ADIC-MANAGEMENT-MIB

All MIBs › ADIC-MANAGEMENT-MIB

Category: Fibre Channel and Storage

Description: Manages ADIC tape library systems including robot arm status, drive inventory, slot utilization, and media management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADIC-MANAGEMENT-MIB?

ADIC-MANAGEMENT-MIB is a vendor-specific MIB from Advanced Digital Information Corporation (ADIC) that models the Management Control Blade (MCB) of ADIC enterprise tape library systems, covering everything from chassis networking to robotics and drive health. It exposes globalStatusTable (role, operational status, NTP/time-server configuration), systemManagerTable and softwareInstallationTable (firmware/component install state and versions for the MCB, CMB, RCU, FCB, and AMC), and persistentDataTable, alongside physicalLibrary/logicalLibrary subtrees that track robot arm, drive, slot, and media-domain state and a ras (RAS) subtree of ticket, report, and FRU status tables with AdicStatusGroupState severities. This makes it a broad operational-health and configuration MIB for the library's control plane, useful for confirming firmware install success, tracking open RAS tickets, and correlating trap-driven events (e.g. drive firmware update, physical library configuration change) with library subsystem state. It depends on ADIC-INTELLIGENT-STORAGE-MIB for shared type assignments (AdicEnable, AdicComponentType, RowStatus, etc.) and is deployed on ADIC tape library controllers in enterprise backup environments. Administrators can download the ADIC-MANAGEMENT-MIB file to load it into their MIB browser and monitor library health end to end.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADIC-MANAGEMENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADIC tape library systems (Scalar-series enterprise tape libraries with MCB/CMB/RCU controllers)

Monitoring Examples

An operator polls softwareInstallationTable's installProcessStatus and currentFirmwareVersion objects after a firmware push to a drive brick, and checks the ras subtree's FRU status table for any AdicStatusGroupState of failed or degraded; a stuck installProcessStatus alongside a degraded robotics status group would indicate a failed firmware update affecting the robot arm subsystem.

What Can Be Monitored

robot arm and drive inventory status
slot/media-domain utilization
firmware/software installation status
RAS ticket and FRU status severity
global system/network configuration state

