All MIBs › BLUEARC-SERVER-MIB
Organization: BlueArc UK Ltd.
Last Updated: 2010-04-08
Category: Fibre Channel and Storage
Description: Monitors BlueArc (Hitachi Data Systems) NAS storage server performance, capacity, and service health.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BLUEARC-SERVER-MIB?
BLUEARC-SERVER-MIB is BlueArc's (later acquired by Hitachi Data Systems) proprietary MIB for monitoring its NAS (Network Attached Storage) server appliances, covering the vendor's private enterprise SNMP subtree for the BlueArc server product line. Per its stated purpose it is intended to expose performance, capacity, and service-health data for the storage server, though only its top-level object identifiers were captured here rather than the individual leaf/table objects beneath them. Because the underlying data objects are not available in the provided sample, the specific monitorable parameters cannot be honestly enumerated, but the module's stated scope indicates it would support hardware/software status monitoring such as storage capacity utilization and file-service availability. It is a self-contained vendor MIB rooted under BlueArc's private enterprise branch, without an apparent dependency captured here on other standard MIBs. Typical deployment context is a BlueArc/Hitachi NAS storage head unit in an enterprise data center, where BLUEARC-SERVER-MIB SNMP monitoring supports capacity planning and service-uptime tracking.
IPNetwork Monitor allows you to monitor SNMP objects defined in BLUEARC-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- BlueArc/Hitachi Data Systems NAS storage servers
Monitoring Examples
Only the root nodes blueArc and blueArcPrivate were captured in the available sample objects, with no specific leaf or table objects beneath them, so a concrete monitoring scenario citing real object names cannot be constructed honestly; per the module's stated purpose, one would expect the private subtree to contain performance, storage-capacity, and file-service status objects for the NAS server.
This MIB depends on
Related MIBs
Imported Objects
From RFC1213-MIB
| ifIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises | |
| mib-2 |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using fcRequests OID:
Select a BlueArc (Hitachi Data Systems) NAS storage server (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fcRequests into the Find box to locate it in the OID tree, then select it and click OK. The total number of requests issued through the fibre channel interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| access | 1.3.6.1.4.1.11096.6.1.1.5.3 | |||
| C32 access3Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.5 | Counter32 | read-only | The total number of 'Access' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| advipConfig | 1.3.6.1.4.1.11096.6.1.1.2.4 | |||
| alerts | 1.3.6.1.4.1.11096.6.1.1.5.5 | |||
| STR atJobAccessLevel | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1.5 | DisplayString | read-only | The access level at which the at job is run. |
| STR atJobCommandList | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1.3 | DisplayString | read-only | A semi-colon separated list of commands to be run as part of the at job. |
| atJobEntry | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1 | not-accessible | At job information. | |
| I32 atJobIndex | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1.1 | Integer32 | read-only | A unique value for each at job entry. |
| STR atJobMailList | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1.4 | DisplayString | read-only | A semi-colon separated list of recipients who each are to receive a copy of the output generated as a result of running the cron job. NOTE: This value will be a zero length string if the output of running the job is not be emailed. |
| I32 atJobNumber | 1.3.6.1.4.1.11096.6.1.1.5.8.3 | Integer32 | read-only | The number of at jobs configured to run on this system. |
| STR atJobRunTime | 1.3.6.1.4.1.11096.6.1.1.5.8.4.1.2 | DisplayString | read-only | The date at which the at job is scheduled to run expressed as a local time in the format YYYY-MM-DD HH:MI (Local) |
| atJobTable | 1.3.6.1.4.1.11096.6.1.1.5.8.4 | not-accessible | A table containing a list of all at jobs configured to run on this system. The number of entries in this table is given by the value of atJobNumber. | |
| STR autoChangerDeviceName | 1.3.6.1.4.1.11096.6.1.1.4.2.2.1.2 | DisplayString | read-only | The device name of the auto changer. |
| autoChangerEntry | 1.3.6.1.4.1.11096.6.1.1.4.2.2.1 | not-accessible | Auto changer information. | |
| STR autoChangerEVS | 1.3.6.1.4.1.11096.6.1.1.4.2.2.1.4 | DisplayString | read-only | The Enterprise Virtual Server to which this auto changer is assigned. |
| I32 autoChangerIndex | 1.3.6.1.4.1.11096.6.1.1.4.2.2.1.1 | Integer32 | read-only | A unique value for each auto changer detected. Its value ranges between 1 and the value of autoChangerNumber. |
| I32 autoChangerNumber | 1.3.6.1.4.1.11096.6.1.1.4.2.1 | Integer32 | read-only | The number of auto changers NDMP has detected. |
| STR autoChangerSerialNumber | 1.3.6.1.4.1.11096.6.1.1.4.2.2.1.3 | DisplayString | read-only | The serial number of the auto changer. |
| autoChangerTable | 1.3.6.1.4.1.11096.6.1.1.4.2.2 | not-accessible | A table containing a list of auto changers NDMP has detected. The number of entries in this table is given by the value of autoChangerNumber. | |
| automount | 1.3.6.1.4.1.11096.6.1.1.1.3.3 | |||
| automountEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1 | not-accessible | An automount configuration entry. This object is obsolete. Volumes are no longer automounted. | |
| I32 automountIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.1 | Integer32 | read-only | An identifier for the automount. Its value ranges between 1 and the value of automountNumber. This object is obsolete. Volumes are no longer automounted. |
| U32 automountLUN | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.4 | Unsigned32 | read-only | The logical unit number (LUN) of the disk to automount. This object is obsolete. Volumes are no longer automounted. |
| I32 automountNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.3.1 | Integer32 | read-only | The number of automounts configured. This object is obsolete. Volumes are no longer automounted. |
| U32 automountPartitionIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.2 | Unsigned32 | read-only | The partition number of the disk to automount. This object is obsolete. Volumes are no longer automounted. |
| automountTable | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2 | not-accessible | A table containing the automount configuration. The number of entries in this table is given by the value of automountNumber. This object is obsolete. Volumes are no longer automounted. | |
| STR automountWWN | 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.3 | DisplayString | read-only | The world wide name (WWN) of the disk to automount. This object is obsolete. Volumes are no longer automounted. |
| backup | 1.3.6.1.4.1.11096.6.1.1.4 | |||
| blueArc | 1.3.6.1.4.1.11096 | |||
| blueArcPrivate | 1.3.6.1.4.1.11096.6 | |||
| blueArcServer | 1.3.6.1.4.1.11096.6.1 | The MIB module for monitoring a BlueArc Server. | ||
| blueArcServerObjs | 1.3.6.1.4.1.11096.6.1.1 | |||
| cache | 1.3.6.1.4.1.11096.6.1.1.1.2.4 | |||
| cacheStats | 1.3.6.1.4.1.11096.6.1.1.6.5 | |||
| U32 chkpthCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.16 | Unsigned32 | read-only | The total number of 'Chkpth' CIFS calls received since power up. |
| cifs | 1.3.6.1.4.1.11096.6.1.1.3.2 | |||
| U32 cifsChkpthCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.15 | Unsigned32 | read-only | The total number of 'Chkpth' CIFS calls received since power up. |
| U32 cifsClients | 1.3.6.1.4.1.11096.6.1.1.3.2.3.1 | Unsigned32 | read-only | The total number of CIFS clients since power up. |
| U32 cifsCloseCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.6 | Unsigned32 | read-only | The total number of 'Close' CIFS calls received since power up. |
| U32 cifsCreateCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.5 | Unsigned32 | read-only | The total number of 'Create' CIFS calls received since power up. |
| U32 cifsDskattrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.33 | Unsigned32 | read-only | The total number of 'Dskattr' CIFS calls received since power up. |
| U32 cifsEchoCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.21 | Unsigned32 | read-only | The total number of 'Echo' CIFS calls received since power up. |
| U32 cifsFindCloseCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.27 | Unsigned32 | read-only | The total number of 'FindClose' CIFS calls received since power up. |
| U32 cifsFlushCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.7 | Unsigned32 | read-only | The total number of 'Flush' CIFS calls received since power up. |
| U32 cifsGetatrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.10 | Unsigned32 | read-only | The total number of 'Getatr' CIFS calls received since power up. |
| U32 cifsLockingXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.19 | Unsigned32 | read-only | The total number of 'LockingX' CIFS calls received since power up. |
| U32 cifsLseekCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.16 | Unsigned32 | read-only | The total number of 'Lseek' CIFS calls received since power up. |
| U32 cifsMkdirCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.2 | Unsigned32 | read-only | The total number of 'Mkdir' CIFS calls received since power up. |
| U32 cifsMknewCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.14 | Unsigned32 | read-only | The total number of 'Mknew' CIFS calls received since power up. |
| U32 cifsNegProtCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.29 | Unsigned32 | read-only | The total number of 'NegProt' CIFS calls received since power up. |
| U32 cifsNTcancelCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.38 | Unsigned32 | read-only | The total number of 'NTcancel' CIFS calls received since power up. |
| U32 cifsNTcreateXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.37 | Unsigned32 | read-only | The total number of 'NTcreateX' CIFS calls received since power up. |
| U32 cifsNTtransCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.35 | Unsigned32 | read-only | The total number of 'NTtrans' CIFS calls received since power up. |
| U32 cifsNTtranssCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.36 | Unsigned32 | read-only | The total number of 'NTtranss' CIFS calls received since power up. |
| U32 cifsOpenCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.4 | Unsigned32 | read-only | The total number of 'Open' CIFS calls received since power up. |
| U32 cifsOpenXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.23 | Unsigned32 | read-only | The total number of 'OpenX' CIFS calls received since power up. |
| U32 cifsReadBrawCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.17 | Unsigned32 | read-only | The total number of 'ReadBraw' CIFS calls received since power up. |
| U32 cifsReadCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.12 | Unsigned32 | read-only | The total number of 'Read' CIFS calls received since power up. |
| U32 cifsReadXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.24 | Unsigned32 | read-only | The total number of 'ReadX' CIFS calls received since power up. |
| U32 cifsRenameCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.9 | Unsigned32 | read-only | The total number of 'Rename' CIFS calls received since power up. |
| U32 cifsRmdirCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.3 | Unsigned32 | read-only | The total number of 'Rmdir' CIFS calls received since power up. |
| U32 cifsSearchCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.34 | Unsigned32 | read-only | The total number of 'Search' CIFS calls received since power up. |
| cifsService | 1.3.6.1.4.1.11096.6.1.1.3.2.4 | |||
| INT cifsServiceEnabled | 1.3.6.1.4.1.11096.6.1.1.3.2.4.1 | INTEGER | read-only | Indicates whether the CIFS service is enabled or not. |
| U32 cifsServiceMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.2.4.2 | Unsigned32 | read-only | The maximum number of CIFS users the service will allow. |
| U32 cifsSessSetupXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.30 | Unsigned32 | read-only | The total number of 'SessSetupX' CIFS calls received since power up. |
| U32 cifsSetatrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.11 | Unsigned32 | read-only | The total number of 'Setatr' CIFS calls received since power up. |
| STR cifsShareComment | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.4 | DisplayString | read-only | An optional comment assigned by the creator of the CIFS share to assist in identifying it. NOTE: This will be a zero length string if the creator has not assigned a comment to it. |
| cifsShareEntry | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1 | not-accessible | CIFS share information. | |
| I32 cifsShareEvsId | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.1 | Integer32 | read-only | The ID of the Enterprise Virtual Server to which this share belongs. |
| I32 cifsShareMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.6 | Integer32 | read-only | The maximum number of users which are permitted access to the CIFS share simultaneously. NOTE: this value is set to -1 if the maximum number of simultaneous users is unlimited. |
| STR cifsShareName | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.2 | DisplayString | read-only | The name of the CIFS share. Each share has a name unique to the EVS to which it belongs. |
| STR cifsSharePath | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.3 | DisplayString | read-only | The path to the CIFS share. |
| I32 cifsShareSpanId | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.7 | Integer32 | read-only | The ID of the volume the CIFS share is associated with. |
| cifsShareTable | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3 | not-accessible | A table containing the CIFS share configuration for the system. The number of entries in this table is given by the value of shareNumber. | |
| U32 cifsShareUsers | 1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.5 | Unsigned32 | read-only | The number of users currently accessing the CIFS share. |
| cifsStats | 1.3.6.1.4.1.11096.6.1.1.3.2.3 | |||
| U32 cifsStatsClusterNode | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.1 | Unsigned32 | read-only | The Cluster Node for this value. |
| cifsStatsEntry | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1 | not-accessible | The statistics for the CIFS service. | |
| cifsStatsTable | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39 | not-accessible | The statistics for the CIFS service. The number of entries in this table is given by the value of cifsStatsClusterNode. | |
| U32 cifsTconXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.32 | Unsigned32 | read-only | The total number of 'TconX' CIFS calls received since power up. |
| U32 cifsTdisCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.28 | Unsigned32 | read-only | The total number of 'Tdis' CIFS calls received since power up. |
| U32 cifsTrans2Calls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.26 | Unsigned32 | read-only | The total number of 'Trans2' CIFS calls received since power up. |
| U32 cifsTransCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.20 | Unsigned32 | read-only | The total number of 'Trans' CIFS calls received since power up. |
| U32 cifsUlogoffXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.31 | Unsigned32 | read-only | The total number of 'UlogoffX' CIFS calls received since power up. |
| U32 cifsUnlinkCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.8 | Unsigned32 | read-only | The total number of 'Unlink' CIFS calls received since power up. |
| U32 cifsWriteBrawCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.18 | Unsigned32 | read-only | The total number of 'WriteBraw' CIFS calls received since power up. |
| U32 cifsWriteCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.13 | Unsigned32 | read-only | The total number of 'Write' CIFS calls received since power up. |
| U32 cifsWriteCloseCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.22 | Unsigned32 | read-only | The total number of 'WriteClose' CIFS calls received since power up. |
| U32 cifsWriteXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.25 | Unsigned32 | read-only | The total number of 'WriteX' CIFS calls received since power up. |
| U32 clients | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.2 | Unsigned32 | read-only | The total number of CIFS clients since power up. |
| U32 closeCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.7 | Unsigned32 | read-only | The total number of 'Close' CIFS calls received since power up. |
| INT clusterConfig | 1.3.6.1.4.1.11096.6.1.1.1.2.5.3 | INTEGER | read-only | The configuration of the cluster: 1 - single standalone node 2 - active / standby pair 3 - active / active cluster 4 - the configuration could not be determined. |
| clustering | 1.3.6.1.4.1.11096.6.1.1.1.2.5 | |||
| STR clusterName | 1.3.6.1.4.1.11096.6.1.1.1.2.5.1 | DisplayString | read-only | The cluster management name. |
| I32 clusterNode | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.3 | Integer32 | read-only | The identification number of the cluster node hosting this component. A value of -1 indicates that this cannot be determined. |
| U32 clusterNodeId | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.1 | Unsigned32 | read-only | The ID of the cluster node for which these pool statistics are reported. |
| U32 clusterNodeStatsCnId | 1.3.6.1.4.1.11096.6.1.1.6.7.4.1.1 | Unsigned32 | read-only | The cluster node for this value. |
| clusterNodeStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.7.4.1 | not-accessible | Count information of threads managing a network socket that are running. | |
| I32 clusterNodeStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.7.3 | Integer32 | read-only | Number of units that may be running a thread managing a network socket. |
| clusterNodeStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.7.4 | not-accessible | A table of the number of threads managing a network socket that are running. The number of entries in this table is given by the value of clusterNodeStatsNumber. | |
| clusterPNodeEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1 | not-accessible | Information about each physical node. | |
| I32 clusterPNodeId | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.1 | Integer32 | read-only | The identification number of the physical node. A value of -1 indicates that this cannot be determined. |
| IP clusterPNodeIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.3 | IpAddress | read-only | The IP address of the physical node. A value of 0.0.0.0 indicates that this cannot be determined. |
| STR clusterPNodeName | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.2 | DisplayString | read-only | The management name of the physical node. |
| I32 clusterPNodeNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.5.8 | Integer32 | read-only | The number of physical nodes in the cluster. A value of -1 indicates that this cannot be determined. |
| INT clusterPNodeStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.4 | INTEGER | read-only | The status of the physical node: 1 - unknown 2 - up 3 - not up 4 - on line 5 - dead 6 - dormant |
| clusterPNodeTable | 1.3.6.1.4.1.11096.6.1.1.1.2.5.9 | not-accessible | Information about each physical node in the cluster. The number of entries in this table is given by clusterPNodeNumber. | |
| IP clusterQuorumDeviceIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.5.5 | IpAddress | read-only | The quorum device IP address, or 0.0.0.0 if no quorum device is present. |
| STR clusterQuorumDeviceName | 1.3.6.1.4.1.11096.6.1.1.1.2.5.4 | DisplayString | read-only | The quorum device management name. |
| I32 clusterQuorumDeviceOwnedByPNode | 1.3.6.1.4.1.11096.6.1.1.1.2.5.6 | Integer32 | read-only | The identification number of the physical node which owns this quorum device. A value of -1 indicates that this cannot be determined. |
| INT clusterQuorumDeviceStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.5.7 | INTEGER | read-only | The status of the quorum device: 0 - unknown 1 - unconfigured 2 - off line 3 - owned 4 - configured 5 - granted 6 - cluster node being queried is not up 7 - quorum device does not have the correct UUID for the cluster |
| clusterStats | 1.3.6.1.4.1.11096.6.1.1.6.7 | |||
| STR clusterUuid | 1.3.6.1.4.1.11096.6.1.1.1.2.5.2 | DisplayString | read-only | A unique identification number for the cluster. |
| INT clusterVNodeAdmin | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.5 | INTEGER | read-only | Whether the virtual node is the administrative virtual node: 0 - a service node (i.e. not the administrative virtual node) 1 - the administrative virtual node 2 - cannot be determined |
| clusterVNodeEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1 | not-accessible | Information about each virtual node in the cluster. | |
| I32 clusterVNodeHostedBy | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.6 | Integer32 | read-only | The identification number of the physical node hosting this virtual node. A value of -1 indicates that this cannot be determined. |
| I32 clusterVNodeId | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.1 | Integer32 | read-only | The identification number of the virtual node. A value of -1 indicates that this cannot be determined. |
| IP clusterVNodeIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.3 | IpAddress | read-only | The IP address of the virtual node. A value of 0.0.0.0 indicates that this cannot be determined. |
| STR clusterVNodeName | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.2 | DisplayString | read-only | The management name of the virtual node. |
| I32 clusterVNodeNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.5.10 | Integer32 | read-only | The number of virtual nodes in the cluster. A value of -1 indicates that this cannot be determined. |
| INT clusterVNodeStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.4 | INTEGER | read-only | The status of the virtual node: 1 - unknown 2 - on line 3 - off line |
| clusterVNodeTable | 1.3.6.1.4.1.11096.6.1.1.1.2.5.11 | not-accessible | Information about each virtual node in the cluster. The number of entries in this table is given by clusterVNodeNumber | |
| C64 cnsRetransmits | 1.3.6.1.4.1.11096.6.1.1.6.7.2.1.3 | Counter64 | read-only | The number of retransmits of redirected CNS packets. If this value is not available for the server series, it will be reported as zero. |
| C32 commit3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.22 | Counter32 | read-only | The total number of 'Commit' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| INT componentType | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.1 | INTEGER | read-only | The type of component: 1 - a chassis 2 - a blade, such as NIM2 3 - a power supply unit |
| controllers | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1 | |||
| U32 cpuIndex | 1.3.6.1.4.1.11096.6.1.1.6.1.2.1.2 | Unsigned32 | read-only | CPU core index. |
| U32 cpuUtilization | 1.3.6.1.4.1.11096.6.1.1.6.1.2.1.3 | Unsigned32 | read-only | Current percentage usage of this CPU. |
| U32 cpuUtilizationCnIndex | 1.3.6.1.4.1.11096.6.1.1.6.1.2.1.1 | Unsigned32 | read-only | The cluster node for this value. |
| cpuUtilizationEntry | 1.3.6.1.4.1.11096.6.1.1.6.1.2.1 | not-accessible | Usage information for a CPU which may be present on this system. | |
| I32 cpuUtilizationNumber | 1.3.6.1.4.1.11096.6.1.1.6.1.1 | Integer32 | read-only | The number of CPUs which may be present on this system. |
| cpuUtilizationTable | 1.3.6.1.4.1.11096.6.1.1.6.1.2 | not-accessible | A table of usage information relevant to each CPU which may be present on this system. The number of entries in this table is given by the value of cpuUtilizationNumber. | |
| C32 create2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.10 | Counter32 | read-only | The total number of 'Create' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 create3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.9 | Counter32 | read-only | The total number of 'Create' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 createCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.6 | Unsigned32 | read-only | The total number of 'Create' CIFS calls received since power up. |
| cron | 1.3.6.1.4.1.11096.6.1.1.5.8 | |||
| STR cronJobAccessLevel | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1.5 | DisplayString | read-only | The access level at which the cron job is run. |
| STR cronJobCommandList | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1.3 | DisplayString | read-only | A semi-colon separated list of commands to be run as part of the cron job. |
| STR cronJobDateSpec | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1.2 | DisplayString | read-only | The date specification for the cron job. |
| cronJobEntry | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1 | not-accessible | Cron job information. | |
| I32 cronJobIndex | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1.1 | Integer32 | read-only | A unique value for each cron job entry. |
| STR cronJobMailList | 1.3.6.1.4.1.11096.6.1.1.5.8.2.1.4 | DisplayString | read-only | A semi-colon separated list of recipients who each are to receive a copy of the output generated as a result of running the cron job. NOTE: This value will be a zero length string if the output of running the job is not be emailed. |
| I32 cronJobNumber | 1.3.6.1.4.1.11096.6.1.1.5.8.1 | Integer32 | read-only | The number of cron jobs configured to run on this system. NOTE: this table also includes those cron jobs which are configured to perform snapshot scheduling. |
| cronJobTable | 1.3.6.1.4.1.11096.6.1.1.5.8.2 | not-accessible | A table containing a list of all cron jobs configured to run on this system. The number of entries in this table is given by the value of cronJobNumber. | |
| C64 cumNonZeroQueuedReadTime | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.3 | Counter64 | read-only | The cumulative time that queued reads have taken since this statistic was last reset in microseconds. |
| C64 cumNonZeroQueuedWriteTime | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.4 | Counter64 | read-only | The cumulative time that queued writes have taken since this statistic was last reset in microseconds. |
| INT daylightSavings | 1.3.6.1.4.1.11096.6.1.1.1.2.2.4 | INTEGER | read-only | Indicates whether daylight savings are in effect. |
| dns | 1.3.6.1.4.1.11096.6.1.1.2.6.2 | |||
| dnsSearchEntry | 1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1 | not-accessible | DNS search information. | |
| I32 dnsSearchIndex | 1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1.1 | Integer32 | read-only | A unique value for each configured DNS search string. This value defines the DNS search ordering. Its value ranges between 1 and the value of dnsSearchNumber. |
| I32 dnsSearchNumber | 1.3.6.1.4.1.11096.6.1.1.2.6.2.3 | Integer32 | read-only | The number of DNS search list entries which are configured for the system. |
| STR dnsSearchString | 1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1.2 | DisplayString | read-only | The DNS search string. |
| dnsSearchTable | 1.3.6.1.4.1.11096.6.1.1.2.6.2.4 | not-accessible | A table containing the DNS search list which is a list of domain suffices. The number of entries in this table is given by the value of dnsSearchNumber. | |
| dnsServerEntry | 1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1 | not-accessible | Information about the configured DNS server. | |
| I32 dnsServerIndex | 1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1.1 | Integer32 | read-only | A unique value for each configured DNS server. This value defines the DNS search ordering. Its value ranges between 1 and the value of dnsServerNumber. |
| IP dnsServerIpAddress | 1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1.2 | IpAddress | read-only | The IP address of the DNS server. |
| I32 dnsServerNumber | 1.3.6.1.4.1.11096.6.1.1.2.6.2.1 | Integer32 | read-only | The number of configured DNS servers. |
| dnsServerTable | 1.3.6.1.4.1.11096.6.1.1.2.6.2.2 | not-accessible | A table containing the IP addresses of each of the servers which have been configured as DNS servers for this system. The number of entries in this table is given by the value of dnsServerNumber. | |
| U32 dskattrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.34 | Unsigned32 | read-only | The total number of 'Dskattr' CIFS calls received since power up. |
| U32 echoCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.22 | Unsigned32 | read-only | The total number of 'Echo' CIFS calls received since power up. |
| I32 enclosureAlarmAlarmIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.3 | Integer32 | read-only | An identifier for the alarm module within the enclosure. Alarm module numbers start at 1. This object is now obsolete. |
| INT enclosureAlarmBeeping | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.5 | INTEGER | read-only | Indicates whether the alarm module is beeping or not. This object is now obsolete. |
| I32 enclosureAlarmEnclosureIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.2 | Integer32 | read-only | The enclosure in which the alarm module is located. Enclosure numbers start at 1. This object is now obsolete. |
| enclosureAlarmEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1 | not-accessible | Information about a alarm module within an enclosure. This object is now obsolete. | |
| I32 enclosureAlarmNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.7 | Integer32 | read-only | The total number of alarm modules which are present in all of the enclosures in all racks within the system. This object is now obsolete. |
| I32 enclosureAlarmRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.1 | Integer32 | read-only | The rack in which the alarm module is located. The alarm module identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT enclosureAlarmStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.4 | INTEGER | read-only | The operational status of alarm module. This object is now obsolete. |
| enclosureAlarmTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8 | not-accessible | A table containing status information on each alarm module located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureAlarmNumber. This object is now obsolete. | |
| U32 enclosureFanEnclosureIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.2 | Unsigned32 | read-only | The enclosure in which the fan is located. Enclosure numbers start at 1. This object is now obsolete. |
| enclosureFanEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1 | not-accessible | Fan status information. This object is now obsolete. | |
| U32 enclosureFanFanIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.3 | Unsigned32 | read-only | An identifier for the fan within the enclosure. Fan numbers start at 1. This object is now obsolete. |
| I32 enclosureFanNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.1 | Integer32 | read-only | The total number of fans which are present in all of the enclosures in all racks within the system. This object is now obsolete. |
| I32 enclosureFanRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.1 | Integer32 | read-only | The rack in which the fan is located. The fan identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT enclosureFanSpeed | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.5 | INTEGER | read-only | An indication of the speed at which the fan is running. This object is now obsolete. |
| INT enclosureFanStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.4 | INTEGER | read-only | The status of the fan sensor. This object is now obsolete. |
| enclosureFanTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2 | not-accessible | A table containing status information for each fan located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureFanNumber. This object is now obsolete. | |
| I32 enclosurePSUEnclosureIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.2 | Integer32 | read-only | The enclosure in which the power supply is located. Enclosure numbers start at 1. This object is now obsolete. |
| enclosurePSUEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1 | not-accessible | Information about a power supply within an enclosure. This object is now obsolete. | |
| I32 enclosurePSUNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.5 | Integer32 | read-only | The total number of power supplies which are present in all of the enclosures in all racks within the system. This object is now obsolete. |
