ACD-PAA-MIB

All MIBs › ACD-PAA-MIB

Organization: Accedian Networks, Inc.

Last Updated: 2012-11-06

Category: Vendor: Accedian

Description: Manages Physical Access Attributes (PAA) and port access parameters on Accedian MetroNID Ethernet performance devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACD-PAA-MIB?

ACD-PAA-MIB is an Accedian Networks, Inc. proprietary MIB reporting PAA (Performance Assurance Agent) active-measurement test results on Accedian network demarcation devices. Its result table, keyed by test ID, records test state and, per direction (near-end/far-end), packet-loss current/previous values and validity flags, plus one-way delay-variation instantaneous/current/previous min/max/average values with threshold-exceeded flags, and two-way delay instantaneous/current values. As a performance MIB it lets an administrator watch packet loss and delay-variation trends from an active PAA test session to verify SLA compliance on a monitored circuit. It is deployed on Accedian Networks demarcation/performance-monitoring devices. Engineers can download the ACD-PAA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-PAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Accedian Networks demarcation/performance-monitoring devices

Monitoring Examples

An administrator checks acdPaaResultOneWayDvCurrThreshExc to confirm whether one-way delay variation exceeded its configured SLA threshold on an Accedian PAA test session.

What Can Be Monitored

active PAA test packet loss and delay-variation results

Imported Objects

From ACCEDIAN-SMI

acdMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using acdPaaResultState OID:

Select an Accedian MetroNID device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type acdPaaResultState into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates the state of the instance. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is 'lockedIS' or 'lockedOOS', since those indicate the instance has been locked in/out of service rather than running normally. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acdPaa	1.3.6.1.4.1.22420.2.5			PAA database for this Accedian Networks device.
acdPaaCompliance	1.3.6.1.4.1.22420.2.5.9.1.1			The compliance statement for support of the ACD-PAA-MIB module.
acdPaaCompliances	1.3.6.1.4.1.22420.2.5.9.1
acdPaaConformance	1.3.6.1.4.1.22420.2.5.9
acdPaaGroups	1.3.6.1.4.1.22420.2.5.9.2
U32 acdPaaHistResultDuration	1.3.6.1.4.1.22420.2.5.5.1.4	Unsigned32	read-only	The interval in seconds over which the data is sampled for this entry.
acdPaaHistResultEntry	1.3.6.1.4.1.22420.2.5.5.1		not-accessible	An entry consisting of results for a PAA instance for a specific periodin time.
acdPaaHistResultGroup	1.3.6.1.4.1.22420.2.5.9.2.5			Objects for the PAA history result Group.
U32 acdPaaHistResultID	1.3.6.1.4.1.22420.2.5.5.1.1	Unsigned32	not-accessible	Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
I32 acdPaaHistResultIgmpJoinDelayAvgValue	1.3.6.1.4.1.22420.2.5.5.1.40	Integer32	read-only	Indicates the IGMP Join delay average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultIgmpJoinDelayMaxValue	1.3.6.1.4.1.22420.2.5.5.1.39	Integer32	read-only	Indicates the IGMP Join delay maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultIgmpJoinDelayMinValue	1.3.6.1.4.1.22420.2.5.5.1.38	Integer32	read-only	Indicates the IGMP Join delay minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultIgmpJoinDelaySamples	1.3.6.1.4.1.22420.2.5.5.1.37	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate IGMP Join delay results.
U32 acdPaaHistResultIgmpJoinDelayThreshEx	1.3.6.1.4.1.22420.2.5.5.1.41	Unsigned32	read-only	Indicates the number of IGMP Join samples exceeding the limit during this sampling interval.
T/F acdPaaHistResultIgmpJoinDelayValid	1.3.6.1.4.1.22420.2.5.5.1.36	TruthValue	read-only	Indicates the validity of the IGMP Join delay results during this sampling interval.
I32 acdPaaHistResultIgmpLeaveDelayAvgValue	1.3.6.1.4.1.22420.2.5.5.1.46	Integer32	read-only	Indicates the IGMP Leave delay average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultIgmpLeaveDelayMaxValue	1.3.6.1.4.1.22420.2.5.5.1.45	Integer32	read-only	Indicates the IGMP Leave delay maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultIgmpLeaveDelayMinValue	1.3.6.1.4.1.22420.2.5.5.1.44	Integer32	read-only	Indicates the IGMP Leave delay minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultIgmpLeaveDelaySamples	1.3.6.1.4.1.22420.2.5.5.1.43	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate IGMP Leave delay results.
U32 acdPaaHistResultIgmpLeaveDelayThreshEx	1.3.6.1.4.1.22420.2.5.5.1.47	Unsigned32	read-only	Indicates the number of IGMP Leave samples exceeding the limit during this sampling interval.
T/F acdPaaHistResultIgmpLeaveDelayValid	1.3.6.1.4.1.22420.2.5.5.1.42	TruthValue	read-only	Indicates the validity of the IGMP Leave delay results during this sampling interval.
DAT acdPaaHistResultIntervalEnd	1.3.6.1.4.1.22420.2.5.5.1.5	DateAndTime	read-only	This is the time of the end of this entry.
I32 acdPaaHistResultOneWayDelayAvgValue	1.3.6.1.4.1.22420.2.5.5.1.16	Integer32	read-only	Indicate the One-way delay average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultOneWayDelayMaxValue	1.3.6.1.4.1.22420.2.5.5.1.15	Integer32	read-only	Indicate the One-way delay maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultOneWayDelayMinValue	1.3.6.1.4.1.22420.2.5.5.1.14	Integer32	read-only	Indicate the One-way delay minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultOneWayDelaySamples	1.3.6.1.4.1.22420.2.5.5.1.13	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate One-way delay results.
U32 acdPaaHistResultOneWayDelayThreshEx	1.3.6.1.4.1.22420.2.5.5.1.17	Unsigned32	read-only	Indicate the number of sample exceeding the limit during this sampling interval.
T/F acdPaaHistResultOneWayDelayValid	1.3.6.1.4.1.22420.2.5.5.1.12	TruthValue	read-only	Indicate the validity of the One-way delay results during this sampling interval.
I32 acdPaaHistResultOneWayDvAvgValue	1.3.6.1.4.1.22420.2.5.5.1.22	Integer32	read-only	Indicates the One-way delay variation average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultOneWayDvMaxValue	1.3.6.1.4.1.22420.2.5.5.1.21	Integer32	read-only	Indicates the One-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultOneWayDvMinValue	1.3.6.1.4.1.22420.2.5.5.1.20	Integer32	read-only	Indicates the One-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultOneWayDvSamples	1.3.6.1.4.1.22420.2.5.5.1.19	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.
U32 acdPaaHistResultOneWayDvThreshEx	1.3.6.1.4.1.22420.2.5.5.1.23	Unsigned32	read-only	Indicates the number of samples exceeding the limit during this sampling interval.
T/F acdPaaHistResultOneWayDvValid	1.3.6.1.4.1.22420.2.5.5.1.18	TruthValue	read-only	Indicates the validity of the One-way delay variation results during this sampling interval.
U32 acdPaaHistResultPktLossFeNbrLoss	1.3.6.1.4.1.22420.2.5.5.1.51	Unsigned32	read-only	Indicates the number of far-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples.
U32 acdPaaHistResultPktLossFeSamples	1.3.6.1.4.1.22420.2.5.5.1.10	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate the Far-end packet loss.
T/F acdPaaHistResultPktLossFeValid	1.3.6.1.4.1.22420.2.5.5.1.9	TruthValue	read-only	Indicates the validity of the Far-end packet loss results during this sampling interval.
U32 acdPaaHistResultPktLossFeValue	1.3.6.1.4.1.22420.2.5.5.1.11	Unsigned32	read-only	Indicates the Far-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent.
U32 acdPaaHistResultPktLossFeValueExt	1.3.6.1.4.1.22420.2.5.5.1.49	Unsigned32	read-only	Extended far-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaHistResultPktLossNeNbrLoss	1.3.6.1.4.1.22420.2.5.5.1.50	Unsigned32	read-only	Indicates the number of near-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples.
U32 acdPaaHistResultPktLossNeSamples	1.3.6.1.4.1.22420.2.5.5.1.7	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate the Near-end packet loss.