Imported Objects

From ADIC-INTELLIGENT-STORAGE-MIB

AdicAgentStatus
AdicComponentType
AdicDateAndTime
AdicDoorStatus
AdicEnable
AdicInterfaceType
AdicMibVersion
AdicOnlineStatus
AdicREDIdentifier
RowStatus
componentId	OBJECT-TYPE
hardware	OBJECT-IDENTITY
trapIntendedUsage	OBJECT-TYPE
trapSequenceNumber	OBJECT-TYPE
trapSeverity	OBJECT-TYPE
trapSummaryText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Gauge
IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ADI actualSpeed	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.7	AdicEthernetSpeed	read-only	The actual (negotiated) speed for this Ethernet port.
ADI amcInstallProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.18	AdicInstallStatus	read-only
STR amcInstallStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.13	DisplayString	read-only	Provides detailed information about the AMC component install Example: download status (inprogress, complete, failed, not being upgraded) : current component : time to complete AMC
INT assignedLun	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.4	INTEGER	read-only	Assigned LUN of this library's (virtual) SCSI media changer. This can only be changed through the SANMgr proxy MIB device map table.
ADI autoCalibrateMode	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.8	AdicEnable	read-write
ADI autoConfigureMode	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.9	AdicEnable	read-write
ADI autoInventoryMode	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.7	AdicEnable	read-write
ADI automaticCleaning	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.13	AdicEnable	read-write	Enables/Disables automatic cleaning for drives this logical library.
INT autoPartitionCommand	1.3.6.1.4.1.3764.1.1.200.20.90.12.1.2	INTEGER	read-write	Perform operation based on the media domain, media type, and interface type: autoPartition(1) - create the number of partitions indicated by the numAutoPartition object, with the library resouces divided equally among the partitions.
autoPartitionEntry	1.3.6.1.4.1.3764.1.1.200.20.90.12.1		not-accessible	Autopartitioning is based on the media domain, media type, and drive data port interface type.
autoPartitionTable	1.3.6.1.4.1.3764.1.1.200.20.90.12		not-accessible	Variables pertaining to library auto partitioning.
INT capacity	1.3.6.1.4.1.3764.1.1.200.20.30.10.1.1	INTEGER	read-only	The number of kilobytes of file space on this MCB.
ADI cmbInstallProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.15	AdicInstallStatus	read-only
STR cmbInstallStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.10	DisplayString	read-only	Provides detailed information about the CMB component install Example: download status (inprogress, complete, failed, not being upgraded) : current CMB : time to complete CMB/s
INT command	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.2	INTEGER	read-write
INT componentsInBundle	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.8	INTEGER	read-only	Identifies the components being installed with this bundle ********************************************************** (LSB) bit 0 - MCB bit 1 - CMB bit 2 - RCU bit 3 - FCB bit 4 - AMC
NTF connectivityGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.400			The overall state of the connectivity system status group has changed. The present state of the connectivity status group is given by the value of the rasStatusGroupStatus object in the trap payload.
NTF controlGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.401			The overall state of the control system status group has changed. The present state of the control status group is given by the value of the rasStatusGroupStatus object in the trap payload.
NTF coolingGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.402			The overall state of the cooling system status group has changed. The present state of the cooling status group is given by the value of the rasStatusGroupStatus object in the trap payload.
STR currentFirmwareVersion	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.5	DisplayString	read-only	Firmware revision currently on the i2000.
ADI dhcpStatus	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.3	AdicEnable	read-write	State of DHCP support.
STR downloadedFirmwareVersion	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.7	DisplayString	read-only	Identifier for a the bundle that was previously downloaded to the i2000 but not installed.
NTF driveActivityUpdate	1.3.6.1.4.1.3764.1.1.200.20.0.112			Drive activity integrated over a fixed time period. Currently, the time period is one hour. NOTE: the drive is identified by the instance OID contained in the phHourlyMBytesRead, phHourlyMBytesWritten, and phHourlyWritten varbinds.
NTF driveBrickFwUpdateFailure	1.3.6.1.4.1.3764.1.1.200.20.0.114			Attempt to update drive brick's firmware has failed. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) trapSummaryText - brief message about the update phDriveSerialNumber - the drive serial number. The OID of the varbind encoded in the trap payload must be the full OID, column OID plus indices. phDriveFirmwareVersion - the drive firmware version identifier. The OID of the varbind encoded in the trap payload must be the full OID, column OID plus indices.
NTF driveBrickFwUpdateStart	1.3.6.1.4.1.3764.1.1.200.20.0.117			Drive brick firmware update has started. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) trapSummaryText - brief message about the update phDriveSerialNumber - the drive serial number. The OID of the varbind encoded in the trap payload must be the full OID, column OID plus indices.
NTF driveBrickFwUpdateSuccess	1.3.6.1.4.1.3764.1.1.200.20.0.113			Drive brick's firmware was successfully updated. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) trapSummaryText - brief message about the update phDriveSerialNumber - the drive serial number. The OID of the varbind encoded in the trap payload must be the full OID, column OID plus indices. phDriveFirmwareVersion - the drive firmware version identifier. The OID of the varbind encoded in the trap payload must be the full OID, column OID plus indices.
NTF drivesAndMediaGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.403			The overall state of the drives and media system status group has changed. The present state of the drives and media status group is given by the value of the rasStatusGroupStatus object in the trap payload.
ADI enableDaylightSavingsTime	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.8	AdicEnable	read-write	Enable automatic adjustment of the system date and time for daylight savings time.
INT ethernetDuplex	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.8	INTEGER	read-write	The duplex setting for this Ethernet port.
eventManager	1.3.6.1.4.1.3764.1.1.200.20.70
ADI fcbInstallProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.17	AdicInstallStatus	read-only
STR fcbInstallStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.12	DisplayString	read-only	Provides detailed information about the FCB component install Example: download status (inprogress, complete, failed, not being upgraded) : current fcb : time to complete FCB/s
fcDrivePortEntry	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1		not-accessible	A row object describing a Fibre Channel port.
fcDrivePortTable	1.3.6.1.4.1.3764.1.1.200.20.80.116.10		not-accessible	This table contains objects pertaining to Fibre Channel port settings on native Fibre Channel drives.
ADI fcPortNegotiatedSpeed	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1.2	AdicFcPortSpeed	read-only	Actual transmitter speed as negotiated on the FC network. The numerical value of this object is equal to the port speed in megabits per second. Although auto(1) is defined in the AdicFcPortSpeed enumeration, the fcPortNegotiatedSpeed should never return this value. ******************************************* auto(1) - This object should never auto(1) megabits1000(1000) - 1000 megabits per second megabits2000(2000) - 2000 megabits per second
ADI fcPortNegotiatedType	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1.4	AdicFcPortType	read-only	Actual port type as negotiated on the FC network. Should never return auto(1).
ADI fcPortPreferredSpeed	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1.1	AdicFcPortSpeed	read-write	Preferred transmitter speed. Except for auto(1), the numerical value of this object is equal to the port speed in megabits per second. ******************************************* auto(1) - speed is auto-negotiated with no preferred speed megabits1000(1000) - 1000 megabits per second megabits2000(2000) - 2000 megabits per second
ADI fcPortPreferredType	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1.3	AdicFcPortType	read-write	Preferred port type, such as N_Port or NL_Port. auto(1) means no preference, auto-negotiate.
INT fcPortTypeQualifier	1.3.6.1.4.1.3764.1.1.200.20.80.116.10.1.5	INTEGER	read-only	Is this a public or private port?
STR featureName	1.3.6.1.4.1.3764.1.1.200.20.50.20.1.2	DisplayString	read-only	Name of the ADIC licensed feature enable by this row's license key. The key is specified by the value of licenseKeyIndex.
INT freeSpace	1.3.6.1.4.1.3764.1.1.200.20.30.10.1.2	INTEGER	read-only	The number of kilobytes of availble (unused) file space on this MCB.
globalEthernetEntry	1.3.6.1.4.1.3764.1.1.200.20.15.10.1		not-accessible
globalEthernetManager	1.3.6.1.4.1.3764.1.1.200.20.15
globalEthernetTable	1.3.6.1.4.1.3764.1.1.200.20.15.10		not-accessible	Some Ethernet settings/switches. Routing tables are part of MIB-II, so we don't include them here.
globalStatus	1.3.6.1.4.1.3764.1.1.200.20.10
globalStatusEntry	1.3.6.1.4.1.3764.1.1.200.20.10.10.1		not-accessible
globalStatusTable	1.3.6.1.4.1.3764.1.1.200.20.10.10		not-accessible
IP hostIpAddress	1.3.6.1.4.1.3764.1.1.200.20.70.10.1.1	IpAddress	read-write	Host IP address to which SNMP traps will be sent/forwarded.
NTF ieStationDoorStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.103
NTF ieStationInventoryPerformed	1.3.6.1.4.1.3764.1.1.200.20.0.109			An inventory operation has been performed on an I/E station.
INT installCommand	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.3	INTEGER	read-write	download - copy firmware bundle to MCB but do not install install - commence installation (could be current bundle or previously downloaded bundle) abort - abort installation in progress rollback - rollback to the previous version of the system identified by the value in the previousFirmwareVersion field. timeEstimate - provides a estimate on the overall download time for a previously downloaded bundle