| I32 enclosurePSUPSUIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.3 | Integer32 | read-only | An identifier for the power supply within the enclosure. Power supply numbers start at 1. This object is now obsolete. |
| I32 enclosurePSURackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.1 | Integer32 | read-only | The rack in which the power supply is located. The power supply identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT enclosurePSUStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.4 | INTEGER | read-only | The operational status of the power supply. This object is now obsolete. |
| enclosurePSUTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6 | not-accessible | A table containing status information on each power supply located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosurePSUNumber. This object is now obsolete. | |
| enclosures | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3 | |||
| I32 enclosureTemperatureEnclosureIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.2 | Integer32 | read-only | The enclosure in which the temperature sensor is located. Enclosure numbers start at 1. This object is now obsolete. |
| enclosureTemperatureEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1 | not-accessible | Information obtained from a temperature sensor located within an enclosure. This object is now obsolete. | |
| I32 enclosureTemperatureNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.3 | Integer32 | read-only | The total number of temperature sensors which are present in all of the enclosures in all racks within the system. This object is now obsolete. |
| INT enclosureTemperatureOverTemp | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.5 | INTEGER | read-only | A flag indicating whether an over temperature has been detected by the sensor. overTemp(1) - an over temperature has been detected. noOverTemp(2) - an over temperature has NOT been detected. This object is now obsolete. |
| I32 enclosureTemperatureRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.1 | Integer32 | read-only | The rack in which the temperature sensor is located. The sensor identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT enclosureTemperatureRange | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.8 | INTEGER | read-only | Status indicator of the temperature with regard to the operating temperatures expected within the enclosure. This object is now obsolete. |
| INT enclosureTemperatureStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.4 | INTEGER | read-only | The status of the temperature sensor. This object is now obsolete. |
| enclosureTemperatureTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4 | not-accessible | A table containing temperature readings for each sensor located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureTemperatureNumber. This object is now obsolete. | |
| I32 enclosureTemperatureTempC | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.6 | Integer32 | read-only | The temperature measured by the sensor in degrees Celsius. A value of -1 indicates the temperature could not be determined. This object is now obsolete. |
| I32 enclosureTemperatureTempF | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.7 | Integer32 | read-only | The temperature measured by the sensor in degrees Fahrenheit. A value of -1 indicates the temperature could not be determined. This object is now obsolete. |
| I32 enclosureTemperatureTempIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.3 | Integer32 | read-only | An identifier for the temperature sensor within the enclosure. Temperature sensor numbers start at 1. This object is now obsolete. |
| engipConfig | 1.3.6.1.4.1.11096.6.1.1.2.5 | |||
| environment | 1.3.6.1.4.1.11096.6.1.1.1.2.1 | |||
| C64 ethCRCErrs | 1.3.6.1.4.1.11096.6.1.1.2.1.8 | Counter64 | read-only | The number of cyclic redundancy code errors which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethernetCRCErrs | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.6 | Counter64 | read-only | The number of cyclic redundancy code errors which have occurred on the network interface. |
| C64 ethernetEvFIFOMaxEvents | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.12 | Counter64 | read-only | The maximum number of events in the event FIFO. |
| C64 ethernetInBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.17 | Counter64 | read-only | The number of bytes successfully received through the network interface. |
| C64 ethernetInEvFIFOPktDrop | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.11 | Counter64 | read-only | The number received packets dropped by the event FIFO. |
| C64 ethernetInFIFODrops | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.5 | Counter64 | read-only | The number of FIFO drops which have occurred on the network interface. |
| C64 ethernetInPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.14 | Counter64 | read-only | The number of packets successfully received through the network interface. |
| C32 ethernetInstInOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.1 | Counter32 | read-only | The instantaneous receive rate in bytes per second for data received through the network interface. |
| C32 ethernetInstOutOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.2 | Counter32 | read-only | The instantaneous transmission rate in bytes per second for data transmitted through the network interface. |
| C64 ethernetOutBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.16 | Counter64 | read-only | The number of bytes successfully transmitted through the network interface. |
| C64 ethernetOutFIFOUflows | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.7 | Counter64 | read-only | The number of transmit FIFO underflows which have occurred on the network interface. |
| C64 ethernetOutFifteenCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.10 | Counter64 | read-only | The number of more than fifteen collisions which have occurred on the network interface. |
| C64 ethernetOutOneCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.8 | Counter64 | read-only | The number of one collisions which have occurred on the network interface. |
| C64 ethernetOutPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.13 | Counter64 | read-only | The number of packets successfully transmitted through the network interface. |
| C64 ethernetOutTwoCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.9 | Counter64 | read-only | The number of two to fifteen collisions which have occurred on the network interface. |
| C32 ethernetPkInOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.3 | Counter32 | read-only | The peak receive rate in bytes per second for data received through the network interface. |
| C32 ethernetPkOutOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.4 | Counter32 | read-only | The peak transmission rate in bytes per second for data transmitted through the network interface. |
| ethernetStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1 | not-accessible | Statistics for ethernet interfaces. | |
| ethernetStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.2.1.21 | not-accessible | A table of statistics for ethernet interfaces. The number of entries in this table is given by the value of ifNumber. | |
| C64 ethernetTotalBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.18 | Counter64 | read-only | The total number of bytes successfully transmitted and received through the network interface. |
| C64 ethernetTotalPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.15 | Counter64 | read-only | The total number of packets successfully transmitted and received through the network interface. |
| etherStats | 1.3.6.1.4.1.11096.6.1.1.2.1 | |||
| C64 ethEvFIFOMaxEvents | 1.3.6.1.4.1.11096.6.1.1.2.1.14 | Counter64 | read-only | The maximum number of events in the event FIFO. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethInBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.19 | Counter64 | read-only | The number of bytes successfully received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethInEvFIFOPktDrop | 1.3.6.1.4.1.11096.6.1.1.2.1.13 | Counter64 | read-only | The number received packets dropped by the event FIFO. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethInFIFODrops | 1.3.6.1.4.1.11096.6.1.1.2.1.7 | Counter64 | read-only | The number of FIFO drops which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethInPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.16 | Counter64 | read-only | The number of packets successfully received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethInPkts | 1.3.6.1.4.1.11096.6.1.1.2.1.2 | Counter64 | read-only | The number of packets successfully received through the network interface. This object is obsolete. It has been grouped with other related statistics. |
| C32 ethInstInOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.3 | Counter32 | read-only | The instantaneous receive rate in bytes per second for data received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C32 ethInstOutOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.4 | Counter32 | read-only | The instantaneous transmission rate in bytes per second for data transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.18 | Counter64 | read-only | The number of bytes successfully transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutFIFOUflows | 1.3.6.1.4.1.11096.6.1.1.2.1.9 | Counter64 | read-only | The number of transmit FIFO underflows which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutFifteenCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.12 | Counter64 | read-only | The number of more than fifteen collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutOneCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.10 | Counter64 | read-only | The number of one collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.15 | Counter64 | read-only | The number of packets successfully transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethOutPkts | 1.3.6.1.4.1.11096.6.1.1.2.1.1 | Counter64 | read-only | The number of packets successfully transmitted through the network interface. This object is obsolete. It has been grouped with other related statistics. |
| C64 ethOutTwoCollision | 1.3.6.1.4.1.11096.6.1.1.2.1.11 | Counter64 | read-only | The number of two to fifteen collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C32 ethPkInOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.5 | Counter32 | read-only | The peak receive rate in bytes per second for data received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C32 ethPkOutOctetRate | 1.3.6.1.4.1.11096.6.1.1.2.1.6 | Counter32 | read-only | The peak transmission rate in bytes per second for data transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethTotalBytes | 1.3.6.1.4.1.11096.6.1.1.2.1.20 | Counter64 | read-only | The total number of bytes successfully transmitted and received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| C64 ethTotalPackets | 1.3.6.1.4.1.11096.6.1.1.2.1.17 | Counter64 | read-only | The total number of packets successfully transmitted and received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable. |
| eventlog | 1.3.6.1.4.1.11096.6.1.1.5.4 | |||
| eventLogEntry | 1.3.6.1.4.1.11096.6.1.1.5.4.2.1 | not-accessible | Event log information. This object is now obsolete. | |
| I32 eventLogHandle | 1.3.6.1.4.1.11096.6.1.1.5.4.2.1.2 | Integer32 | read-only | A unique handle for the event. This object is now obsolete. |
| I32 eventLogNumber | 1.3.6.1.4.1.11096.6.1.1.5.4.1 | Integer32 | read-only | The total number of events currently logged. This object is now obsolete. |
| eventLogTable | 1.3.6.1.4.1.11096.6.1.1.5.4.2 | not-accessible | A table containing a list of all Events logged for the system. The number of entries in this table is given by the value of eventLogNumber. This object is now obsolete. | |
| STR eventLogText | 1.3.6.1.4.1.11096.6.1.1.5.4.2.1.3 | DisplayString | read-only | The text describing the event. This object is now obsolete. |
| STR eventLogTimeStamp | 1.3.6.1.4.1.11096.6.1.1.5.4.2.1.1 | DisplayString | read-only | The timestamp of the event in UTC format. This object is now obsolete. |
| failover | 1.3.6.1.4.1.11096.6.1.1.1.2.3 | |||
| INT failoverConfigStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.3.1 | INTEGER | read-only | Indicates whether failover is configured for the silicon server. This object is obsolete. Failover has been replaced by clustering. |
| IP failoverPrimaryIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.3.5 | IpAddress | read-only | The primary IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| STR failoverPrimaryName | 1.3.6.1.4.1.11096.6.1.1.1.2.3.2 | DisplayString | read-only | The primary management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| INT failoverPrimaryStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.3.8 | INTEGER | read-only | The status of the primary. This object is obsolete. Failover has been replaced by clustering. |
| IP failoverSecondaryIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.3.7 | IpAddress | read-only | The secondary IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| STR failoverSecondaryName | 1.3.6.1.4.1.11096.6.1.1.1.2.3.4 | DisplayString | read-only | The secondary management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| INT failoverSecondaryStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.3.9 | INTEGER | read-only | The status of the secondary. This object is obsolete. Failover has been replaced by clustering. |
| IP failoverSystemIpAddr | 1.3.6.1.4.1.11096.6.1.1.1.2.3.6 | IpAddress | read-only | The system IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| STR failoverSystemName | 1.3.6.1.4.1.11096.6.1.1.1.2.3.3 | DisplayString | read-only | The system management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering. |
| I32 fanClusterNode | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.1 | Integer32 | read-only | The ID of the Cluster Node in which the fan is located. |
| fanEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1 | not-accessible | Information about each fan located in all silicon server units in the cluster. | |
| INT fanFittedStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.3 | INTEGER | read-only | Indicates the 'fitted' status of the fan. ok(1) - the fan is fitted correctly. okIdWrong(2) - the fan is fitted correctly, but the ID is wrong. notFitted(3) - the fan is not fitted. unknown(4) - the status could not be determined. |
| I32 fanIndex | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.2 | Integer32 | read-only | A unique value for each fan on a cluster node. |
| I32 fanNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.1.10 | Integer32 | read-only | The number of fans (regardless of their current state) present in all silicon server units in the cluster. |
| I32 fanSpeed | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.5 | Integer32 | read-only | The speed of the fan. |
| INT fanSpeedStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.4 | INTEGER | read-only | Indicates the 'speed' status of the fan. ok(1) - the fan speed is ok. warning(2) - the fan speed is at a warning level. severe(3) - the fan speed is at a severe level. unknown(4) - the fan speed status could not be determined. |
| fanTable | 1.3.6.1.4.1.11096.6.1.1.1.2.1.11 | not-accessible | A table containing information about the fans located in all silicon server units in the cluster. | |
| C32 fcBadCRCErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.12 | Counter32 | read-only | The number of framing errors due to bad cyclic redundancy codes, at a fibre channel interface. This object is now obsolete. |
| C32 fcBadCRCErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.19 | Counter32 | read-only | The total number of framing errors due to bad cyclic redundancy codes. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcBadRXCharErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.7 | Counter32 | read-only | The number of bad receive character errors at a fibre channel interface. This object is now obsolete. |
| C32 fcBadRXCharErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.14 | Counter32 | read-only | The total number of bad receive character errors. This object is obsolete. It forms a column in fcStatsTable. |
| C64 fcCacheHits | 1.3.6.1.4.1.11096.6.1.1.1.3.6.11 | Counter64 | read-only | The total number of disk read requests which were fulfilled through reading the sector cache (ie the requests did NOT require access to the disk). |
| C64 fcCacheMisses | 1.3.6.1.4.1.11096.6.1.1.1.3.6.12 | Counter64 | read-only | The total number disk read requests which required access to the disk (ie the requests could NOT be fulfilled through reading the sector cache). |
| C32 fcDiscardedFrameErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.11 | Counter32 | read-only | The number of discarded frame errors at a fibre channel interface. This object is now obsolete. |
| C32 fcDiscardedFrameErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.18 | Counter32 | read-only | The total number of discarded frame errors. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcInstantaneousInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.2 | Counter32 | read-only | The number of bytes received by a fibre channel interface in the last second. This object is now obsolete. |
| C32 fcInstantaneousOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.3 | Counter32 | read-only | The number of bytes transmitted by a fibre channel interface in the last second. This object is now obsolete. |
| C32 fcInstInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.7 | Counter32 | read-only | The instantaneous receive rate in bytes per second for data received through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcInstOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.8 | Counter32 | read-only | The instantaneous transmission rate in bytes per second for data transmitted through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable. |
| I32 fcInterfaceIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.1 | Integer32 | read-only | The index of the fibre channel interface to which the statistics in this row apply. This object is now obsolete. |
| C64 fcIOStatusFails | 1.3.6.1.4.1.11096.6.1.1.1.3.6.22 | Counter64 | read-only | The number of I/O requests that failed after resubmission. NOTE: This indicates a fatal error condition with the fibre channel interface hardware. |
| C64 fcIOStatusResubs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.21 | Counter64 | read-only | The number of I/O requests that were resubmitted because they failed the first time. |
| C32 fcLinkFailErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.9 | Counter32 | read-only | The number of link fail errors at a fibre channel interface. This object is now obsolete. |
| C32 fcLinkFailErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.16 | Counter32 | read-only | The total number of link fail errors. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcLossSignalErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.13 | Counter32 | read-only | The total number of loss of signal errors. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcLossSyncErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.8 | Counter32 | read-only | The number of loss of synchronisation errors at a fibre channel interface. This object is now obsolete. |
| C32 fcLossSyncErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.15 | Counter32 | read-only | The total number of loss of synchronisation errors. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcPeakInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.4 | Counter32 | read-only | The peak receive rate in bytes per second for data received through a fibre channel interface. This object is now obsolete. |
| C32 fcPeakOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.5 | Counter32 | read-only | The peak transmission rate in bytes per second for data transmitted through a fibre channel interface. |
| C32 fcPkInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.9 | Counter32 | read-only | The peak receive rate in bytes per second for data received through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcPkOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.10 | Counter32 | read-only | The peak transmission rate in bytes per second for data transmitted through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcProtErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.20 | Counter32 | read-only | The total number of fibre channel protocol errors. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcProtocolErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.13 | Counter32 | read-only | The number of fibre channel protocol errors at a fibre channel interface. This object is now obsolete. |
| C64 fcReadReqs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.3 | Counter64 | read-only | The total number of disk read requests issued through the fibre channel interface. |
| C64 fcReadResps | 1.3.6.1.4.1.11096.6.1.1.1.3.6.5 | Counter64 | read-only | The total number of disk read responses received through the fibre channel interface. |
| C64 fcRequestsEx | 1.3.6.1.4.1.11096.6.1.1.1.3.6.1 | Counter64 | read-only | The total number of requests issued through the fibre channel interface. |
| C64 fcResponses | 1.3.6.1.4.1.11096.6.1.1.1.3.6.2 | Counter64 | read-only | The total number of responses received through the fibre channel interface. |
| C32 fcRXEOFErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.10 | Counter32 | read-only | The number of messages received at a fibre channel interface from the frame sender indicating that the frame should be aborted because a problem occurred during transmission. This object is now obsolete. |
| C32 fcRXEOFErrs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.17 | Counter32 | read-only | The total number of messages received from the frame sender indicating that the frame should be aborted because a problem occurred during transmission. This object is obsolete. It forms a column in fcStatsTable. |
| C32 fcSignalLossErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.6 | Counter32 | read-only | The total number of loss of signal errors by a fibre channel interface. This object is now obsolete. |
| fcStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1 | not-accessible | A set of statistics for a fibre channel interface. The interface is indexed by fcInterfaceIndex. | |
| fcStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25 | not-accessible | A table of statistics for the fibre channel interfaces. | |
| fcStats | 1.3.6.1.4.1.11096.6.1.1.1.3.6 | |||
| C32 fcStatsBadCRCErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.19 | Counter32 | read-only | The number of framing errors due to bad cyclic redundancy codes, at a fibre channel interface. |
| C32 fcStatsBadRXCharErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.14 | Counter32 | read-only | The number of bad receive character errors at a fibre channel interface. |
| I32 fcStatsClusterNode | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.1 | Integer32 | read-only | The Cluster Node to which this row applies. |
| C32 fcStatsDiscardedFrameErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.18 | Counter32 | read-only | The number of discarded frame errors at a fibre channel interface. |
| fcStatsEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1 | not-accessible | A set of statistics for a fibre channel interface. The interface is indexed by fcInterfaceIndex. This object is now obsolete. | |
| C32 fcStatsInstantaneousInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.7 | Counter32 | read-only | The number of bytes received by a fibre channel interface in the last second. |
| C32 fcStatsInstantaneousOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.8 | Counter32 | read-only | The number of bytes transmitted by a fibre channel interface in the last second. |
| INT fcStatsInterfaceEnabled | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.3 | INTEGER | read-only | Whether the fibre interface is enabled or not. unknown(0) - the information could not be obtained. enabled(1) - the interface is enabled. disabled(2) - the interface is disabled. |
| I32 fcStatsInterfaceIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.2 | Integer32 | read-only | The index of the fibre channel interface to which the statistics in this row apply. |
| I32 fcStatsInterfaceLinkSpeed | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.5 | Integer32 | read-only | The speed of the fibre channel interface in Gbps. |
| INT fcStatsInterfaceLinkType | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.6 | INTEGER | read-only | The link-type of the fibre interface. unknown(0) - the information could not be obtained. n(1) - fabric direct attach. nl(2) - arbitrated loop operation. |
| INT fcStatsInterfaceStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.4 | INTEGER | read-only | The status of the fibre interface. unknown(0) - the information could not be obtained. up(1) - the interface is up. isolated(2) - the interface is isolated. down(3) - the interface is down. |
| C32 fcStatsLinkFailErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.16 | Counter32 | read-only | The number of link fail errors at a fibre channel interface. |
| C32 fcStatsLossSyncErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.15 | Counter32 | read-only | The number of loss of synchronisation errors at a fibre channel interface. |
| C32 fcStatsPeakInRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.9 | Counter32 | read-only | The peak receive rate in bytes per second for data received through a fibre channel interface. |
| C32 fcStatsPeakOutRate | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.10 | Counter32 | read-only | The peak transmission rate in bytes per second for data transmitted through a fibre channel interface. |
| C32 fcStatsProtocolErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.20 | Counter32 | read-only | The number of fibre channel protocol errors at a fibre channel interface. |
| C32 fcStatsRXEOFErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.17 | Counter32 | read-only | The number of messages received at a fibre channel interface from the frame sender indicating that the frame should be aborted because a problem occurred during transmission. |
| C32 fcStatsSignalLossErrors | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.13 | Counter32 | read-only | The total number of loss of signal errors by a fibre channel interface. |
| fcStatsTable | 1.3.6.1.4.1.11096.6.1.1.1.3.6.24 | not-accessible | A table of statistics for the fibre channel interfaces. This object is now obsolete. | |
| C64 fcStatsTotalRxBytes | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.11 | Counter64 | read-only | The total bytes received through a fibre channel interface. |
| C64 fcStatsTotalTxBytes | 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.12 | Counter64 | read-only | The total bytes transmitted through a fibre channel interface. |
| C64 fcWriteReqs | 1.3.6.1.4.1.11096.6.1.1.1.3.6.4 | Counter64 | read-only | The total number of disk write requests issued through the fibre channel interface. |
| C64 fcWriteResps | 1.3.6.1.4.1.11096.6.1.1.1.3.6.6 | Counter64 | read-only | The total number of disk write responses received through the fibre channel interface. |
| U32 fibreChannelInterfaceNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.6.23 | Unsigned32 | read-only | The number of fibre channel interfaces. |
| fileProtocol | 1.3.6.1.4.1.11096.6.1.1.3 | |||
| fileSysCache | 1.3.6.1.4.1.11096.6.1.1.1.2.4.2 | |||
| INT fileSysCacheMode | 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.1 | INTEGER | read-only | The mode the file system cache is currently operating in. This object is obsolete. |
| INT fileSysCacheTimeout | 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.3 | INTEGER | read-only | The file system cache timeout in seconds. This object is obsolete. |
| I32 fileSystemLoadClient | 1.3.6.1.4.1.11096.6.1.1.1.2.1.6 | Integer32 | read-only | The percentage of maximum load on file system resources due to client usage, averaged over the last 10 seconds. This represents the load on FSA. |
| I32 fileSystemLoadSystem | 1.3.6.1.4.1.11096.6.1.1.1.2.1.7 | Integer32 | read-only | The percentage of maximum load on file system resources due to system usage, averaged over the last 10 seconds. This represents the load on FSB. |
| fileSystemStats | 1.3.6.1.4.1.11096.6.1.1.6.3 | |||
| fileSystemStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1 | not-accessible | File system statistical information. | |
| I32 fileSystemStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.3.1 | Integer32 | read-only | The number of file systems for which statistics are available. |
| fileSystemStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.3.2 | not-accessible | Table of file system statistics entries | |
| I32 fileSystemTierStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.3.3 | Integer32 | read-only | The number of tiered file system for which statistics are available. |
| fileSystemTierStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.3.4 | not-accessible | Table of tiered file system statistics entries. | |
| INT fileSysTransactionLogging | 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.2 | INTEGER | read-only | Indicates whether file system transaction logging is enabled or not. This object is obsolete. |
| INT fileSysUpdateLastAccess | 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.4 | INTEGER | read-only | Indicates whether the file system should update the last access time(s) on files or not. |
| U32 findCloseCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.28 | Unsigned32 | read-only | The total number of 'FindClose' CIFS calls received since power up. |
| U32 flushCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.8 | Unsigned32 | read-only | The total number of 'Flush' CIFS calls received since power up. |
| U32 fpgaUtilization | 1.3.6.1.4.1.11096.6.1.1.6.1.4.1.4 | Unsigned32 | read-only | Current percentage usage averaged over the last second of this Field Programmable Gate Array. |
| U32 fpgaUtilizationCnIndex | 1.3.6.1.4.1.11096.6.1.1.6.1.4.1.1 | Unsigned32 | read-only | The cluster node for this value. |
| fpgaUtilizationEntry | 1.3.6.1.4.1.11096.6.1.1.6.1.4.1 | not-accessible | Usage information for a Field Programmable Gate Array which may be present on this system. | |
| U32 fpgaUtilizationFpgaIndex | 1.3.6.1.4.1.11096.6.1.1.6.1.4.1.2 | Unsigned32 | read-only | The index of the Field Programmable Gate Array for this value. |
| STR fpgaUtilizationFpgaName | 1.3.6.1.4.1.11096.6.1.1.6.1.4.1.3 | DisplayString | read-only | The name of the Field Programmable Gate Array for this value. |
| I32 fpgaUtilizationNumber | 1.3.6.1.4.1.11096.6.1.1.6.1.3 | Integer32 | read-only | The number of Field Programmable Gate Arrays (regardless of their current state) which may be present on this system. |
| fpgaUtilizationTable | 1.3.6.1.4.1.11096.6.1.1.6.1.4 | not-accessible | A table of usage information relevant to each Field Programmable Gate Array which may be present on this system. The number of entries in this table is given by the value of fpgaUtilizationNumber. | |
| U32 fsCapacitySnapshotLower | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.8 | Unsigned32 | read-only | The low order 32-bits representing the file system's used space that is allocated to snapshots in bytes. (see also fsCapacitySnapshotUpper) |
| U32 fsCapacitySnapshotUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.7 | Unsigned32 | read-only | The high order 32-bits representing the file system's used space that is allocated to snapshots in bytes. (see also fsCapacitySnapshotLower) |
| U32 fsCapacityTotalLower | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.4 | Unsigned32 | read-only | The low order 32-bits representing the file system's capacity in bytes. (see also fsCapacityTotalUpper) |
| U32 fsCapacityTotalUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.3 | Unsigned32 | read-only | The high order 32-bits representing the file system's capacity in bytes. (see also fsCapacityTotalLower) |
| U32 fsCapacityUsedLower | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.6 | Unsigned32 | read-only | The low order 32-bits representing the file system's used space in bytes. (see also fsCapacityUsedUpper) |
| U32 fsCapacityUsedUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.5 | Unsigned32 | read-only | The high order 32-bits representing the file system's used space in bytes. (see also fsCapacityUsedLower) |
| U32 fsId | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.1 | Unsigned32 | read-only | The id of the Span hosting the volume with which the NVRAM is associated. |