T/F acdPaaHistResultPktLossNeValid	1.3.6.1.4.1.22420.2.5.5.1.6	TruthValue	read-only	Indicates the validity of the Near-end packet loss results during this sampling interval.
U32 acdPaaHistResultPktLossNeValue	1.3.6.1.4.1.22420.2.5.5.1.8	Unsigned32	read-only	Indicates the Near-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent.
U32 acdPaaHistResultPktLossNeValueExt	1.3.6.1.4.1.22420.2.5.5.1.48	Unsigned32	read-only	Extended near-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaHistResultSampleIndex	1.3.6.1.4.1.22420.2.5.5.1.2	Unsigned32	not-accessible	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PAA instance. This index starts at 1 and increases by one as each new sample.
INT acdPaaHistResultStatus	1.3.6.1.4.1.22420.2.5.5.1.3	INTEGER	read-only	The status of this acdPaaHistResult entry.
acdPaaHistResultTable	1.3.6.1.4.1.22420.2.5.5		not-accessible	Result table of all Paa entries
I32 acdPaaHistResultTwoWayDelayAvgValue	1.3.6.1.4.1.22420.2.5.5.1.28	Integer32	read-only	Indicates the Two-way delay average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultTwoWayDelayMaxValue	1.3.6.1.4.1.22420.2.5.5.1.27	Integer32	read-only	Indicates the Two-way delay maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultTwoWayDelayMinValue	1.3.6.1.4.1.22420.2.5.5.1.26	Integer32	read-only	Indicates the Two-way delay minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultTwoWayDelaySamples	1.3.6.1.4.1.22420.2.5.5.1.25	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results.
U32 acdPaaHistResultTwoWayDelayThreshEx	1.3.6.1.4.1.22420.2.5.5.1.29	Unsigned32	read-only	Indicates the number of samples exceeding the limit during this sampling interval.
T/F acdPaaHistResultTwoWayDelayValid	1.3.6.1.4.1.22420.2.5.5.1.24	TruthValue	read-only	Indicates the validity of the Two-way delay results during this sampling interval.
I32 acdPaaHistResultTwoWayDvAvgValue	1.3.6.1.4.1.22420.2.5.5.1.34	Integer32	read-only	Indicates the Two-way delay variation average value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultTwoWayDvMaxValue	1.3.6.1.4.1.22420.2.5.5.1.33	Integer32	read-only	Indicates the Two-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds.
I32 acdPaaHistResultTwoWayDvMinValue	1.3.6.1.4.1.22420.2.5.5.1.32	Integer32	read-only	Indicates the Two-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds.
U32 acdPaaHistResultTwoWayDvSamples	1.3.6.1.4.1.22420.2.5.5.1.31	Unsigned32	read-only	Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.
U32 acdPaaHistResultTwoWayDvThreshEx	1.3.6.1.4.1.22420.2.5.5.1.35	Unsigned32	read-only	Indicates the number of samples exceeding the limit during this sampling interval.
T/F acdPaaHistResultTwoWayDvValid	1.3.6.1.4.1.22420.2.5.5.1.30	TruthValue	read-only	Indicates the validity of the Two-way delay variation results during this sampling interval.
U32 acdPaaL2CfgCcLossThresh	1.3.6.1.4.1.22420.2.5.4.1.6	Unsigned32	read-write	Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss.
acdPaaL2CfgEntry	1.3.6.1.4.1.22420.2.5.4.1		not-accessible	An entry consisting of all settings to manage a PAA instance.
U32 acdPaaL2CfgEtype	1.3.6.1.4.1.22420.2.5.4.1.22	Unsigned32	read-write	The Ethernet type used for this PAA instance.
acdPaaL2CfgGroup	1.3.6.1.4.1.22420.2.5.9.2.4			Objects for the PAA L2 configuration Group.
U32 acdPaaL2CfgID	1.3.6.1.4.1.22420.2.5.4.1.1	Unsigned32	not-accessible	Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
MAC acdPaaL2CfgMacDst	1.3.6.1.4.1.22420.2.5.4.1.21	MacAddress	read-write	The MAC address used to reach the peer PAA instance.
STR acdPaaL2CfgName	1.3.6.1.4.1.22420.2.5.4.1.2	DisplayString	read-write	This is a string to identify this PAA instance.
U32 acdPaaL2CfgOneWayAvgDelayThresh	1.3.6.1.4.1.22420.2.5.4.1.31	Unsigned32	read-write	One-way average delay threshold.
U32 acdPaaL2CfgOneWayAvgDvThresh	1.3.6.1.4.1.22420.2.5.4.1.12	Unsigned32	read-write	One-way average delay variation threshold.
U32 acdPaaL2CfgOneWayDelayMax	1.3.6.1.4.1.22420.2.5.4.1.29	Unsigned32	read-write	Maximum allowed instantaneous delay.
U32 acdPaaL2CfgOneWayDelayThresh	1.3.6.1.4.1.22420.2.5.4.1.30	Unsigned32	read-write	Nbr consecutive delay > max before alert.
U32 acdPaaL2CfgOneWayDvMax	1.3.6.1.4.1.22420.2.5.4.1.10	Unsigned32	read-write	Maximum allowed instantaneous delay variation.
U32 acdPaaL2CfgOneWayDvThresh	1.3.6.1.4.1.22420.2.5.4.1.11	Unsigned32	read-write	Number of consecutive delay variations greater than the threshold.
U32 acdPaaL2CfgOneWayRefPeriod	1.3.6.1.4.1.22420.2.5.4.1.9	Unsigned32	read-write	Reference period in milliseconds for one-way measurement.
U32 acdPaaL2CfgOperationMode	1.3.6.1.4.1.22420.2.5.4.1.33	Unsigned32	read-write	PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink
U32 acdPaaL2CfgPeerID	1.3.6.1.4.1.22420.2.5.4.1.32	Unsigned32	read-write	Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdPaaL2CfgPktLossRefPeriod	1.3.6.1.4.1.22420.2.5.4.1.7	Unsigned32	read-write	Reference period in milliseconds for packet loss measurement.
U32 acdPaaL2CfgPktLossThresh	1.3.6.1.4.1.22420.2.5.4.1.8	Unsigned32	read-write	Allowed packet loss, in percentage (%).
U32 acdPaaL2CfgPktLossThreshExt	1.3.6.1.4.1.22420.2.5.4.1.34	Unsigned32	read-write	Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
U32 acdPaaL2CfgPktSize	1.3.6.1.4.1.22420.2.5.4.1.4	Unsigned32	read-write	Transmit packet size.
STR acdPaaL2CfgPortName	1.3.6.1.4.1.22420.2.5.4.1.20	DisplayString	read-write	The Port Name used to reach the peer PAA instance.
U32 acdPaaL2CfgSamplingPeriod	1.3.6.1.4.1.22420.2.5.4.1.5	Unsigned32	read-write	Interval in milliseconds at which PAA issues PAA measurement packets.
INT acdPaaL2CfgState	1.3.6.1.4.1.22420.2.5.4.1.3	INTEGER	read-write	Configuration state of this PAA entry.
acdPaaL2CfgTable	1.3.6.1.4.1.22420.2.5.4		not-accessible	Configuration table of all L2 PAA entries
U32 acdPaaL2CfgTwoWayAvgDelayThresh	1.3.6.1.4.1.22420.2.5.4.1.16	Unsigned32	read-write	Two-way average delay threshold.
U32 acdPaaL2CfgTwoWayAvgDvThresh	1.3.6.1.4.1.22420.2.5.4.1.19	Unsigned32	read-write	Two-way average delay variation threshold.
U32 acdPaaL2CfgTwoWayDelayMax	1.3.6.1.4.1.22420.2.5.4.1.14	Unsigned32	read-write	Maximum allowed instantaneous delay.
U32 acdPaaL2CfgTwoWayDelayThresh	1.3.6.1.4.1.22420.2.5.4.1.15	Unsigned32	read-write	Number of consecutive delays greater than the threshold.
U32 acdPaaL2CfgTwoWayDvMax	1.3.6.1.4.1.22420.2.5.4.1.17	Unsigned32	read-write	Maximum allowed instantaneous delay variation.
U32 acdPaaL2CfgTwoWayDvThresh	1.3.6.1.4.1.22420.2.5.4.1.18	Unsigned32	read-write	Number of consecutive delay variations greater than the threshold.