STR installPackageName	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.1	DisplayString	read-write	Filename and path of the package to be installed. The management application writes the filename here, which initiates the update process.
INT installProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.2	INTEGER	read-only	ok - installation successful - this is the intial state inProgress - software package in being installed failed - software package installation failed. The status should return failed until another write to installPackageFilename. updateAborted - software installation was cancel and system reverts back to previous version
STR installStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.4	DisplayString	read-only	Indicates time to complete the entire installation: example: Estimated time to complete download xx minutes
IP ipAddress	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.2	IpAddress	read-write	IP Address of this MCB's external Ethernet port.
IP ipAddressSubnetMask	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.4	IpAddress	read-write	Read-Write version of MIB-II ipAdEntNetMask Object. Description clause from MIB-II text The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
STR key	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.3	DisplayString	read-write	The license key string.
licensableFeatureEntry	1.3.6.1.4.1.3764.1.1.200.20.50.30.1		not-accessible
STR licensableFeatureName	1.3.6.1.4.1.3764.1.1.200.20.50.30.1.1	DisplayString	read-only	Name of the ADIC licensable feature to be displayed to the user.
licensableFeatureTable	1.3.6.1.4.1.3764.1.1.200.20.50.30		not-accessible	This table is a list of all licensable features. It defines the mapping between a feature name and its licenseFeatureIndex.
licenseFeatureEntry	1.3.6.1.4.1.3764.1.1.200.20.50.20.1		not-accessible
INT licenseFeatureIndex	1.3.6.1.4.1.3764.1.1.200.20.50.20.1.1	INTEGER	read-only	Feature index for this table, as well as licensable feature table. If a feature is not licensed, the row corresponding to that feature does not appear here, but it does appear in the licensableFeatureTable, as do all licensableFeatures.
INT licenseFeatureQuantity	1.3.6.1.4.1.3764.1.1.200.20.50.20.1.3	INTEGER	read-only	The quantity of this licensed feature enabled by this license key, if applicable. For example, a license key which enables 1000 slots of Capacity-on-Demand storage would have quantity = 1000. For features which are not licensed by quantity, return 0.
licenseFeatureTable	1.3.6.1.4.1.3764.1.1.200.20.50.20		not-accessible	This table is a list of all features activated by a particular license key.
ADI licenseKeyAppliedDate	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.6	AdicDateAndTime	read-only	Date and time when the license key was applied. This field indicates the chronological order in which the keys were applied. If multiple keys enable the same feature, the most recent key supercedes older keys.
INT licenseKeyDuration	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.4	INTEGER	read-only	Is this license key permanent or transient? Permanent keys have no expiration date, transient keys expire at the time found in the licenseKeyExpirationDate object.
licenseKeyEntry	1.3.6.1.4.1.3764.1.1.200.20.50.10.1		not-accessible
ADI licenseKeyExpirationDate	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.5	AdicDateAndTime	read-only	Exact date and time when this license key expires. Has no meaning if license key is permanent.
INT licenseKeyIndex	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.1	INTEGER	read-only	Ordinal inde for this table. Identifies a license key database entry. Each key may enable multiple features. A list of features enabled by each key can be found in the licenseFeatureTable.
ROW licenseKeyRowStatus	1.3.6.1.4.1.3764.1.1.200.20.50.10.1.2	RowStatus	read-write	Controls creation/deletion of rows in the license key database.
licenseKeyTable	1.3.6.1.4.1.3764.1.1.200.20.50.10		not-accessible
licensing	1.3.6.1.4.1.3764.1.1.200.20.50
loDriveEntry	1.3.6.1.4.1.3764.1.1.200.20.90.80.1		not-accessible
INT loDriveRow	1.3.6.1.4.1.3764.1.1.200.20.90.80.1.1	INTEGER	read-only	Row coordinate value for where this drive element is physically located.
loDriveSegEntry	1.3.6.1.4.1.3764.1.1.200.20.90.50.1		not-accessible
NUM loDriveSegInterfaceType	1.3.6.1.4.1.3764.1.1.200.20.90.50.1.4	AdicInterfaceType	read-only	Data interface for this segment.
INT loDriveSegMediaType	1.3.6.1.4.1.3764.1.1.200.20.90.50.1.3	INTEGER	read-only	Exact media type of this segment. With loSegmentMediaDomain, points a row in the media type table.
INT loDriveSegSize	1.3.6.1.4.1.3764.1.1.200.20.90.50.1.1	INTEGER	read-only	Number of elements in this segment.
INT loDriveSegStartingAddress	1.3.6.1.4.1.3764.1.1.200.20.90.50.1.2	INTEGER	read-only	Logical SCSI element address of the first element (row) in this drive segment. Element addresses are contiguous within a segment and unique within a logical library.
loDriveSegTable	1.3.6.1.4.1.3764.1.1.200.20.90.50		not-accessible	This is a list of all the drive segments in the library, indexed by their media domain, media type and segment index.
loDriveTable	1.3.6.1.4.1.3764.1.1.200.20.90.80		not-accessible
loGeneralInfoEntry	1.3.6.1.4.1.3764.1.1.200.20.90.10.1		not-accessible
loGeneralInfoTable	1.3.6.1.4.1.3764.1.1.200.20.90.10		not-accessible	General information about the Logical Library Manager.
logEntry	1.3.6.1.4.1.3764.1.1.200.20.70.20.1		not-accessible	This entry object is optional
logicalLibrary	1.3.6.1.4.1.3764.1.1.200.20.90
NTF logicalLibraryActivity	1.3.6.1.4.1.3764.1.1.200.20.0.200
NTF logicalLibraryCreated	1.3.6.1.4.1.3764.1.1.200.20.0.201
NTF logicalLibraryDeleted	1.3.6.1.4.1.3764.1.1.200.20.0.203
logicalLibraryEntry	1.3.6.1.4.1.3764.1.1.200.20.90.20.1		not-accessible
INT logicalLibraryIndex	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.1	INTEGER	read-only	Identifies the Logical Library to be managed.
NTF logicalLibraryModified	1.3.6.1.4.1.3764.1.1.200.20.0.202
NTF logicalLibraryOnlineStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.204
logicalLibraryTable	1.3.6.1.4.1.3764.1.1.200.20.90.20		not-accessible
ADI logicalSNAdressingMode	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.21	AdicEnable	read-write	Enables/disables the logical serial number addressing feature.
STR logName	1.3.6.1.4.1.3764.1.1.200.20.70.20.1.1	DisplayString	read-only	This object is optional. Name of the log to be accessed.
NTF logRetrievalComplete	1.3.6.1.4.1.3764.1.1.200.20.0.500			Indicates that the system has retrieved all remote log files as part of the capture snapshot procedure.
INT logSnapshotCommand	1.3.6.1.4.1.3764.1.1.200.20.70.30.1.1	INTEGER	read-write	This object is optional. Commands are: ********************** retrieveLogs - Gather snapshots of various system logs in preparation to build snapshot archive file.
logSnapshotEntry	1.3.6.1.4.1.3764.1.1.200.20.70.30.1		not-accessible	This entry object is optional.
logSnapshotTable	1.3.6.1.4.1.3764.1.1.200.20.70.30		not-accessible	This table is optional. Management functionality for generating a snapshot archive containing all of the system logs
logTable	1.3.6.1.4.1.3764.1.1.200.20.70.20		not-accessible	This table is optional Management functionality for general event logging. Log entries are not necessarily available via SNMP.
INT loIeRow	1.3.6.1.4.1.3764.1.1.200.20.90.70.1.1	INTEGER	read-only	Row coordinate value for this storage slot.
loIeSegEntry	1.3.6.1.4.1.3764.1.1.200.20.90.40.1		not-accessible
INT loIeSegReserve	1.3.6.1.4.1.3764.1.1.200.20.90.40.1.2	INTEGER	read-write	Mechanism to release and reserve this I/E segment.
INT loIeSegReservedBy	1.3.6.1.4.1.3764.1.1.200.20.90.40.1.3	INTEGER	read-write	Index of logical library for which this I/E segment has been reserved.
INT loIeSegSize	1.3.6.1.4.1.3764.1.1.200.20.90.40.1.1	INTEGER	read-only	Number of I/E elements in this segment.
INT loIeSegStartingAddress	1.3.6.1.4.1.3764.1.1.200.20.90.40.1.4	INTEGER	read-only	Logical SCSI element address of the first element (row) in this I/E segment. Element addresses are contiguous within a segment and unique within a logical library.
loIeSegTable	1.3.6.1.4.1.3764.1.1.200.20.90.40		not-accessible	This is a list of all the I/E segments in the logical library, indexed by a flat segment index.
loIeSlotEntry	1.3.6.1.4.1.3764.1.1.200.20.90.70.1		not-accessible
loIeSlotTable	1.3.6.1.4.1.3764.1.1.200.20.90.70		not-accessible
NUM loInterfaceType	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.16	AdicInterfaceType	read-write	Type of data interface for this logical library.
INT loLtoTapeTags	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.18	INTEGER	read-write	Controls the inclusion of media type characters in the media barcodes for this logical library. For example, the LTO media type characters are 'L1' for LTO-1 and 'L2' for LTO-2. This object applies to logical libraries of all media domains, not just LTO (as the name suggests).
INT loMediaTypeCheckingPolicy	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19	INTEGER	read-write	Allows the user to specify special handling of media type information in barcodes. Values are: 0 - media type checking disabled; media type as derived from barcode is irrelevant. 911 - 'required'; barcode MUST be a valid ADIC barcode, the correct media type may be derived from the barcode using the ADIC algorithm. Other - 'override'; the media type may not be derived from the barcode, use this value instead. The value map is the same as the mediaTypeIndex variable: the logical library's mediaDomain variable specifies the media domain and loMediaTypeCheckingPolicy specifies the media type that will be assumed for all media in this logical library.
INT loNumLibraries	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.17	INTEGER	read-write	Formerly used in auto partition operation. Made obsolete by autoPartition table.
INT loNumRecoveredGets	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.1	INTEGER	read-only	This object is optional Number of recovered get operations for this logical library. The count is for the entire lifetime of the logical library.
INT loNumRecoveredPuts	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.2	INTEGER	read-only	This object is optional Number of recovered putt operations for this logical library. The count is for the entire lifetime of the logical library.
INT loNumRecoveredScans	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.3	INTEGER	read-only	This object is optional Number of recovered scan operations for this logical library. The count is for the entire lifetime of the logical library.
INT loSegmentAisle	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.1	INTEGER	read-only	Aisle coordinate value for this segment.