| C32 fsInfo3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.20 | Counter32 | read-only | The total number of 'FSInfo' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| STR fsLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.2 | DisplayString | read-only | The label of the FileSystem for which these statistics are reported. |
| C32 fsNvramWaitedAllocs | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.9 | Counter32 | read-only | The number of waited allocations for nvram that have caused a delay to a file system operation. |
| C64 fsPermId | 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.1 | Counter64 | read-only | The permanent ID of the FileSystem for which these statistics are reported. |
| C32 fsStat3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.19 | Counter32 | read-only | The total number of 'FSStat' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| fsStatsEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1 | not-accessible | Statistics on a FileSystem. | |
| I32 fsStatsFsId | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.1 | Integer32 | read-only | The device identifier for this file system. |
| STR fsStatsFsLabel | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.2 | DisplayString | read-only | The label for the file system. |
| fsStatsTable | 1.3.6.1.4.1.11096.6.1.1.1.3.5.3 | not-accessible | A table containing statistics about each FileSystem known to the system. The number of entries in this table is given by the value of volumeNumber. | |
| U32 fsTier | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.2 | Unsigned32 | read-only | The tier type of this entry. |
| U32 fsTierCapacitySnapshotLower | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.9 | Unsigned32 | read-only | The low order 32-bits representing the file system's used space that is allocated to snapshots in this tier in bytes. (see also fsCapacitySnapshotUpper) |
| U32 fsTierCapacitySnapshotUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.8 | Unsigned32 | read-only | The high order 32-bits representing the file system's used space that is allocated to snapshots in this tier in bytes. (see also fsCapacitySnapshotLower) |
| U32 fsTierCapacityTotalLower | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.5 | Unsigned32 | read-only | The low order 32-bits representing the file system's capacity in this tier in bytes. (see also fsCapacityTotalUpper) |
| U32 fsTierCapacityTotalUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.4 | Unsigned32 | read-only | The high order 32-bits representing the file system's capacity in this tier in bytes. (see also fsCapacityTotalLower) |
| U32 fsTierCapacityUsedLower | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.7 | Unsigned32 | read-only | The low order 32-bits representing the file system's used space in this tier in bytes. (see also fsCapacityUsedUpper) |
| U32 fsTierCapacityUsedUpper | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.6 | Unsigned32 | read-only | The high order 32-bits representing the file system's used space in this tier in bytes. (see also fsCapacityUsedLower) |
| fsTierStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1 | not-accessible | Tiered file system statistical information. | |
| I32 fsTierStatsFsId | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.1 | Integer32 | read-only | The permanent identifier for this file system. |
| STR fsTierStatsFsLabel | 1.3.6.1.4.1.11096.6.1.1.6.3.4.1.3 | DisplayString | read-only | The label for the file system. |
| U32 fsWriteSmoothing | 1.3.6.1.4.1.11096.6.1.1.6.3.2.1.10 | Unsigned32 | read-only | The number of times the file system had to wait for write smoothing. |
| ftp | 1.3.6.1.4.1.11096.6.1.1.3.4 | |||
| STR ftpAuditLogDirectory | 1.3.6.1.4.1.11096.6.1.1.3.4.4.5 | DisplayString | read-only | The directory the FTP server is to write the audit log to. This object is obsolete. |
| INT ftpAuditLogging | 1.3.6.1.4.1.11096.6.1.1.3.4.4.1 | INTEGER | read-only | Indicates whether FTP Audit logging is enabled or not. This object is obsolete. |
| U32 ftpAuditLogRecordsPerFile | 1.3.6.1.4.1.11096.6.1.1.3.4.4.6 | Unsigned32 | read-only | The number of records in each audit log file. This object is obsolete. |
| U32 ftpAuditLogVolumeLUN | 1.3.6.1.4.1.11096.6.1.1.3.4.4.3 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the FTP server is to write the audit log to. This object is obsolete. |
| U32 ftpAuditLogVolumePartitionID | 1.3.6.1.4.1.11096.6.1.1.3.4.4.4 | Unsigned32 | read-only | The partition ID of the volume the FTP server is to write the audit log to. This object is obsolete. |
| STR ftpAuditLogVolumeWWN | 1.3.6.1.4.1.11096.6.1.1.3.4.4.2 | DisplayString | read-only | The world wide name (WWN) of the system drive the FTP server is to write the audit log to. This object is obsolete. |
| U32 ftpAuditMaximumLogFiles | 1.3.6.1.4.1.11096.6.1.1.3.4.4.7 | Unsigned32 | read-only | The maximum number of audit log files. This object is obsolete. |
| C64 ftpBytesTotalXferIn | 1.3.6.1.4.1.11096.6.1.1.3.4.5.3 | Counter64 | read-only | The total number of data bytes transferred in since power up. This object is obsolete. |
| C64 ftpBytesTotalXferOut | 1.3.6.1.4.1.11096.6.1.1.3.4.5.5 | Counter64 | read-only | The total number of data bytes transferred out since power up. This object is obsolete. |
| ftpLogging | 1.3.6.1.4.1.11096.6.1.1.3.4.4 | |||
| ftpMountEntry | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1 | not-accessible | FTP mount point information. This object is obsolete. | |
| U32 ftpMountLUN | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.4 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the FTP mount point is associated with. This object is obsolete. |
| STR ftpMountName | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.1 | DisplayString | read-only | The name of the FTP mount point. Each FTP mount point has a unique name. This object is obsolete. |
| I32 ftpMountNumber | 1.3.6.1.4.1.11096.6.1.1.3.4.2.1 | Integer32 | read-only | The number of FTP mount points which are configured for the system. This object is obsolete. |
| U32 ftpMountNumberUsers | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.2 | Unsigned32 | read-only | The number of users of the FTP mount point. This object is obsolete. |
| U32 ftpMountPartitionID | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.5 | Unsigned32 | read-only | The partition ID of the volume the FTP mount point is associated with. This object is obsolete. |
| ftpMountPoints | 1.3.6.1.4.1.11096.6.1.1.3.4.2 | |||
| ftpMountTable | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2 | not-accessible | A table containing the FTP mount point configuration for the system. The number of entries in this table is given by the value of ftpMountNumber. This object is obsolete. | |
| STR ftpMountWWN | 1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.3 | DisplayString | read-only | The world wide name (WWN) of the system drive the FTP mount point is associated with. This object is obsolete. |
| INT ftpNISPasswordEnabled | 1.3.6.1.4.1.11096.6.1.1.3.4.7.2 | INTEGER | read-only | Indicates whether FTP uses NIS password authentication or not. This object is obsolete. |
| INT ftpNTPasswordEnabled | 1.3.6.1.4.1.11096.6.1.1.3.4.7.1 | INTEGER | read-only | Indicates whether FTP uses NT password authentication or not. This object is obsolete. |
| ftpSecurity | 1.3.6.1.4.1.11096.6.1.1.3.4.7 | |||
| ftpService | 1.3.6.1.4.1.11096.6.1.1.3.4.6 | |||
| INT ftpServiceEnabled | 1.3.6.1.4.1.11096.6.1.1.3.4.6.1 | INTEGER | read-only | Indicates whether the FTP service is enabled or not. This object is obsolete. |
| U32 ftpServiceMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.4.6.2 | Unsigned32 | read-only | The maximum number of FTP users the service will allow. This object is obsolete. |
| ftpStats | 1.3.6.1.4.1.11096.6.1.1.3.4.5 | |||
| I32 ftpTimeout | 1.3.6.1.4.1.11096.6.1.1.3.4.1 | Integer32 | read-only | The FTP session timeout in minutes. NOTE: this value applies to all FTP sessions. This object is obsolete. |
| C64 ftpTotalBytesCommands | 1.3.6.1.4.1.11096.6.1.1.3.4.5.8 | Counter64 | read-only | The total number of bytes received in commands since power up. This object is obsolete. |
| C64 ftpTotalBytesReplies | 1.3.6.1.4.1.11096.6.1.1.3.4.5.9 | Counter64 | read-only | The total number of bytes set in replies since power up. This object is obsolete. |
| C32 ftpTotalFtpCommands | 1.3.6.1.4.1.11096.6.1.1.3.4.5.6 | Counter32 | read-only | The total number of commands issued from clients since power up. This object is obsolete. |
| C32 ftpTotalFtpReplies | 1.3.6.1.4.1.11096.6.1.1.3.4.5.7 | Counter32 | read-only | The total number of replies sent to clients since power up. This object is obsolete. |
| C32 ftpTotalFtpXferIn | 1.3.6.1.4.1.11096.6.1.1.3.4.5.2 | Counter32 | read-only | The total number of data transfers (files) in since power up. This object is obsolete. |
| C32 ftpTotalFtpXferOut | 1.3.6.1.4.1.11096.6.1.1.3.4.5.4 | Counter32 | read-only | The total number of data transfers (files) out since power up. This object is obsolete. |
| C32 ftpTotalSess | 1.3.6.1.4.1.11096.6.1.1.3.4.5.1 | Counter32 | read-only | The total number of FTP sessions since power up. This object is obsolete. |
| ftpUserEntry | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1 | not-accessible | FTP user information. This object is obsolete. | |
| STR ftpUserMountInitDirectory | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.4 | DisplayString | read-only | The FTP users initial directory. This object is obsolete. |
| STR ftpUserMountPoint | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.3 | DisplayString | read-only | The name of the FTP users mount point. This object is obsolete. |
| INT ftpUserMountPointExists | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.2 | INTEGER | read-only | Indicates whether the FTP mount point is configured in the ftpMountTable. This object is obsolete. |
| STR ftpUserName | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.1 | DisplayString | read-only | The name of the FTP user. This object is obsolete. |
| I32 ftpUserNumber | 1.3.6.1.4.1.11096.6.1.1.3.4.3.1 | Integer32 | read-only | The number of FTP users which are configured for the system. This object is obsolete. |
| ftpUsers | 1.3.6.1.4.1.11096.6.1.1.3.4.3 | |||
| ftpUserTable | 1.3.6.1.4.1.11096.6.1.1.3.4.3.2 | not-accessible | A table containing the FTP user configuration for the system. The number of entries in this table is given by the value of ftpUserNumber. This object is obsolete. | |
| U32 getatrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.11 | Unsigned32 | read-only | The total number of 'Getatr' CIFS calls received since power up. |
| C32 getAttr2Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.2 | Counter32 | read-only | The total number of 'GetAttr' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 getAttr3Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.2 | Counter32 | read-only | The total number of 'GetAttr' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| http | 1.3.6.1.4.1.11096.6.1.1.3.5 | |||
| U32 httpActiveConnections | 1.3.6.1.4.1.11096.6.1.1.3.5.2.22 | Unsigned32 | read-only | The number of active HTTP connections. This object is now obsolete as no HTTP server is present. |
| C64 httpBytesXferIn | 1.3.6.1.4.1.11096.6.1.1.3.5.2.4 | Counter64 | read-only | The number of bytes received by the server. This object is now obsolete as no HTTP server is present. |
| C64 httpBytesXferOut | 1.3.6.1.4.1.11096.6.1.1.3.5.2.3 | Counter64 | read-only | The number of bytes sent by the server. This includes output HTTP headers. This object is now obsolete as no HTTP server is present. |
| httpConfig | 1.3.6.1.4.1.11096.6.1.1.3.5.1 | |||
| C64 httpConnsAccepted | 1.3.6.1.4.1.11096.6.1.1.3.5.2.1 | Counter64 | read-only | The number of TCP/IP connections that clients have made to the server. Clients running HTTP/1.1 can make multiple requests per connection, and so this number will typically be lower that the total number of requests. This object is now obsolete as no HTTP server is present. |
| C64 httpConnsRefused | 1.3.6.1.4.1.11096.6.1.1.3.5.2.2 | Counter64 | read-only | The total number of connections that were rejected with a '503 Service Unavailable' message. This object is now obsolete as no HTTP server is present. |
| U32 httpDecrTimeOut | 1.3.6.1.4.1.11096.6.1.1.3.5.1.8 | Unsigned32 | read-only | The time the HTTP server uses to decrement the timeout on client connection in milliseconds. This object is now obsolete as no HTTP server is present. |
| C64 httpGetRequests | 1.3.6.1.4.1.11096.6.1.1.3.5.2.5 | Counter64 | read-only | The number of GET requests received. This object is now obsolete as no HTTP server is present. |
| C64 httpHeadRequests | 1.3.6.1.4.1.11096.6.1.1.3.5.2.6 | Counter64 | read-only | The number of HEAD requests received. This object is now obsolete as no HTTP server is present. |
| U32 httpHostVolumeLUN | 1.3.6.1.4.1.11096.6.1.1.3.5.1.2 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the HTTP server is hosting. This object is now obsolete as no HTTP server is present. |
| U32 httpHostVolumePartitionID | 1.3.6.1.4.1.11096.6.1.1.3.5.1.3 | Unsigned32 | read-only | The partition ID of the volume the HTTP server is hosting. This object is now obsolete as no HTTP server is present. |
| STR httpHostVolumeWWN | 1.3.6.1.4.1.11096.6.1.1.3.5.1.1 | DisplayString | read-only | The world wide name (WWN) of the system drive the HTTP server is hosting. This object is now obsolete as no HTTP server is present. |
| U32 httpIncrTimeOut | 1.3.6.1.4.1.11096.6.1.1.3.5.1.9 | Unsigned32 | read-only | The time the HTTP server uses to increment the timeout on a valid incoming request. This object is now obsolete as no HTTP server is present. |
| INT httpListDirectories | 1.3.6.1.4.1.11096.6.1.1.3.5.1.11 | INTEGER | read-only | Indicates whether the HTTP server list directories option is enabled or not. This object is now obsolete as no HTTP server is present. |
| STR httpLogDirectory | 1.3.6.1.4.1.11096.6.1.1.3.5.1.17 | DisplayString | read-only | The name of the directory the HTTP server is logging to. This object is now obsolete as no HTTP server is present. |
| INT httpLogging | 1.3.6.1.4.1.11096.6.1.1.3.5.1.12 | INTEGER | read-only | Indicates whether HTTP server logging is enabled or not. This object is now obsolete as no HTTP server is present. |
| U32 httpLogRecordsPerFile | 1.3.6.1.4.1.11096.6.1.1.3.5.1.18 | Unsigned32 | read-only | The number of records per log file the HTTP server will generate during logging. This object is now obsolete as no HTTP server is present. |
| U32 httpLogVolumeLUN | 1.3.6.1.4.1.11096.6.1.1.3.5.1.15 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the HTTP server is logging to. This object is now obsolete as no HTTP server is present. |
| U32 httpLogVolumePartitionID | 1.3.6.1.4.1.11096.6.1.1.3.5.1.16 | Unsigned32 | read-only | The partition ID of the volume the HTTP server is logging to. This object is now obsolete as no HTTP server is present. |
| STR httpLogVolumeWWN | 1.3.6.1.4.1.11096.6.1.1.3.5.1.14 | DisplayString | read-only | The world wide name (WWN) of the system drive the HTTP server is logging to. This object is now obsolete as no HTTP server is present. |
| U32 httpMaxConnections | 1.3.6.1.4.1.11096.6.1.1.3.5.1.10 | Unsigned32 | read-only | The maximum number of connections allowed by the HTTP server. This object is now obsolete as no HTTP server is present. |
| INT httpMaximalLogging | 1.3.6.1.4.1.11096.6.1.1.3.5.1.13 | INTEGER | read-only | Indicates whether maximal logging is enabled or not for the HTTP server. This object is now obsolete as no HTTP server is present. |
| U32 httpMaximumLogFiles | 1.3.6.1.4.1.11096.6.1.1.3.5.1.19 | Unsigned32 | read-only | The maximum number of log files the HTTP server will generate during logging. This object is now obsolete as no HTTP server is present. |
| U32 httpMaxTimeOut | 1.3.6.1.4.1.11096.6.1.1.3.5.1.7 | Unsigned32 | read-only | The maximum timeout used by the HTTP server in milliseconds. This object is now obsolete as no HTTP server is present. |
| httpMimeMapEntry | 1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1 | not-accessible | Mime map information. This object is now obsolete as no HTTP server is present. | |
| STR httpMimeMapExtension | 1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.2 | DisplayString | read-only | The extension on the file. This object is now obsolete as no HTTP server is present. |
| I32 httpMimeMapIndex | 1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.1 | Integer32 | read-only | A unique value for each mime map configured for the HTTP server in this system. Its value ranges between 1 and the value of httpMimeMapNumber. This object is now obsolete as no HTTP server is present. |
| I32 httpMimeMapNumber | 1.3.6.1.4.1.11096.6.1.1.3.5.1.20 | Integer32 | read-only | The number of mime map entries configured for the HTTP server. This object is now obsolete as no HTTP server is present. |
| httpMimeMapTable | 1.3.6.1.4.1.11096.6.1.1.3.5.1.21 | not-accessible | A table containing the mime map configuration for the HTTP server in the system. The number of entries in this table is given by the value of httpMimeMapNumber. This object is now obsolete as no HTTP server is present. | |
| STR httpMimeMapType | 1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.3 | DisplayString | read-only | The corresponding type the extension maps to. This object is now obsolete as no HTTP server is present. |
| U32 httpMinTimeOut | 1.3.6.1.4.1.11096.6.1.1.3.5.1.6 | Unsigned32 | read-only | The minimum timeout used by the HTTP server in milliseconds. This object is now obsolete as no HTTP server is present. |
| U32 httpOpenConnections | 1.3.6.1.4.1.11096.6.1.1.3.5.2.21 | Unsigned32 | read-only | The number of open HTTP connections. This object is now obsolete as no HTTP server is present. |
| C64 httpPostRequests | 1.3.6.1.4.1.11096.6.1.1.3.5.2.8 | Counter64 | read-only | The number of POST requests received. This object is now obsolete as no HTTP server is present. |
| STR httpProduct | 1.3.6.1.4.1.11096.6.1.1.3.5.1.5 | DisplayString | read-only | The product string used by the HTTP server. This object is now obsolete as no HTTP server is present. |
| C64 httpPutRequests | 1.3.6.1.4.1.11096.6.1.1.3.5.2.7 | Counter64 | read-only | The number of PUT requests received. This object is now obsolete as no HTTP server is present. |
| STR httpRoot | 1.3.6.1.4.1.11096.6.1.1.3.5.1.4 | DisplayString | read-only | The root directory the HTTP server is hosting. This object is now obsolete as no HTTP server is present. |
| httpService | 1.3.6.1.4.1.11096.6.1.1.3.5.3 | |||
| INT httpServiceEnabled | 1.3.6.1.4.1.11096.6.1.1.3.5.3.1 | INTEGER | read-only | Indicates whether the HTTP service is enabled or not. This object is now obsolete as no HTTP server is present. |
| U32 httpServiceMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.5.3.2 | Unsigned32 | read-only | The maximum number of HTTP clients the service will allow. This object is now obsolete as no HTTP server is present. |
| httpStats | 1.3.6.1.4.1.11096.6.1.1.3.5.2 | |||
| C64 httpStatusBadRequest | 1.3.6.1.4.1.11096.6.1.1.3.5.2.12 | Counter64 | read-only | The number of 400 Bad Request status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusForbidden | 1.3.6.1.4.1.11096.6.1.1.3.5.2.13 | Counter64 | read-only | The number of 403 Forbidden status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusNotFound | 1.3.6.1.4.1.11096.6.1.1.3.5.2.14 | Counter64 | read-only | The number of 404 Not Found status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusNotImplemented | 1.3.6.1.4.1.11096.6.1.1.3.5.2.17 | Counter64 | read-only | The number of 501 Not Implemented status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusNotModified | 1.3.6.1.4.1.11096.6.1.1.3.5.2.10 | Counter64 | read-only | The number of 304 Not Modified status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusOK | 1.3.6.1.4.1.11096.6.1.1.3.5.2.9 | Counter64 | read-only | The number of 200 OK status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusOtherErr | 1.3.6.1.4.1.11096.6.1.1.3.5.2.19 | Counter64 | read-only | The number of other errors occurring. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusPreconFailed | 1.3.6.1.4.1.11096.6.1.1.3.5.2.11 | Counter64 | read-only | The number of 412 Precondition Failed status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusServerError | 1.3.6.1.4.1.11096.6.1.1.3.5.2.16 | Counter64 | read-only | The number of 500 Server Error status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusServiceUnavailable | 1.3.6.1.4.1.11096.6.1.1.3.5.2.18 | Counter64 | read-only | The number of 503 Service Unavailable status replies. This object is now obsolete as no HTTP server is present. |
| C64 httpStatusURITooLong | 1.3.6.1.4.1.11096.6.1.1.3.5.2.15 | Counter64 | read-only | The number of 414 URI Too Long status replies. This object is now obsolete as no HTTP server is present. |
| U32 httpTimeOut | 1.3.6.1.4.1.11096.6.1.1.3.5.2.20 | Unsigned32 | read-only | The timeout period in milliseconds. This object is now obsolete as no HTTP server is present. |
| INT hwFlowConsole | 1.3.6.1.4.1.11096.6.1.1.5.10.2.1.3 | INTEGER | read-only | Indicates whether hardware flow control is enabled on the console port (port number 1) on this board. This object is now obsolete, as Hardware Flow is only for use by developers. |
| hwFlowControl | 1.3.6.1.4.1.11096.6.1.1.5.10 | |||
| INT hwFlowDebug | 1.3.6.1.4.1.11096.6.1.1.5.10.2.1.2 | INTEGER | read-only | Indicates whether hardware flow control is enabled on the debug port (port number 0) on this board. This object is now obsolete, as Hardware Flow is only for use by developers. |
| hwFlowEntry | 1.3.6.1.4.1.11096.6.1.1.5.10.2.1 | not-accessible | Hardware flow control setting information. This object is now obsolete, as Hardware Flow is only for use by developers. | |
| INT hwFlowIndex | 1.3.6.1.4.1.11096.6.1.1.5.10.2.1.1 | INTEGER | read-only | An identifier for each board. tcp(1) - the tcp board. fsb(2) - the filesystem board. fcp(3) - the fibre channel board. This object is now obsolete, as Hardware Flow is only for use by developers. |
| I32 hwFlowNumber | 1.3.6.1.4.1.11096.6.1.1.5.10.1 | Integer32 | read-only | The number of boards which permit hardware flow control. This object is now obsolete, as Hardware Flow is only for use by developers. |
| hwFlowTable | 1.3.6.1.4.1.11096.6.1.1.5.10.2 | not-accessible | A table containing the hardware flow control settings for the boards within this system. The number of entries in this table is given by the value of hwFlowNumber. This object is now obsolete, as Hardware Flow is only for use by developers. | |
| intraClusterPortErrorEntry | 1.3.6.1.4.1.11096.6.1.1.6.7.2.1 | not-accessible | Network errors between nodes in a cluster. | |
| I32 intraClusterPortErrorNumber | 1.3.6.1.4.1.11096.6.1.1.6.7.1 | Integer32 | read-only | The number of cluster network errors in the table. |
| intraClusterPortErrorTable | 1.3.6.1.4.1.11096.6.1.1.6.7.2 | not-accessible | A table of network errors between nodes in a cluster. | |
| U32 intraClusterPortErrsCnId | 1.3.6.1.4.1.11096.6.1.1.6.7.2.1.1 | Unsigned32 | read-only | The ID of a cluster node for which intra-cluster errors are recorded. |
| iScsi | 1.3.6.1.4.1.11096.6.1.1.3.6 | |||
| iScsiConfiguration | 1.3.6.1.4.1.11096.6.1.1.3.6.1 | |||
| STR iScsiGloballyUniqueName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.1 | DisplayString | read-only | A unique name for the iSCSI target. |
| iScsiLogicalUnitEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1 | not-accessible | iSCSI Logical Unit information. Indexed by EVS and Logical Unit name. | |
| I32 iScsiLogicalUnitNumber | 1.3.6.1.4.1.11096.6.1.1.3.6.1.5 | Integer32 | read-only | The number of iSCSI logical units. |
| iScsiLogicalUnitTable | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6 | not-accessible | A table containing a list of iSCSI Logical Units. The number of entries in this table is given by the value of iScsiTargetLogicalUnitNumber in iScsiTargetTable. | |
| STR iScsiLUComment | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.4 | DisplayString | read-only | The comment relating to the Logical Unit. |
| U32 iScsiLUDeviceId | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.5 | Unsigned32 | read-only | The ID of the File System to which the Logical Unit is assigned. |
| U32 iScsiLUEvs | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.1 | Unsigned32 | read-only | The EVS to which the Logical Unit is assigned. |
| INT iScsiLUInitialized | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.7 | INTEGER | read-only | Whether the Logical Unit is initialized. initialized(1) - the Logical Unit is initialized uninitialized(2) - the Logical unit is not initialized unknown(3) - the initialization status cannot be determined. |
| STR iScsiLUName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.2 | DisplayString | read-only | The name of the Logical Unit. |
| STR iScsiLUPath | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.6 | DisplayString | read-only | The path on the File System relating to the Logical Unit. |
| C64 iScsiLUSize | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.8 | Counter64 | read-only | The size, in bytes, of the Logical Unit. |
| INT iScsiLUStatus | 1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.3 | INTEGER | read-only | The status of the Logical Unit unknown(1) - the status cannot be determined. |
| iScsiParameterEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1 | not-accessible | iSCSI parameter information. | |
| U32 iScsiParameterEVS | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.1 | Unsigned32 | read-only | The EVS for which the Logical Unit parameters are configured. |
| INT iScsiParameterIsBoolean | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.3 | INTEGER | read-only | Whether the parameter is a boolean value. If the parameter is boolean, it will have either the value 0 (false) or 1 (true). |
| STR iScsiParameterName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.2 | DisplayString | read-only | A unique name for the iSCSI parameter. |
| iScsiParameterTable | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2 | not-accessible | A table containing a list of iSCSI parameters. | |
| U32 iScsiParameterValue | 1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.4 | Unsigned32 | read-only | The value for the parameter. If the parameter is boolean, it will have either the value 0 (false) or 1 (true). |
| INT iScsiServiceEnabled | 1.3.6.1.4.1.11096.6.1.1.3.6.1.1 | INTEGER | read-only | Indicates whether the iSCSI service is enabled or not. enabled(1) The service is enabled disabled(2) The service is not enabled unknown(3) The service status cannot be determined. |
| iScsiStatistics | 1.3.6.1.4.1.11096.6.1.1.3.6.2 | |||
| iScsiStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1 | not-accessible | Information about iSCSI statistics. Indexed by Cluster Node id and metric name. | |
| STR iScsiStatisticsName | 1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.2 | DisplayString | read-only | The name of the value being reported. |
| U32 iScsiStatisticsNodeId | 1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.1 | Unsigned32 | read-only | The Cluster Node for this value. |
| iScsiStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.3.6.2.1 | not-accessible | A table containing a list of iSCSI statistics. | |
| C64 iScsiStatisticsValue | 1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.3 | Counter64 | read-only | The statistics value reported. |
| INT iScsiTargetAuthEnabled | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.5 | INTEGER | read-only | Whether authentication is enabled for this target. |
| STR iScsiTargetComment | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.3 | DisplayString | read-only | The comment for the iSCSI target. |
| iScsiTargetEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1 | not-accessible | iSCSI target information. | |
| iScsiTargetLogicalUnitEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1 | not-accessible | Information about iSCSI Logical Units assigned to iScsi targets. Indexed by target name and Logical Unit name. | |
| U32 iScsiTargetLogicalUnitNumber | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.4 | Unsigned32 | read-only | The number of Logical Units assigned to the iSCSI target. |
| iScsiTargetLogicalUnitTable | 1.3.6.1.4.1.11096.6.1.1.3.6.1.7 | not-accessible | A table containing a list of iSCSI Logical Units assigned to iSCSI targets. The number of entries in this table is given by the value of iScsiTargetLogicalUnitNumber in iScsiTargetTable. | |
| STR iScsiTargetLULogicalUnitName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.2 | DisplayString | read-only | The name of the Logical Unit assigned to the target. |
| I32 iScsiTargetLun | 1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.3 | Integer32 | read-only | The Logical Unit Number allocated to the LUN when it was assigned to the target. This is an arbitrary number which must be unique on the target. |
| STR iScsiTargetLUTargetName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.1 | DisplayString | read-only | The globally unique name of the target. |
| STR iScsiTargetName | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.2 | DisplayString | read-only | The name of the iSCSI target. |
| I32 iScsiTargetNumber | 1.3.6.1.4.1.11096.6.1.1.3.6.1.3 | Integer32 | read-only | The number of iSCSI targets. |
| iScsiTargetTable | 1.3.6.1.4.1.11096.6.1.1.3.6.1.4 | not-accessible | A table containing a list of iSCSI targets. The number of entries in this table is given by the value of iScsiTargetNumber. | |
| iSNSEntry | 1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1 | not-accessible | Information about iSNS servers. | |
| IP iSNSIpAddress | 1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1.1 | IpAddress | read-only | The IP address of the iSNS server. |
| U32 iSNSPort | 1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1.2 | Unsigned32 | read-only | The port on which to connect to the iSNS server. |
| iSNSTable | 1.3.6.1.4.1.11096.6.1.1.3.6.1.8 | not-accessible | A table containing details of iSNS servers. | |
| lcd | 1.3.6.1.4.1.11096.6.1.1.5.3.5 | |||
| INT lcdFrontPanelLocked | 1.3.6.1.4.1.11096.6.1.1.5.3.5.1 | INTEGER | read-only | Indicates whether the front panel LCD on the server is locked or not. This object is obsolete. |
| license | 1.3.6.1.4.1.11096.6.1.1.5.2 | |||
| INT licenseCIFSService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.4 | INTEGER | read-only | Indicates whether this license key enables the use of the CIFS service or not. |
| licenseEntry | 1.3.6.1.4.1.11096.6.1.1.5.2.3.1 | not-accessible | License information. | |
| INT licenseFailoverService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.8 | INTEGER | read-only | Indicates whether this license key enables the use of the Failover service or not. This object is obsolete: failover has been superceded by clustering. |
| INT licenseFTPService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.6 | INTEGER | read-only | Indicates whether this license key enables the use of the FTP service or not. |
| INT licenseHTTPService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.7 | INTEGER | read-only | Indicates whether this license key enables the use of the HTTP service or not. |
| I32 licenseIndex | 1.3.6.1.4.1.11096.6.1.1.5.2.3.1.1 | Integer32 | read-only | A unique value for each licensed service. |
| STR licenseKey | 1.3.6.1.4.1.11096.6.1.1.5.2.3.1.2 | DisplayString | read-only | The license key. |
| licenseKeyEntry | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1 | not-accessible | License key information. | |
| I32 licenseKeyIndex | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.1 | Integer32 | read-only | A unique value for each license key. Its value ranges between 1 and the value of licenseKeyNumber. |
| I32 licenseKeyNumber | 1.3.6.1.4.1.11096.6.1.1.5.2.1 | Integer32 | read-only | The number of license keys for this server. |
| STR licenseKeyString | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.2 | DisplayString | read-only | The license key string. |
| licenseKeyTable | 1.3.6.1.4.1.11096.6.1.1.5.2.2 | not-accessible | A table containing a list of license keys. The number of entries in this table is given by the value of licenseKeyNumber. | |
| INT licenseKeyValid | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.3 | INTEGER | read-only | Indicates whether the license key is valid on this server or not. |
| INT licenseNFSService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.5 | INTEGER | read-only | Indicates whether this license key enables the use of the NFS service or not. |
| INT licenseRAIDService | 1.3.6.1.4.1.11096.6.1.1.5.2.2.1.9 | INTEGER | read-only | Indicates whether this license key enables the use of more than one RAID controller in the system or not. |