U32 acdPaaL2CfgTwoWayRefPeriod	1.3.6.1.4.1.22420.2.5.4.1.13	Unsigned32	read-write	Reference period in milliseconds for two-way measurement.
U32 acdPaaL2CfgVlan1Id	1.3.6.1.4.1.22420.2.5.4.1.24	Unsigned32	read-write	The first VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095.
T/F acdPaaL2CfgVlan1IdEn	1.3.6.1.4.1.22420.2.5.4.1.23	TruthValue	read-write	Enable or disable the first VLAN ID check
U32 acdPaaL2CfgVlan1IdExpected	1.3.6.1.4.1.22420.2.5.4.1.37	Unsigned32	read-write	The expected VLAN 1 ID value.
T/F acdPaaL2CfgVlan1IdTxRxCoupling	1.3.6.1.4.1.22420.2.5.4.1.36	TruthValue	read-write	Indicates the status of VLAN 1 ID Tx/Rx coupling.
T/F acdPaaL2CfgVlan1IdValidation	1.3.6.1.4.1.22420.2.5.4.1.35	TruthValue	read-write	Indicates the status of VLAN 1 ID validation.
U32 acdPaaL2CfgVlan1PbitsValue	1.3.6.1.4.1.22420.2.5.4.1.27	Unsigned32	read-write	The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
U32 acdPaaL2CfgVlan1PriorityExpected	1.3.6.1.4.1.22420.2.5.4.1.43	Unsigned32	read-write	The expected VLAN 1 priority value.
T/F acdPaaL2CfgVlan1PriorityTxRxCoupling	1.3.6.1.4.1.22420.2.5.4.1.42	TruthValue	read-write	Indicates the status of VLAN 1 priority Tx/Rx coupling.
T/F acdPaaL2CfgVlan1PriorityValidation	1.3.6.1.4.1.22420.2.5.4.1.41	TruthValue	read-write	Indicates the status of VLAN 1 priority validation.
U32 acdPaaL2CfgVlan2Id	1.3.6.1.4.1.22420.2.5.4.1.26	Unsigned32	read-write	The second VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095.
T/F acdPaaL2CfgVlan2IdEn	1.3.6.1.4.1.22420.2.5.4.1.25	TruthValue	read-write	Enable or disable the second VLAN ID check
U32 acdPaaL2CfgVlan2IdExpected	1.3.6.1.4.1.22420.2.5.4.1.40	Unsigned32	read-write	The expected VLAN 2 ID value.
T/F acdPaaL2CfgVlan2IdTxRxCoupling	1.3.6.1.4.1.22420.2.5.4.1.39	TruthValue	read-write	Indicates the status of VLAN 2 ID Tx/Rx coupling.
T/F acdPaaL2CfgVlan2IdValidation	1.3.6.1.4.1.22420.2.5.4.1.38	TruthValue	read-write	Indicates the status of VLAN 2 ID validation.
U32 acdPaaL2CfgVlan2PbitsValue	1.3.6.1.4.1.22420.2.5.4.1.28	Unsigned32	read-write	The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
U32 acdPaaL2CfgVlan2PriorityExpected	1.3.6.1.4.1.22420.2.5.4.1.46	Unsigned32	read-write	The expected VLAN 2 priority value.
T/F acdPaaL2CfgVlan2PriorityTxRxCoupling	1.3.6.1.4.1.22420.2.5.4.1.45	TruthValue	read-write	Indicates the status of VLAN 2 priority Tx/Rx coupling.
T/F acdPaaL2CfgVlan2PriorityValidation	1.3.6.1.4.1.22420.2.5.4.1.44	TruthValue	read-write	Indicates the status of VLAN 2 priority validation.
acdPaaMIBObjects	1.3.6.1.4.1.22420.2.5.8
acdPaaNotifications	1.3.6.1.4.1.22420.2.5.7
U32 acdPaaResultDscpExpected	1.3.6.1.4.1.22420.2.5.1.1.123	Unsigned32	read-only	Indicates the DSCP expected value.
U32 acdPaaResultDscpMismatch	1.3.6.1.4.1.22420.2.5.1.1.122	Unsigned32	read-only	Indicates the number of DSCP mismatch detected.
U32 acdPaaResultDscpReceived	1.3.6.1.4.1.22420.2.5.1.1.124	Unsigned32	read-only	Indicates the DSCP received value.
acdPaaResultEntry	1.3.6.1.4.1.22420.2.5.1.1		not-accessible	An entry consisting of results for a PAA instance.
acdPaaResultGroup	1.3.6.1.4.1.22420.2.5.9.2.1			Objects for the PAA result Group.
U32 acdPaaResultID	1.3.6.1.4.1.22420.2.5.1.1.1	Unsigned32	not-accessible	Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
I32 acdPaaResultIgmpJoinDelayCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.74	Integer32	read-only	Indicates the current IGMP Join delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpJoinDelayCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.73	Integer32	read-only	Indicates the current IGMP Join delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpJoinDelayCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.72	Integer32	read-only	Indicates the current IGMP Join delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultIgmpJoinDelayCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.94	Unsigned32	read-only	Indicates the number of IGMP Join samples gathered to calculate the current period IGMP Join delay results.
U32 acdPaaResultIgmpJoinDelayCurrThreshEx	1.3.6.1.4.1.22420.2.5.1.1.75	Unsigned32	read-only	Indicates the current number of IGMP Join samples exceeding the limit.
T/F acdPaaResultIgmpJoinDelayCurrValid	1.3.6.1.4.1.22420.2.5.1.1.71	TruthValue	read-only	Indicates the validity of the current IGMP Join delay results.
I32 acdPaaResultIgmpJoinDelayInstValue	1.3.6.1.4.1.22420.2.5.1.1.70	Integer32	read-only	Indicates the IGMP Join delay instantaneous value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpJoinDelayPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.79	Integer32	read-only	Indicates the previous IGMP Join delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpJoinDelayPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.78	Integer32	read-only	Indicates the previous IGMP Join delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpJoinDelayPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.77	Integer32	read-only	Indicates the previous IGMP Join delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultIgmpJoinDelayPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.95	Unsigned32	read-only	Indicates the number of IGMP Join samples gathered to calculate the previous period IGMP Join delay results.
U32 acdPaaResultIgmpJoinDelayPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.80	Unsigned32	read-only	Indicates the previous number of IGMP Join samples exceeding the limit.
T/F acdPaaResultIgmpJoinDelayPrevValid	1.3.6.1.4.1.22420.2.5.1.1.76	TruthValue	read-only	Indicates the validity of the previous IGMP Join delay results.
DAT acdPaaResultIgmpJoinDelayTime	1.3.6.1.4.1.22420.2.5.1.1.92	DateAndTime	read-only	Indicates the time when the current IGMP Join delay results were moved to the previous IGMP join delay results.
I32 acdPaaResultIgmpLeaveDelayCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.85	Integer32	read-only	Indicates the current IGMP Leave delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpLeaveDelayCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.84	Integer32	read-only	Indicates the current IGMP Leave delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpLeaveDelayCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.83	Integer32	read-only	Indicates the current IGMP Leave delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultIgmpLeaveDelayCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.96	Unsigned32	read-only	Indicates the number of IGMP Leave samples gathered to calculate the current period IGMP Leave delay results.
