ACD-SA-MIB

All MIBs › ACD-SA-MIB

Organization: Accedian Networks, Inc.

Last Updated: 2011-12-21

Category: Vendor: Accedian

Description: Manages service activation test capabilities on Accedian MetroNID devices for Ethernet service turn-up and verification.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACD-SA-MIB?

The ACD-SA-MIB is a vendor-specific SNMP module from Accedian Networks used on its MetroNID Ethernet demarcation devices to manage service activation (SA) testing similar to ITU-T Y.1564-style validation. It exposes configuration objects for defining test services, associated metric configuration objects, and notification definitions for reporting test outcomes. It is used mainly for monitoring and controlling service turn-up test runs rather than general chassis hardware health, letting an operator start/stop tests, track the administrative state of a service test, and read reporting-period and window-size parameters used in loss/availability calculations. It is a self-contained enterprise MIB typically deployed alongside other Accedian MIBs covering general performance monitoring and system status on the same NID. It's typically used by carrier Ethernet service providers validating SLA compliance at circuit turn-up and during periodic re-certification of business Ethernet services, often after an ACD-SA-MIB download to load the module into their test and monitoring tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-SA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Accedian MetroNID Ethernet demarcation device
carrier Ethernet NID/NTU

Monitoring Examples

An administrator would poll acdSaServiceConfigTable entries indexed by acdSaServiceIndex to check acdSaServiceConfigAdminState and confirm whether an activation test is running, idle, or completed for a given acdSaServiceConfigName. Fields like acdSaServiceConfigReportingPeriod, acdSaServiceConfigUaWindowSize and acdSaServiceConfigHliWindowSize configure the unavailability and high-loss-interval windows used by the throughput/availability test. If a test enters an unexpected admin state or an acdSaNotifications trap fires, it typically signals the Ethernet service under test failed to meet configured performance thresholds.

What Can Be Monitored

service activation test admin state
test reporting period
unavailability window size
high-loss-interval window size
service test configuration status
activation test notifications