| STR licenseService | 1.3.6.1.4.1.11096.6.1.1.5.2.3.1.3 | DisplayString | read-only | A service licensed by the given license. |
| licenseTable | 1.3.6.1.4.1.11096.6.1.1.5.2.3 | not-accessible | A table containing a list of valid license keys and the service(s) they license. | |
| C32 link2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.13 | Counter32 | read-only | The total number of 'Link' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 link3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.16 | Counter32 | read-only | The total number of 'Link' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| locale | 1.3.6.1.4.1.11096.6.1.1.1.2.2 | |||
| U32 lockingXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.20 | Unsigned32 | read-only | The total number of 'LockingX' CIFS calls received since power up. |
| C32 lookup2Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.5 | Counter32 | read-only | The total number of 'Lookup' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 lookup3Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.4 | Counter32 | read-only | The total number of 'Lookup' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 lseekCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.17 | Unsigned32 | read-only | The total number of 'Lseek' CIFS calls received since power up. |
| mailAlertConfig | 1.3.6.1.4.1.11096.6.1.1.5.5.1 | |||
| memberListEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1 | not-accessible | Information about a member list item. This object has been obsolete. | |
| I32 memberListIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.4 | Integer32 | read-only | An identifier for this member list entry. This identifier ranges from 1 to the number of member list items configured for the parent virtual volume. This object has been obsolete. |
| I32 memberListNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.7.3 | Integer32 | read-only | The number of member list entries for all virtual volumes which are accessible. This object has been obsolete. |
| STR memberListPath | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.5 | DisplayString | read-only | The path the member list item is associated with. This object has been obsolete. |
| INT memberListStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.6 | INTEGER | read-only | This status of the member list item. This object has been obsolete. |
| memberListTable | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4 | not-accessible | A table containing information about each member list item. The number of entries in this table is given by the value of memberListNumber.. This object has been obsolete. | |
| STR memberListVirtualVolumeLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.3 | DisplayString | read-only | The label of the parent virtual volume of this member list item. This object has been obsolete. |
| U32 memberListVolumePartitionID | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.2 | Unsigned32 | read-only | The partition ID of the parent volume of this virtual volume and member list item. The memberListVolumeSysDriveIndex and this value may be used to index the volumeTable in order to establish the parent volume. This object has been obsolete. |
| I32 memberListVolumeSysDriveIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.1 | Integer32 | read-only | The parent system drive of the virtual volume and member list item. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex. This object has been obsolete. |
| INT metaDataCache | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1.2 | INTEGER | read-only | Enumerated identity of the chip to which these stats pertain. |
| metaDataCacheStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1 | not-accessible | Metadata cache statistical information. Metadata cache statistics are provided for the following vlsi chipset: wfile, wdir, wtree, obj, fsa. | |
| I32 metaDataCacheStatsFsId | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1.1 | Integer32 | read-only | The unique device Id for this file system. |
| STR metaDataCacheStatsFsLabel | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1.3 | DisplayString | read-only | The file system label. |
| C32 metaDataCacheStatsHits | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1.4 | Counter32 | read-only | The number of cache hits experienced with this metadata cache. |
| C32 metaDataCacheStatsMisses | 1.3.6.1.4.1.11096.6.1.1.6.5.2.1.5 | Counter32 | read-only | The number of cache misses experienced with this metadata cache. |
| I32 metaDataCacheStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.5.1 | Integer32 | read-only | The number of metadata caches for which statistics are available. |
| metaDataCacheStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.5.2 | not-accessible | Table of metadata cache statistics entries | |
| mgmnt | 1.3.6.1.4.1.11096.6.1.1.5 | |||
| mgmntStats | 1.3.6.1.4.1.11096.6.1.1.5.9 | |||
| C64 mirroringRetransmits | 1.3.6.1.4.1.11096.6.1.1.6.7.2.1.2 | Counter64 | read-only | The number of retransmits of NVRAM mirroring packets. If this value is not available for the server series, it will be reported as zero. |
| C32 mkDir2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.15 | Counter32 | read-only | The total number of 'MkDir' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 mkdir3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.10 | Counter32 | read-only | The total number of 'MkDir' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 mkdirCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.3 | Unsigned32 | read-only | The total number of 'Mkdir' CIFS calls received since power up. |
| U32 mknewCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.15 | Unsigned32 | read-only | The total number of 'Mknew' CIFS calls received since power up. |
| C32 mkNod3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.12 | Counter32 | read-only | The total number of 'MkNod' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| nameService | 1.3.6.1.4.1.11096.6.1.1.2.6 | |||
| nameServiceEntry | 1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1 | not-accessible | Information about the name service. | |
| I32 nameServiceNumber | 1.3.6.1.4.1.11096.6.1.1.2.6.3.1 | Integer32 | read-only | The number of name services configured to be used for hostname lookups. |
| I32 nameServiceOrder | 1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1.1 | Integer32 | read-only | The order in which the lookup is made. Its value ranges between 1 and the value of nameServiceNumber. |
| nameServiceTable | 1.3.6.1.4.1.11096.6.1.1.2.6.3.2 | not-accessible | A table containing the name services which have been configured for hostname lookups. The number of entries in this table is given by the value of nameServiceNumber. | |
| INT nameServiceType | 1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1.2 | INTEGER | read-only | Indicates the configured service type. dns(1) - domain name service. wins(2) - the windows service. nis(3) - network information service. |
| INT ndmpAutoSnapCreateEnabled | 1.3.6.1.4.1.11096.6.1.1.4.3.1 | INTEGER | read-only | Determines whether snapshots are automatically created when NDMP performs a backup. enabled(1) - indicates that NDMP will create a snapshot (if one does not already exist) when a backup is to be performed. disabled(2) - indicates that NDMP will not automatically create a snapshot when a backup is to be performed. It will take a backup of the live file system if no snapshot exists. unknown(3) - indicates that snapshot is disabled on this system and the value is therefore unknown. |
| INT ndmpAutoSnapDeleteMode | 1.3.6.1.4.1.11096.6.1.1.4.3.2 | INTEGER | read-only | Indicates whether NDMP will remove a snapshot automatically when the backup is complete. immediately(1) - indicates that the snapshot will be deleted immediately after use. whenObsolete(2) - indicates that the snapshot will be deleted when it becomes obsolete. unknown(3) - indicates that snapshot is disabled on this system and the value is therefore unknown. |
| U32 ndmpAutoSnapMaxRetention | 1.3.6.1.4.1.11096.6.1.1.4.3.3 | Unsigned32 | read-only | The maximum retention time of snapshot (in days) which has been automatically created by NDMP as a result of performing a backup. NOTE: this value is set to 0 if snapshot is disabled on this system. |
| INT ndmpCurrentStatus | 1.3.6.1.4.1.11096.6.1.1.4.1.1 | INTEGER | read-only | Indicates the current status of the NDMP backup. |
| ndmpDevices | 1.3.6.1.4.1.11096.6.1.1.4.2 | |||
| INT ndmpEnabledOnBoot | 1.3.6.1.4.1.11096.6.1.1.4.1.2 | INTEGER | read-only | Indicates whether or not NDMP is enabled at boot time. |
| ndmpSnapshotOptions | 1.3.6.1.4.1.11096.6.1.1.4.3 | |||
| ndmpStatus | 1.3.6.1.4.1.11096.6.1.1.4.1 | |||
| U32 negProtCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.30 | Unsigned32 | read-only | The total number of 'NegProt' CIFS calls received since power up. |
| network | 1.3.6.1.4.1.11096.6.1.1.2 | |||
| nfs | 1.3.6.1.4.1.11096.6.1.1.3.3 | |||
| C32 nfsClients | 1.3.6.1.4.1.11096.6.1.1.3.3.6.4 | Counter32 | read-only | The total number of NFS clients since power up. This object is obsolete. It could not be measured. |
| nfsExportEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1 | not-accessible | NFS export information. | |
| I32 nfsExportIndex | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.1 | Integer32 | read-only | A unique value for each NFS export configuration in this system. Its value ranges between 1 and the value of nfsExportNumber. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| U32 nfsExportLUN | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.6 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the NFS export is associated with. This now has no meaning and is set to zero. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| STR nfsExportName | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.2 | DisplayString | read-only | The name of the NFS export. Each export has a unique name. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| I32 nfsExportNumber | 1.3.6.1.4.1.11096.6.1.1.3.3.1.1 | Integer32 | read-only | The number of NFS exports which are configured for the system. |
| U32 nfsExportNumberMounts | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.4 | Unsigned32 | read-only | The number of mounts of the NFS export. This object is obsolete. It could not be measured. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| U32 nfsExportPartitionID | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.7 | Unsigned32 | read-only | The partition ID of the volume the NFS export is associated with. This now has no meaning and is set to zero. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| STR nfsExportPath | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.3 | DisplayString | read-only | The path to the NFS export. |
| nfsExports | 1.3.6.1.4.1.11096.6.1.1.3.3.1 | |||
| U32 nfsExportsDeviceId | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.4 | Unsigned32 | read-only | The device ID of the volume the NFS export is associated with. |
| nfsExportsEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1 | not-accessible | NFS export information. | |
| U32 nfsExportsEvs | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.1 | Unsigned32 | read-only | The ID of the EVS the NFS export is associated with. |
| STR nfsExportsName | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.2 | DisplayString | read-only | The name of the NFS export. Each export has a unique name. |
| STR nfsExportsPath | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.3 | DisplayString | read-only | The path to the NFS export. |
| nfsExportsTable | 1.3.6.1.4.1.11096.6.1.1.3.3.1.3 | not-accessible | A table containing the NFS export configuration for the system. The number of entries in this table is given by the value of nfsExportNumber. | |
| nfsExportTable | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2 | not-accessible | A table containing the NFS export configuration for the system. The number of entries in this table is given by the value of nfsExportNumber. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. | |
| STR nfsExportWWN | 1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.5 | DisplayString | read-only | The world wide name (WWN) of the system drive the NFS export is associated with. This object is now obsolete, and is re-implemented as a table indexed by EVS and name. |
| nfsGroupEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1 | not-accessible | NFS group information. | |
| U32 nfsGroupID | 1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1.2 | Unsigned32 | read-only | The ID of the UNIX group. |
| nfsGroupMapping | 1.3.6.1.4.1.11096.6.1.1.3.3.5 | |||
| nfsGroupMappingEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1 | not-accessible | NFS to NT group mapping information. | |
| STR nfsGroupMappingNtGroupDomainName | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.5 | DisplayString | read-only | The NT domain name for which the mapping exists. |
| STR nfsGroupMappingNtGroupName | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.4 | DisplayString | read-only | The name of the NT group for which the mapping exists. |
| I32 nfsGroupMappingNumber | 1.3.6.1.4.1.11096.6.1.1.3.3.5.1 | Integer32 | read-only | The number of NFS to NT group mappings which are configured for the system. |
| nfsGroupMappingTable | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2 | not-accessible | A table containing the NFS to NT group mapping configuration for the system. The number of entries in this table is given by the value of nfsGroupMappingNumber. | |
| U32 nfsGroupMappingUnixGroupID | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.3 | Unsigned32 | read-only | The UNIX group ID. |
| INT nfsGroupMappingUnixGroupIDValid | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.2 | INTEGER | read-only | Indicates whether the UNIX group ID is configured user in the nfsGroupTable. |
| STR nfsGroupMappingUnixGroupName | 1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.1 | DisplayString | read-only | The name of the UNIX group for which the mapping exists. |
| STR nfsGroupName | 1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1.1 | DisplayString | read-only | The name of the UNIX group. |
| I32 nfsGroupNumber | 1.3.6.1.4.1.11096.6.1.1.3.3.4.1 | Integer32 | read-only | The number of NFS groups configured for the system. |
| nfsGroups | 1.3.6.1.4.1.11096.6.1.1.3.3.4 | |||
| nfsGroupTable | 1.3.6.1.4.1.11096.6.1.1.3.3.4.2 | not-accessible | A table containing the NFS group configuration for the system. The number of entries in this table is given by the value of nfsGroupNumber. | |
| C32 nfsMounts | 1.3.6.1.4.1.11096.6.1.1.3.3.6.3 | Counter32 | read-only | The total number of NFS mounts since power up. This object is obsolete. It could not be measured. |
| nfsService | 1.3.6.1.4.1.11096.6.1.1.3.3.7 | |||
| INT nfsServiceEnabled | 1.3.6.1.4.1.11096.6.1.1.3.3.7.1 | INTEGER | read-only | Indicates whether the NFS service is enabled or not. |
| U32 nfsServiceMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.3.7.2 | Unsigned32 | read-only | The maximum number of NFS users the service will allow. |
| nfsStats | 1.3.6.1.4.1.11096.6.1.1.3.3.6 | |||
| nfsUserEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1 | not-accessible | NFS user information. | |
| U32 nfsUserID | 1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1.2 | Unsigned32 | read-only | The ID of the UNIX user. |
| nfsUserMapping | 1.3.6.1.4.1.11096.6.1.1.3.3.3 | |||
| nfsUserMappingEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1 | not-accessible | NFS to NT user mapping information. | |
| STR nfsUserMappingNtUserDomainName | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.5 | DisplayString | read-only | The NT domain name for which the mapping exists. |
| STR nfsUserMappingNtUserName | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.4 | DisplayString | read-only | The name of the NT user for which the mapping exists. |
| I32 nfsUserMappingNumber | 1.3.6.1.4.1.11096.6.1.1.3.3.3.1 | Integer32 | read-only | The number of NFS to NT user mappings which are configured for the system. |
| nfsUserMappingTable | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2 | not-accessible | A table containing the NFS to NT user mapping configuration for the system. The number of entries in this table is given by the value of nfsUserMappingNumber. | |
| U32 nfsUserMappingUnixUserID | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.3 | Unsigned32 | read-only | The UNIX user ID. |
| INT nfsUserMappingUnixUserIDValid | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.2 | INTEGER | read-only | Indicates whether the UNIX user ID is configured user in the nfsUserTable. |
| STR nfsUserMappingUnixUserName | 1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.1 | DisplayString | read-only | The name of the UNIX user for which the mapping exists. |
| STR nfsUserName | 1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1.1 | DisplayString | read-only | The name of the UNIX user. |
| I32 nfsUserNumber | 1.3.6.1.4.1.11096.6.1.1.3.3.2.1 | Integer32 | read-only | The number of NFS users which are configured for the system. |
| nfsUsers | 1.3.6.1.4.1.11096.6.1.1.3.3.2 | |||
| nfsUserTable | 1.3.6.1.4.1.11096.6.1.1.3.3.2.2 | not-accessible | A table containing the NFS user configuration for the system. The number of entries in this table is given by the value of nfsUserNumber. | |
| C32 nfsV2create | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.11 | Counter32 | read-only | The total number of 'Create' calls received for NFS version 2 since power up. |
| C32 nfsV2getAttrCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.3 | Counter32 | read-only | The total number of 'GetAttr' calls received for NFS version 2 since power up. |
| C32 nfsV2link | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.14 | Counter32 | read-only | The total number of 'Link' calls received for NFS version 2 since power up. |
| C32 nfsV2lookupCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.6 | Counter32 | read-only | The total number of 'Lookup' calls received for NFS version 2 since power up. |
| C32 nfsV2mkDir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.16 | Counter32 | read-only | The total number of 'MkDir' calls received for NFS version 2 since power up. |
| C32 nfsV2nullCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.2 | Counter32 | read-only | The total number of 'Null' calls received for NFS version 2 since power up. |
| C32 nfsV2read | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.8 | Counter32 | read-only | The total number of 'Read' calls received for NFS version 2 since power up. |
| C32 nfsV2readDir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.18 | Counter32 | read-only | The total number of 'ReadDir' calls received for NFS version 2 since power up. |
| C32 nfsV2readLink | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.7 | Counter32 | read-only | The total number of 'ReadLink' calls received for NFS version 2 since power up. |
| C32 nfsV2remove | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.12 | Counter32 | read-only | The total number of 'Remove' calls received for NFS version 2 since power up. |
| C32 nfsV2rename | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.13 | Counter32 | read-only | The total number of 'Rename' calls received for NFS version 2 since power up. |
| C32 nfsV2rmDir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.17 | Counter32 | read-only | The total number of 'RmDir' calls received for NFS version 2 since power up. |
| C32 nfsV2rootCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.5 | Counter32 | read-only | The total number of 'Root' calls received since power up NOTE: this variable is not used/implemented. |
| C32 nfsV2setAttrCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.4 | Counter32 | read-only | The total number of 'SetAttr' calls received for NFS version 2 since power up. |
| C32 nfsV2statFS | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.19 | Counter32 | read-only | The total number of 'StatFS' calls received for NFS version 2 since power up. |
| U32 nfsV2StatsClusterNode | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.1 | Unsigned32 | read-only | The Cluster Node for this value. |
| nfsV2StatsEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1 | not-accessible | The statistics for the NFS version 2 service. | |
| nfsV2StatsTable | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19 | not-accessible | The statistics for the NFS version 2 service. The number of entries in this table is given by the value of clusterPNodeNumber. | |
| C32 nfsV2symLink | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.15 | Counter32 | read-only | The total number of 'Sym Link' calls received for NFS version 2 since power up. |
| C32 nfsV2write | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.10 | Counter32 | read-only | The total number of 'Write' calls received for NFS version 2 since power up. |
| C32 nfsV2writeCache | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.9 | Counter32 | read-only | The total number of 'Write Cache' calls received since power up. NOTE : this variable is not used/implemented. |
| C32 nfsV3accessCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.6 | Counter32 | read-only | The total number of 'Access' calls received for NFS version 3 since power up. |
| C32 nfsV3commit | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.23 | Counter32 | read-only | The total number of 'Commit' calls received for NFS version 3 since power up. |
| C32 nfsV3create | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.10 | Counter32 | read-only | The total number of 'Create' calls received for NFS version 3 since power up. |
| C32 nfsV3fsInfo | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.21 | Counter32 | read-only | The total number of 'FSInfo' calls received for NFS version 3 since power up. |
| C32 nfsV3fsStat | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.20 | Counter32 | read-only | The total number of 'FSStat' calls received for NFS version 3 since power up. |
| C32 nfsV3getAttrCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.3 | Counter32 | read-only | The total number of 'GetAttr' calls received for NFS version 3 since power up. |
| C32 nfsV3link | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.17 | Counter32 | read-only | The total number of 'Link' calls received for NFS version 3 since power up. |
| C32 nfsV3lookupCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.5 | Counter32 | read-only | The total number of 'Lookup' calls received for NFS version 3 since power up. |
| C32 nfsV3mkdir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.11 | Counter32 | read-only | The total number of 'MkDir' calls received for NFS version 3 since power up. |
| C32 nfsV3mkNod | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.13 | Counter32 | read-only | The total number of 'MkNod' calls received for NFS version 3 since power up. |
| C32 nfsV3nullCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.2 | Counter32 | read-only | The total number of 'Null' calls received for NFS version 3 since power up. |
| C32 nfsV3pathConf | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.22 | Counter32 | read-only | The total number of 'PathConf' calls received for NFS version 3 since power up. |
| C32 nfsV3read | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.8 | Counter32 | read-only | The total number of 'Read' calls received for NFS version 3 since power up. |
| C32 nfsV3readDir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.18 | Counter32 | read-only | The total number of 'ReadDir' calls received for NFS version 3 since power up. |
| C32 nfsV3readDirPlus | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.19 | Counter32 | read-only | The total number of 'ReadDirPlus' calls received for NFS version 3 since power up. |
| C32 nfsV3readLink | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.7 | Counter32 | read-only | The total number of 'ReadLink' calls received for NFS version 3 since power up. |
| C32 nfsV3remove | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.14 | Counter32 | read-only | The total number of 'Remove' calls received for NFS version 3 since power up. |
| C32 nfsV3rename | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.16 | Counter32 | read-only | The total number of 'Rename' calls received for NFS version 3 since power up. |
| C32 nfsV3rmDir | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.15 | Counter32 | read-only | The total number of 'RmDir' calls received for NFS version 3 since power up. |
| C32 nfsV3setAttrCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.4 | Counter32 | read-only | The total number of 'SetAttr' calls received for NFS version 3 since power up. |
| U32 nfsV3StatsClusterNode | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.1 | Unsigned32 | read-only | The Cluster Node for this value. |
| nfsV3StatsEntry | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1 | not-accessible | The statistics for the NFS version 3 service. | |
| nfsV3StatsTable | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23 | not-accessible | The statistics for the NFS version 3 service. The number of entries in this table is given by the value of clusterPNodeNumber. | |
| C32 nfsV3symLink | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.12 | Counter32 | read-only | The total number of 'SymLink' calls received for NFS version 3 since power up. |
| C32 nfsV3write | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.9 | Counter32 | read-only | The total number of 'Write' calls received for NFS version 3 since power up. |
| nfsVersion2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1 | |||
| nfsVersion3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2 | |||
| nis | 1.3.6.1.4.1.11096.6.1.1.2.7 | |||
| STR nisCurrentMaster | 1.3.6.1.4.1.11096.6.1.1.2.7.3 | DisplayString | read-only | The current NIS master host address. |
| STR nisDomain | 1.3.6.1.4.1.11096.6.1.1.2.7.2 | DisplayString | read-only | The NIS domain name. |
| INT nisEnabled | 1.3.6.1.4.1.11096.6.1.1.2.7.1 | INTEGER | read-only | Indicates whether NIS is enabled on this system or not. |
| U32 nisRebindInterval | 1.3.6.1.4.1.11096.6.1.1.2.7.7 | Unsigned32 | read-only | NIS rebind in minutes. |
| INT nisServerBroadcastEnabled | 1.3.6.1.4.1.11096.6.1.1.2.7.4 | INTEGER | read-only | Indicates whether NIS should broadcast for NIS servers on the local network instead of using the configured list of servers. |
| nisServerEntry | 1.3.6.1.4.1.11096.6.1.1.2.7.10.1 | not-accessible | Information about each configured NIS server. | |
| I32 nisServerIndex | 1.3.6.1.4.1.11096.6.1.1.2.7.10.1.1 | Integer32 | read-only | A unique value for each configured NIS server. Its value ranges between 1 and the value of nisServerNumber. |
| IP nisServerIpAddress | 1.3.6.1.4.1.11096.6.1.1.2.7.10.1.2 | IpAddress | read-only | The IP address of the NIS server. |
| I32 nisServerNumber | 1.3.6.1.4.1.11096.6.1.1.2.7.9 | Integer32 | read-only | The number of NIS servers which have been configured. A value of -1 indicates this information could not be determined. |
| I32 nisServerPriority | 1.3.6.1.4.1.11096.6.1.1.2.7.10.1.3 | Integer32 | read-only | The priority assigned to the NIS server. A value of -1 indicates this information could not be determined. |
| nisServerTable | 1.3.6.1.4.1.11096.6.1.1.2.7.10 | not-accessible | A table containing information about each NIS server. The number of entries in this table is given by the value of nisServerNumber. | |
| U32 nisTimeout | 1.3.6.1.4.1.11096.6.1.1.2.7.6 | Unsigned32 | read-only | NIS timeout value in milliseconds. |
| U32 nisUserGroupTimeout | 1.3.6.1.4.1.11096.6.1.1.2.7.8 | Unsigned32 | read-only | NIS user/group/netgroup timeout value in minutes. |
| INT nisVerificationEnabled | 1.3.6.1.4.1.11096.6.1.1.2.7.5 | INTEGER | read-only | Indicates whether NIS verification is enabled or not. |
| nsOrder | 1.3.6.1.4.1.11096.6.1.1.2.6.3 | |||
| U32 ntCancelCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.39 | Unsigned32 | read-only | The total number of 'NTcancel' CIFS calls received since power up. |
| U32 ntCreateXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.38 | Unsigned32 | read-only | The total number of 'NTcreateX' CIFS calls received since power up. |
| ntpServerEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1 | not-accessible | Information about each configured NTP server. | |
| STR ntpServerHost | 1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1.1 | DisplayString | read-only | The hostname or IP address of the NTP server. |
| I32 ntpServerNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.2.5 | Integer32 | read-only | The number of NTP servers which have been configured to assist in synchronization of this silicon servers time. |
| ntpServerTable | 1.3.6.1.4.1.11096.6.1.1.1.2.2.6 | not-accessible | A table containing information about each NTP server. The number of entries in this table is given by the value of ntpServerNumber. | |
| U32 ntTransCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.36 | Unsigned32 | read-only | The total number of 'NTtrans' CIFS calls received since power up. |
| U32 ntTranssCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.37 | Unsigned32 | read-only | The total number of 'NTtranss' CIFS calls received since power up. |
| C32 null2Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.1 | Counter32 | read-only | The total number of 'Null' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 null3Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.1 | Counter32 | read-only | The total number of 'Null' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 nvramFsStatsActivityCheckpoints | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.4 | Unsigned32 | read-only | The number of checkpoints which have occurred for the NVRAM assigned to this volume as a result of file system activity (i.e. not timed checkpoints. |
| U32 nvramFsStatsCheckpoints | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.3 | Unsigned32 | read-only | The total number of checkpoints which have occurred for the NVRAM assigned to this volume. |
| U32 nvramFsStatsCurrentUsage | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.2 | Unsigned32 | read-only | The amount of NVRAM currently in use for this volume. |
| nvramFsStatsEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1 | not-accessible | Information about NVRAM on a given file system. The file system must be formatted, mounted, and NVRAM must be supported. | |
| U32 nvramFsStatsNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.9.1 | Unsigned32 | read-only | The number of volumes with NVRAM statistics. |
| nvramFsStatsTable | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2 | not-accessible | A table of NVRAM data for a given file system. | |
| U32 nvramFsStatsWaitedAllocs | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.5 | Unsigned32 | read-only | The number of allocations for this file system for which a wait has occurred. |
| U32 nvramFsStatsWaitingAllocs | 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.6 | Unsigned32 | read-only | The number of allocations for this file system for which a wait is currently occurring. |
| nvramPoolStatsEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1 | not-accessible | Information about NVRAM on a given Cluster Node. | |
| U32 nvramPoolStatsMaximumUsed | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.3 | Unsigned32 | read-only | The maximum amount of nvram used. If no formatted or mounted file system is found, or if nvram is not supported, this value will be reported as zero. |
| U32 nvramPoolStatsSize | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.2 | Unsigned32 | read-only | The total size of nvram. If no formatted or mounted file system is found, or if nvram is not supported, this value will be reported as zero. |
| nvramPoolStatsTable | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6 | not-accessible | A table of NVRAM data for a given Cluster Node. | |
| U32 nvramPoolStatsTotalCurrentUsage | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.4 | Unsigned32 | read-only | The amount of nvram currently in use. If no formatted or mounted file system is found, or if nvram is not supported, this value will be reported as zero. |
| U32 nvramPoolStatsWaitedAllocs | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.5 | Unsigned32 | read-only | The number of allocations, for the entire NVRAM pool, for which a wait has occurred. |
| U32 nvramPoolStatsWaitingAllocs | 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.6 | Unsigned32 | read-only | The number of allocations, for the entire NVRAM pool, for which a wait is occurring. |
| nvramStats | 1.3.6.1.4.1.11096.6.1.1.1.3.9 | |||
| C64 oneWriteCumLatency | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.9 | Counter64 | read-only | The cumulative latency for single buffer write operations in microseconds. |