INT loSegmentAssignedTo	1.3.6.1.4.1.3764.1.1.200.20.90.27.1.1	INTEGER	read-only	logicalLibraryIndex to which this segment belongs.
INT loSegmentBelongsTo	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.10	INTEGER	read-write	logicalLibraryIndex to which this segment is allocated. This object has no meaning for an I/E segment since I/E segments may be shared. For I/E segments, the list of logical libaraies which share the segment may be found in the loSegmentAssignmentTable.
loSegmentBelongsToEntry	1.3.6.1.4.1.3764.1.1.200.20.90.27.1		not-accessible
loSegmentBelongsToTable	1.3.6.1.4.1.3764.1.1.200.20.90.27		not-accessible	This is a list of the logical libraries to which each segments belongs. Storage and drive segments belong to a maximum of one logical library, but I/E segments may be shared among several logical libraries.
INT loSegmentCol	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.5	INTEGER	read-only	Column coordinate value for this segment.
INT loSegmentCommand	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.11	INTEGER	read-write	Operation to perform using objects in varbind list.
loSegmentEntry	1.3.6.1.4.1.3764.1.1.200.20.90.25.1		not-accessible
INT loSegmentFrame	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.2	INTEGER	read-only	Frame coordinate value for this segment.
INT loSegmentMediaDomain	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.9	INTEGER	read-only	Media domain for this segment. Points to a row in the media domain table.
INT loSegmentRack	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.3	INTEGER	read-only	Rack coordinate value for this segment.
INT loSegmentSection	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.4	INTEGER	read-only	Section coordinate for this segment.
INT loSegmentSize	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.7	INTEGER	read-only	Number of elements in this segment.
INT loSegmentStartingAddress	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.13	INTEGER	read-only	Logical SCSI element address of the first element (row) in this segment. Element addresses are contiguous within a segment and unique within a logical library.
INT loSegmentStartingRow	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.6	INTEGER	read-only	Row coordinate of the first element in this segment. This is useful to divide a column into multiple segments. For instance, a segment which contains rows 1 - 10 would have loSegmentStartingRow = 1. A segment which contains rows 11 - 20 in the same column would have loSegmentStartingRow = 11.
INT loSegmentStatus	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.12	INTEGER	read-only	Is this segment allocated to a logical library?
loSegmentTable	1.3.6.1.4.1.3764.1.1.200.20.90.25		not-accessible	This is a list of all the segments in the library.
ADI loSegmentType	1.3.6.1.4.1.3764.1.1.200.20.90.25.1.8	AdicSegmentType	read-only	Type segment (storage, I/E, drive).
loStatisticsEntry	1.3.6.1.4.1.3764.1.1.200.20.90.90.1		not-accessible	This entry object is optional
loStatisticsTable	1.3.6.1.4.1.3764.1.1.200.20.90.90		not-accessible	This table is optional Table of statistics for each logical library. Error counts, recovery counts, etc. .
INT loStatsNumGetRetries	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.6	INTEGER	read-only	This object is optional Number of retried get operations performed for this logical library. The count is for the entire lifetime of the logical library.
INT loStatsNumPutRetries	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.5	INTEGER	read-only	This object is optional Number of retried put operations performed for this logical library. The count is for the entire lifetime of the logical library.
INT loStatsNumPuts	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.4	INTEGER	read-only	This object is optional Number of put operations performed for this logical library. The count is for the entire lifetime of the logical library.
INT loStatsNumScanRetries	1.3.6.1.4.1.3764.1.1.200.20.90.90.1.7	INTEGER	read-only	This object is optional Number of retried scan operations performed for this logical library. The count is for the entire lifetime of the logical library.
INT loStatus	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.12	INTEGER	read-write
INT loStorageRow	1.3.6.1.4.1.3764.1.1.200.20.90.60.1.1	INTEGER	read-only	Row coordinate value for this storage slot.
loStorageSegEntry	1.3.6.1.4.1.3764.1.1.200.20.90.30.1		not-accessible
INT loStorageSegSize	1.3.6.1.4.1.3764.1.1.200.20.90.30.1.1	INTEGER	read-only	Number of storage elements in this segment.
INT loStorageSegStartingAddress	1.3.6.1.4.1.3764.1.1.200.20.90.30.1.2	INTEGER	read-only	Logical SCSI element address of the first element (row) in this storage segment. Element addresses are contiguous within a segment and unique within a logical library.
loStorageSegTable	1.3.6.1.4.1.3764.1.1.200.20.90.30		not-accessible	This is a list of all the storage segments in the library, indexed by a flat segment index loStorageSegIndex.
loStorageSlotEntry	1.3.6.1.4.1.3764.1.1.200.20.90.60.1		not-accessible
loStorageSlotTable	1.3.6.1.4.1.3764.1.1.200.20.90.60		not-accessible
management	1.3.6.1.4.1.3764.1.1.200.20
ADI managementMibVersion	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.7	AdicMibVersion	read-only	Version of the ADIC-MANAGEMENT-MIB on which this agent is based.
INT masterOnlineStatus	1.3.6.1.4.1.3764.1.1.200.20.90.10.1.3	INTEGER	read-write
INT maxLogicalLibraries	1.3.6.1.4.1.3764.1.1.200.20.90.10.1.1	INTEGER	read-only	Maximum number of logical libraries. This includes all media types.
STR mcbHostName	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.1	DisplayString	read-write	Host name of this MCB.
ADI mcbInstallProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.14	AdicInstallStatus	read-only
STR mcbInstallStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.9	DisplayString	read-only	Provides detailed information about the MCB component install Example: download status (inprogress, complete, failed, not being upgraded) : current component : time to complete MCB
NTF mediaDismounted	1.3.6.1.4.1.3764.1.1.200.20.0.108			Media was dismounted in the tape drive indicated in the trap payload. This trap is issued upon every dismount operation. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) phDriveRow - row component of the drive's physical location in the library. phDriveMbytesRead - over lifetime of drive phDriveMbytesWritten - over lifetime of drive
INT mediaDomain	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.7	INTEGER	read-write	Points to entry in the Physical Library MediaDomainTable.
mediaDomainEntry	1.3.6.1.4.1.3764.1.1.200.20.80.20.1		not-accessible
INT mediaDomainIndex	1.3.6.1.4.1.3764.1.1.200.20.80.20.1.1	INTEGER	read-only
STR mediaDomainName	1.3.6.1.4.1.3764.1.1.200.20.80.20.1.2	DisplayString	read-only
mediaDomainTable	1.3.6.1.4.1.3764.1.1.200.20.80.20		not-accessible	Table of all media domains installed in the library.
NTF mediaMounted	1.3.6.1.4.1.3764.1.1.200.20.0.107			Media was mounted in the tape drive indicated in the trap payload. This trap is issued upon every mount operation. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) phDriveRow - row component of the drive's physical location in the library.
INT mediaType	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.8	INTEGER	read-write	Points to entry in the Physical Library MediaTypeTable.
ADI mediaTypeChecking	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.14	AdicEnable	read-write	Enables/Disables media type checking for this logical library.
mediaTypeEntry	1.3.6.1.4.1.3764.1.1.200.20.80.30.1		not-accessible
INT mediaTypeIndex	1.3.6.1.4.1.3764.1.1.200.20.80.30.1.1	INTEGER	read-only
STR mediaTypeName	1.3.6.1.4.1.3764.1.1.200.20.80.30.1.2	DisplayString	read-only
mediaTypeTable	1.3.6.1.4.1.3764.1.1.200.20.80.30		not-accessible	Table of media types.
NTF moveMediaComplete	1.3.6.1.4.1.3764.1.1.200.20.0.104			A piece of media has been move from one location to another. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) phStorageElementAddr - source element address phStorageElementAddr - destination element address
STR name	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.3	DisplayString	read-write
ADI networkTimeEnable	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.6	AdicEnable	read-write	Enable/disabled the use of a network time server.
INT networkTimeProtocol	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.5	INTEGER	read-write	Protocol to use when with network time server.
IP networkTimeServer1	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.4	IpAddress	read-write	IP address of the time server to be used.
IP networkTimeServer2	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.9	IpAddress	read-write	IP address of the second time server to be used. Multiple time servers may be used for redundancy and (or) improved time accuracy.
INT numAutoPartition	1.3.6.1.4.1.3764.1.1.200.20.90.12.1.1	INTEGER	read-write	Number of partitions to create upon automatic partitioning for a given media domain, media type and interface type.
INT numCleaningCartridges	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.13	INTEGER	read-only	Total number of cleaning cartridges present in the library
INT numCleaningSlots	1.3.6.1.4.1.3764.1.1.200.20.80.20.1.5	INTEGER	read-write	Returns the number of storage slots reserved for cleaning media of this domain. When set, the value is the total number of slots to reserve for cleaning media of this domain. The library will reserve a set of storage segments such that total number of storage slots is greater than or equal to numCleaningSlots.
INT numDriveElements	1.3.6.1.4.1.3764.1.1.200.20.80.30.1.3	INTEGER	read-only	Number of drives for this media type.
INT numDrives	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.11	INTEGER	read-write
INT numElementDomains	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.1	INTEGER	read-only	Number of element domains (such as DLT, LTO, 8mm, etc.) currently installed in this physical library.
INT numIE	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.10	INTEGER	read-write
INT numIeElements	1.3.6.1.4.1.3764.1.1.200.20.80.20.1.4	INTEGER	read-only	Total number of import/export elements for this media domain in this physical library.
INT numLogicalLibraries	1.3.6.1.4.1.3764.1.1.200.20.90.10.1.2	INTEGER	read-only	Current number of logical libraries configured. This includes all media types.
INT numPhAisles	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.10	INTEGER	read-only	Number of aisles in this library.
INT numPhDrives	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.4	INTEGER	read-only