U32 acdPaaResultIgmpLeaveDelayCurrThreshEx	1.3.6.1.4.1.22420.2.5.1.1.86	Unsigned32	read-only	Indicates the current number of IGMP Leave samples exceeding the limit.
T/F acdPaaResultIgmpLeaveDelayCurrValid	1.3.6.1.4.1.22420.2.5.1.1.82	TruthValue	read-only	Indicates the validity of the current IGMP Leave delay results.
I32 acdPaaResultIgmpLeaveDelayInstValue	1.3.6.1.4.1.22420.2.5.1.1.81	Integer32	read-only	Indicates the IGMP Leave delay instantaneous value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpLeaveDelayPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.90	Integer32	read-only	Indicates the previous IGMP Leave delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpLeaveDelayPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.89	Integer32	read-only	Indicates the previous IGMP Leave delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultIgmpLeaveDelayPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.88	Integer32	read-only	Indicates the previous IGMP Leave delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultIgmpLeaveDelayPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.97	Unsigned32	read-only	Indicates the number of IGMP Leave samples gathered to calculate the previous period IGMP Leave delay results.
U32 acdPaaResultIgmpLeaveDelayPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.91	Unsigned32	read-only	Indicates the previous number of IGMP Leave samples exceeding the limit.
T/F acdPaaResultIgmpLeaveDelayPrevValid	1.3.6.1.4.1.22420.2.5.1.1.87	TruthValue	read-only	Indicates the validity of the previous IGMP Leave delay results.
DAT acdPaaResultIgmpLeaveDelayTime	1.3.6.1.4.1.22420.2.5.1.1.93	DateAndTime	read-only	Indicates the time when the current IGMP Leave results were moved to the previous IGMP Leave results.
I32 acdPaaResultOneWayDelayCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.48	Integer32	read-only	Indicate the current One-way delay average value. The value is express in micro-seconds.
I32 acdPaaResultOneWayDelayCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.47	Integer32	read-only	Indicate the current One-way delay maximum value. The value is express in micro-seconds.
I32 acdPaaResultOneWayDelayCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.46	Integer32	read-only	Indicate the current One-way delay minimum value. The value is express in micro-seconds.
U32 acdPaaResultOneWayDelayCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.62	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period one-way delay results.
U32 acdPaaResultOneWayDelayCurrThreshEx	1.3.6.1.4.1.22420.2.5.1.1.49	Unsigned32	read-only	Indicate the current number of sample exceeding the limit.
T/F acdPaaResultOneWayDelayCurrValid	1.3.6.1.4.1.22420.2.5.1.1.45	TruthValue	read-only	Indicate the validity of the current One-way delay results.
I32 acdPaaResultOneWayDelayInstValue	1.3.6.1.4.1.22420.2.5.1.1.44	Integer32	read-only	Indicate the One-way delay instantaneous value. The value is express in micro-seconds.
I32 acdPaaResultOneWayDelayPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.53	Integer32	read-only	Indicate the previous One-way delay average value. The value is express in micro-seconds.
I32 acdPaaResultOneWayDelayPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.52	Integer32	read-only	Indicate the previous One-way delay maximum value. The value is express in micro-seconds.
I32 acdPaaResultOneWayDelayPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.51	Integer32	read-only	Indicate the previous One-way delay minimum value. The value is express in micro-seconds.
U32 acdPaaResultOneWayDelayPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.63	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period one-way delay results.
U32 acdPaaResultOneWayDelayPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.54	Unsigned32	read-only	Indicate the previous number of sample exceeding the limit.
T/F acdPaaResultOneWayDelayPrevValid	1.3.6.1.4.1.22420.2.5.1.1.50	TruthValue	read-only	Indicate the validity of the previous One-way delay results.
I32 acdPaaResultOneWayDvCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.15	Integer32	read-only	Indicates the current One-way delay variation average value. The value is expressed in micro-seconds.
I32 acdPaaResultOneWayDvCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.14	Integer32	read-only	Indicates the current One-way delay variation maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultOneWayDvCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.13	Integer32	read-only	Indicates the current One-way delay variation minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultOneWayDvCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.64	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period one-way delay variation results.
U32 acdPaaResultOneWayDvCurrThreshExc	1.3.6.1.4.1.22420.2.5.1.1.16	Unsigned32	read-only	Indicates the current number of samples exceeding the limit.
T/F acdPaaResultOneWayDvCurrValid	1.3.6.1.4.1.22420.2.5.1.1.12	TruthValue	read-only	Indicates the validity of the current One-way delay variation results.
I32 acdPaaResultOneWayDvInstValue	1.3.6.1.4.1.22420.2.5.1.1.11	Integer32	read-only	Indicates the One-way delay variation instantaneous value. The value is expressed in micro-seconds.
I32 acdPaaResultOneWayDvPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.20	Integer32	read-only	Indicates the previous One-way delay variation average value. The value is expressed in micro-seconds.
I32 acdPaaResultOneWayDvPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.19	Integer32	read-only	Indicates the previous One-way delay variation maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultOneWayDvPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.18	Integer32	read-only	Indicates the previous One-way delay variation minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultOneWayDvPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.65	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period one-way delay variation results.
U32 acdPaaResultOneWayDvPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.21	Unsigned32	read-only	Indicates the previous number of samples exceeding the limit.