| U32 openCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.5 | Unsigned32 | read-only | The total number of 'Open' CIFS calls received since power up. |
| U32 openXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.24 | Unsigned32 | read-only | The total number of 'OpenX' CIFS calls received since power up. |
| U32 opsPerSecAverage | 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.3 | Unsigned32 | read-only | The average file system accesses per second for the FileSystem. These accesses relate to network protocols (such as CIFS and NFS) as well as commands issued from the CLI, backup and various background processes. This average does not include hardware-accelerated accesses, and so the values obtained may differ from opsPerSecond, a cluster- wide value that includes hardware-accelerated accesses. If the FileSystem is not mounted, or is unavailable for some other reason, this value is zero. |
| U32 opsPerSecond | 1.3.6.1.4.1.11096.6.1.1.1.2.1.5 | Unsigned32 | read-only | The number of operations per second. This value includes all hardware-accelerated access to file systems on a cluster-wide basis. It may not correspond with the values obtained from opsPerSecAverage in the fsStatsTable. |
| C32 pathConf3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.21 | Counter32 | read-only | The total number of 'PathConf' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C64 pausedOffTime | 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.19 | Counter64 | read-only | The total time in seconds that an interface has been paused by a connected switch. This value is only defined for aggregated interfaces; for cluster or management interfaces, it will be zero. |
| performance | 1.3.6.1.4.1.11096.6.1.1.6 | |||
| C64 physicalDriveCapacity | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.8 | Counter64 | read-only | The storage capacity of the drive in bytes. NOTE: If the drive bay is empty this value will be 0. This object is now obsolete. |
| U32 physicalDriveColumnIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.3 | Unsigned32 | read-only | The column in the enclosure in which the physical drive bay is located. Column numbers starts at 1 (column 1 is located at the left hand side of the enclosure). This object is now obsolete. |
| U32 physicalDriveEnclosureIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.2 | Unsigned32 | read-only | The enclosure in which the physical drive bay is located. Enclosure numbers start at 1. This object is now obsolete. |
| physicalDriveEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1 | not-accessible | Status information about the drive bay. This object is now obsolete. | |
| I32 physicalDriveNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.1 | Integer32 | read-only | The number of physical drive bays (regardless of whether they contain a drive) which are present within all racks and enclosures within the system. This object is now obsolete. |
| I32 physicalDriveRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.1 | Integer32 | read-only | The rack in which the drive is located. The drive identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| U32 physicalDriveRowIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.4 | Unsigned32 | read-only | The row in the enclosure in which the physical drive bay is located. Row numbers starts at 1 (row 1 is located at the top of the enclosure). Example: row 1, column 1 is the top left hand bay within an enclosure. This object is now obsolete. |
| physicalDrives | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2 | |||
| INT physicalDriveStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.5 | INTEGER | read-only | The status of the physical drive bay. notPresent(1) - indicates that there is no drive present within the drive bay. This object is now obsolete. |
| physicalDriveTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2 | not-accessible | A table containing the status of each drive bay present on this system. The number of entries in this table is given by the value of physicalDriveNumber. This object is now obsolete. | |
| INT physicalDriveVendor | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.6 | INTEGER | read-only | The vendor of the drive. NOTE: If the drive bay is empty this value will be set to unknown(2). This object is now obsolete. |
| STR physicalDriveVersion | 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.7 | DisplayString | read-only | The version of the firmware installed in the drive. NOTE: If the drive bay is empty this value will be a zero length string. This object is now obsolete. |
| powerUnits | 1.3.6.1.4.1.11096.6.1.1.1.1 | |||
| C64 protCumulativeLatency | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.7 | Counter64 | read-only | The cumulative latency experienced by operations for this opcode. |
| protocolStats | 1.3.6.1.4.1.11096.6.1.1.6.6 | |||
| protocolStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1 | not-accessible | Network protocol statistical information. | |
| I32 protocolStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.6.1 | Integer32 | read-only | The number of protocol statistical entries in the table. If enhanced statistics gathering is not enabled, this value will be zero. See the command enhanced-perf-stats. |
| protocolStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.6.2 | not-accessible | Table of network protocol statistics entries. If enhanced statistics gathering is not enabled, this table will be empty. See the command enhanced-perf-stats. | |
| C64 protocolXferStatsBytesRead | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1.4 | Counter64 | read-only | The number of bytes read. |
| C64 protocolXferStatsBytesWritten | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1.5 | Counter64 | read-only | The number of bytes written. |
| protocolXferStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1 | not-accessible | Read and Write transfer total for each of the following network protocols: CIFS, NFS. | |
| INT protocolXferStatsFlavor | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1.2 | INTEGER | read-only | Enumerated identity of the network protocols. |
| I32 protocolXferStatsFsId | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1.1 | Integer32 | read-only | The device Id for this file system. |
| STR protocolXferStatsFsLabel | 1.3.6.1.4.1.11096.6.1.1.6.6.8.1.3 | DisplayString | read-only | The file system label. |
| I32 protocolXferStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.6.7 | Integer32 | read-only | The number of network protocols for which statistics are available. If enhanced statistics gathering is not enabled, this value will be zero. See the command enhanced-perf-stats. |
| protocolXferStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.6.8 | not-accessible | Table of protocol transfer total statistics entries. If enhanced statistics gathering is not enabled, this table will be empty. See the command enhanced-perf-stats. | |
| C64 protOpCount | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.6 | Counter64 | read-only | The total number of operations for this type of opcode. |
| INT protStatsFlavor | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.2 | INTEGER | read-only | The type of network protocol these statistics pertain to one of CIFS, NFS. |
| I32 protStatsFsId | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.1 | Integer32 | read-only | The device ID for this file system. |
| STR protStatsFsLabel | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.4 | DisplayString | read-only | The file system label. |
| U32 protStatsOpCode | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.3 | Unsigned32 | read-only | The opcode for the protocol operation in question. |
| STR protStatsOpCodeName | 1.3.6.1.4.1.11096.6.1.1.6.6.2.1.5 | DisplayString | read-only | The name of the op-code. |
| I32 psuClusterNode | 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.1 | Integer32 | read-only | The ID of the Cluster Node in which the psu is located. |
| psuEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1 | not-accessible | Information about each psu. | |
| I32 psuIndex | 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.2 | Integer32 | read-only | A unique value for each psu on a cluster node. |
| I32 psuNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.1.12 | Integer32 | read-only | The number of psus (regardless of their current state) present in all silicon server units in the cluster. |
| INT psuOneStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.3 | INTEGER | read-only | The status of power supply unit 1 within the silicon server. |
| INT psuStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.3 | INTEGER | read-only | Indicates the status of the psu. ok(1) - the psu is ok. failed(2) - the psu has failed. notFitted(3) - the psu is not fitted. unknown(4) - the status could not be determined. |
| psuTable | 1.3.6.1.4.1.11096.6.1.1.1.2.1.13 | not-accessible | A table containing information about the psus located in the silicon server unit. | |
| INT psuTwoStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.4 | INTEGER | read-only | The status of power supply unit 2 within the silicon server. |
| INT puConfigCommsEverOK | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.6 | INTEGER | read-only | Indicates whether the system has ever communicated with the power unit. This object is obsolete. Power units must be indexed by IP address. |
| INT puConfigCommsOK | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.5 | INTEGER | read-only | Indicates whether the system is currently communicating with the power unit. This object is obsolete. Power units must be indexed by IP address. |
| puConfigEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1 | not-accessible | Configuration information for a power unit which may be present on this system. This object is obsolete. Power units must be indexed by IP address. | |
| I32 puConfigIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.1 | Integer32 | read-only | A unique value for each power unit which may be present on this system. Its value ranges between 1 and the value of puConfigNumber. This object is obsolete. Power units must be indexed by IP address. |
| I32 puConfigNumber | 1.3.6.1.4.1.11096.6.1.1.1.1.1 | Integer32 | read-only | The number of power units (regardless of their current state) which may be present on this system. This object is obsolete. Power units must be indexed by IP address. |
| INT puConfigShutdownEnabled | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.2 | INTEGER | read-only | Indicates whether the power unit is to control the shutdown of the system when a power outage is detected. enabled(1) - the power unit will control the shutdown. disabled(2) - the power unit will NOT control the shutdown. This object is obsolete. Power units must be indexed by IP address. |
| INT puConfigShutdownInterval | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.3 | INTEGER | read-only | This variable is used in conjunction with puConfigShutdownRemainingLife such that when either condition is met a controlled shutdown will take place. puConfigShutdownInterval specifies the interval after which a controlled shutdown should take place in the event of a power outage. remainingLife(1) - indicates that the shutdown is based on the remaining battery life only and NOT the duration of the power outage. The variable puConfigShutdownRemainingLife determines how the shutdown is controlled. immediately(2) - the shutdown should take place as soon as the power outage is detected. The variable puConfigRemainingLife is irrelevant in this case. oneMinute(3), twoMinutes(4), threeMinutes(5), - the interval after which a controlled fiveMinutes(6), shutdown should take place in the event of tenMinutes(7) a power outage. NOTE: the variable puConfigShutdownEnabled must be enabled(1), for this variable to have any effect in determining when the controlled shutdown is performed. This object is obsolete. Power units must be indexed by IP address. |
| INT puConfigShutdownRemainingLife | 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.4 | INTEGER | read-only | Specifies the number of minutes of battery life which when depleted will cause a controlled shutdown of the system. NOTE: the variable puConfigShutdownEnabled must be enabled(1), for this variable to have any effect in determining when the controlled shutdown is performed. This object is obsolete. Power units must be indexed by IP address. |
| puConfigTable | 1.3.6.1.4.1.11096.6.1.1.1.1.2 | not-accessible | A table of configuration information relevant to each power unit which may be present on this system. The number of entries in this table is given by the value of puConfigNumber. This object is obsolete. Power units must be indexed by IP address. | |
| INT puConfigurationCommsEverOK | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.9 | INTEGER | read-only | Indicates whether the system has ever communicated with the power unit. |
| INT puConfigurationCommsOK | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.8 | INTEGER | read-only | Indicates whether the system is currently communicating with the power unit. |
| I32 puConfigurationCount | 1.3.6.1.4.1.11096.6.1.1.1.1.7 | Integer32 | read-only | The number of power units (regardless of their current state) which may be present on this system. |
| puConfigurationEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1 | not-accessible | Configuration information for a power unit which may be present on this system. | |
| IP puConfigurationIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.1 | IpAddress | read-only | An IP address for each power unit which may be present on this system. 0.0.0.0 is given for a serial-attached UPS. |
| INT puConfigurationMonitoringEnabled | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.3 | INTEGER | read-only | Indicates whether monitoring is enabled on the UPS. If monitoring is enabled, then the power unit is to control the shutdown of the system when a power outage is detected. |
| I32 puConfigurationOnBatteryTolerance | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.7 | Integer32 | read-only | The length of time, in seconds, for which the UPS must be on battery before the system will act on it, no matter what the shutdown settings are. |
| I32 puConfigurationShutdownOnBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.4 | Integer32 | read-only | If the value is not -1, then the system will be shut down after running on battery for the specified time in minutes. |
| I32 puConfigurationShutdownOnLowBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.6 | Integer32 | read-only | If the value is not -1, then the system will shut down when UPS reports a low battery, with a delay of the specified number of minutes. |
| I32 puConfigurationShutdownOnRuntime | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.5 | Integer32 | read-only | If the value is not -1, then shutdown will occur when the estimated remaining runtime falls below the specified value in minutes. |
| puConfigurationTable | 1.3.6.1.4.1.11096.6.1.1.1.1.8 | not-accessible | A table of configuration information relevant to each power unit which may be present on this system. The number of entries in this table is given by the value of puConfigurationCount. | |
| STR puConfigurationUserName | 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.2 | DisplayString | read-only | The UPS management card's admin user name, used with the authentication phrase for authenticating status updates from the UPS. Empty if authentication is disabled. |
| INT puCurrentStatusAlarmSetting | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.10 | INTEGER | read-only | The audible alarm setting for the power unit. |
| INT puCurrentStatusBatteryAlmostUsedUp | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.18 | INTEGER | read-only | Indicates whether the power units battery is almost used up. |
| STR puCurrentStatusBatteryReplacedDate | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.5 | DisplayString | read-only | The last date a battery was replaced within this the power unit in manufacturers format. |
| INT puCurrentStatusCalibrating | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.11 | INTEGER | read-only | Indicates whether the power unit is calibrating or not. |
| INT puCurrentStatusChangeBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.19 | INTEGER | read-only | Indicates whether the power units battery should be changed. |
| I32 puCurrentStatusCount | 1.3.6.1.4.1.11096.6.1.1.1.1.9 | Integer32 | read-only | The number of power units from which status information can be gathered. Status information is only available for power units that the system is able to communicate with. |
| puCurrentStatusEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1 | not-accessible | Status information for each power unit the system is communicating with. | |
| IP puCurrentStatusIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.1 | IpAddress | read-only | The power unit from which the status information has been gathered. The power unit identified by a particular IP address is the same power unit as identified by the same value of puConfigurationIndex. |
| I32 puCurrentStatusLowBatteryInterval | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.9 | Integer32 | read-only | The length of time between the power unit warning of a low battery and turning off in minutes. |
| I32 puCurrentStatusLowerTransferVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.7 | Integer32 | read-only | The lower battery transfer voltage in Volts. |
| STR puCurrentStatusManufactureDate | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.4 | DisplayString | read-only | The date of manufacture of the power unit as declared by the manufacturer in their chosen format. |
| STR puCurrentStatusModel | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.2 | DisplayString | read-only | The model of the power unit as declared by the manufacturer. |
| INT puCurrentStatusOnBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.16 | INTEGER | read-only | Indicates whether the power unit is operating on the battery or mains. |
| INT puCurrentStatusOnline | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.15 | INTEGER | read-only | Indicates whether the power unit is on or off line. |
| INT puCurrentStatusOverload | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.17 | INTEGER | read-only | Indicates whether the UPS is overloaded. |
| INT puCurrentStatusSensitivity | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.8 | INTEGER | read-only | The sensitivity of the power unit. |
| STR puCurrentStatusSerialNumber | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.3 | DisplayString | read-only | The serial number of the power unit as declared by the manufacturer. |
| INT puCurrentStatusSleeping | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.12 | INTEGER | read-only | Indicates whether the power unit is sleeping or not. This object is only applicable to a Symmetra UPS; in all other cases, it will be notDefined(1). |
| INT puCurrentStatusSmartBoost | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.14 | INTEGER | read-only | Indicates whether SmartBoost is enabled or not. |
| INT puCurrentStatusSmartTrim | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.13 | INTEGER | read-only | Indicates whether SmartTrim is enabled or not. This object is not applicable to a Symmetra UPS; in this case, it will be notDefined(1). |
| puCurrentStatusTable | 1.3.6.1.4.1.11096.6.1.1.1.1.10 | not-accessible | A table containing the status of each power unit the system is communicating with. The number of entries in this table is given by the value of puCurrentStatusCount. | |
| I32 puCurrentStatusUpperTransferVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.6 | Integer32 | read-only | The upper battery transfer voltage in Volts. |
| INT puStatisticsBatteryCharge | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.2 | INTEGER | read-only | The percentage by which the battery is charged. |
| I32 puStatisticsBatteryVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.7 | Integer32 | read-only | The battery voltage in Volts. |
| I32 puStatisticsCount | 1.3.6.1.4.1.11096.6.1.1.1.1.11 | Integer32 | read-only | The number of power units from which statistics can be gathered. Statistics are only available for power units that the system is able to communicate with. |
| puStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1 | not-accessible | Statistics for each power unit the system is communicating with. | |
| I32 puStatisticsFrequency | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.4 | Integer32 | read-only | The frequency of the AC mains in Hertz. |
| I32 puStatisticsIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.1 | Integer32 | read-only | The power unit from which the statistics have been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigurationIndex. |
| I32 puStatisticsLineMaximumVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.11 | Integer32 | read-only | The maximum line voltage in Volts. |
| I32 puStatisticsLineMininumVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.10 | Integer32 | read-only | The minimum line voltage in Volts. |
| I32 puStatisticsLineVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.5 | Integer32 | read-only | The AC mains voltage entering the power unit in Volts. |
| INT puStatisticsLoad | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.3 | INTEGER | read-only | The percentage of the rated load in Watts. |
| I32 puStatisticsOutputVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.6 | Integer32 | read-only | The output voltage of the power unit in Volts. |
| I32 puStatisticsRemainingRunTime | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.12 | Integer32 | read-only | The remaining runtime of the battery based on the obsolete load in minutes. |
| puStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.1.1.12 | not-accessible | A table containing statistics for each power unit the system is communicating with. The number of entries in this table is given by the value of puStatisticsCount. | |
| I32 puStatisticsTemperatureC | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.8 | Integer32 | read-only | The temperature inside the power unit in degrees Celsius. |
| I32 puStatisticsTemperatureF | 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.9 | Integer32 | read-only | The temperature inside the power unit in degrees Fahrenheit. |
| INT puStatsBatteryCharge | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.2 | INTEGER | read-only | The percentage by which the battery is charged. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsBatteryVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.7 | Integer32 | read-only | The battery voltage in Volts. This object is obsolete. Power units must be indexed by IP address. |
| puStatsEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1 | not-accessible | Statistics for each power unit the system is communicating with. This object is obsolete. Power units must be indexed by IP address. | |
| I32 puStatsFrequency | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.4 | Integer32 | read-only | The frequency of the AC mains in Hertz. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.1 | Integer32 | read-only | The power unit from which the statistics have been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigurationIndex. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsLineMaximumVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.11 | Integer32 | read-only | The maximum line voltage in Volts. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsLineMininumVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.10 | Integer32 | read-only | The minimum line voltage in Volts. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsLineVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.5 | Integer32 | read-only | The AC mains voltage entering the power unit in Volts. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatsLoad | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.3 | INTEGER | read-only | The percentage of the rated load in Watts. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsNumber | 1.3.6.1.4.1.11096.6.1.1.1.1.5 | Integer32 | read-only | The number of power units from which statistics can be gathered. Statistics are only available for power units that the system is able to communicate with. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsOutputVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.6 | Integer32 | read-only | The output voltage of the power unit in Volts. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsRemainingRunTime | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.12 | Integer32 | read-only | The remaining runtime of the battery based on the obsolete load in minutes. This object is obsolete. Power units must be indexed by IP address. |
| puStatsTable | 1.3.6.1.4.1.11096.6.1.1.1.1.6 | not-accessible | A table containing statistics for each power unit the system is communicating with. The number of entries in this table is given by the value of puStatsNumber. This object is obsolete. Power units must be indexed by IP address. | |
| I32 puStatsTemperatureC | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.8 | Integer32 | read-only | The temperature inside the power unit in degrees Celsius. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatsTemperatureF | 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.9 | Integer32 | read-only | The temperature inside the power unit in degrees Fahrenheit. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusAlarmSetting | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.10 | INTEGER | read-only | The audible alarm setting for the power unit. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusBatteryAlmostUsedUp | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.15 | INTEGER | read-only | Indicates whether the power units battery is almost used up. This object is obsolete. Power units must be indexed by IP address. |
| STR puStatusBatteryReplaceDate | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.5 | DisplayString | read-only | The last date a battery was replaced within this the power unit in manufacturers format. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusCalibrating | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.11 | INTEGER | read-only | Indicates whether the power unit is calibrating or not. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusChangeBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.16 | INTEGER | read-only | Indicates whether the power units battery should be changed. This object is obsolete. Power units must be indexed by IP address. |
| puStatusEntry | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1 | not-accessible | Status information for each power unit the system is communicating with. This object is obsolete. Power units must be indexed by IP address. | |
| I32 puStatusIndex | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.1 | Integer32 | read-only | The power unit from which the status information has been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigIndex. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatusLowBatteryInterval | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.9 | Integer32 | read-only | The length of time between the power unit warning of a low battery and turning off in minutes. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatusLowerTransferVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.7 | Integer32 | read-only | The lower battery transfer voltage in Volts. This object is obsolete. Power units must be indexed by IP address. |
| STR puStatusManufactureDate | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.4 | DisplayString | read-only | The date of manufacture of the power unit as declared by the manufacturer in their chosen format. This object is obsolete. Power units must be indexed by IP address. |
| STR puStatusModel | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.2 | DisplayString | read-only | The model of the power unit as declared by the manufacturer. This object is obsolete. Power units must be indexed by IP address. |
| I32 puStatusNumber | 1.3.6.1.4.1.11096.6.1.1.1.1.3 | Integer32 | read-only | The number of power units from which status information can be gathered. Status information is only available for power units that the system is able to communicate with. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusOnBattery | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.14 | INTEGER | read-only | Indicates whether the power unit is operating on the battery or mains. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusOnline | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.13 | INTEGER | read-only | Indicates whether the power unit is on or off line. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusSensitivity | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.8 | INTEGER | read-only | The sensitivity of the power unit. This object is obsolete. Power units must be indexed by IP address. |
| STR puStatusSerialNumber | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.3 | DisplayString | read-only | The serial number of the power unit as declared by the manufacturer. This object is obsolete. Power units must be indexed by IP address. |
| INT puStatusSleeping | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.12 | INTEGER | read-only | Indicates whether the power unit is sleeping or not. This object is obsolete. Power units must be indexed by IP address. |
| puStatusTable | 1.3.6.1.4.1.11096.6.1.1.1.1.4 | not-accessible | A table containing the status of each power unit the system is communicating with. The number of entries in this table is given by the value of puStatusNumber. This object is obsolete. Power units must be indexed by IP address. | |
| I32 puStatusUpperTransferVoltage | 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.6 | Integer32 | read-only | The upper battery transfer voltage in Volts. This object is obsolete. Power units must be indexed by IP address. |
| rackEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1 | not-accessible | Status information about each rack in the system. This table is now obsolete. | |
| I32 rackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.1 | Integer32 | read-only | A unique value for each rack present in this system. Its value ranges between 1 and the value of rackNumber. This object is now obsolete. |
| I32 rackNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.1.1 | Integer32 | read-only | The number of racks (regardless of their current state) which are present in this system. This object is now obsolete. |
| U32 rackNumberOfEnclosures | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.3 | Unsigned32 | read-only | The number of storage enclosures which are normally accessible by this rack. NOTE: If rackStatus is not ok, the value of this variable will be 0. This object is now obsolete. |
| U32 rackNumberOfPhysicalDrives | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.4 | Unsigned32 | read-only | The number of physical drives which are normally accessible by this rack. NOTE: If rackStatus is not ok, the value of this variable will be 0. This object is now obsolete. |
| racks | 1.3.6.1.4.1.11096.6.1.1.1.3.1 | |||
| INT rackStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.2 | INTEGER | read-only | Indicates the status of the rack. ok(1) - the RAID monitoring software is communicating with the rack. storageFailed(2) - the RAID controller associated with this rack has failed. loopFailed(3) - the fibre channel loop has failed. otherFailure(4) - the system is unable to communicate with the rack, it may be booting. This object is now obsolete. |
| rackTable | 1.3.6.1.4.1.11096.6.1.1.1.3.1.2 | not-accessible | A table containing information about each rack in this system. The number of entries in this table is given by the value of rackNumber. This table is now obsolete. | |
| raid | 1.3.6.1.4.1.11096.6.1.1.1.3.2 | |||
| raidControllerActiveTaskEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1 | not-accessible | Information about the active task being performed by the RAID controller. This object is now obsolete. | |
| U32 raidControllerActiveTaskIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.2 | Unsigned32 | read-only | A unique value for each task being performed on a specific RAID controller. This object is now obsolete. |
| U32 raidControllerActiveTaskLUN | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.4 | Unsigned32 | read-only | The LUN of the system drive on which the active task is being performed by the RAID controller. NOTE: the value is 0 for tasks which are not related to System Drives. These are where the variable raidControllerActiveTaskType is reconditioningBattery(5) or chargingBattery(6) (affecting the battery backup unit), or unknown(7). This object is now obsolete. |