INT numPhFrames	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.17	INTEGER	read-only	The number of physical frames in the library.
INT numPhIESlots	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.3	INTEGER	read-only
INT numPhSlots	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.2	INTEGER	read-only
INT numProductIds	1.3.6.1.4.1.3764.1.1.200.20.90.15.1.3	INTEGER	read-only
INT numSlots	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.9	INTEGER	read-write
INT numStorageCartridges	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.12	INTEGER	read-only	Total number of storage cartridges present in the library
INT numStorageElements	1.3.6.1.4.1.3764.1.1.200.20.80.20.1.3	INTEGER	read-only	Total number of storage elements for this media domain in this physical library.
INT numVendorIds	1.3.6.1.4.1.3764.1.1.200.20.90.10.1.4	INTEGER	read-only
ADI onlineStatus	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.5	AdicOnlineStatus	read-write
INT operatingMode	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.11	INTEGER	read-write	Controls library behavior when retrieving tape from drives.
persistentData	1.3.6.1.4.1.3764.1.1.200.20.30
persistentDataEntry	1.3.6.1.4.1.3764.1.1.200.20.30.10.1		not-accessible
persistentDataTable	1.3.6.1.4.1.3764.1.1.200.20.30.10		not-accessible
ADI phCleaningMediaBarcode	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.5	AdicBarCode	read-write	This object is optional Barcode (if present).
phCleaningMediaEntry	1.3.6.1.4.1.3764.1.1.200.20.80.140.1		not-accessible	This entry object is optional
ADI phCleaningMediaImportTimestamp	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.8	AdicDateAndTime	read-only	This object is optional Timestamp when this cartridge was imported. Compatible with the SMIv2 DateAndTime textual convention. Encode is as follows: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
INT phCleaningMediaMaxUses	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.7	INTEGER	read-write	This object is optional Maximum number of uses for this cartidge.
INT phCleaningMediaRow	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.1	INTEGER	read-only	This object is optional
INT phCleaningMediaStatus	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.2	INTEGER	read-only	This object is optional Cleaning storage is allocated by segment; the value of phCleaningMediaStatus indicates if the slot is being used to store a cartridge or not. allocated(1) means this slot is home to cartridge. unallocated(2) means there is no cartridge associated with this slot.
phCleaningMediaTable	1.3.6.1.4.1.3764.1.1.200.20.80.140		not-accessible	This table is optional This is a combination of data about slots reserved for automatic cleaning and the cleaning cartridges themselves. Since the relationship between slots and cartridges is one-to-one, we can combine these data.
INT phCleaningMediaTypeIndex	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.3	INTEGER	read-write	This object is optional Exact media type of this cleaning cartridge. Value points to a row in the Media Type table with mediaTypeIndex = phCleaningMediaTypeIndex.
INT phCleaningMediaUseCount	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.6	INTEGER	read-write	This object is optional Use count. May be set to any value to accomodate importing cartridges that have already been used.
STR phCleaningMediaVendorId	1.3.6.1.4.1.3764.1.1.200.20.80.140.1.4	DisplayString	read-write	This object is optional Vendor of drives that this cleaning cartridge is designed to clean. Value points to a row in the Vendor table with vendorIdIndex = phCleaningMediaVendorId.
phCleaningSegEntry	1.3.6.1.4.1.3764.1.1.200.20.80.85.1		not-accessible	This entry object is optional
ROW phCleaningSegRowStatus	1.3.6.1.4.1.3764.1.1.200.20.80.85.1.2	RowStatus	read-write	This object is optional Management application use this object to to reserve segment for cleaning or release the segment for use as storage.
INT phCleaningSegSize	1.3.6.1.4.1.3764.1.1.200.20.80.85.1.1	INTEGER	read-only	This object is optional Number of elements in this segment.
phCleaningSegTable	1.3.6.1.4.1.3764.1.1.200.20.80.85		not-accessible	This table is optional This is a list of all the storage segments in the library which have been reserved for use by automatic cleaning services.
BOO phDriveAutoCleaning	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.10	Boolean	read-write	Add or remove this drive from automatic cleaning list.
INT phDriveCommand	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.16	INTEGER	read-write	Perform various operations on a drive: *************************************** online(1) - bring drive online offline(2) - take drive offline reset(3) - perform a warm reset powerOn(4) - perform power on powerOff(5) - peform power off powerCycle(6) - perform power cycle driveBrickUpdate(7) - download firmware to the drive brick
BOO phDriveCompressionOn	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.18	Boolean	read-write	Is compression turned on for this drive?
INT phDriveElementAddr	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.2	INTEGER	read-only	SCSI Element Address for this drive element.
phDriveEntry	1.3.6.1.4.1.3764.1.1.200.20.80.110.1		not-accessible
OCT phDriveErrorCodeBytes	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.30	OCTET STRING	read-only	String of bytes which contains error information about the drive. The meaning of each byte is as follows: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ byte 0: drive seven segment display code
INT phDriveFcHardId	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.14	INTEGER	read-write	Preferred port ID Mode for Fibre Channel interface drives, undefined for other interface type drives. Used only when port ID mode is set to 'hard'.
INT phDriveFcLoopId	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.12	INTEGER	read-only	Loop ID for Fibre Channel interface drives, undefined for other interface type drives.
INT phDriveFcLoopIdMode	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.13	INTEGER	read-write	Loop ID Mode for Fibre Channel interface drives, undefined for other interface type drives. Controls negotiation of the port ID on the Fibre Channel connection.
INT phDriveFcPortId	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.17	INTEGER	read-only	Port ID for fabric attached Fibre Channel drives, undefined for other interface type drives.
STR phDriveFirmwareVersion	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.27	DisplayString	read-only	Firmware version for this drive.
NUM phDriveInterfaceType	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.11	AdicInterfaceType	read-only	Data interface type (SCSI, Fibre Channel, etc.).
INT phDriveMbytesRead	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.25	INTEGER	read-only	Number of megabytes of data read from this drive.
INT phDriveMbytesWritten	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.26	INTEGER	read-only	Number of megabytes of data written to this drive.
INT phDriveNeedsCleaning	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.9	INTEGER	read-write
INT phDriveNumCleans	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.21	INTEGER	read-only	Total number of cleaning operations peroformed on this drive. Count is for the entire lifetime of the drive.
INT phDriveNumLoads	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.20	INTEGER	read-only	Total number of loads for this drive. Count is for the entire lifetime of the drive.
ADI phDriveOnlineStatus	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.29	AdicOnlineStatus	read-only	Returns either online(1) or offline(2). The shutdown(3) state is not applicable to this object. To change the online state of the drive, set the phDriveCommand object to online(1) or offline(2).
phDrivePorts	1.3.6.1.4.1.3764.1.1.200.20.80.116
INT phDrivePowerStatus	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.22	INTEGER	read-only	Is this drive powered on?
STR phDriveProduct	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.7	DisplayString	read-only	Product name of this drive.
ADI phDriveRasStatus	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.31	AdicStatusGroupState	read-only	RAS status for this individual drive.
INT phDriveReadErrors	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.23	INTEGER	read-only	Number of read errors for this drive. Count is for the entire lifetime of the drive.
OID phDriveREDId	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.28	AdicREDIdentifier	read-only	Runtime Error Detection identifier for this tape drive.
INT phDriveRow	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.1	INTEGER	read-only	Row coordinate value for this drive element.
INT phDriveScsiId	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.3	INTEGER	read-write
INT phDriveScsiLun	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.4	INTEGER	read-write
phDriveSegEntry	1.3.6.1.4.1.3764.1.1.200.20.80.80.1		not-accessible
NUM phDriveSegInterfaceType	1.3.6.1.4.1.3764.1.1.200.20.80.80.1.3	AdicInterfaceType	read-only	Data interface type of this segment.
INT phDriveSegMediaType	1.3.6.1.4.1.3764.1.1.200.20.80.80.1.2	INTEGER	read-only	Exact media type of this segment. With phSegmentMediaDomain, points a row in the media type table.
INT phDriveSegSize	1.3.6.1.4.1.3764.1.1.200.20.80.80.1.1	INTEGER	read-only	Number of drive elements in this segment.
phDriveSegTable	1.3.6.1.4.1.3764.1.1.200.20.80.80		not-accessible	This is a list of all the drive segments in the library, indexed by their media domain, media type and segment index.
STR phDriveSerialNumber	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.8	DisplayString	read-only
phDriveStatHistoryEntry	1.3.6.1.4.1.3764.1.1.200.20.80.112.1		not-accessible
phDriveStatHistoryTable	1.3.6.1.4.1.3764.1.1.200.20.80.112		not-accessible	This table contains historical data on drive operations. Each row in the table gives various statistical data for a single drive over a one hour period. The table is indexed such that phIndex = 0 is the current hour's data, phIndex = 1 is one hour ago, phIndex = 2 is two hours ago, etc.
INT phDriveStatus	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.15	INTEGER	read-only
phDriveTable	1.3.6.1.4.1.3764.1.1.200.20.80.110		not-accessible
STR phDriveVendor	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.6	DisplayString	read-only	Name of the vendor of this drive.
INT phDriveWriteErrors	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.24	INTEGER	read-only	Number of write errors for this drive. Count is for the entire lifetime of the drive.
BOO phDriveWriteProtected	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.19	Boolean	read-write	Is write protection turned on for this drive?