T/F acdPaaResultOneWayDvPrevValid	1.3.6.1.4.1.22420.2.5.1.1.17	TruthValue	read-only	Indicates the validity of the previous One-way delay variation results.
DAT acdPaaResultOneWayTime	1.3.6.1.4.1.22420.2.5.1.1.56	DateAndTime	read-only	Indicates the time when the current one-way results were moved to the previous one-way results.
U32 acdPaaResultPktLossCurrGaps	1.3.6.1.4.1.22420.2.5.1.1.98	Unsigned32	read-only	Indicates the number of gaps that occured in the current period.
U32 acdPaaResultPktLossCurrLargestGap	1.3.6.1.4.1.22420.2.5.1.1.100	Unsigned32	read-only	Indicates the size of the largest gap that occured in the current period.
U32 acdPaaResultPktLossFeCurrNbrLoss	1.3.6.1.4.1.22420.2.5.1.1.108	Unsigned32	read-only	Indicates the current period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFeCurrSamples.
U32 acdPaaResultPktLossFeCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.60	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period far-end packet loss results.
T/F acdPaaResultPktLossFeCurrValid	1.3.6.1.4.1.22420.2.5.1.1.7	TruthValue	read-only	Indicates the validity of the Far-end current packet loss results.
U32 acdPaaResultPktLossFeCurrValue	1.3.6.1.4.1.22420.2.5.1.1.8	Unsigned32	read-only	Indicates the Far-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
U32 acdPaaResultPktLossFeCurrValueExt	1.3.6.1.4.1.22420.2.5.1.1.104	Unsigned32	read-only	Extended far-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaResultPktLossFePrevNbrLoss	1.3.6.1.4.1.22420.2.5.1.1.109	Unsigned32	read-only	Indicates the previous period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFePrevSamples.
U32 acdPaaResultPktLossFePrevSamples	1.3.6.1.4.1.22420.2.5.1.1.61	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period far-end packet loss results.
T/F acdPaaResultPktLossFePrevValid	1.3.6.1.4.1.22420.2.5.1.1.9	TruthValue	read-only	Indicates the validity of the Far-end previous packet loss results.
U32 acdPaaResultPktLossFePrevValue	1.3.6.1.4.1.22420.2.5.1.1.10	Unsigned32	read-only	Indicates the Far-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
U32 acdPaaResultPktLossFePrevValueExt	1.3.6.1.4.1.22420.2.5.1.1.105	Unsigned32	read-only	Extended far-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaResultPktLossNeCurrNbrLoss	1.3.6.1.4.1.22420.2.5.1.1.106	Unsigned32	read-only	Indicates the current period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNeCurrSamples.
U32 acdPaaResultPktLossNeCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.58	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period near-end packet loss results.
T/F acdPaaResultPktLossNeCurrValid	1.3.6.1.4.1.22420.2.5.1.1.3	TruthValue	read-only	Indicates the validity of the Near-end current packet loss results.
U32 acdPaaResultPktLossNeCurrValue	1.3.6.1.4.1.22420.2.5.1.1.4	Unsigned32	read-only	Indicates the Near-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
U32 acdPaaResultPktLossNeCurrValueExt	1.3.6.1.4.1.22420.2.5.1.1.102	Unsigned32	read-only	Extended near-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaResultPktLossNePrevNbrLoss	1.3.6.1.4.1.22420.2.5.1.1.107	Unsigned32	read-only	Indicates the previous period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNePrevSamples.
U32 acdPaaResultPktLossNePrevSamples	1.3.6.1.4.1.22420.2.5.1.1.59	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period near-end packet loss results.
T/F acdPaaResultPktLossNePrevValid	1.3.6.1.4.1.22420.2.5.1.1.5	TruthValue	read-only	Indicates the validity of the Near-end previous packet loss results.
U32 acdPaaResultPktLossNePrevValue	1.3.6.1.4.1.22420.2.5.1.1.6	Unsigned32	read-only	Indicates the Near-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
U32 acdPaaResultPktLossNePrevValueExt	1.3.6.1.4.1.22420.2.5.1.1.103	Unsigned32	read-only	Extended near-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
U32 acdPaaResultPktLossPrevGaps	1.3.6.1.4.1.22420.2.5.1.1.99	Unsigned32	read-only	Indicates the number of gaps that occured in the previous period.
U32 acdPaaResultPktLossPrevLargestGap	1.3.6.1.4.1.22420.2.5.1.1.101	Unsigned32	read-only	Indicates the size of the largest gap that occured in the previous period.
DAT acdPaaResultPktLossTime	1.3.6.1.4.1.22420.2.5.1.1.55	DateAndTime	read-only	Indicates the time when the current packet loss results were moved to the previous packet loss results.
INT acdPaaResultStateEx	1.3.6.1.4.1.22420.2.5.1.1.2	INTEGER	read-only	Indicates the state of the instance.
acdPaaResultTable	1.3.6.1.4.1.22420.2.5.1		not-accessible	Result table of all Paa entries
I32 acdPaaResultTwoWayDelayCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.26	Integer32	read-only	Indicates the current Two-way delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDelayCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.25	Integer32	read-only	Indicates the current Two-way delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDelayCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.24	Integer32	read-only	Indicates the current Two-way delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultTwoWayDelayCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.66	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period two-way delay results.
U32 acdPaaResultTwoWayDelayCurrThreshEx	1.3.6.1.4.1.22420.2.5.1.1.27	Unsigned32	read-only	Indicates the current number of samples exceeding the limit.
T/F acdPaaResultTwoWayDelayCurrValid	1.3.6.1.4.1.22420.2.5.1.1.23	TruthValue	read-only	Indicates the validity of the current Two-way delay results.
I32 acdPaaResultTwoWayDelayInstValue	1.3.6.1.4.1.22420.2.5.1.1.22	Integer32	read-only	Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDelayPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.31	Integer32	read-only	Indicates the previous Two-way delay average value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDelayPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.30	Integer32	read-only	Indicates the previous Two-way delay maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDelayPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.29	Integer32	read-only	Indicates the previous Two-way delay minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultTwoWayDelayPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.67	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period two-way delay results.
U32 acdPaaResultTwoWayDelayPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.32	Unsigned32	read-only	Indicates the previous number of samples exceeding the limit.