| I32 raidControllerActiveTaskNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.4 | Integer32 | read-only | The number of active tasks which are currently being performed by the RAID controller(s) in the system. This object is now obsolete. |
| INT raidControllerActiveTaskPercentageDone | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.5 | INTEGER | read-only | The percentage of the task which is complete. This object is now obsolete. |
| I32 raidControllerActiveTaskRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.1 | Integer32 | read-only | The rack in which the RAID controller is located. The controller identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| raidControllerActiveTaskTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5 | not-accessible | A table containing information about the tasks currently being performed by RAID controller(s) present in the system. The number of entries in this table is given by the value of raidControllerActiveTaskNumber. This object is now obsolete. | |
| INT raidControllerActiveTaskType | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.3 | INTEGER | read-only | The type of task being performed by the RAID controller. This object is now obsolete. |
| INT raidControllerBatteryBackupBatteryType | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.12 | INTEGER | read-only | The type of the battery in the battery backup unit. This object is now obsolete. |
| INT raidControllerBatteryBackupChargePercent | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.10 | INTEGER | read-only | The percentage charge held by the battery. This object is now obsolete. |
| INT raidControllerBatteryBackupDischarging | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.7 | INTEGER | read-only | Indicates whether the battery is currently being discharged. discharging(1) - the battery is currently being discharged. notDischarging(2) - the battery is NOT currently being discharged. This object is now obsolete. |
| raidControllerBatteryBackupEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1 | not-accessible | Information about the battery backup unit within a RAID controller. This object is now obsolete. | |
| INT raidControllerBatteryBackupFastCharging | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.8 | INTEGER | read-only | Indicates whether the battery is currently fast charging. fastCharging(1) - the battery is currently being fast charged. notFastCharging(2) - the battery is NOT currently being fast charged. This object is now obsolete. |
| INT raidControllerBatteryBackupFirstWarning | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.4 | INTEGER | read-only | Indicates whether a first warning for low battery power has been issued. firstWarning(1) - a first warning has been issued. noFirstWarning(2) - no first warning has been issued. This object is now obsolete. |
| U32 raidControllerBatteryBackupHardwareVersion | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.11 | Unsigned32 | read-only | The hardware version of the battery backup unit. This object is now obsolete. |
| INT raidControllerBatteryBackupLowPower | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.9 | INTEGER | read-only | Indicates whether the battery is issuing a low power alarm. lowPowerAlarm(1) - the battery is issuing a low power alarm. noLowPowerAlarm(2) - the battery is NOT issuing a lower power alarm. This object is now obsolete. |
| INT raidControllerBatteryBackupNoSync | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.2 | INTEGER | read-only | Indicates whether a reconditioning cycle has been performed since power up of the RAID controller. noSync(1) - there has NOT been a reconditioning cycle since powering up the RAID controller. sync(2) - there has been a reconditioning cycle since powering up the RAID controller. This object is now obsolete. |
| INT raidControllerBatteryBackupOutOfSync | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.3 | INTEGER | read-only | Indicates whether a reconditioning cycle is needed. outOfSync(1) - a reconditioning cycle needs to be performed. sync(2) - a reconditioning cycle does NOT need to be performed. This object is now obsolete. |
| I32 raidControllerBatteryBackupRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.1 | Integer32 | read-only | The rack in which the RAID controller containing the battery backup unit is located. The controller and battery backup unit identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT raidControllerBatteryBackupReconditioning | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.6 | INTEGER | read-only | Indicates whether the battery is currently being reconditioned. reconditioning(1) - the battery is being reconditioned. notReconditioning(2) - the battery is NOT being reconditioned. This object is now obsolete. |
| INT raidControllerBatteryBackupSecondWarning | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.5 | INTEGER | read-only | Indicates whether a second warning for low battery power has been issued. secondWarning(1) - a second warning has been issued. noSecondWarning(2) - no second warning has been issued. This object is now obsolete. |
| raidControllerBatteryBackupTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3 | not-accessible | A table containing information about the battery backup unit within each RAID controller present in each rack within the system. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This object is now obsolete. | |
| U32 raidControllerBatteryBackupThreshold | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.13 | Unsigned32 | read-only | The threshold of the battery life in minutes. This object is now obsolete. |
| U32 raidControllerCacheSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.7 | Unsigned32 | read-only | The size of the RAID controller(s) cache in bytes. NOTE: If the cache size cannot be obtained this value will be a 0. This object is now obsolete. |
| U32 raidControllerConfigClockSpeed | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.5 | Unsigned32 | read-only | The clock speed of the memory in the RAID controller in nanoseconds. This object is now obsolete. |
| U32 raidControllerConfigDRAMSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.2 | Unsigned32 | read-only | The size of the DRAM present in the RAID controller in bytes. This object is now obsolete. |
| raidControllerConfigEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1 | not-accessible | Configuration information about the RAID controller in a rack. This object is now obsolete. | |
| U32 raidControllerConfigFirmwareBuild | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.18 | Unsigned32 | read-only | Build version of the firmware installed in the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigFirmwareMajor | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.15 | Unsigned32 | read-only | Major version of firmware installed in this RAID controller. This object is now obsolete. |
| U32 raidControllerConfigFirmwareMinor | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.16 | Unsigned32 | read-only | Minor version of firmware installed in the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigFirmwareType | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.14 | Unsigned32 | read-only | Firmware type installed in this RAID controller. This object is now obsolete. |
| STR raidControllerConfigFirmwareVersion | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.13 | DisplayString | read-only | Firmware version installed in this RAID controller. This object is now obsolete. |
| U32 raidControllerConfigFlashSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.3 | Unsigned32 | read-only | The size of flash memory present in the RAID controller in bytes. This object is now obsolete. |
| U32 raidControllerConfigLogicalSectorSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.9 | Unsigned32 | read-only | The logical sector size supported by the RAID controller in bytes. This object is now obsolete. |
| U32 raidControllerConfigMaxDrivesPerSystemDrive | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.11 | Unsigned32 | read-only | The maximum number of drives which the RAID controller permits to be part of a system drive. This object is now obsolete. |
| U32 raidControllerConfigMaximumCommands | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.17 | Unsigned32 | read-only | Maximum number concurrent commands that may be performed by the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigMaxSpanPerVirtualDrive | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.12 | Unsigned32 | read-only | The maximum number of spans which the RAID controller permits to be part of a virtual drive. This object is now obsolete. |
| U32 raidControllerConfigMaxSystemDrives | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.10 | Unsigned32 | read-only | The maximum number of system drives supported by the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigMemAccess | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.6 | Unsigned32 | read-only | The access time of the memory in the RAID controller in nanoseconds. This object is now obsolete. |
| U32 raidControllerConfigMemCycle | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.7 | Unsigned32 | read-only | The cycle time of the memory in the RAID controller in nanoseconds. This object is now obsolete. |
| U32 raidControllerConfigNVRSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.4 | Unsigned32 | read-only | The size of non volatile memory present in the RAID controller in bytes. This object is now obsolete. |
| U32 raidControllerConfigPhysicalSectorSize | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.8 | Unsigned32 | read-only | The physical sector size supported by the RAID controller in bytes. This object is now obsolete. |
| I32 raidControllerConfigRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.1 | Integer32 | read-only | The rack in which the RAID controller is located. The controller identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| U32 raidControllerConfigRebuildOff | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.22 | Unsigned32 | read-only | The rebuild off time of the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigRebuildOn | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.21 | Unsigned32 | read-only | The rebuild on time of the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigRebuildRate | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.19 | Unsigned32 | read-only | The rebuild rate of the RAID controller. This object is now obsolete. |
| U32 raidControllerConfigRebuildUnit | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.20 | Unsigned32 | read-only | The rebuild unit size in milliseconds used in the rate figure raidControllerConfigRebuildRate for the RAID controller. This object is now obsolete. |
| raidControllerConfigTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2 | not-accessible | A table containing configuration information about the RAID controller present in each rack within the system. This information is the same for a RAID controller which has redundancy. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This object is now obsolete. | |
| raidControllerEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1 | not-accessible | General information about the RAID controller(s) in a rack. This table is now obsolete. | |
| STR raidControllerManufacturer | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.5 | DisplayString | read-only | The manufacturer of the RAID controller(s). NOTE: If the manufacturer cannot be obtained this value will be a zero length string. This object is now obsolete. |
| STR raidControllerModel | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.6 | DisplayString | read-only | The model of the RAID controller(s). NOTE: If the model cannot be obtained this value will be a zero length string. This object is now obsolete. |
| INT raidControllerPrimaryStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.3 | INTEGER | read-only | The status of primary RAID controller. This object is now obsolete. |
| I32 raidControllerRackIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.1 | Integer32 | read-only | The rack in which the RAID controller(s) are located. The controller(s) identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete. |
| INT raidControllerSecondaryStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.4 | INTEGER | read-only | The status of secondary RAID controller. NOTE: A status of notPresent(3) indicates that there is only one RAID controller within this rack. This object is now obsolete. |
| raidControllerTable | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1 | not-accessible | A table containing general information about RAID controller(s) present in each rack within the system. A rack may contain dual controllers for redundancy purposes. This (if present) will be indicated by the secondaryStatus field. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This table is now obsolete. | |
| STR raidControllerWWN | 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.2 | DisplayString | read-only | The world wide name identifying the RAID controller(s). NOTE: If the world wide name cannot be obtained this value will be a zero length string. This object is now obsolete. |
| C32 read2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.7 | Counter32 | read-only | The total number of 'Read' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 read3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.7 | Counter32 | read-only | The total number of 'Read' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 readBrawCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.18 | Unsigned32 | read-only | The total number of 'ReadBraw' CIFS calls received since power up. |
| U32 readCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.13 | Unsigned32 | read-only | The total number of 'Read' CIFS calls received since power up. |
| C64 readCount | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.5 | Counter64 | read-only | The total number of reads for this system drive. |
| C64 readCumLatency | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.8 | Counter64 | read-only | The cumulative latency for read operations in microseconds. |
| C32 readDir2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.17 | Counter32 | read-only | The total number of 'ReadDir' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 readDir3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.17 | Counter32 | read-only | The total number of 'ReadDir' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 readDirPlus3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.18 | Counter32 | read-only | The total number of 'ReadDirPlus' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 readLink2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.6 | Counter32 | read-only | The total number of 'ReadLink' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 readLink3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.6 | Counter32 | read-only | The total number of 'ReadLink' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 readXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.25 | Unsigned32 | read-only | The total number of 'ReadX' CIFS calls received since power up. |
| C32 remove2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.11 | Counter32 | read-only | The total number of 'Remove' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 remove3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.13 | Counter32 | read-only | The total number of 'Remove' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 rename2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.12 | Counter32 | read-only | The total number of 'Rename' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 rename3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.15 | Counter32 | read-only | The total number of 'Rename' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 renameCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.10 | Unsigned32 | read-only | The total number of 'Rename' CIFS calls received since power up. |
| C32 rmDir2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.16 | Counter32 | read-only | The total number of 'RmDir' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 rmDir3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.14 | Counter32 | read-only | The total number of 'RmDir' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 rmdirCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.4 | Unsigned32 | read-only | The total number of 'Rmdir' CIFS calls received since power up. |
| C32 rootCalls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.4 | Counter32 | read-only | The total number of 'Root' calls received since power up NOTE: this variable is not used/implemented. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 runningBossockFibers | 1.3.6.1.4.1.11096.6.1.1.6.7.4.1.2 | Unsigned32 | read-only | Number of threads managing a network socket that are running on this cluster node. |
| U32 searchCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.35 | Unsigned32 | read-only | The total number of 'Search' CIFS calls received since power up. |
| sectorCache | 1.3.6.1.4.1.11096.6.1.1.1.2.4.1 | |||
| INT sectorCacheDirtyPageTimeout | 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.3 | INTEGER | read-only | The current setting of the percentage dirty page timeout (specified in seconds) which is used in determining when to flush the disk sector cache. |
| INT sectorCacheDirtyPageWtmk | 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.2 | INTEGER | read-only | The current setting of the percentage dirty page watermark which is used in determining when to flush the disk sector cache. This object is now obsolete. |
| INT sectorCacheMode | 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.1 | INTEGER | read-only | The mode the disk sector cache is currently operating in. |
| U32 sectorCacheStatsCnIndex | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.1 | Unsigned32 | read-only | The cluster node for these statistics. |
| sectorCacheStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1 | not-accessible | Sector cache statistical information. Sector cache statistics are provided for the following operations: read, read-ahead, write. | |
| C32 sectorCacheStatsHitsPSI | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.3 | Counter32 | read-only | The number of cache hits experienced with this sector cache. |
| C32 sectorCacheStatsHitsSSI | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.4 | Counter32 | read-only | The number of cache hits experienced with this sector cache. |
| C32 sectorCacheStatsHitsTotal | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.5 | Counter32 | read-only | The number of cache hits experienced with this sector cache. |
| C32 sectorCacheStatsMissesPSI | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.6 | Counter32 | read-only | The number of cache misses experienced with this sector cache. |
| C32 sectorCacheStatsMissesSSI | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.7 | Counter32 | read-only | The number of cache misses experienced with this sector cache. |
| C32 sectorCacheStatsMissesTotal | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.8 | Counter32 | read-only | The number of cache misses experienced with this sector cache. |
| I32 sectorCacheStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.5.3 | Integer32 | read-only | The number of sector caches for which statistics are available. |
| sectorCacheStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.5.4 | not-accessible | Table of sector cache statistics entries | |
| INT sectorCacheType | 1.3.6.1.4.1.11096.6.1.1.6.5.4.1.2 | INTEGER | read-only | Enumerated identity of the operation to which these stats pertain. |
| secureWeb | 1.3.6.1.4.1.11096.6.1.1.5.3.4 | |||
| INT secureWebAccessEnabled | 1.3.6.1.4.1.11096.6.1.1.5.3.4.1 | INTEGER | read-only | Indicates whether access to the secure web interface is permitted or not. The setting disabled(2) indicates access to the secure web interface will not be allowed regardless of any other configuration settings for this interface. This object is now obsolete. |
| I32 secureWebAccessMaxConnections | 1.3.6.1.4.1.11096.6.1.1.5.3.4.6 | Integer32 | read-only | The maximum number of simultaneous connections which are allowed access to the secure web interface. This object is now obsolete. |
| I32 secureWebAccessPortNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.4.5 | Integer32 | read-only | The port number through which access to the secure web interface is available (subject to any security restrictions). This object is now obsolete. |
| INT secureWebAccessRestricted | 1.3.6.1.4.1.11096.6.1.1.5.3.4.2 | INTEGER | read-only | Indicates whether access to the secure web interface is restricted to the set of hostnames or IP addresses configured in secureWebAccessRestrictedTable or unrestricted (such that any client may access the secure web interface). NOTE: this setting controls the use of the secure web access restricted table in that there may be entries in this table, but access to the interface will be allowed from any host if this variable is set to unrestricted(2). This object is now obsolete. |
| secureWebAccessRestrictedEntry | 1.3.6.1.4.1.11096.6.1.1.5.3.4.4.1 | not-accessible | Restricted secure web access information. This object is now obsolete. | |
| STR secureWebAccessRestrictedHost | 1.3.6.1.4.1.11096.6.1.1.5.3.4.4.1.1 | DisplayString | read-only | The hostname or IP address of a client which has restricted access to the secure web interface. This object is now obsolete. |
| I32 secureWebAccessRestrictedNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.4.3 | Integer32 | read-only | The number of restricted secure web access entries configured. This object is now obsolete. |
| secureWebAccessRestrictedTable | 1.3.6.1.4.1.11096.6.1.1.5.3.4.4 | not-accessible | A table containing the hostnames or IP addresses of clients which have restricted access the secure web interface. The number of entries in this table is given by the value of secureWebAccessRestrictedNumber. This object is now obsolete. | |
| C64 secureWebCurrActiveSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.4.1 | Counter64 | read-only | The current number of active sessions made through the secure web interface. This object is now obsolete. |
| C64 secureWebMaxSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.4.2 | Counter64 | read-only | The maximum number of simultaneous sessions ever made through the secure web interface since power up. This object is now obsolete. |
| secureWebMgmntStats | 1.3.6.1.4.1.11096.6.1.1.5.9.4 | |||
| C64 secureWebRejectedSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.4.4 | Counter64 | read-only | The number of sessions which have been rejected through the secure web interface since power up. Sessions may be rejected due to either the maximum allowed number of sessions being met or host access restrictions. Refer to the secureWeb access variables. This object is now obsolete. |
| C64 secureWebTotalBytesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.4.8 | Counter64 | read-only | The total number of bytes received through the secure web interface since power up. This object is now obsolete. |
| C64 secureWebTotalBytesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.4.7 | Counter64 | read-only | The total number of bytes transmitted through the secure web interface since power up. This object is now obsolete. |
| C64 secureWebTotalFramesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.4.6 | Counter64 | read-only | The total number of frames received through the secure web interface since power up. This object is now obsolete. |
| C64 secureWebTotalFramesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.4.5 | Counter64 | read-only | The total number of frames transmitted through the secure web interface since power up. This object is now obsolete. |
| C64 secureWebTotalSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.4.3 | Counter64 | read-only | The total number of sessions made through the secure web interface since power up. This object is now obsolete. |
| security | 1.3.6.1.4.1.11096.6.1.1.3.1 | |||
| STR securityDomain | 1.3.6.1.4.1.11096.6.1.1.3.1.2 | DisplayString | read-only | The servers configured domain name. |
| INT securityMode | 1.3.6.1.4.1.11096.6.1.1.3.1.1 | INTEGER | read-only | Indicates the configured security model. mixed(1) - Windows or UNIX environments. unix(2) - primarily UNIX environments. nosecurity(3) - all requests granted. |
| sensorEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1 | not-accessible | Information collected from each sensor located within the silicon server unit. | |
| I32 sensorIndex | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.1 | Integer32 | read-only | A unique value for each sensor within the silicon server unit. Its value ranges between 1 and the value of sensorNumber. |
| I32 sensorNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.1.1 | Integer32 | read-only | The number of sensors (regardless of their current state) which are present within silicon server unit. |
| U32 sensorSpeedReading | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.3 | Unsigned32 | read-only | A measurement of the fan speed taken by the sensor in rpm. |
| INT sensorSpeedStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.2 | INTEGER | read-only | Indicates whether the speed measurement is within the expected range. ok(1) - the reading is within the expected range. warning(2) - the reading is outside of the expected range, but not severe. severe(3) - the sensor unit should be replaced. failed(4) - the sensor unit has failed. The measured speed is invalid. unknown(5) - the speed status could not be determined. |
| sensorTable | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2 | not-accessible | A table containing information gathered by sensors located within the silicon server unit. Each sensor takes a measurement of both fan speed and temperature. The number of entries in this table is given by the value of sensorNumber. | |
| I32 sensorTempCReading | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.5 | Integer32 | read-only | A measurement of the temperature taken by the sensor in degrees Celsius. |
| I32 sensorTempFReading | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.6 | Integer32 | read-only | A measurement of the temperature taken by the sensor in degrees Fahrenheit. |
| INT sensorTempStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.4 | INTEGER | read-only | Indicates whether the temperature measurement is within the expected range. ok(1) - the reading is within the expected range. warning(2) - the reading is outside of the expected range, but not severe. severe(3) - the sensor unit should be replaced. failed(4) - the sensor unit has failed. The measured temperature is invalid. |
| STR serialNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.4 | DisplayString | read-only | The serial number of the component. |
| serialNumberEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1 | not-accessible | Serial number for a component. | |
| serialNumbers | 1.3.6.1.4.1.11096.6.1.1.1.2.6 | |||
| serialNumberTable | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1 | not-accessible | Serial numbers for server components. | |
| server | 1.3.6.1.4.1.11096.6.1.1.1.2 | |||
| STR serverDate | 1.3.6.1.4.1.11096.6.1.1.1.2.2.1 | DisplayString | read-only | The local date reported by the server in the form YYYY-MM-DD Where YYYY is the year. MM is the number of the month (01-12). DD is the day of the month. |
| STR serverTime | 1.3.6.1.4.1.11096.6.1.1.1.2.2.2 | DisplayString | read-only | The local time reported by the server in the form HH:MM:SS (UTC+/-hh:mm) Where HH is the hour (using 24 hour clock). MM is the minute. SS is the second. The remainder of the date indicates the number of hours (hh) and minutes (mm) east of UTC the local time has been adjusted by. NOTE: a negative value for the UTC offset indicates a time zone which is west of UTC. |
| U32 sessSetupXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.31 | Unsigned32 | read-only | The total number of 'SessSetupX' CIFS calls received since power up. |
| U32 setatrCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.12 | Unsigned32 | read-only | The total number of 'Setatr' CIFS calls received since power up. |
| C32 setAttr2Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.3 | Counter32 | read-only | The total number of 'SetAttr' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 setAttr3Calls | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.3 | Counter32 | read-only | The total number of 'SetAttr' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| shareAccess | 1.3.6.1.4.1.11096.6.1.1.3.2.2 | |||
| shareAccessEntry | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1 | not-accessible | CIFS share access information. | |
| I32 shareAccessIndex | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.1 | Integer32 | read-only | An index for each access entry which exists for a CIFS share. For Si7000 and Si8000 families of SiServers, this value ranges between 1 and the number of access entries which exist for the share. The value is the ID of the EVS of the CIFS share for the access configuration. |
| STR shareAccessName | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.3 | DisplayString | read-only | The name of the user or group which has been granted access. |
| I32 shareAccessNumber | 1.3.6.1.4.1.11096.6.1.1.3.2.2.1 | Integer32 | read-only | The number of CIFS share access entries which are configured for the system. |
| INT shareAccessPerms | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.4 | INTEGER | read-only | The access permissions the user or group has been granted to the CIFS share. |
| STR shareAccessShareName | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.2 | DisplayString | read-only | The name of the CIFS share that the access configuration entry exists for. |
| shareAccessTable | 1.3.6.1.4.1.11096.6.1.1.3.2.2.2 | not-accessible | A table containing the CIFS share access configuration for the system. The number of entries in this table is given by the value of shareAccessNumber. | |
| STR shareComment | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.3 | DisplayString | read-only | An optional comment assigned by the creator of the CIFS share to assist in identifying it. NOTE: This will be a zero length string if the creator has not assigned a comment to it. |
| shareEntry | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1 | not-accessible | CIFS share information. | |
| U32 shareLUN | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.6 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the CIFS share is associated with. This now has no meaning and is set to zero. |
| I32 shareMaxUsers | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.8 | Integer32 | read-only | The maximum number of users which are permitted access to the CIFS share simultaneously. NOTE: this value is set to -1 if the number of maximum number of simultaneous users is unlimited. |
| STR shareName | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.1 | DisplayString | read-only | The name of the CIFS share. Each share has a unique name. |
| I32 shareNumber | 1.3.6.1.4.1.11096.6.1.1.3.2.1.1 | Integer32 | read-only | The number of CIFS shares which are configured for the system. |
| U32 sharePartitionID | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.7 | Unsigned32 | read-only | The partition ID of the volume the CIFS share is associated with. This now has no meaning and is set to zero. |
| STR sharePath | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.2 | DisplayString | read-only | The path to the CIFS share. |
| shares | 1.3.6.1.4.1.11096.6.1.1.3.2.1 | |||
| shareTable | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2 | not-accessible | A table containing the CIFS share configuration for the system. The number of entries in this table is given by the value of shareNumber. | |
| U32 shareUsers | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.4 | Unsigned32 | read-only | The number of users currently accessing the CIFS share. |
| STR shareWWN | 1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.5 | DisplayString | read-only | The world wide name (WWN) of the system drive the CIFS share is associated with. This will identify the File System on which the volume associated with the share is hosted. |
| sictrl | 1.3.6.1.4.1.11096.6.1.1.5.3.2 | |||