STR phDriveWwn	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.5	DisplayString	read-only	World Wide Node Name for this drive.
STR phDriveWwPortName	1.3.6.1.4.1.3764.1.1.200.20.80.110.1.32	DisplayString	read-only	World Wide Port Name for this drive.
phFrameEntry	1.3.6.1.4.1.3764.1.1.200.20.80.41.1		not-accessible	This entry object is optional
INT phFrameNumRacks	1.3.6.1.4.1.3764.1.1.200.20.80.41.1.3	INTEGER	read-write	This object is optional Number of racks in this frame.
STR phFrameSerialNumber	1.3.6.1.4.1.3764.1.1.200.20.80.41.1.2	DisplayString	read-write	This object is optional Serial number of this frame, if available.
phFrameTable	1.3.6.1.4.1.3764.1.1.200.20.80.41		not-accessible	This table is optional This is a list of all the frames in the library.
ADI phFrameType	1.3.6.1.4.1.3764.1.1.200.20.80.41.1.1	AdicComponentType	read-write	This object is optional Physical type of frame. Only controlModule(6) and expansionModule(7) values are actually valid for the frame type.
phGeneralInfoEntry	1.3.6.1.4.1.3764.1.1.200.20.80.10.1		not-accessible
phGeneralInfoTable	1.3.6.1.4.1.3764.1.1.200.20.80.10		not-accessible
INT phHourIndex	1.3.6.1.4.1.3764.1.1.200.20.80.112.1.1	INTEGER	read-only	Index into the historical data. The integer value is the number in the past the data the data was collected. For example, phHourIndex = 0 means the current hour's statistics, phHourIndex = 1 means one hour in the past, phHourIndex = 2 means two hours in the past.
INT phHourlyMBytesRead	1.3.6.1.4.1.3764.1.1.200.20.80.112.1.2	INTEGER	read-only	Number of megabytes read by this drive during the one hour period indicated by phHourIndex.
INT phHourlyMBytesWritten	1.3.6.1.4.1.3764.1.1.200.20.80.112.1.3	INTEGER	read-only	Number of megabytes written by this drive during the one hour period indicated by phHourIndex.
INT phHourlyMounts	1.3.6.1.4.1.3764.1.1.200.20.80.112.1.4	INTEGER	read-only	Number of mounts performed by this drive during the one hour period indicated by phHourIndex.
INT phIeElementAddr	1.3.6.1.4.1.3764.1.1.200.20.80.100.1.2	INTEGER	read-only	This object is optional SCSI Medium Changer Element Address for this I/E slot.
ADI phIeMediaId	1.3.6.1.4.1.3764.1.1.200.20.80.100.1.4	AdicBarCode	read-only	This object is optional Media ID bar code of cartridge in this I/E slot, if present and available. Returns zero length string if the bar code is not available for any reason.
INT phIeMediaPresent	1.3.6.1.4.1.3764.1.1.200.20.80.100.1.3	INTEGER	read-only	This object is optional Is a media cartridge present in this slot? Values are: yes(1) - system is certain that a cartridge is present. no(2) - system is certain that a cartridge is not present. error(3) - an error ocurred while determining if media is present.
INT phIeRow	1.3.6.1.4.1.3764.1.1.200.20.80.100.1.1	INTEGER	read-only	This object is optional Row coordinate value for this I/E slot
INT phIeSegCommand	1.3.6.1.4.1.3764.1.1.200.20.80.70.1.5	INTEGER	read-write	This object is optional Issue a command to this I/E station.
phIeSegEntry	1.3.6.1.4.1.3764.1.1.200.20.80.70.1		not-accessible	Some objects in this entry are optional
INT phIeSegOnlineStatus	1.3.6.1.4.1.3764.1.1.200.20.80.70.1.4	INTEGER	read-write	This object is optional Takes this I/E segment online/offline.
INT phIeSegReserve	1.3.6.1.4.1.3764.1.1.200.20.80.70.1.2	INTEGER	read-write	This object is optional Mechanism to release and reserve this I/E segment.
INT phIeSegReservedBy	1.3.6.1.4.1.3764.1.1.200.20.80.70.1.3	INTEGER	read-write	This object is optional Indicator of who reserved this I/E segment.
INT phIeSegSize	1.3.6.1.4.1.3764.1.1.200.20.80.70.1.1	INTEGER	read-only	Number of elements in this segment.
phIeSegTable	1.3.6.1.4.1.3764.1.1.200.20.80.70		not-accessible	Some objects in this table are optional This is a list of all the I/E segments in the library, indexed by their media domain and segment index.
phIeSlotEntry	1.3.6.1.4.1.3764.1.1.200.20.80.100.1		not-accessible	This entry object is optional
phIeSlotTable	1.3.6.1.4.1.3764.1.1.200.20.80.100		not-accessible	This table is optional
ADI phIeStationDoorStatus	1.3.6.1.4.1.3764.1.1.200.20.80.75.1.2	AdicDoorStatus	read-only	Is the station door open/closed, locked/unlocked ?
phIeStationEntry	1.3.6.1.4.1.3764.1.1.200.20.80.75.1		not-accessible
INT phIeStationNumber	1.3.6.1.4.1.3764.1.1.200.20.80.75.1.1	INTEGER	read-only	Index of I/E station within a frame. If a frame has N I/E stations, the range of phIeStationNumber is 1 through N.
OID phIeStationREDId	1.3.6.1.4.1.3764.1.1.200.20.80.75.1.3	AdicREDIdentifier	read-only	Runtime Error Detection identifier for this import/export station.
phIeStationTable	1.3.6.1.4.1.3764.1.1.200.20.80.75		not-accessible	This is a list of all the I/E stations in the library
ADI phMediaBarCode	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.1	AdicBarCode	read-only
INT phMediaCapacity	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.8	INTEGER	read-only	Capacity of this cartridge in megabytes. Returns -1 if capacity is unknown.
INT phMediaDomain	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.2	INTEGER	read-only
INT phMediaElementAddress	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.4	INTEGER	read-only	Element address where this cartridge is physically located.
phMediaEntry	1.3.6.1.4.1.3764.1.1.200.20.80.120.1		not-accessible
BOO phMediaExported	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.10	Boolean	read-only	Has this cartridge been exported from the library?
ADI phMediaExportTimestamp	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.12	AdicDateAndTime	read-only	Timestamp when cartridge was exported. Compatible with the SMIv2 DateAndTime textual convention. Encode is as follows: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
INT phMediaFreeSpace	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.9	INTEGER	read-only	Amount of free space on this cartridge in megabytes. Returns -1 if free space is unknown.
ADI phMediaImportTimestamp	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.11	AdicDateAndTime	read-only	Timestamp when cartridge was imported. Compatible with the SMIv2 DateAndTime textual convention. Encode is as follows: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
INT phMediaMounts	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.5	INTEGER	read-only	Number of times this cartridge has been mounted.
INT phMediaReadErrors	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.6	INTEGER	read-only	Number of errors when reading from this cartridge.
phMediaTable	1.3.6.1.4.1.3764.1.1.200.20.80.120		not-accessible
INT phMediaType	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.3	INTEGER	read-only
INT phMediaWriteErrors	1.3.6.1.4.1.3764.1.1.200.20.80.120.1.7	INTEGER	read-only	Number of errors when writing to this cartridge.
INT phSegmentAisle	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.1	INTEGER	read-only	Aisle coordinate value for this segment.
INT phSegmentCodStatus	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.11	INTEGER	read-only	Capacity on Demand (COD) status for this segment. noCod means that COD is not enabled for this library.
INT phSegmentCol	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.5	INTEGER	read-only	Column coordinate value for this segment.
phSegmentEntry	1.3.6.1.4.1.3764.1.1.200.20.80.55.1		not-accessible
INT phSegmentFrame	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.2	INTEGER	read-only	Frame coordinate value for this segment.
INT phSegmentMediaDomain	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.9	INTEGER	read-only	Element domain of this segment. Points a row in the media domain table.
INT phSegmentRack	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.3	INTEGER	read-only	Rack coordinate value for this segment.
INT phSegmentSection	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.4	INTEGER	read-only	Section coordinate for this segment.
INT phSegmentSize	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.7	INTEGER	read-only	Number of elements in this segment.
INT phSegmentStartingRow	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.6	INTEGER	read-only	Row coordinate of the first element in this segment. This is useful to divide a column into multiple segments. For instance, a segment which contains rows 1 - 10 would have phSegmentStartingRow = 1. A segment which contains rows 11 - 20 in the same column would have phSegmentStartingRow = 11.
INT phSegmentStatus	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.10	INTEGER	read-only	Status of this segment. May be installed, not installed, or reserved for use by the automatic cleaning service.
phSegmentTable	1.3.6.1.4.1.3764.1.1.200.20.80.55		not-accessible	This is a list of all the segments in the library.
ADI phSegmentType	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.8	AdicSegmentType	read-only	This segment's type (storage, drive, I/E, etc.).
INT phSegStartingAddress	1.3.6.1.4.1.3764.1.1.200.20.80.55.1.12	INTEGER	read-only	SCSI media changer element address of the first row in this segment. Element addresses are contiguous, so we can derive the address of each row in the segment from the address of the first row.
INT phStorageElementAddr	1.3.6.1.4.1.3764.1.1.200.20.80.90.1.2	INTEGER	read-only	This object is optional SCSI Medium Changer Element Address for this storage slot.
INT phStorageRow	1.3.6.1.4.1.3764.1.1.200.20.80.90.1.1	INTEGER	read-only	This object is optional Row coordinate value for this storage slot.
phStorageSegEntry	1.3.6.1.4.1.3764.1.1.200.20.80.60.1		not-accessible
INT phStorageSegSize	1.3.6.1.4.1.3764.1.1.200.20.80.60.1.1	INTEGER	read-only	Number of elements in this segment.
phStorageSegTable	1.3.6.1.4.1.3764.1.1.200.20.80.60		not-accessible	This is a list of all the storage segments in the library, indexed by their media domain and segment Index.
phStorageSlotEntry	1.3.6.1.4.1.3764.1.1.200.20.80.90.1		not-accessible	This entry object is optional
phStorageSlotTable	1.3.6.1.4.1.3764.1.1.200.20.80.90		not-accessible	This table is optional
phTransportDomainEntry	1.3.6.1.4.1.3764.1.1.200.20.80.132.1		not-accessible	This entry object is optional
INT phTransportDomainIndex	1.3.6.1.4.1.3764.1.1.200.20.80.132.1.1	INTEGER	read-only	This object is optional
phTransportDomainTable	1.3.6.1.4.1.3764.1.1.200.20.80.132		not-accessible	This table is optional
INT phTransportElementAddress	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.1	INTEGER	read-only	This object is optional
phTransportEntry	1.3.6.1.4.1.3764.1.1.200.20.80.130.1		not-accessible	This entry object is optional
INT phTransportNumPuts	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.5	INTEGER	read-only	This object is optional Number put operations for this transport element. The count is for the entire lifetime of the library.