T/F acdPaaResultTwoWayDelayPrevValid	1.3.6.1.4.1.22420.2.5.1.1.28	TruthValue	read-only	Indicates the validity of the previous Two-way delay results.
I32 acdPaaResultTwoWayDvCurrAvgValue	1.3.6.1.4.1.22420.2.5.1.1.37	Integer32	read-only	Indicates the current Two-way delay variation average value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDvCurrMaxValue	1.3.6.1.4.1.22420.2.5.1.1.36	Integer32	read-only	Indicates the current Two-way delay variation maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDvCurrMinValue	1.3.6.1.4.1.22420.2.5.1.1.35	Integer32	read-only	Indicates the current Two-way delay variation minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultTwoWayDvCurrSamples	1.3.6.1.4.1.22420.2.5.1.1.68	Unsigned32	read-only	Indicates the number of samples gathered to calculate the current period two-way delay variation results.
U32 acdPaaResultTwoWayDvCurrThreshEx	1.3.6.1.4.1.22420.2.5.1.1.38	Unsigned32	read-only	Indicates the current number of samples exceeding the limit.
T/F acdPaaResultTwoWayDvCurrValid	1.3.6.1.4.1.22420.2.5.1.1.34	TruthValue	read-only	Indicates the validity of the current Two-way delay variation results.
I32 acdPaaResultTwoWayDvInstValue	1.3.6.1.4.1.22420.2.5.1.1.33	Integer32	read-only	Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDvPrevAvgValue	1.3.6.1.4.1.22420.2.5.1.1.42	Integer32	read-only	Indicates the previous Two-way delay variation average value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDvPrevMaxValue	1.3.6.1.4.1.22420.2.5.1.1.41	Integer32	read-only	Indicates the previous Two-way delay variation maximum value. The value is expressed in micro-seconds.
I32 acdPaaResultTwoWayDvPrevMinValue	1.3.6.1.4.1.22420.2.5.1.1.40	Integer32	read-only	Indicates the previous Two-way delay variation minimum value. The value is expressed in micro-seconds.
U32 acdPaaResultTwoWayDvPrevSamples	1.3.6.1.4.1.22420.2.5.1.1.69	Unsigned32	read-only	Indicates the number of samples gathered to calculate the previous period two-way delay variation results.
U32 acdPaaResultTwoWayDvPrevThreshEx	1.3.6.1.4.1.22420.2.5.1.1.43	Unsigned32	read-only	Indicates the previous number of samples exceeding the limit.
T/F acdPaaResultTwoWayDvPrevValid	1.3.6.1.4.1.22420.2.5.1.1.39	TruthValue	read-only	Indicates the validity of the previous Two-way delay variation results.
DAT acdPaaResultTwoWayTime	1.3.6.1.4.1.22420.2.5.1.1.57	DateAndTime	read-only	Indicates the time when the current two-way results were moved to the previous two-way results.
U32 acdPaaResultVlan1IdExpected	1.3.6.1.4.1.22420.2.5.1.1.111	Unsigned32	read-only	Indicates the VLAN 1 ID expected value.
U32 acdPaaResultVlan1IdMismatch	1.3.6.1.4.1.22420.2.5.1.1.110	Unsigned32	read-only	Indicates the number of VLAN 1 ID mismatch detected.
U32 acdPaaResultVlan1IdReceived	1.3.6.1.4.1.22420.2.5.1.1.112	Unsigned32	read-only	Indicates the VLAN 1 ID received value.
U32 acdPaaResultVlan1PriorityExpected	1.3.6.1.4.1.22420.2.5.1.1.117	Unsigned32	read-only	Indicates the VLAN 1 priority expected value.
U32 acdPaaResultVlan1PriorityMismatch	1.3.6.1.4.1.22420.2.5.1.1.116	Unsigned32	read-only	Indicates the number of VLAN 1 priority mismatch detected.
U32 acdPaaResultVlan1PriorityReceived	1.3.6.1.4.1.22420.2.5.1.1.118	Unsigned32	read-only	Indicates the VLAN 1 priority received value.
U32 acdPaaResultVlan2IdExpected	1.3.6.1.4.1.22420.2.5.1.1.114	Unsigned32	read-only	Indicates the VLAN 2 ID expected value.
U32 acdPaaResultVlan2IdMismatch	1.3.6.1.4.1.22420.2.5.1.1.113	Unsigned32	read-only	Indicates the number of VLAN 2 ID mismatch detected.
U32 acdPaaResultVlan2IdReceived	1.3.6.1.4.1.22420.2.5.1.1.115	Unsigned32	read-only	Indicates the VLAN 2 ID received value.
U32 acdPaaResultVlan2PriorityExpected	1.3.6.1.4.1.22420.2.5.1.1.120	Unsigned32	read-only	Indicates the VLAN 2 priority expected value.
U32 acdPaaResultVlan2PriorityMismatch	1.3.6.1.4.1.22420.2.5.1.1.119	Unsigned32	read-only	Indicates the number of VLAN 2 priority mismatch detected.
U32 acdPaaResultVlan2PriorityReceived	1.3.6.1.4.1.22420.2.5.1.1.121	Unsigned32	read-only	Indicates the VLAN 2 priority received value.
T/F acdPaaStatusCcAlert	1.3.6.1.4.1.22420.2.5.2.1.2	TruthValue	read-only	Indicates the presence of the Connectivity Check alert.
acdPaaStatusEntry	1.3.6.1.4.1.22420.2.5.2.1		not-accessible	An entry consisting of the status for a PAA instance.
acdPaaStatusGroup	1.3.6.1.4.1.22420.2.5.9.2.2			Objects for the PAA status Group.
U32 acdPaaStatusID	1.3.6.1.4.1.22420.2.5.2.1.1	Unsigned32	not-accessible	Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
T/F acdPaaStatusOneWayAvgDelayAlert	1.3.6.1.4.1.22420.2.5.2.1.11	TruthValue	read-only	Indicate the presence of the One Way Average Delay alert.
T/F acdPaaStatusOneWayAvgDvAlert	1.3.6.1.4.1.22420.2.5.2.1.5	TruthValue	read-only	Indicates the presence of the One-way Average Delay Variation alert.
T/F acdPaaStatusOneWayDelayAlert	1.3.6.1.4.1.22420.2.5.2.1.10	TruthValue	read-only	Indicate the presence of the One Way Delay alert.
T/F acdPaaStatusOneWayDvAlert	1.3.6.1.4.1.22420.2.5.2.1.4	TruthValue	read-only	Indicates the presence of the One-way Delay Variation alert.
STR acdPaaStatusPeerAddress	1.3.6.1.4.1.22420.2.5.2.1.13	DisplayString	read-only	The peer address. Dynamically resolved or statically configured.
T/F acdPaaStatusPktLossAlert	1.3.6.1.4.1.22420.2.5.2.1.3	TruthValue	read-only	Indicates the presence of the Packet Loss alert.
INT acdPaaStatusState	1.3.6.1.4.1.22420.2.5.2.1.12	INTEGER	read-only	Paa instance state.
acdPaaStatusTable	1.3.6.1.4.1.22420.2.5.2		not-accessible	Status table of all Paa entries
T/F acdPaaStatusTwoWayAvgDelayAlert	1.3.6.1.4.1.22420.2.5.2.1.7	TruthValue	read-only	Indicates the presence of the Two-way Average Delay alert.
T/F acdPaaStatusTwoWayAvgDvAlert	1.3.6.1.4.1.22420.2.5.2.1.9	TruthValue	read-only	Indicates the presence of the Two-way Average Delay Variation alert.
T/F acdPaaStatusTwoWayDelayAlert	1.3.6.1.4.1.22420.2.5.2.1.6	TruthValue	read-only	Indicates the presence of the Two-way Delay alert.
T/F acdPaaStatusTwoWayDvAlert	1.3.6.1.4.1.22420.2.5.2.1.8	TruthValue	read-only	Indicates the presence of the Two-way Delay Variation alert.
U32 acdPaaUdpCfgCcLossThresh	1.3.6.1.4.1.22420.2.5.3.1.6	Unsigned32	read-write	Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss.
U32 acdPaaUdpCfgDestinationPortNumber	1.3.6.1.4.1.22420.2.5.3.1.28	Unsigned32	read-write	The destination UDP port number used to reach the peer PAA instance.