| INT sictrlAccessEnabled | 1.3.6.1.4.1.11096.6.1.1.5.3.2.1 | INTEGER | read-only | Indicates whether access to the SiCtrl (command line) interface is permitted or not. The setting disabled(2) indicates access to the SiCtrl interface will not be allowed regardless of any other configuration settings for this interface. |
| I32 sictrlAccessMaxConnections | 1.3.6.1.4.1.11096.6.1.1.5.3.2.6 | Integer32 | read-only | The maximum number of simultaneous connections which are allowed access to the SiCtrl interface. |
| I32 sictrlAccessPortNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.2.5 | Integer32 | read-only | The port number through which access to the SiCtrl interface is available (subject to any security restrictions). |
| INT sictrlAccessRestricted | 1.3.6.1.4.1.11096.6.1.1.5.3.2.2 | INTEGER | read-only | Indicates whether access to the SiCtrl interface is restricted to the set of hostnames or IP addresses configured in sictrlAccessRestrictedTable or unrestricted (such that any client may access the SiCtrl interface). NOTE: this setting controls the use of the SiCtrl access restricted table in that there may be entries in this table, but access to the interface will be allowed from any host if this variable is set to unrestricted(2). |
| sictrlAccessRestrictedEntry | 1.3.6.1.4.1.11096.6.1.1.5.3.2.4.1 | not-accessible | Restricted SiCtrl access information. | |
| STR sictrlAccessRestrictedHost | 1.3.6.1.4.1.11096.6.1.1.5.3.2.4.1.1 | DisplayString | read-only | The hostname or IP address of a client which has restricted access to the SiCtrl interface. |
| I32 sictrlAccessRestrictedNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.2.3 | Integer32 | read-only | The number of restricted SiCtrl access entries configured. |
| sictrlAccessRestrictedTable | 1.3.6.1.4.1.11096.6.1.1.5.3.2.4 | not-accessible | A table containing the hostnames or IP addresses of clients which have restricted access the SiCtrl interface. The number of entries in this table is given by the value of sictrlAccessRestrictedNumber. | |
| C64 sictrlCurrActiveSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.2.1 | Counter64 | read-only | The current number of active sessions made through the sictrl interface. This object is now obsolete. |
| C64 sictrlMaxSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.2.2 | Counter64 | read-only | The maximum number of simultaneous sessions ever made through the sictrl interface since power up. This object is now obsolete. |
| sictrlMgmntStats | 1.3.6.1.4.1.11096.6.1.1.5.9.2 | |||
| C64 sictrlRejectedSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.2.4 | Counter64 | read-only | The number of sessions which have been rejected through the sictrl interface since power up. Sessions may be rejected due to either the maximum allowed number of sessions being met or host access restrictions. Refer to the sictrl access variables. This object is now obsolete. |
| C64 sictrlTotalBytesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.2.8 | Counter64 | read-only | The total number of bytes received through the sictrl interface since power up. |
| C64 sictrlTotalBytesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.2.7 | Counter64 | read-only | The total number of bytes transmitted through the sictrl interface since power up. |
| C64 sictrlTotalFramesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.2.6 | Counter64 | read-only | The total number of frames received through the sictrl interface since power up. |
| C64 sictrlTotalFramesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.2.5 | Counter64 | read-only | The total number of frames transmitted through the sictrl interface since power up. |
| C64 sictrlTotalSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.2.3 | Counter64 | read-only | The total number of sessions made through the sictrl interface since power up. This object is now obsolete. |
| C64 singleBufferWriteCount | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.6 | Counter64 | read-only | The total number of single buffer writes for this system drive. |
| STR smtpAddr | 1.3.6.1.4.1.11096.6.1.1.5.5.1.1 | DisplayString | read-only | The IP address or hostname of the SMTP server. |
| INT smtpCritFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.1.2 | INTEGER | read-only | The frequency at which alerts within the critical category may be sent to the mail recipient(s). |
| INT smtpDiagUUencEnabled | 1.3.6.1.4.1.11096.6.1.1.5.5.1.8 | INTEGER | read-only | Indicates whether diagnostic emails are UU encoded or not. |
| INT smtpInfoFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.1.5 | INTEGER | read-only | The frequency at which alerts within the information category may be sent to the mail recipient(s). |
| smtpRecipEntry | 1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1 | not-accessible | Mail alert recipient information. This object is obsolete. Superceded by smtpRecipientEntry. | |
| STR smtpRecipientDisclose | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.3 | DisplayString | read-only | Disclose details in emails to this recipient. |
| STR smtpRecipientEmpty | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.4 | DisplayString | read-only | If there have been no events when summary emails are due then send empty emails. |
| smtpRecipientEntry | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1 | not-accessible | Mail alert recipient information. | |
| I32 smtpRecipientIndex | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.1 | Integer32 | read-only | A unique value for each configured mail recipient. |
| STR smtpRecipientName | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.2 | DisplayString | read-only | The email address of the recipient. |
| smtpRecipientTable | 1.3.6.1.4.1.11096.6.1.1.5.5.1.11 | not-accessible | A table containing a list of all configured mail alert recipients for this system, whether to disclose details in emails sent to the recipients and whether to send empty summary emails when due. The number of entries in this table is given by the value of smtpRecipNumber. | |
| I32 smtpRecipIndex | 1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1.1 | Integer32 | read-only | A unique value for each configured mail recipient. Its value ranges between 1 and the value of smtpRecipNumber. This table entry is obsolete. Superceded by smtpRecipientIndex. |
| STR smtpRecipName | 1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1.2 | DisplayString | read-only | The email address of the recipient. This table entry is obsolete. Superceded by smtpRecipientName. |
| I32 smtpRecipNumber | 1.3.6.1.4.1.11096.6.1.1.5.5.1.6 | Integer32 | read-only | The number of email recipients configured to receive alerts. |
| smtpRecipTable | 1.3.6.1.4.1.11096.6.1.1.5.5.1.7 | not-accessible | A table containing a list of all configured mail alert recipients for this system. The number of entries in this table is given by the value of smtpRecipNumber. This object is obsolete. Superceded by smptRecipientTable. | |
| INT smtpSevFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.1.3 | INTEGER | read-only | The frequency at which alerts within the severe category may be sent to the mail recipient(s). |
| smtpUndisclosedRecipEntry | 1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1 | not-accessible | Undisclosed mail alert recipient information. This table is obsolete. Undisclosed recipients are now grouped with disclosed recipients. | |
| I32 smtpUndisclosedRecipIndex | 1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1.1 | Integer32 | read-only | A unique value for each configured mail recipient which is to receive undisclosed alert information. Its value ranges between 1 and the value of smtpUndisclosedRecipNumber. This table entry is obsolete. Undisclosed recipients are now grouped with disclosed recipients. |
| STR smtpUndisclosedRecipName | 1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1.2 | DisplayString | read-only | The email address of the recipient. This object is obsolete. Undisclosed recipients are now grouped with disclosed recipients. |
| I32 smtpUndisclosedRecipNumber | 1.3.6.1.4.1.11096.6.1.1.5.5.1.9 | Integer32 | read-only | The number of email recipients configured to receive undisclosed alerts. This object is obsolete. Undisclosed recipients are now grouped with disclosed recipients. |
| smtpUndisclosedRecipTable | 1.3.6.1.4.1.11096.6.1.1.5.5.1.10 | not-accessible | A table containing a list of all configured mail alert recipients which are to receive undisclosed alerts for this system. The number of entries in this table is given by the value of smtpUndisclosedRecipNumber. This object is obsolete. Undisclosed recipients are now grouped with disclosed recipients. | |
| INT smtpWarnFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.1.4 | INTEGER | read-only | The frequency at which alerts within the warning category may be sent to the mail recipient(s). |
| snapshot | 1.3.6.1.4.1.11096.6.1.1.1.3.8 | |||
| snapshotRuleEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1 | not-accessible | Information about a snapshot rule. This object is now obsolete. | |
| U32 snapshotRuleLUN | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.3 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive the snapshot rule is associated with. This object is now obsolete. |
| STR snapshotRuleName | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.1 | DisplayString | read-only | The name of the snapshot rule. Each snapshot rule has a unique name. This object is now obsolete. |
| I32 snapshotRuleNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.8.1 | Integer32 | read-only | The number of snapshot rules which are configured for this system. |
| U32 snapshotRulePartitionID | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.4 | Unsigned32 | read-only | The partition ID of the volume the snapshot rule is associated with. This object is now obsolete. |
| I32 snapshotRuleQueueSize | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.5 | Integer32 | read-only | The number of snapshots to keep before the system deletes the oldest snapshot. This object is now obsolete. |
| snapshotRulesEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1 | not-accessible | Information about a snapshot rule. | |
| U32 snapshotRulesEVS | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.1 | Unsigned32 | read-only | The ID of the EVS on which this rule is defined. |
| STR snapshotRulesName | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.2 | DisplayString | read-only | The name of the snapshot rule. Each snapshot rule has a unique name. |
| I32 snapshotRulesQueueSize | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.3 | Integer32 | read-only | The number of snapshots to keep before the system deletes the oldest snapshot. |
| snapshotRulesTable | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5 | not-accessible | A table containing information about each snapshot rule. The number of entries in this table is given by the value of snapshotRuleNumber. | |
| STR snapshotRulesVolumeLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.4 | DisplayString | read-only | The label of the volume to which the snapshot rule relates. |
| snapshotRuleTable | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2 | not-accessible | A table containing information about each snapshot rule. The number of entries in this table is given by the value of snapshotRuleNumber. This object is now obsolete. | |
| STR snapshotRuleVolumeLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.6 | DisplayString | read-only | The label of the volume to which the snapshot rule relates. This object is now obsolete. |
| STR snapshotRuleWWN | 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.2 | DisplayString | read-only | The world wide name (WWN) of the system drive the snapshot rule is associated with. This object is now obsolete. |
| STR snapshotScheduleDateTimeSpec | 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.3 | DisplayString | read-only | The date and time specification for when this snapshot schedule will be run in cron format. This object is now obsolete. |
| snapshotScheduleEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1 | not-accessible | Information about a snapshot schedule. This object is now obsolete. | |
| I32 snapshotScheduleIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.2 | Integer32 | read-only | An identifier for this snapshot schedule entry. This identifier ranges from 1 to the number of snapshot schedules configured for the parent snapshot rule. This object is now obsolete. |
| I32 snapshotScheduleNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.8.3 | Integer32 | read-only | The number of snapshot schedules which are configured for this system. |
| STR snapshotScheduleRuleName | 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.1 | DisplayString | read-only | The name of the parent snapshot rule that this schedule is associated with. This object is now obsolete. |
| STR snapshotSchedulesDateTimeSpec | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.4 | DisplayString | read-only | The date and time specification for when this snapshot schedule will be run in cron format. |
| snapshotSchedulesEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1 | not-accessible | Information about a snapshot schedule. | |
| U32 snapshotSchedulesEVS | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.1 | Unsigned32 | read-only | The ID of the EVS on which this schedule is defined. |
| I32 snapshotSchedulesIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.3 | Integer32 | read-only | An identifier for this snapshot schedule entry. This identifier ranges from 1 to the number of snapshot schedules configured for the parent snapshot rule. |
| STR snapshotSchedulesRuleName | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.2 | DisplayString | read-only | The name of the parent snapshot rule that this schedule is associated with. |
| snapshotSchedulesTable | 1.3.6.1.4.1.11096.6.1.1.1.3.8.6 | not-accessible | A table containing information about each snapshot schedule. The number of entries in this table is given by the value of snapshotScheduleNumber. | |
| snapshotScheduleTable | 1.3.6.1.4.1.11096.6.1.1.1.3.8.4 | not-accessible | A table containing information about each snapshot schedule. The number of entries in this table is given by the value of snapshotScheduleNumber. This object is now obsolete. | |
| INT snmpAccessRestricted | 1.3.6.1.4.1.11096.6.1.1.5.6.2 | INTEGER | read-only | Indicates whether access to the SNMP agent is restricted to the set of hostnames or IP addresses configured in snmpAccessRestrictedTable or unrestricted (such that any manager may access the SNMP agent). NOTE : this setting controls the use of the SNMP access restricted table in that there may be entries in this table, but access to the interface will be allowed from any host if this variable is set to unrestricted(2). |
| snmpAccessRestrictedEntry | 1.3.6.1.4.1.11096.6.1.1.5.6.4.1 | not-accessible | Restricted SNMP access information. | |
| STR snmpAccessRestrictedHost | 1.3.6.1.4.1.11096.6.1.1.5.6.4.1.1 | DisplayString | read-only | The hostname or IP address of a manager which has restricted access to the SNMP agent. |
| I32 snmpAccessRestrictedNumber | 1.3.6.1.4.1.11096.6.1.1.5.6.3 | Integer32 | read-only | The number of configured restricted access entries. |
| snmpAccessRestrictedTable | 1.3.6.1.4.1.11096.6.1.1.5.6.4 | not-accessible | A table containing the hostnames or IP addresses of managers which have restricted access the SNMP agent. The number of entries in this table is given by the value of snmpAccessRestrictedNumber. | |
| snmpAgent | 1.3.6.1.4.1.11096.6.1.1.5.6 | |||
| snmpAlertConfig | 1.3.6.1.4.1.11096.6.1.1.5.5.3 | |||
| INT snmpCritFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.3.1 | INTEGER | read-only | The frequency at which alerts within the critical category may be sent to the SNMP recipient(s). |
| INT snmpInfoFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.3.4 | INTEGER | read-only | The frequency at which alerts within the information category may be sent to the SNMP recipient(s). |
| INT snmpProtocolMode | 1.3.6.1.4.1.11096.6.1.1.5.6.1 | INTEGER | read-only | Indicates the protocol to be used by the agent: bilingual(1) - the agent will process SNMP version 1 or SNMP version 2c requests. The protocol version used in the response will be that used in the request. version1(2) - the agent will only process requests made using SNMP version 1. The response will be sent using SNMP version 1. version2c(3) - the agent will only process requests made using SNMP version 2c. The response will be sent using SNMP version 2c. NOTE: requests made using a protocol version which does not comply with the agents protocol configuration will result in the badVersions statistic being incremented and the SNMP packet being discarded. |
| snmpRecipEntry | 1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1 | not-accessible | SNMP alert recipient information. This object is obsolete. It has been replaced by the object snmpTrapHostEntry. | |
| I32 snmpRecipIndex | 1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1.1 | Integer32 | read-only | A unique value for each configured SNMP alert recipient. Its value ranges between 1 and the value of snmpRecipNumber. This object is obsolete. It has been replaced by the object snmpTrapHostIndex. |
| STR snmpRecipName | 1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1.2 | DisplayString | read-only | The hostname or IP address of the SNMP manager to receive the alert. This object is obsolete. It has been replaced by the object snmpTrapHost. |
| I32 snmpRecipNumber | 1.3.6.1.4.1.11096.6.1.1.5.5.3.5 | Integer32 | read-only | The number of SNMP recipients configured to receive alerts. This object is obsolete. It has been replaced by the object snmpTrapHostNumber. |
| snmpRecipTable | 1.3.6.1.4.1.11096.6.1.1.5.5.3.6 | not-accessible | A table containing a list of all SNMP alert recipients for this system. The number of entries in this table is given by the value of snmpRecipNumber. This object is obsolete. It has been replaced by the table object snmpTrapHostTable. | |
| INT snmpSevFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.3.2 | INTEGER | read-only | The frequency at which alerts within the severe category may be sent to the SNMP recipient(s). |
| STR snmpTrapHost | 1.3.6.1.4.1.11096.6.1.1.5.6.6.1.2 | DisplayString | read-only | The hostname or IP address of a manager which is to receive traps from the SNMP agent. |
| snmpTrapHostEntry | 1.3.6.1.4.1.11096.6.1.1.5.6.6.1 | not-accessible | SNMP trap host information. | |
| I32 snmpTrapHostIndex | 1.3.6.1.4.1.11096.6.1.1.5.6.6.1.1 | Integer32 | read-only | A unique value for each trap host. Its value ranges from 1 to snmpTrapHostNumber. |
| I32 snmpTrapHostNumber | 1.3.6.1.4.1.11096.6.1.1.5.6.5 | Integer32 | read-only | The number of configured host destinations to receive traps from the SNMP agent. NOTE: the traps generated include alert events and: linkUp, coldStart AND authenticationFailure (which is controlled by the MIBII variable snmpEnableAuthenTraps). |
| snmpTrapHostTable | 1.3.6.1.4.1.11096.6.1.1.5.6.6 | not-accessible | A table containing the hostnames or IP addresses of managers which are to receive traps from the SNMP agent. The number of entries in this table is given by the value of snmpTrapHostNumber. | |
| INT snmpWarnFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.3.3 | INTEGER | read-only | The frequency at which alerts within the warning category may be sent to the SNMP recipient(s). |
| U32 spanCapacityTotalLower | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.4 | Unsigned32 | read-only | The low order 32-bits representing the span's capacity in bytes. (see also spanCapacityTotalUpper) |
| U32 spanCapacityTotalUpper | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.3 | Unsigned32 | read-only | The high order 32-bits representing the span's capacity in bytes. (see also spanCapacityTotalLower) |
| U32 spanCapacityUsedLower | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.6 | Unsigned32 | read-only | The low order 32-bits representing the span's used space in bytes. (see also spanCapacityUsedUpper) |
| U32 spanCapacityUsedUpper | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.5 | Unsigned32 | read-only | The high order 32-bits representing the span's used space in bytes. (see also spanCapacityUsedLower) |
| STR spanLabel | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.2 | DisplayString | read-only | The label for a span. |
| spanStats | 1.3.6.1.4.1.11096.6.1.1.6.4 | |||
| spanStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1 | not-accessible | Span statistical information. | |
| I32 spanStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.4.1 | Integer32 | read-only | The number of spans for which statistics are available. |
| I32 spanStatsSpanId | 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.1 | Integer32 | read-only | The unique identifier for this span, generated from the first system drive in the span. |
| spanStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.4.2 | not-accessible | A table of span statistics entries. | |
| U32 spanTier | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.2 | Unsigned32 | read-only | The tier type for this entry. |
| U32 spanTierCapacityTotalLower | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.5 | Unsigned32 | read-only | The low order 32-bits representing the tier's capacity in bytes. (see also spanTierCapacityTotalUpper) |
| U32 spanTierCapacityTotalUpper | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.4 | Unsigned32 | read-only | The high order 32-bits representing the tier's capacity in bytes. (see also spanTierCapacityTotalLower) |
| U32 spanTierCapacityUsedLower | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.7 | Unsigned32 | read-only | The low order 32-bits representing the tier's used space in bytes. (see also spanTierCapacityUsedUpper) |
| U32 spanTierCapacityUsedUpper | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.6 | Unsigned32 | read-only | The high order 32-bits representing the tier's used space in bytes. (see also spanTierCapacityUsedLower) |
| STR spanTierLabel | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.3 | DisplayString | read-only | The label for the span. |
| spanTierStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1 | not-accessible | Tiered span statistical information. | |
| I32 spanTierStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.4.3 | Integer32 | read-only | The number of spans using tiered storage for which statistics are available. |
| I32 spanTierStatsSpanId | 1.3.6.1.4.1.11096.6.1.1.6.4.4.1.1 | Integer32 | read-only | The permanent identifier for this span. |
| spanTierStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.4.4 | not-accessible | A table of tiered span statistics entries. | |
| C32 statFS2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.18 | Counter32 | read-only | The total number of 'StatFS' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| storage | 1.3.6.1.4.1.11096.6.1.1.1.3 | |||
| C64 stripeWriteCount | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.7 | Counter64 | read-only | The total number of stripe writes for this system drive. |
| C64 stripeWriteCumLatency | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.10 | Counter64 | read-only | The cumulative latency for stripe write operations in microseconds. |
| INT subComponentType | 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.2 | INTEGER | read-only | The sub-type of component. |
| C32 symLink2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.14 | Counter32 | read-only | The total number of 'Sym Link' calls received for NFS version 2 since power up. |
| C32 symLink3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.11 | Counter32 | read-only | The total number of 'SymLink' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| sys | 1.3.6.1.4.1.11096.6.1.1.1 | |||
| INT sysDriveCacheMode | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.7 | INTEGER | read-only | The caching mode employed by the RAID controller for this system drive. This object will only have the value unknown(3). |
| C64 sysDriveCapacity | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.5 | Counter64 | read-only | The capacity of the system drive in bytes. |
| sysDriveEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1 | not-accessible | Information about a system drive. | |
| I32 sysDriveIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.1 | Integer32 | read-only | An identifier for the system drive (system drive id). Its value ranges between 1 and the value of sysDriveNumber. |
| U32 sysDriveLUN | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.3 | Unsigned32 | read-only | The logical unit number (LUN) of the system drive. NOTE: upto 8 system drives can exist under a single RAID controller. LUNs range from 0 to 7. |
| I32 sysDriveNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.4.1 | Integer32 | read-only | The number of accessible system drives. NOTE: A system drive is a single logical drive which is created and managed by a RAID controller. It comprises of a number of physical drives, each of which contribute to the total storage capability of the system drive. |
| INT sysDriveRaidLevel | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.6 | INTEGER | read-only | The configured RAID level of the system drive. NOTE : jBOD(6) - means just a bunch of disks. |
| INT sysDriveStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.4 | INTEGER | read-only | The status of the system drive. online(1) - the system drive is accessible through the fibre channel interface. corrupt(2) - the system drives master boot record is corrupt. failed(3) - the system drive has failed and is no longer accessible through the fibre channel interface. notPresent(4) - device no longer present. disconnected(5) - device is present but not accessible by the controller offline(6) - all ports are offline initializing(7) - not accessible until initialization phase has completed formatting(8) - device is formatting unknown(9) - unknown device status This object will only have the value unknown(9). |
| sysDriveTable | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2 | not-accessible | A table containing information about each accessible system drive. The number of entries in this table is given by the value of sysDriveNumber. | |
| STR sysDriveWWN | 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.2 | DisplayString | read-only | The world wide name (WWN) of the system drive. |
| systemDrives | 1.3.6.1.4.1.11096.6.1.1.1.3.4 | |||
| systemDriveStats | 1.3.6.1.4.1.11096.6.1.1.6.2 | |||
| U32 systemDriveStatsCnIndex | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.1 | Unsigned32 | read-only | The cluster node for this value. |
| systemDriveStatsEntry | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1 | not-accessible | System drive statistical information. | |
| I32 systemDriveStatsNumber | 1.3.6.1.4.1.11096.6.1.1.6.2.1 | Integer32 | read-only | The number of system drives for which statistics are available. If enhanced statistics gathering is not enabled, this value will be zero. See the command enhanced-perf-stats. |
| U32 systemDriveStatsSdId | 1.3.6.1.4.1.11096.6.1.1.6.2.2.1.2 | Unsigned32 | read-only | The system drive identifier. |
| systemDriveStatsTable | 1.3.6.1.4.1.11096.6.1.1.6.2.2 | not-accessible | A table of system drive statistics entries. If enhanced statistics gathering is not enabled, this table will be empty. See the command enhanced-perf-stats. | |
| STR systemUserAccessLevel | 1.3.6.1.4.1.11096.6.1.1.5.1.2.1.2 | DisplayString | read-only | The access level granted to the system user. |
| systemUserEntry | 1.3.6.1.4.1.11096.6.1.1.5.1.2.1 | not-accessible | System user information. | |
| STR systemUserName | 1.3.6.1.4.1.11096.6.1.1.5.1.2.1.1 | DisplayString | read-only | The login name of the system user. |
| I32 systemUserNumber | 1.3.6.1.4.1.11096.6.1.1.5.1.1 | Integer32 | read-only | The number of users which are configured to access the system through web and telnet via password authentication. NOTE: this does not include users which have higher level access than supervisor. |
| systemUsers | 1.3.6.1.4.1.11096.6.1.1.5.1 | |||
| systemUserTable | 1.3.6.1.4.1.11096.6.1.1.5.1.2 | not-accessible | A table containing a list of all users configured to access the system through web and telnet via password authentication. NOTE: this does not include users which have higher level access than supervisor. The number of entries in this table is given by the value of systemUserNumber. | |
| I32 tapeDriveAutoChangerIndex | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.2 | Integer32 | read-only | The index of the auto changer in the autoChangerTable to which this tape drive is connected or -1 if it is not associated with an auto changer. |
| STR tapeDriveDeviceName | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.3 | DisplayString | read-only | The device name of the tape drive. |
| tapeDriveEntry | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1 | not-accessible | Tape drive information. | |
| STR tapeDriveEVS | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.6 | DisplayString | read-only | The Enterprise Virtual Server to which this tape drive is assigned. |
| I32 tapeDriveIndex | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.1 | Integer32 | read-only | A unique value for each tape drive. Its value ranges between 1 and the value of tapeDriveNumber. |
| STR tapeDriveLocation | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.5 | DisplayString | read-only | The location of the tape drive. |
| I32 tapeDriveNumber | 1.3.6.1.4.1.11096.6.1.1.4.2.3 | Integer32 | read-only | The number of tape drives that NDMP has detected. |
| STR tapeDriveSerialNumber | 1.3.6.1.4.1.11096.6.1.1.4.2.4.1.4 | DisplayString | read-only | The serial number of the tape drive. |
| tapeDriveTable | 1.3.6.1.4.1.11096.6.1.1.4.2.4 | not-accessible | A table containing a list of all tape drives NDMP has detected. The number of entries in this table is given by the value of tapeDriveNumber. | |
| U32 tconXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.33 | Unsigned32 | read-only | The total number of 'TconX' CIFS calls received since power up. |
| INT tcpAllSubnetsMTU | 1.3.6.1.4.1.11096.6.1.1.2.4.5 | INTEGER | read-only | Use the same IP MTU (1500 bytes) for all subnets of the connected network. enabled(1) - use the same MTU for all subnets. disabled(2) - DONT use the same MTU for all subnets. |
| U32 tcpArpCacheTimeout | 1.3.6.1.4.1.11096.6.1.1.2.4.1 | Unsigned32 | read-only | The ARP cache timeout in seconds. |
| INT tcpBroadCastUsingZero | 1.3.6.1.4.1.11096.6.1.1.2.4.2 | INTEGER | read-only | Broadcast using IP address 0. enabled(1) - broadcast using IP address 0. disabled(2) - DONT broadcast using IP address 0. |
| U32 tcpDefWnd | 1.3.6.1.4.1.11096.6.1.1.2.5.1 | Unsigned32 | read-only | Default window size in bytes. |
| INT tcpDelayedAcks | 1.3.6.1.4.1.11096.6.1.1.2.5.2 | INTEGER | read-only | Indicates whether the delayed ack setting is enabled or not. |
| C64 tcpFailedInConns | 1.3.6.1.4.1.11096.6.1.1.2.2.4 | Counter64 | read-only | The number of failed incoming TCP/IP connections. |
| C64 tcpFailedOutConns | 1.3.6.1.4.1.11096.6.1.1.2.2.5 | Counter64 | read-only | The number of failed outgoing TCP/IP connections. |
| INT tcpFastRetxFastRecovery | 1.3.6.1.4.1.11096.6.1.1.2.5.9 | INTEGER | read-only | Indicates whether the fast retx fast recovery setting is enabled or not. |
| INT tcpIgnoreICMPEcho | 1.3.6.1.4.1.11096.6.1.1.2.4.3 | INTEGER | read-only | Ignore ICMP echo requests. enabled(1) - ignore ICMP echo requests. disabled(2) - DONT ignore ICMP echo requests. |
| C64 tcpInInvChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.20 | Counter64 | read-only | The total number of received TCP packets with invalid checksums. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpInOversizeSegmentErrs | 1.3.6.1.4.1.11096.6.1.1.2.2.19 | Counter64 | read-only | The total number of received segments which are oversized This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpInSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.7 | Counter64 | read-only | The number of segments received. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| INT tcpIntelliSeg | 1.3.6.1.4.1.11096.6.1.1.2.5.13 | INTEGER | read-only | Indicates whether the intelliseg setting is enabled or not. |
| C64 tcpInvalidSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.4 | Counter64 | read-only | The number of invalid segments. |