INT phTransportNumRecoveredGets	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.2	INTEGER	read-only	This object is optional Number of recovered get operations for this transport element. The count is for the entire lifetime of the library.
INT phTransportNumRecoveredPuts	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.3	INTEGER	read-only	This object is optional Number of recovered put operations for this transport element. The count is for the entire lifetime of the library.
INT phTransportNumRecoveredScans	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.4	INTEGER	read-only	This object is optional Number of recovered scan operations for this transport element. The count is for the entire lifetime of the library.
OID phTransportREDId	1.3.6.1.4.1.3764.1.1.200.20.80.130.1.6	AdicREDIdentifier	read-only	This object is optional Runtime Error Detection identifier for this tape drive.
phTransportTable	1.3.6.1.4.1.3764.1.1.200.20.80.130		not-accessible	This table is optional
physicalLibrary	1.3.6.1.4.1.3764.1.1.200.20.80
NTF physLibraryActivity	1.3.6.1.4.1.3764.1.1.200.20.0.100
ADI physLibraryAutoCleaning	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.15	AdicEnable	read-write	Enable/disable automatic drive cleaning for the entire physical library.
NTF physLibraryConfigurationChange	1.3.6.1.4.1.3764.1.1.200.20.0.115			The physical configuration of the library has been changed, possibly invalidating the data in the management application's model. For example, an LTO magazine swapped for a DLT magazine. The management application should repopulate its data model.
ADI physLibraryDoorStatus	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.16	AdicDoorStatus	read-only	State of the library door: (open/closed,locked/unlocked).
NTF physLibraryDoorStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.102
INT physLibraryManagerLun	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.14	INTEGER	read-only	The SCSI logical unit number of the Physical Library Manager.
NTF physLibraryOnlineStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.101
NTF physLibraryRESChange	1.3.6.1.4.1.3764.1.1.200.20.0.116			The physical library managers issues this trap when it detects that the Read Element Status data has changed. This generally occurs after an inventory. The range of elements specified by the last two varbinds may represent storage drive, or I/E elements.
NTF powerGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.404			The overall state of the power system status group has changed. The present state of the power status group is given by the value of the rasStatusGroupStatus object in the trap payload.
ADI preferredSpeed	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.6	AdicEthernetSpeed	read-write	The preferred Ethernet speed for this Ethernet port.
STR previousFirmwareVersion	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.6	DisplayString	read-only	Previous firmware revision on the i2000 that is available for rollback.
INT processPhysicalMemory	1.3.6.1.4.1.3764.1.1.200.20.20.10.1.3	INTEGER	read-only	The size in kilobytes of the actual software process binary.
INT processResidentMemory	1.3.6.1.4.1.3764.1.1.200.20.20.10.1.4	INTEGER	read-only	The size in kilobytes of the software process portion that is currently resident in memory.
ROW processRowStatus	1.3.6.1.4.1.3764.1.1.200.20.20.10.1.2	RowStatus	read-write	Row status object for creating/deleting system components.
INT productDrivesMax	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.4	INTEGER	read-write
INT productDrivesMin	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.3	INTEGER	read-write
STR productId	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.6	DisplayString	read-write
productIdEntry	1.3.6.1.4.1.3764.1.1.200.20.90.17.1		not-accessible
INT productIdIndex	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.1	INTEGER	read-only
STR productIdName	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.2	DisplayString	read-write
productIdTable	1.3.6.1.4.1.3764.1.1.200.20.90.17		not-accessible	Table of possible product names and configuration constraints.
INT productIeMax	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.8	INTEGER	read-write
INT productIeMin	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.7	INTEGER	read-write
INT productSlotsMax	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.6	INTEGER	read-write
INT productSlotsMin	1.3.6.1.4.1.3764.1.1.200.20.90.17.1.5	INTEGER	read-write
ras	1.3.6.1.4.1.3764.1.1.200.20.100
NTF rasEventNotification	1.3.6.1.4.1.3764.1.1.200.20.0.406			A RAS event has occurred, possibly requiring action by the management application.
GAU rasFruInstanceId	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.2	Gauge	read-only	Uniquely identifies the FRU instance.
rasFruStatEntry	1.3.6.1.4.1.3764.1.1.200.20.100.50.1		not-accessible	Each entry contains information for a single FRU.
ADI rasFruStatFirstReportTime	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.6	AdicDateAndTime	read-only	Time when the first RAS report was generated for this FRU.
INT rasFruStatFruCategory	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.4	INTEGER	read-only	Category to which this FRU belongs.
INT rasFruStatFruId	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.5	INTEGER	read-only	FRU identifier.
INT rasFruStatIndex	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.1	INTEGER	read-only	Flat index for the FRU statistics table.
ADI rasFruStatLastReportTime	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.7	AdicDateAndTime	read-only	Time when the most recent RAS report was generated for this FRU.
INT rasFruStatOpenTickets	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.9	INTEGER	read-only	Number of RAS tickets currently open against this FRU.
ADI rasFruStatSerialNumber	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.10	AdicFruSerialNumber	read-only	The unique serial number of the FRU.
INT rasFruStatState	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.11	INTEGER	read-only	State = current(1) indicates that the FRU is currently installed. State = old(2) indicates that the FRU has been removed and the data is historic.
ADI rasFruStatStatusGroup	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.3	AdicStatusGroup	read-only	Status group to which this FRU belongs.
rasFruStatTable	1.3.6.1.4.1.3764.1.1.200.20.100.50		not-accessible	Each row dsecribes the history and RAS statistics for a single FRU.
INT rasFruStatTotalTickets	1.3.6.1.4.1.3764.1.1.200.20.100.50.1.8	INTEGER	read-only	Total number of RAS tickets created against this FRU, both open and closed tickets.
STR rasReportDescription	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.7	DisplayString	read-write
rasReportEntry	1.3.6.1.4.1.3764.1.1.200.20.100.30.1		not-accessible	Each entry contains information for a single RAS Report.
ADI rasReportGroupStatus	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.6	AdicStatusGroupState	read-write	Status determination that this report indicates against the specific FRU.
INT rasReportHeadReport	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.11	INTEGER	read-only	The head report field allows reports to be sorted according to FRU branch.
GAU rasReportId	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.1	Gauge	read-only	Identifies the RAS Report for which this this row object contains information. The RAS system defines the report ID as an unsigned 32 bit integer, so it is declared here as a Guage32.
OCT rasReportOrcData	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.5	OCTET STRING	read-write	Event payload generated by the reporting subsystem.
STR rasReportOrcDescription	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.8	DisplayString	read-only	Description of the operation result code.
INT rasReportRepeatCounter	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.9	INTEGER	read-only	Number of times an identical report has been generated.
ROW rasReportRowStatus	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.2	RowStatus	read-write	Controls creation and deletion of rows in the RAS Report table.
ADI rasReportSerialNumber	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.10	AdicFruSerialNumber	read-only
ADI rasReportStatusGroup	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.4	AdicStatusGroup	read-write	The subsystem that is reporting the event.
rasReportTable	1.3.6.1.4.1.3764.1.1.200.20.100.30		not-accessible	Contains one row for each ticket/report combination in the database. The table is indexed off the RAS Ticket Table, it may contain many RAS Report entries for a single RAS Ticket.
ADI rasReportTimestamp	1.3.6.1.4.1.3764.1.1.200.20.100.30.1.3	AdicDateAndTime	read-only	Time when this event was generated.
INT rasStatusGroupActionsPending	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.7	INTEGER	read-only	The number of actions pending against this system status group.
ADI rasStatusGroupIndex	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.1	AdicStatusGroup	read-only	Identifies the system status group for which this row object contains information.
ADI rasStatusGroupLastChange	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.8	AdicDateAndTime	read-only	Timestamp of the last time the status changed.
INT rasStatusGroupOpenTickets	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.6	INTEGER	read-only	The number of RAS tickets currently open against this system status group.
ADI rasStatusGroupPreviousStatus	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.3	AdicStatusGroupState	read-only	After a state change, this object gives the previous state of the system status group. If there is no previous state information available, such as when resetting the system, the previous state is 'indeterminate'.
ADI rasStatusGroupStatus	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.2	AdicStatusGroupState	read-only	The status (or condition) of this system status group. Use of the 'indeterminate' state: 'indeterminate' is primarily for use in the rasStatusGroupPreviousStatus object, where there may not be any previous state information.
STR rasStatusGroupTextSummary	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.4	DisplayString	read-only	A brief message describing the state of this system status group. If the rasStatusGroupStatus is other than 'good', this object should return the reason why this is so.
INT rasStatusGroupTotalTickets	1.3.6.1.4.1.3764.1.1.200.20.100.10.1.5	INTEGER	read-only	The total number of RAS tickets created against this system status group.