Imported Objects

From ACCEDIAN-SMI

acdMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
acdSa	1.3.6.1.4.1.22420.2.12			The Service Availability database for this Accedian Networks device.
acdSaCompliance	1.3.6.1.4.1.22420.2.12.2.1.1			The compliance statement for support of the ACD-SA-MIB module.
acdSaCompliances	1.3.6.1.4.1.22420.2.12.2.1
acdSaConfig	1.3.6.1.4.1.22420.2.12.1.1
acdSaConformance	1.3.6.1.4.1.22420.2.12.2
acdSaCounter	1.3.6.1.4.1.22420.2.12.1.2
acdSaGroups	1.3.6.1.4.1.22420.2.12.2.2
acdSaMetricConfigEntry	1.3.6.1.4.1.22420.2.12.1.1.2.1		not-accessible	An entry consisting of all settings for a Metric.
acdSaMetricConfigGroup	1.3.6.1.4.1.22420.2.12.2.2.2			Objects for the Metric configuration Group.
STR acdSaMetricConfigName	1.3.6.1.4.1.22420.2.12.1.1.2.1.3	DisplayString	read-create	A unique name used to identify the Metric.
ROW acdSaMetricConfigRowStatus	1.3.6.1.4.1.22420.2.12.1.1.2.1.2	RowStatus	read-create	All columns must have a valid value before a row can be activated. To create a new Service you shall provide the a unique name for an empty row with the RowStatus set to Create and Go. To delete the VLAN set you need to set the RowStatus to destroy.
STR acdSaMetricConfigSrcName	1.3.6.1.4.1.22420.2.12.1.1.2.1.4	DisplayString	read-create	A unique name used to identify the source metric.
acdSaMetricConfigTable	1.3.6.1.4.1.22420.2.12.1.1.2		not-accessible	The .....
U32 acdSaMetricConfigThreshold	1.3.6.1.4.1.22420.2.12.1.1.2.1.6	Unsigned32	read-write	Indicates the delay threshold for this metric when type is one of metric delay parameters (in micro-seconds). Indicates the packet loss threshold for this metric when type is one of packet-loss parameter expressed in millionth of percent (1,000,000 is 1%).
ACD acdSaMetricConfigType	1.3.6.1.4.1.22420.2.12.1.1.2.1.5	AcdSaMetricType	read-write	Enable or disable the Service Availability entry.
U32 acdSaMetricCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.4.1.3	Unsigned32	read-only	A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaMetricCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.4.1		not-accessible	An entry consisting of all counters for a Metric.
acdSaMetricCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.6			Objects for the Metric Counter Group.
acdSaMetricCounterTable	1.3.6.1.4.1.22420.2.12.1.2.4		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaMetricCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.4.1.2	Unsigned32	read-only	The UaTime is a measure of the time a metric has been unavailable during this sampling interval.
ACD acdSaMetricCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.4.1.1	AcdSaValidFlag	read-only	Indicates the validity of the metric counter during this sampling interval.
U32 acdSaMetricHistCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.5.1.6	Unsigned32	read-only	A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaMetricHistCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.5.1		not-accessible	An entry consisting of all counters for a Metric.
acdSaMetricHistCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.7			Objects for the Metric History Counter Group.
U32 acdSaMetricHistCounterID	1.3.6.1.4.1.22420.2.12.1.2.5.1.1	Unsigned32	not-accessible	Unique value for each Metric instance. This value follows the ordering of the service table.
DAT acdSaMetricHistCounterIntervalEnd	1.3.6.1.4.1.22420.2.12.1.2.5.1.3	DateAndTime	read-only	This is the time of the end of this entry.
U32 acdSaMetricHistCounterPeriodIndex	1.3.6.1.4.1.22420.2.12.1.2.5.1.2	Unsigned32	not-accessible	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period.
acdSaMetricHistCounterTable	1.3.6.1.4.1.22420.2.12.1.2.5		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaMetricHistCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.5.1.5	Unsigned32	read-only	The UaTime is a measure of the time a metric has been unavailable during this sampling interval.
ACD acdSaMetricHistCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.5.1.4	AcdSaValidFlag	read-only	Indicates the validity of the metric counter during this sampling interval.
U32 acdSaMetricIndex	1.3.6.1.4.1.22420.2.12.1.1.2.1.1	Unsigned32	not-accessible	Index for each metric instance.
U32 acdSaMetricMonoCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.6.1.3	Unsigned32	read-only	A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaMetricMonoCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.6.1		not-accessible	An entry consisting of all counters for a Metric.
acdSaMetricMonoCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.8			Objects for the Metric History Counter Group.
acdSaMetricMonoCounterTable	1.3.6.1.4.1.22420.2.12.1.2.6		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaMetricMonoCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.6.1.2	Unsigned32	read-only	The UaTime is a measure of the time a metric has been unavailable during this sampling interval.
ACD acdSaMetricMonoCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.6.1.1	AcdSaValidFlag	read-only	Indicates the validity of the metric counter during this sampling interval.
acdSaMIBObjects	1.3.6.1.4.1.22420.2.12.1
acdSaNotifications	1.3.6.1.4.1.22420.2.12.0
ACD acdSaServiceConfigAdminState	1.3.6.1.4.1.22420.2.12.1.1.1.1.4	AcdSaAdminStateFlag	read-write	Administrative state is(1) or oos(2).
acdSaServiceConfigEntry	1.3.6.1.4.1.22420.2.12.1.1.1.1		not-accessible	An entry consisting of all settings for a Service.
acdSaServiceConfigGroup	1.3.6.1.4.1.22420.2.12.2.2.1			Objects for the Service configuration Group.
U32 acdSaServiceConfigHliWindowSize	1.3.6.1.4.1.22420.2.12.1.1.1.1.7	Unsigned32	read-write	The number of consecutive Time Intervals used to assess High Loss Intervals for this instance.
STR acdSaServiceConfigName	1.3.6.1.4.1.22420.2.12.1.1.1.1.3	DisplayString	read-create	A unique name used to identify the Service.
U32 acdSaServiceConfigReportingPeriod	1.3.6.1.4.1.22420.2.12.1.1.1.1.5	Unsigned32	read-write	A reporting period over which availability counters are evaluated in addition to the monotonic counters (In minutes).
