaPimInvalidRegisterMsgsRcvd
alaPimInvalidRegisterMsgsRcvd
Module: ALCATEL-IND1-PIM-STD-MIB
OID (symbolic): ALCATEL-IND1-PIM-STD-MIB::alaPimInvalidRegisterMsgsRcvd
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of invalid PIM Register messages that have been received by this device.
A PIM Register message is invalid if either
o the destination address of the Register message does not match the Group to RP mapping on this device, or
o this device believes the group address to be within an SSM address range, but this Register implies ASM usage.
These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified by the object alaPimGroupMappingPimMode. If there is no such mapping, then the object alaPimGroupMappingPimMode is absent. The RP address contained in the invalid Register is alaPimInvalidRegisterRp.
Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to alaPimInvalidRegisterOrigin, and is addressed to alaPimInvalidRegisterGroup.
Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted.
What is alaPimInvalidRegisterMsgsRcvd?
Reports the total number of invalid PIM Register messages received by this device, where invalid means the destination address does not match the device's Group-to-RP mapping or another consistency check failed. This counter aids in diagnosing multicast routing misconfigurations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32 snmpwalk -v2c -c public <target> ALCATEL-IND1-PIM-STD-MIB::alaPimInvalidRegisterMsgsRcvd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32.1 snmpget -v2c -c public <target> ALCATEL-IND1-PIM-STD-MIB::alaPimInvalidRegisterMsgsRcvd.1
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-PIM-STD-MIB::alaPimInvalidRegisterMsgsRcvd OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.10 | softentIND1Routing | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6 | routingIND1Pim | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.2 | alaPimStdMIB | ALCATEL-IND1-PIM-STD-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1 | alaPim | ALCATEL-IND1-PIM-STD-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32 | alaPimInvalidRegisterMsgsRcvd | ALCATEL-IND1-PIM-STD-MIB |