All MIBs › ADIC-MANAGEMENT-MIB › loMediaTypeCheckingPolicy
loMediaTypeCheckingPolicy
Module: ADIC-MANAGEMENT-MIB
OID (symbolic): ADIC-MANAGEMENT-MIB::loMediaTypeCheckingPolicy
OID (numeric): 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Allows the user to specify special handling of media type information in barcodes. Values are:
0 - media type checking disabled; media type as derived from barcode is irrelevant. 911 - 'required'; barcode MUST be a valid ADIC barcode, the correct media type may be derived from the barcode using the ADIC algorithm. Other - 'override'; the media type may not be derived from the barcode, use this value instead. The value map is the same as the mediaTypeIndex variable: the logical library's mediaDomain variable specifies the media domain and loMediaTypeCheckingPolicy specifies the media type that will be assumed for all media in this logical library.
What is loMediaTypeCheckingPolicy?
This OID defines how strictly the library enforces media-type validation: disabled (0), strictly required using ADIC algorithm (911), or other custom override modes. Operators use this to balance between safety (enforcing correct media) and flexibility (allowing non-standard barcodes in exceptions). A value of 911 means any barcode must follow ADIC's format rules, while 0 means the system ignores type checking entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19 snmpwalk -v2c -c public <target> ADIC-MANAGEMENT-MIB::loMediaTypeCheckingPolicy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19.1 snmpget -v2c -c public <target> ADIC-MANAGEMENT-MIB::loMediaTypeCheckingPolicy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19.1 i <value>
Start monitoring ADIC (Quantum) Scalar tape libraries with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADIC-MANAGEMENT-MIB::loMediaTypeCheckingPolicy OID value, configure state conditions and alerts, and monitor any ADIC (Quantum) Scalar tape libraries from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3764 | adic | ADIC-INTELLIGENT-STORAGE-MIB |
| 1.3.6.1.4.1.3764.1 | storage | ADIC-INTELLIGENT-STORAGE-MIB |
| 1.3.6.1.4.1.3764.1.1 | intelligent | ADIC-INTELLIGENT-STORAGE-MIB |
| 1.3.6.1.4.1.3764.1.1.200 | hardware | ADIC-INTELLIGENT-STORAGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3764.1.1.200.20 | management | ADIC-MANAGEMENT-MIB |
| 1.3.6.1.4.1.3764.1.1.200.20.90 | logicalLibrary | ADIC-MANAGEMENT-MIB |
| 1.3.6.1.4.1.3764.1.1.200.20.90.20 | logicalLibraryTable | ADIC-MANAGEMENT-MIB |
| 1.3.6.1.4.1.3764.1.1.200.20.90.20.1 | logicalLibraryEntry | ADIC-MANAGEMENT-MIB |
| 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.19 | loMediaTypeCheckingPolicy | ADIC-MANAGEMENT-MIB |