| C64 tcpInvSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.9 | Counter64 | read-only | The number of invalid segments. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.14 | Counter64 | read-only | The total number of IP packets received with invalid checksums. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvHdrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.13 | Counter64 | read-only | The total number of IP packets received with invalid header fields. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvNUcastAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.15 | Counter64 | read-only | The total number of IP packets received with broadcast/multicast destination address errors. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvOptionPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.18 | Counter64 | read-only | The total number of IP packets received with invalid options. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.12 | Counter64 | read-only | The total number of invalid IP packets received. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvSrcAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.17 | Counter64 | read-only | The total number of IP packets received with source address errors. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInInvUcastAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.16 | Counter64 | read-only | The total number of IP packets received with unicast destination address errors. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPInPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.10 | Counter64 | read-only | The total number of IP packets received. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPMiscBadSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.14 | Counter64 | read-only | The total number of invalid IP packets received. The faults include invalid checksum, unicast and non-unicast address, and option. |
| C64 tcpIPOutPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.11 | Counter64 | read-only | The total number of IP packets transmitted. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpIPRxInvalidChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.9 | Counter64 | read-only | The total number of IP packets received with invalid checksums. This object has been obsolete. It is now included in the object tcpIPMiscBadSegements. |
| C64 tcpIPRxInvalidHdrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.8 | Counter64 | read-only | The total number of IP packets received with invalid header fields. |
| C64 tcpIPRxInvalidNUcastAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.10 | Counter64 | read-only | The total number of IP packets received with broadcast/multicast destination address errors. This object has been obsolete. It is now included in the object tcpIPMiscBadSegements. |
| C64 tcpIPRxInvalidOptionPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.13 | Counter64 | read-only | The total number of IP packets received with invalid options. This object has been obsolete. It is now included in the object tcpIPMiscBadSegements. |
| C64 tcpIPRxInvalidPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.7 | Counter64 | read-only | The total number of invalid IP packets received. |
| C64 tcpIPRxInvalidSrcAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.12 | Counter64 | read-only | The total number of IP packets received with source address errors. |
| C64 tcpIPRxInvalidUcastAddrPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.11 | Counter64 | read-only | The total number of IP packets received with unicast destination address errors. This object has been obsolete. It is now included in the object tcpIPMiscBadSegements. |
| C64 tcpIPRxPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.6 | Counter64 | read-only | The total number of invalid IP packets received. |
| tcpipStats | 1.3.6.1.4.1.11096.6.1.1.2.2 | |||
| C64 tcpIPTxPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.5 | Counter64 | read-only | The total number of IP packets transmitted. |
| INT tcpKeepAlive | 1.3.6.1.4.1.11096.6.1.1.2.4.6 | INTEGER | read-only | TCP keep alive option. enabled(1) - use TCP keep alive. disabled(2) - DONT use TCP keep alive. |
| U32 tcpKeepAliveTimeout | 1.3.6.1.4.1.11096.6.1.1.2.4.7 | Unsigned32 | read-only | The TCP keep alive timeout in seconds. |
| C64 tcpLinkPacketDrops | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.17 | Counter64 | read-only | The total number of packet dropped by the link layer. This object has been obsolete. It is now included in the object tcpRxInvalidSegments. |
| C64 tcpLinkPktDrops | 1.3.6.1.4.1.11096.6.1.1.2.2.21 | Counter64 | read-only | The total number of packet dropped by the link layer. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C32 tcpMaxOpenConns | 1.3.6.1.4.1.11096.6.1.1.2.2.2 | Counter32 | read-only | The maximum number of open TCP/IP connections. |
| INT tcpNagle | 1.3.6.1.4.1.11096.6.1.1.2.5.5 | INTEGER | read-only | Indicates whether the nagle setting is enabled or not. |
| INT tcpOffSubnetMTU | 1.3.6.1.4.1.11096.6.1.1.2.4.4 | INTEGER | read-only | The IP MTU for off-subnet transmits in bytes. |
| INT tcpOffSubnetSlowStart | 1.3.6.1.4.1.11096.6.1.1.2.5.11 | INTEGER | read-only | Indicates whether the off subnet slow start setting is enabled or not. |
| INT tcpOldAckStrategy | 1.3.6.1.4.1.11096.6.1.1.2.5.7 | INTEGER | read-only | Indicates whether the old ack strategy setting is enabled or not. |
| INT tcpOldPushStrategy | 1.3.6.1.4.1.11096.6.1.1.2.5.10 | INTEGER | read-only | Indicates whether the old push strategy setting is enabled or not. |
| C32 tcpOpenConns | 1.3.6.1.4.1.11096.6.1.1.2.2.1 | Counter32 | read-only | The number of currently open TCP/IP connections. |
| C64 tcpOutSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.6 | Counter64 | read-only | The number of segments transmitted. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpReOutSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.8 | Counter64 | read-only | The number of retransmitted segments. This object is obsolete. It now forms part of the table tcpStatisticsTable. |
| C64 tcpReTxSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.3 | Counter64 | read-only | The number of retransmitted segments. |
| C64 tcpRxInvalidChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.16 | Counter64 | read-only | The total number of received segments which are oversized. |
| C64 tcpRxOversizeSegmentErrs | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.15 | Counter64 | read-only | The total number of received segments which are oversized. This object has been obsolete. It is now included in the object tcpRxInvalidSegments. |
| C64 tcpRxSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.2 | Counter64 | read-only | The number of segments received. |
| INT tcpSillyWindowAvoid | 1.3.6.1.4.1.11096.6.1.1.2.5.6 | INTEGER | read-only | Indicates whether the silly window avoid setting is enabled or not. |
| INT tcpSlowStartCA | 1.3.6.1.4.1.11096.6.1.1.2.5.3 | INTEGER | read-only | Indicates whether the slow start ca setting is enabled or not. |
| INT tcpSlowStartOnIdle | 1.3.6.1.4.1.11096.6.1.1.2.5.8 | INTEGER | read-only | Indicates whether the slow start on idle setting is enabled or not. |
| INT tcpSSRestartDoubleMSS | 1.3.6.1.4.1.11096.6.1.1.2.5.4 | INTEGER | read-only | Indicates whether the SS restart double mss setting is enabled or not. |
| tcpStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1 | not-accessible | TCP statistics for ethernet interfaces. | |
| tcpStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.2.2.22 | not-accessible | A table of TCP statistics for ethernet interfaces. The number of entries in this table is given by the value of ifNumber. | |
| C64 tcpTotalOpenConns | 1.3.6.1.4.1.11096.6.1.1.2.2.3 | Counter64 | read-only | The total number of TCP/IP connections ever opened (cumulative). |
| C64 tcpTxSegments | 1.3.6.1.4.1.11096.6.1.1.2.2.22.1.1 | Counter64 | read-only | The number of segments transmitted. |
| INT tcpUDPCheckSumGen | 1.3.6.1.4.1.11096.6.1.1.2.5.12 | INTEGER | read-only | Indicates whether the UDP checksum generation setting is enabled or not. |
| U32 tdisCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.29 | Unsigned32 | read-only | The total number of 'Tdis' CIFS calls received since power up. |
| telnet | 1.3.6.1.4.1.11096.6.1.1.5.3.3 | |||
| INT telnetAccessEnabled | 1.3.6.1.4.1.11096.6.1.1.5.3.3.1 | INTEGER | read-only | Indicates whether access to the telnet interface is permitted or not. The setting disabled(2) indicates access to the telnet interface will not be allowed regardless of any other configuration settings for this interface. |
| I32 telnetAccessMaxConnections | 1.3.6.1.4.1.11096.6.1.1.5.3.3.6 | Integer32 | read-only | The maximum number of simultaneous connections which are allowed access to the telnet interface. |
| I32 telnetAccessPortNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.3.5 | Integer32 | read-only | The port number through which access to the telnet interface is available (subject to any security restrictions). |
| INT telnetAccessRestricted | 1.3.6.1.4.1.11096.6.1.1.5.3.3.2 | INTEGER | read-only | Indicates whether access to the telnet interface is restricted to the set of hostnames or IP addresses configured in telnetAccessRestrictedTable or unrestricted (such that any client may access the telnet interface). NOTE: this setting controls the use of the telnet access restricted table in that there may be entries in this table, but access to the interface will be allowed from any host if this variable is set to unrestricted(2). |
| telnetAccessRestrictedEntry | 1.3.6.1.4.1.11096.6.1.1.5.3.3.4.1 | not-accessible | Restricted telnet access information. | |
| STR telnetAccessRestrictedHost | 1.3.6.1.4.1.11096.6.1.1.5.3.3.4.1.1 | DisplayString | read-only | The hostname or IP address of a client which has restricted access to the telnet interface. |
| I32 telnetAccessRestrictedNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.3.3 | Integer32 | read-only | The number of restricted telnet access entries configured. |
| telnetAccessRestrictedTable | 1.3.6.1.4.1.11096.6.1.1.5.3.3.4 | not-accessible | A table containing the hostnames or IP addresses of clients which have restricted access the telnet interface. The number of entries in this table is given by the value of telnetAccessRestrictedNumber. | |
| C64 telnetCurrActiveSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.3.1 | Counter64 | read-only | The current number of active sessions made through the telnet interface. |
| C64 telnetMaxSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.3.2 | Counter64 | read-only | The maximum number of simultaneous sessions ever made through the telnet interface since power up. |
| telnetMgmntStats | 1.3.6.1.4.1.11096.6.1.1.5.9.3 | |||
| C64 telnetRejectedSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.3.4 | Counter64 | read-only | The number of sessions which have been rejected through the telnet interface since power up. Sessions may be rejected due to either the maximum allowed number of sessions being met or host access restrictions. Refer to the telnet access variables. |
| C64 telnetTotalBytesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.3.8 | Counter64 | read-only | The total number of bytes received through the telnet interface since power up. |
| C64 telnetTotalBytesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.3.7 | Counter64 | read-only | The total number of bytes transmitted through the telnet interface since power up. |
| C64 telnetTotalFramesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.3.6 | Counter64 | read-only | The total number of frames received through the telnet interface since power up. |
| C64 telnetTotalFramesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.3.5 | Counter64 | read-only | The total number of frames transmitted through the telnet interface since power up. |
| C64 telnetTotalSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.3.3 | Counter64 | read-only | The total number of sessions made through the telnet interface since power up. |
| I32 temperatureSensorClusterNode | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.1 | Integer32 | read-only | The ID of the Cluster Node in which the fan is located. |
| I32 temperatureSensorCReading | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.4 | Integer32 | read-only | A measurement of the temperature taken by the sensor in degrees Celsius. |
| temperatureSensorEntry | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1 | not-accessible | Information collected from each temperature sensor located in the silicon server unit. | |
| I32 temperatureSensorFReading | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.5 | Integer32 | read-only | A measurement of the temperature taken by the sensor in degrees Fahrenheit. |
| I32 temperatureSensorIndex | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.2 | Integer32 | read-only | A unique value for each temperature sensor on a cluster node. |
| I32 temperatureSensorNumber | 1.3.6.1.4.1.11096.6.1.1.1.2.1.8 | Integer32 | read-only | The number of temperature sensors (regardless of their current state) present in all silicon server units in the cluster. |
| INT temperatureSensorStatus | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.3 | INTEGER | read-only | Indicates whether the temperature measurement is within the expected range. ok(1) - the reading is within the expected range. tempWarning(2) - the reading is outside of the expected range, but not severe. tempSevere(3) - The reading is severely outside the expected range. tempSensoreFailed(4) - the sensor unit has failed. The measured temperature is invalid tempSensorWarning(5) - the sensor unit is in a warning condition. unknown(6) - the status of the sensor could not be determined. |
| temperatureSensorTable | 1.3.6.1.4.1.11096.6.1.1.1.2.1.9 | not-accessible | A table containing information gathered by temperature sensors located in all silicon server units in the cluster. The number of entries in this table is given by the value of temperatureSensorNumber. | |
| C64 totalRetransmits | 1.3.6.1.4.1.11096.6.1.1.6.7.2.1.4 | Counter64 | read-only | The total number of retransmits for the cluster node. |
| U32 trans2Calls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.27 | Unsigned32 | read-only | The total number of 'Trans2' CIFS calls received since power up. |
| U32 transCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.21 | Unsigned32 | read-only | The total number of 'Trans' CIFS calls received since power up. |
| C64 udpInInvChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.3.2 | Counter64 | read-only | The total number of UDP packets received with invalid checksums. This object is obsolete. It now forms part of the table udpStatisticsTable. |
| C64 udpInShortPkts | 1.3.6.1.4.1.11096.6.1.1.2.3.1 | Counter64 | read-only | The total number of short UDP packets received. This object is obsolete. It now forms part of the table udpStatisticsTable. |
| C64 udpRxInvChksumPkts | 1.3.6.1.4.1.11096.6.1.1.2.3.3.1.2 | Counter64 | read-only | The total number of UDP packets received with invalid checksums. |
| C64 udpRxShortPkts | 1.3.6.1.4.1.11096.6.1.1.2.3.3.1.1 | Counter64 | read-only | The total number of short UDP packets received. |
| udpStatisticsEntry | 1.3.6.1.4.1.11096.6.1.1.2.3.3.1 | not-accessible | UDP statistics for ethernet interfaces. | |
| udpStatisticsTable | 1.3.6.1.4.1.11096.6.1.1.2.3.3 | not-accessible | A table of UDP statistics for ethernet interfaces. The number of entries in this table is given by the value of ifNumber. | |
| udpStats | 1.3.6.1.4.1.11096.6.1.1.2.3 | |||
| U32 ulogoffXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.32 | Unsigned32 | read-only | The total number of 'UlogoffX' CIFS calls received since power up. |
| U32 unlinkCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.9 | Unsigned32 | read-only | The total number of 'Unlink' CIFS calls received since power up. |
| I32 utcOffset | 1.3.6.1.4.1.11096.6.1.1.1.2.2.3 | Integer32 | read-only | The local time zone offset setting for the server expressed as a number of minutes. NOTE: a negative value indicates a time zone west of UTC. |
| utilization | 1.3.6.1.4.1.11096.6.1.1.6.1 | |||
| STR verinfoHw | 1.3.6.1.4.1.11096.6.1.1.5.7.2 | DisplayString | read-only | Hardware release information. |
| STR verinfoSw | 1.3.6.1.4.1.11096.6.1.1.5.7.1 | DisplayString | read-only | Systems software release information. |
| I32 verModBuildState | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.6 | Integer32 | read-only | Module build state. |
| I32 verModCardID | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.14 | Integer32 | read-only | Card identity. |
| I32 verModCardRev | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.15 | Integer32 | read-only | Card revision number. |
| verModEntry | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1 | not-accessible | Module version information. | |
| STR verModFirstDate | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.9 | DisplayString | read-only | First Date. |
| I32 verModGlueRev | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.16 | Integer32 | read-only | Glue revision number. |
| STR verModHw | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.4 | DisplayString | read-only | Module hardware version. |
| INT verModIndex | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.1 | INTEGER | read-only | An identifier for each board. tcp(1) - the tcp board. fsb(2) - the filesystem board. fcp(3) - the fibre channel board. |
| STR verModKernel | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.3 | DisplayString | read-only | Module kernel version. |
| STR verModLoader | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.2 | DisplayString | read-only | Module loader version. |
| I32 verModMTDSFailures | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.11 | Integer32 | read-only | Manufacturing and test number of failures. |
| STR verModMTDSLastFailure | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.10 | DisplayString | read-only | Last Failure date for MTDS. |
| STR verModMTDSLastPass | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.12 | DisplayString | read-only | Manufacturing and test last pass date. |
| I32 verModMTDSPasses | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.13 | Integer32 | read-only | Manufacturing and test number of passes. |
| I32 verModNumber | 1.3.6.1.4.1.11096.6.1.1.5.7.3 | Integer32 | read-only | The number of modules. |
| I32 verModSerial | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.5 | Integer32 | read-only | Module serial number. |
| verModTable | 1.3.6.1.4.1.11096.6.1.1.5.7.4 | not-accessible | A table containing a list of version information for each module within the system. The number of entries in this table is given by the value of verModNumber. | |
| STR verModUniq0 | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.7 | DisplayString | read-only | EEPROM Uniq value 0. |
| STR verModUniq1 | 1.3.6.1.4.1.11096.6.1.1.5.7.4.1.8 | DisplayString | read-only | EEPROM Uniq value 1. |
| versions | 1.3.6.1.4.1.11096.6.1.1.5.7 | |||
| I32 virtualVolumeCriticalAlert | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.7 | Integer32 | read-only | If the quota facility is enabled and the storage space used exceeds this percentage of the virtual volumes limit (virtualVolumeLimit) a critical alert will be generated. This object has been obsolete. |
| virtualVolumeEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1 | not-accessible | Information about a virtual volume. This object has been obsolete. | |
| INT virtualVolumeHardLimitEnabled | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.8 | INTEGER | read-only | If the quota facility is enabled, this value indicates whether the file system should enforce a hard limit on the quota such that if the virtual volumes limit (virtualVolumeLimit) is reached, the user will not be able to create or modify any file which would cause the quota to be exceeded. enabled(1) - quota hard limit is enabled. disabled(2) - quota hard limit is disabled. This object has been obsolete. |
| STR virtualVolumeLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.3 | DisplayString | read-only | The label assigned to the virtual volume by a user for identification purposes. This object has been obsolete. |
| C64 virtualVolumeLimit | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.5 | Counter64 | read-only | The maximum size this virtual volume is limited to in bytes for the purposes of quota checking. This object has been obsolete. |
| I32 virtualVolumeNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.7.1 | Integer32 | read-only | The number of virtual volumes which are currently accessible. NOTE: a virtual volume is only accessible if its associated parent volume is mounted. This object has been obsolete. |
| U32 virtualVolumePartitionID | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.2 | Unsigned32 | read-only | The partition ID of the parent volume of this virtual volume. The virtualVolumeSysDriveIndex and this value may be used to index the volumeTable in order to establish the parent volume. This object has been obsolete. |
| C64 virtualVolumeQuotaBytesUsed | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.9 | Counter64 | read-only | If the quota facility is enabled this value is the number of bytes used from this quota otherwise it will be set 0. This object has been obsolete. |
| INT virtualVolumeQuotaEnabled | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.4 | INTEGER | read-only | Indicates whether the virtual volume quota checking facility is enabled or not. enabled(1) - quota checking is enabled. disabled(2) - quota checking is disabled. This object has been obsolete. |
| I32 virtualVolumeQuotaPercentageUsed | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.10 | Integer32 | read-only | If the quota facility is enabled this value is the percentage of the quota used otherwise it will set to 0. This object has been obsolete. |
| virtualVolumes | 1.3.6.1.4.1.11096.6.1.1.1.3.7 | |||
| I32 virtualVolumeSysDriveIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.1 | Integer32 | read-only | The parent system drive of the virtual volume. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex. This object has been obsolete. |
| virtualVolumeTable | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2 | not-accessible | A table containing information about each virtual volume. The number of entries in this table is given by the value of virtualVolumeNumber. This object has been obsolete. | |
| I32 virtualVolumeWarningAlert | 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.6 | Integer32 | read-only | If the quota facility is enabled and the storage space used exceeds this percentage of the virtual volumes limit (virtualVolumeLimit) a warning alert will be generated. This object has been obsolete. |
| C64 volumeCapacity | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.5 | Counter64 | read-only | The volumes capacity in bytes. |
| STR volumeEnterpriseVirtualServer | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.7 | DisplayString | read-only | The name of the Enterprise Virtual Server to which this volume is assigned. |
| volumeEntry | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1 | not-accessible | Information about a volume. | |
| C64 volumeFreeCapacity | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.6 | Counter64 | read-only | The remaining free volume capacity in bytes. NOTE: This value is 0 if the volume is not mounted. |
| STR volumeLabel | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.3 | DisplayString | read-only | The label assigned to the volume by a user for identification purposes. NOTE: If a label has not been assigned to the volume, this value will be a zero length string. |
| I32 volumeNumber | 1.3.6.1.4.1.11096.6.1.1.1.3.5.1 | Integer32 | read-only | The number of volumes which are known to the system. |
| U32 volumePartitionID | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.2 | Unsigned32 | read-only | The partition ID of the volume. NOTE: this is the offset from the start of the system drive at which the volume starts. |
| volumes | 1.3.6.1.4.1.11096.6.1.1.1.3.5 | |||
| INT volumeStatus | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.4 | INTEGER | read-only | The status of the volume. unformatted(1) - the volume does NOT contain a filesystem. mounted(2) - the volume contains a file system and may be being accessed by users. formatted(3) - the volume contains a filesystem, but is not accessible by users as it is not mounted. needsChecking(4) - the filesystem has some errors and cannot be mounted. Its must be checked and fixed before it can be accessed by users. |
| I32 volumeSysDriveIndex | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.1 | Integer32 | read-only | The system drive on which the volume is stored. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex. |
| volumeTable | 1.3.6.1.4.1.11096.6.1.1.1.3.5.2 | not-accessible | A table containing information about each volume known to the system. The number of entries in this table is given by the value of volumeNumber. | |
| web | 1.3.6.1.4.1.11096.6.1.1.5.3.1 | |||
| INT webAccessEnabled | 1.3.6.1.4.1.11096.6.1.1.5.3.1.1 | INTEGER | read-only | Indicates whether access to the web (GUI) interface is permitted or not. The setting disabled(2) indicates access to the web interface will not be allowed regardless of any other configuration settings for this interface. |
| I32 webAccessMaxConnections | 1.3.6.1.4.1.11096.6.1.1.5.3.1.6 | Integer32 | read-only | The maximum number of simultaneous connections which are allowed access to the web interface. This object is now obsolete. |
| I32 webAccessPortNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.1.5 | Integer32 | read-only | The port number through which access to the web interface is available (subject to any security restrictions). This object is now obsolete. |
| INT webAccessRestricted | 1.3.6.1.4.1.11096.6.1.1.5.3.1.2 | INTEGER | read-only | Indicates whether access to the web interface is restricted to the set of hostnames or IP addresses configured in webAccessRestrictedTable or unrestricted (such that any client may access the web interface). NOTE : this setting controls the use of the web access restricted table in that there may be entries in this table, but access to the interface will be allowed from any host if this variable is set to unrestricted(2). This object is now obsolete. |
| webAccessRestrictedEntry | 1.3.6.1.4.1.11096.6.1.1.5.3.1.4.1 | not-accessible | Restricted web access information. This object is now obsolete. | |
| STR webAccessRestrictedHost | 1.3.6.1.4.1.11096.6.1.1.5.3.1.4.1.1 | DisplayString | read-only | The hostname or IP address of a client which has restricted access to the web interface. This object is now obsolete. |
| I32 webAccessRestrictedNumber | 1.3.6.1.4.1.11096.6.1.1.5.3.1.3 | Integer32 | read-only | The number of restricted web access entries configured. This object is now obsolete. |
| webAccessRestrictedTable | 1.3.6.1.4.1.11096.6.1.1.5.3.1.4 | not-accessible | A table containing the hostnames or IP addresses of clients which have restricted access to the web interface. The number of entries in this table is given by the value of webAccessRestrictedNumber. This object is now obsolete. | |
| C64 webCurrActiveSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.1.1 | Counter64 | read-only | The current number of active sessions made through the web interface. This object is now obsolete. |
| C64 webMaxSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.1.2 | Counter64 | read-only | The maximum number of simultaneous sessions ever made through the web interface since power up. This object is now obsolete. |
| webMgmntStats | 1.3.6.1.4.1.11096.6.1.1.5.9.1 | |||
| C64 webRejectedSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.1.4 | Counter64 | read-only | The number of sessions which have been rejected through the web interface since power up. Sessions may be rejected due to either the maximum allowed number of sessions being met or host access restrictions. Refer to the web access variables. This object is now obsolete. |
| C64 webTotalBytesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.1.8 | Counter64 | read-only | The total number of bytes received through the web interface since power up. This object is now obsolete. |
| C64 webTotalBytesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.1.7 | Counter64 | read-only | The total number of bytes transmitted through the web interface since power up. This object is now obsolete. |
| C64 webTotalFramesRX | 1.3.6.1.4.1.11096.6.1.1.5.9.1.6 | Counter64 | read-only | The total number of frames received through the web interface since power up. This object is now obsolete. |
| C64 webTotalFramesTX | 1.3.6.1.4.1.11096.6.1.1.5.9.1.5 | Counter64 | read-only | The total number of frames transmitted through the web interface since power up. This object is now obsolete. |
| C64 webTotalSessions | 1.3.6.1.4.1.11096.6.1.1.5.9.1.3 | Counter64 | read-only | The total number of sessions made through the web interface since power up. This object is now obsolete. |
| winAlertConfig | 1.3.6.1.4.1.11096.6.1.1.5.5.2 | |||
| INT winCritFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.2.1 | INTEGER | read-only | The frequency at which alerts within the critical category may be sent to the windows popup recipient(s). This object is now obsolete. |
| INT winInfoFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.2.4 | INTEGER | read-only | The frequency at which alerts within the information category may be sent to the windows popup recipient(s). This object is now obsolete. |
| winRecipEntry | 1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1 | not-accessible | Windows alert recipient information. This object is now obsolete. | |
| I32 winRecipIndex | 1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1.1 | Integer32 | read-only | A unique value for each configured windows popup recipient. Its value ranges between 1 and the value of winRecipNumber. This object is now obsolete. |
| STR winRecipName | 1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1.2 | DisplayString | read-only | The name of the windows popup recipient. This object is now obsolete. |
| I32 winRecipNumber | 1.3.6.1.4.1.11096.6.1.1.5.5.2.5 | Integer32 | read-only | The number of windows popup recipients configured to receive alerts. This object is now obsolete. |
| winRecipTable | 1.3.6.1.4.1.11096.6.1.1.5.5.2.6 | not-accessible | A table containing a list of all configured windows popup alert recipients for this system. The number of entries in this table is given by the value of winRecipNumber. This object is now obsolete. | |
| wins | 1.3.6.1.4.1.11096.6.1.1.2.6.1 | |||
| INT winSevFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.2.2 | INTEGER | read-only | The frequency at which alerts within the severe category may be sent to the windows popup recipient(s). This object is now obsolete. |
| IP winsPrimaryIpAddr | 1.3.6.1.4.1.11096.6.1.1.2.6.1.1 | IpAddress | read-only | The IP address of the primary wins server if enabled or 0.0.0.0 if not enabled. |
| IP winsSecondaryIpAddr | 1.3.6.1.4.1.11096.6.1.1.2.6.1.2 | IpAddress | read-only | The IP address of the secondary wins server if enabled or 0.0.0.0 if not enabled. |
| INT winWarnFreq | 1.3.6.1.4.1.11096.6.1.1.5.5.2.3 | INTEGER | read-only | The frequency at which alerts within the warning category may be sent to the windows popup recipient(s). This object is now obsolete. |
| C32 write2 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.9 | Counter32 | read-only | The total number of 'Write' calls received for NFS version 2 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| C32 write3 | 1.3.6.1.4.1.11096.6.1.1.3.3.6.2.8 | Counter32 | read-only | The total number of 'Write' calls received for NFS version 3 since power up. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 writeBrawCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.19 | Unsigned32 | read-only | The total number of 'WriteBraw' CIFS calls received since power up. |
| C32 writeCache | 1.3.6.1.4.1.11096.6.1.1.3.3.6.1.8 | Counter32 | read-only | The total number of 'Write Cache' calls received since power up. NOTE : this variable is not used/implemented. This object is now obsolete, and is replaced with a table of values indexed by Cluster Node and name. |
| U32 writeCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.14 | Unsigned32 | read-only | The total number of 'Write' CIFS calls received since power up. |
| U32 writeCloseCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.23 | Unsigned32 | read-only | The total number of 'WriteClose' CIFS calls received since power up. |
| U32 writeXCalls | 1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.26 | Unsigned32 | read-only | The total number of 'WriteX' CIFS calls received since power up. |
RFC description
BlueArc NAS server MIB for monitoring file systems, cluster nodes, performance metrics, licensing, and network interfaces.
Start monitoring BlueArc (Hitachi Data Systems) NAS storage servers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.