U32 acdPaaUdpCfgDscpExpected	1.3.6.1.4.1.22420.2.5.3.1.45	Unsigned32	read-write	The expected VLAN 1 priority value.
T/F acdPaaUdpCfgDscpTxRxCoupling	1.3.6.1.4.1.22420.2.5.3.1.44	TruthValue	read-write	Indicates the status of DSCP TX/RX coupling.
T/F acdPaaUdpCfgDscpValidation	1.3.6.1.4.1.22420.2.5.3.1.43	TruthValue	read-write	Indicates the status of DSCP validation.
U32 acdPaaUdpCfgDscpValue	1.3.6.1.4.1.22420.2.5.3.1.22	Unsigned32	read-write	The DSCP value used to reach the peer PAA instance. Its value ranges from 0 to 64.
acdPaaUdpCfgEntry	1.3.6.1.4.1.22420.2.5.3.1		not-accessible	An entry consisting of all settings to manage a PAA instance.
acdPaaUdpCfgGroup	1.3.6.1.4.1.22420.2.5.9.2.3			Objects for the PAA UDP configuration Group.
U32 acdPaaUdpCfgID	1.3.6.1.4.1.22420.2.5.3.1.1	Unsigned32	not-accessible	Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdPaaUdpCfgIgmpJoinAvgDlyThres	1.3.6.1.4.1.22420.2.5.3.1.35	Unsigned32	read-write	The maximum join average delay.
U32 acdPaaUdpCfgIgmpJoinDlyThres	1.3.6.1.4.1.22420.2.5.3.1.34	Unsigned32	read-write	The maximum consecutive join delay samples allowed greater than the maximum join delay.
U32 acdPaaUdpCfgIgmpLvAvgDlyThresh	1.3.6.1.4.1.22420.2.5.3.1.38	Unsigned32	read-write	The maximum leave delay average.
U32 acdPaaUdpCfgIgmpLvDlyThresh	1.3.6.1.4.1.22420.2.5.3.1.37	Unsigned32	read-write	The maximum consecutive leave delay samples allowed greater than the maximum leave delay.
U32 acdPaaUdpCfgIgmpMaxJoinDly	1.3.6.1.4.1.22420.2.5.3.1.33	Unsigned32	read-write	The maximum join delay objective.
U32 acdPaaUdpCfgIgmpMaxLvDly	1.3.6.1.4.1.22420.2.5.3.1.36	Unsigned32	read-write	The maximum join delay objective.
U32 acdPaaUdpCfgIgmpOneWayJoinPeriod	1.3.6.1.4.1.22420.2.5.3.1.31	Unsigned32	read-write	The IGMP One-way join period is the amount of time to wait from the beginning of the period before an IGMP join request is sent out.
U32 acdPaaUdpCfgIgmpRefPeriod	1.3.6.1.4.1.22420.2.5.3.1.32	Unsigned32	read-write	The IGMP reference period is the total amount of time in which we sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period).
IP acdPaaUdpCfgIPv4DstAddr	1.3.6.1.4.1.22420.2.5.3.1.20	IpAddress	read-write	The destination IP address used to reach the peer PAA instance.
STR acdPaaUdpCfgName	1.3.6.1.4.1.22420.2.5.3.1.2	DisplayString	read-write	This is a string to identify this PAA instance.
U32 acdPaaUdpCfgOneWayAvgDelayThresh	1.3.6.1.4.1.22420.2.5.3.1.27	Unsigned32	read-write	Two-way average delay threshold.
U32 acdPaaUdpCfgOneWayAvgDvThresh	1.3.6.1.4.1.22420.2.5.3.1.12	Unsigned32	read-write	One-way average delay variation threshold.
U32 acdPaaUdpCfgOneWayDelayMax	1.3.6.1.4.1.22420.2.5.3.1.25	Unsigned32	read-write	Maximum allowed instantaneous delay.
U32 acdPaaUdpCfgOneWayDelayThresh	1.3.6.1.4.1.22420.2.5.3.1.26	Unsigned32	read-write	Nbr consecutive delay > max before alert.
U32 acdPaaUdpCfgOneWayDvMax	1.3.6.1.4.1.22420.2.5.3.1.10	Unsigned32	read-write	Maximum allowed instantaneous delay variation.
U32 acdPaaUdpCfgOneWayDvThresh	1.3.6.1.4.1.22420.2.5.3.1.11	Unsigned32	read-write	Number of consecutive delay variations greater than the threshold.
U32 acdPaaUdpCfgOneWayRefPeriod	1.3.6.1.4.1.22420.2.5.3.1.9	Unsigned32	read-write	Reference period in milliseconds for one-way measurement.
U32 acdPaaUdpCfgOperationMode	1.3.6.1.4.1.22420.2.5.3.1.30	Unsigned32	read-write	PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink
U32 acdPaaUdpCfgPeerID	1.3.6.1.4.1.22420.2.5.3.1.29	Unsigned32	read-write	Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdPaaUdpCfgPktLossRefPeriod	1.3.6.1.4.1.22420.2.5.3.1.7	Unsigned32	read-write	Reference period in milliseconds for packet loss measurement.
U32 acdPaaUdpCfgPktLossThresh	1.3.6.1.4.1.22420.2.5.3.1.8	Unsigned32	read-write	Allowed packet loss, in pecentage (%).
U32 acdPaaUdpCfgPktLossThreshExt	1.3.6.1.4.1.22420.2.5.3.1.39	Unsigned32	read-write	Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
U32 acdPaaUdpCfgPktSize	1.3.6.1.4.1.22420.2.5.3.1.4	Unsigned32	read-write	Transmit packet size.
U32 acdPaaUdpCfgPortNumber	1.3.6.1.4.1.22420.2.5.3.1.21	Unsigned32	read-write	The source UDP port number on which to listen for peer PAA samples.
U32 acdPaaUdpCfgSamplingPeriod	1.3.6.1.4.1.22420.2.5.3.1.5	Unsigned32	read-write	Interval in milliseconds at which PAA issues PAA measurement packets.
INT acdPaaUdpCfgState	1.3.6.1.4.1.22420.2.5.3.1.3	INTEGER	read-write	Configuration state of this PAA entry.
acdPaaUdpCfgTable	1.3.6.1.4.1.22420.2.5.3		not-accessible	Configuration table of all UDP PAA entries.
U32 acdPaaUdpCfgTwoWayAvgDelayThresh	1.3.6.1.4.1.22420.2.5.3.1.16	Unsigned32	read-write	Two-way average delay threshold.
U32 acdPaaUdpCfgTwoWayAvgDvThresh	1.3.6.1.4.1.22420.2.5.3.1.19	Unsigned32	read-write	Two-way average delay variation threshold.
U32 acdPaaUdpCfgTwoWayDelayMax	1.3.6.1.4.1.22420.2.5.3.1.14	Unsigned32	read-write	Maximum allowed instantaneous delay.
U32 acdPaaUdpCfgTwoWayDelayThresh	1.3.6.1.4.1.22420.2.5.3.1.15	Unsigned32	read-write	Number of consecutive delays greater than the threshold.
U32 acdPaaUdpCfgTwoWayDvMax	1.3.6.1.4.1.22420.2.5.3.1.17	Unsigned32	read-write	Maximum allowed instantaneous delay variation.
U32 acdPaaUdpCfgTwoWayDvThresh	1.3.6.1.4.1.22420.2.5.3.1.18	Unsigned32	read-write	Number of consecutive delay variations greater than the threshold.
U32 acdPaaUdpCfgTwoWayRefPeriod	1.3.6.1.4.1.22420.2.5.3.1.13	Unsigned32	read-write	Reference period in milliseconds for two-way measurement.
U32 acdPaaUdpCfgVlan1PbitsValue	1.3.6.1.4.1.22420.2.5.3.1.23	Unsigned32	read-write	The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
U32 acdPaaUdpCfgVlan1PriorityExpected	1.3.6.1.4.1.22420.2.5.3.1.42	Unsigned32	read-write	The expected VLAN 1 priority value.
T/F acdPaaUdpCfgVlan1PriorityTxRxCoupling	1.3.6.1.4.1.22420.2.5.3.1.41	TruthValue	read-write	Indicates the status of VLAN 1 priority TX/RX coupling.
T/F acdPaaUdpCfgVlan1PriorityValidation	1.3.6.1.4.1.22420.2.5.3.1.40	TruthValue	read-write	Indicates the status of VLAN 1 priority validation.
U32 acdPaaUdpCfgVlan2PbitsValue	1.3.6.1.4.1.22420.2.5.3.1.24	Unsigned32	read-write	The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.

RFC description

Vendor-private MIB for ACD (Automatic Call Distribution) systems; manages phone agents and queue allocation objects.

Start monitoring Accedian MetroNID devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACD-PAA-MIB