rasSystemStatusEntry	1.3.6.1.4.1.3764.1.1.200.20.100.10.1		not-accessible	Information for a particular system status group. The componentId index refers to the MCB through which the management application accesses the RAS manager. The rasStatusGroupIndex specifies the system status group for which the entry contains information.
rasSystemStatusTable	1.3.6.1.4.1.3764.1.1.200.20.100.10		not-accessible	Contains status information for various system status groups.
INT rasTicketClosedBy	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.9	INTEGER	read-write
STR rasTicketComments	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.11	DisplayString	read-write
INT rasTicketCount	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.15	INTEGER	read-only	Number of times an attempt was made to open a duplicate ticket.
STR rasTicketDescription	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.6	DisplayString	read-write
rasTicketEntry	1.3.6.1.4.1.3764.1.1.200.20.100.20.1		not-accessible	Each entry contains information for a single RAS ticket. The componentId index refers to the MCB through which the management application accesses the RAS manager. The rasTicketId specifies the ticket instance.
rasTicketFilterEntry	1.3.6.1.4.1.3764.1.1.200.20.100.60.1		not-accessible
ADI rasTicketFilterSeverity	1.3.6.1.4.1.3764.1.1.200.20.100.60.1.3	AdicRasTicketSeverity	read-write	Identifies the ticket severity for which tickets will be returned. ========================================= high: Tickets/reports with status 'failed' only. medium: Tickets/reports with status 'failed' or 'warning'. low: All tickets/reports.
ADI rasTicketFilterState	1.3.6.1.4.1.3764.1.1.200.20.100.60.1.2	AdicRasTicketState	read-write	Identifies the ticket state (open, closed, etc.) for which tickets will be returned.
ADI rasTicketFilterStatusGroup	1.3.6.1.4.1.3764.1.1.200.20.100.60.1.1	AdicStatusGroup	read-write	Identifies the system status group for which tickets will be returned.
rasTicketFilterTable	1.3.6.1.4.1.3764.1.1.200.20.100.60		not-accessible	Contains filter settings for ticket table walking. Only those rows which match the filter criteria will appear in the RAS ticket table when traversed using GetNext or GetBulk.
ADI rasTicketGroupStatus	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.8	AdicStatusGroupState	read-only	Status determination that this ticket indicates against its system status group.
GAU rasTicketId	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.1	Gauge	read-only	Unique identifier for this ticket. The RAS system defines the ticket ID as an unsigned 32 bit integer, so it is declared here as a Guage32.
INT rasTicketKeyReport	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.16	INTEGER	read-only	Contains 0 or a valid rasReportId value. Indicates which report is currently responsible for the severity of the ticket.
INT rasTicketPriority	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.5	INTEGER	read-write
INT rasTicketQualifier	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.4	INTEGER	read-write
ROW rasTicketRowStatus	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.2	RowStatus	read-write	Controls creation and deletion of rows in this table. Creation of RAS tickets via SNMP is currently not permitted, so writing a value of createAndGo(4) or createAndWait(5) does not create a new row; it may return error indication.
ADI rasTicketSerialNumber	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.12	AdicFruSerialNumber	read-only
ADI rasTicketState	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.3	AdicRasTicketState	read-write
ADI rasTicketStatusGroup	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.7	AdicStatusGroup	read-only	System status group to which this ticket belongs.
rasTicketTable	1.3.6.1.4.1.3764.1.1.200.20.100.20		not-accessible	Contains one row for each ticket in the database.
ADI rasTicketTimeClosed	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.14	AdicDateAndTime	read-only	Date and time when ticket was closed.
ADI rasTicketTimeOpened	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.13	AdicDateAndTime	read-only	Date and time when ticket was opened.
INT rasTicketVerifiedBy	1.3.6.1.4.1.3764.1.1.200.20.100.20.1.10	INTEGER	read-write
ADI rcuInstallProcessStatus	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.16	AdicInstallStatus	read-only
STR rcuInstallStatusText	1.3.6.1.4.1.3764.1.1.200.20.20.20.1.11	DisplayString	read-only	Provides detailed information about the RCU component install Example: download status (inprogress, complete, failed, not being upgraded) : current component : time to complete RCU
NTF rcuNotReady	1.3.6.1.4.1.3764.1.1.200.20.0.111			The RCU indicated in the payload has transitioned from the NotReady state to the Ready state.
NTF rcuReady	1.3.6.1.4.1.3764.1.1.200.20.0.110			The RCU indicated in the payload has transitioned from the NotReady state to the Ready state.
INT readiness	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.6	INTEGER	read-only
registrationEntry	1.3.6.1.4.1.3764.1.1.200.20.70.10.1		not-accessible
ROW registrationRowStatus	1.3.6.1.4.1.3764.1.1.200.20.70.10.1.3	RowStatus	read-write	Controls creation/deletion of rows in the notification (trap registration) table.
registrationTable	1.3.6.1.4.1.3764.1.1.200.20.70.10		not-accessible
NTF roboticsGroupStatusChange	1.3.6.1.4.1.3764.1.1.200.20.0.405			The overall state of the robotics system status group has changed. The present state of the robotics status group is given by the value of the rasStatusGroupStatus object in the trap payload.
INT role	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.1	INTEGER	read-only	The role of this MCB in the management hierarchy.
security	1.3.6.1.4.1.3764.1.1.200.20.40
STR serialNumber	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.15	DisplayString	read-only	Serial Number of this logical library. Assigned by MCB when logical library is created.
INT softwareComponentIndex	1.3.6.1.4.1.3764.1.1.200.20.20.10.1.1	INTEGER	read-only	Identifies which piece of MCB software is being addressed.
softwareInstallationEntry	1.3.6.1.4.1.3764.1.1.200.20.20.20.1		not-accessible
softwareInstallationTable	1.3.6.1.4.1.3764.1.1.200.20.20.20		not-accessible	This table controls installation of software packages/updates.
ADI speedAutoNegotiation	1.3.6.1.4.1.3764.1.1.200.20.15.10.1.5	AdicEnable	read-write	Enables/disables automatic Ehternet speed negotiation.
ADI status	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.2	AdicAgentStatus	read-only	Status of this MCB.
ADI systemDateAndTime	1.3.6.1.4.1.3764.1.1.200.20.10.10.1.3	AdicDateAndTime	read-write	Current time as set on system realtime clock. Also allows system realtime clock to be set.
systemManager	1.3.6.1.4.1.3764.1.1.200.20.20
systemManagerEntry	1.3.6.1.4.1.3764.1.1.200.20.20.10.1		not-accessible	The MCB System Manager (MSM) provides the high level system management of the MCB. The primary role of the MSM is to configure, initialize, and maintain the software processes running on the MCB.
systemManagerTable	1.3.6.1.4.1.3764.1.1.200.20.20.10		not-accessible
NTF tapeDriveAdded	1.3.6.1.4.1.3764.1.1.200.20.0.105			A tape drive was added to the library. This trap is issued when a tape drive previously unknown to the library becomes known. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) phDriveRow - row component of the drive's physical location in the library.
NTF tapeDriveRemoved	1.3.6.1.4.1.3764.1.1.200.20.0.106			A tape drive was removed from the library. This trap is issued when a tape drive is removed from library's configuration. componentId - identifies MCB trapSequenceNumber - generic sequence number trapSeverity - should be informational(5) phDriveRow - row component of the drive's physical location in the library.
INT totalFreeCapacity	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.19	INTEGER	read-only	An estimate of the unused data capacity of the library. Units are gigabytes. May be computed by multiplying the number of empty cells by the maximum number of gigabytes per tape.
INT totalQuantityLicensed	1.3.6.1.4.1.3764.1.1.200.20.50.30.1.2	INTEGER	read-only	The total licensed quantity for this feature. For features which are licensed by quantity, this object returns the sum of the indiviual quantities enabled by each license key (see licenseFeatureQuantity). For example, if there were two COD license keys installed, one for 500 slots and one for 1000 slots, totalQuantityLicensed would return 1500.
INT totalRawCapacity	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.18	INTEGER	read-only	An estimate of the amount of data which the library can hold. Units are gigabytes. May be computed by multiplying the number of cells by the maximum number of gigabytes per tape.
INT totalUsedCapacity	1.3.6.1.4.1.3764.1.1.200.20.80.10.1.20	INTEGER	read-only	An estimate of the used data capacity of the library. Units are gigabytes. May be computed by multiplying the number of full cells by the maximum number of gigabytes per tape.
INT udpPort	1.3.6.1.4.1.3764.1.1.200.20.70.10.1.2	INTEGER	read-write	UDP Port number on which to send/forward SNMP traps.
userEntry	1.3.6.1.4.1.3764.1.1.200.20.40.20.1		not-accessible	This entry object is obsolete.
STR userGroup	1.3.6.1.4.1.3764.1.1.200.20.40.20.1.3	DisplayString	read-write	This object is obsolete. User's group.
STR userLibAccessList	1.3.6.1.4.1.3764.1.1.200.20.40.20.1.5	DisplayString	read-write	This object is obsolete. Delimited list of logical library identifiers to which this use has access.
STR userName	1.3.6.1.4.1.3764.1.1.200.20.40.20.1.1	DisplayString	read-write	This object is obsolete. User's name.
STR userPassword	1.3.6.1.4.1.3764.1.1.200.20.40.20.1.4	DisplayString	read-write	This object is obsolete. User's password.
ROW userRowStatus	1.3.6.1.4.1.3764.1.1.200.20.40.20.1.2	RowStatus	read-write	This object is obsolete. Standard Row Status object. Used primarily to delete users.
userTable	1.3.6.1.4.1.3764.1.1.200.20.40.20		not-accessible	This table is obsolete.
STR vendorId	1.3.6.1.4.1.3764.1.1.200.20.90.20.1.5	DisplayString	read-write
vendorIdEntry	1.3.6.1.4.1.3764.1.1.200.20.90.15.1		not-accessible
INT vendorIdIndex	1.3.6.1.4.1.3764.1.1.200.20.90.15.1.1	INTEGER	read-only
vendorIdTable	1.3.6.1.4.1.3764.1.1.200.20.90.15		not-accessible	Table of possible vendors.
STR vendorName	1.3.6.1.4.1.3764.1.1.200.20.90.15.1.2	DisplayString	read-write

RFC description

Manages ADIC Enterprise Management Control Blade (MCB) for tape library and storage systems.

Start monitoring ADIC (Quantum) Scalar tape libraries with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADIC-MANAGEMENT-MIB

What Is ADIC-MANAGEMENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description