ROW acdSaServiceConfigRowStatus	1.3.6.1.4.1.22420.2.12.1.1.1.1.2	RowStatus	read-create	All columns must have a valid value before a row can be activated. To create a new Service you shall provide a unique name for an empty row with the RowStatus set to Create and Go.
acdSaServiceConfigTable	1.3.6.1.4.1.22420.2.12.1.1.1		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaServiceConfigTimeInterval	1.3.6.1.4.1.22420.2.12.1.1.1.1.8	Unsigned32	read-write	The interval of time during which the metric is evaluated. Allowed values are 1, 5, 10, 20, or 60.
U32 acdSaServiceConfigUaWindowSize	1.3.6.1.4.1.22420.2.12.1.1.1.1.6	Unsigned32	read-write	The number of consecutive seconds over which to assess unavailability.
U32 acdSaServiceCounterAvailRatio	1.3.6.1.4.1.22420.2.12.1.2.1.1.6	Unsigned32	read-only	Indicates the availability ratio in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceCounterChliRatio	1.3.6.1.4.1.22420.2.12.1.2.1.1.10	Unsigned32	read-only	The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.1.1.9	Unsigned32	read-only	The CHLI time is a counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaServiceCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.1.1		not-accessible	An entry consisting of all counters for a Service.
U32 acdSaServiceCounterGaps	1.3.6.1.4.1.22420.2.12.1.2.1.1.7	Unsigned32	read-only	The gap shall be the number of time the state change from available to unavailable.
acdSaServiceCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.3			Objects for the Service Counter Group.
U32 acdSaServiceCounterLargestGap	1.3.6.1.4.1.22420.2.12.1.2.1.1.8	Unsigned32	read-only	The largest gap shall be the largest number of consecutive unavailable second.
U32 acdSaServiceCounterMaintTime	1.3.6.1.4.1.22420.2.12.1.2.1.1.5	Unsigned32	read-only	The MaintTime is a measure of the time a service has been in maintenance during this sampling interval.
U32 acdSaServiceCounterPeriodIndex	1.3.6.1.4.1.22420.2.12.1.2.1.1.1	Unsigned32	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period.
acdSaServiceCounterTable	1.3.6.1.4.1.22420.2.12.1.2.1		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaServiceCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.1.1.4	Unsigned32	read-only	The UaTime is a measure of the time a service has been unavailable during this sampling interval.
U32 acdSaServiceCounterUpTime	1.3.6.1.4.1.22420.2.12.1.2.1.1.3	Unsigned32	read-only	Uptime is a measure of the time a service has been up during this sampling interval.
ACD acdSaServiceCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.1.1.2	AcdSaValidFlag	read-only	Indicates the validity of the service counter during this sampling interval.
U32 acdSaServiceHistCounterAvailRatio	1.3.6.1.4.1.22420.2.12.1.2.2.1.7	Unsigned32	read-only	Indicates the availability ratio in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceHistCounterChliRatio	1.3.6.1.4.1.22420.2.12.1.2.2.1.11	Unsigned32	read-only	The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceHistCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.2.1.10	Unsigned32	read-only	The CHLI time is a counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaServiceHistCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.2.1		not-accessible	An entry consisting of all counters for a Service.
U32 acdSaServiceHistCounterGaps	1.3.6.1.4.1.22420.2.12.1.2.2.1.8	Unsigned32	read-only	The gap shall be the number of time the state change from available to unavailable.
acdSaServiceHistCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.4			Objects for the Service History Counter Group.
DAT acdSaServiceHistCounterIntervalEnd	1.3.6.1.4.1.22420.2.12.1.2.2.1.2	DateAndTime	read-only	This is the time of the end of this entry.
U32 acdSaServiceHistCounterLargestGap	1.3.6.1.4.1.22420.2.12.1.2.2.1.9	Unsigned32	read-only	The largest gap shall be the largest number of consecutive unavailable second.
U32 acdSaServiceHistCounterMaintTime	1.3.6.1.4.1.22420.2.12.1.2.2.1.6	Unsigned32	read-only	The MaintTime is a measure of the time a service has been in maintenance during this sampling interval.
U32 acdSaServiceHistCounterPeriodIndex	1.3.6.1.4.1.22420.2.12.1.2.2.1.1	Unsigned32	not-accessible	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period.
acdSaServiceHistCounterTable	1.3.6.1.4.1.22420.2.12.1.2.2		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaServiceHistCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.2.1.5	Unsigned32	read-only	The UaTime is a measure of the time a service has been unavailable during this sampling interval.
U32 acdSaServiceHistCounterUpTime	1.3.6.1.4.1.22420.2.12.1.2.2.1.4	Unsigned32	read-only	Uptime is a measure of the time a service has been up during this sampling interval.
ACD acdSaServiceHistCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.2.1.3	AcdSaValidFlag	read-only	Indicates the validity of the service counter during this sampling interval.
U32 acdSaServiceIndex	1.3.6.1.4.1.22420.2.12.1.1.1.1.1	Unsigned32	not-accessible	Unique value for each service instance.
U32 acdSaServiceMonoCounterAvailRatio	1.3.6.1.4.1.22420.2.12.1.2.3.1.5	Unsigned32	read-only	Indicates the availability ratio in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceMonoCounterChliRatio	1.3.6.1.4.1.22420.2.12.1.2.3.1.9	Unsigned32	read-only	The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).
U32 acdSaServiceMonoCounterChliTime	1.3.6.1.4.1.22420.2.12.1.2.3.1.8	Unsigned32	read-only	A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.
acdSaServiceMonoCounterEntry	1.3.6.1.4.1.22420.2.12.1.2.3.1		not-accessible	An entry consisting of all monotonic counters for a Service.
U32 acdSaServiceMonoCounterGaps	1.3.6.1.4.1.22420.2.12.1.2.3.1.6	Unsigned32	read-only	The gap shall be the number of time the state change from available to unavailable.
acdSaServiceMonoCounterGroup	1.3.6.1.4.1.22420.2.12.2.2.5			Objects for the Service Monotonic Counter Group.
U32 acdSaServiceMonoCounterLargestGap	1.3.6.1.4.1.22420.2.12.1.2.3.1.7	Unsigned32	read-only	The largest gap shall be the largest number of consecutive unavailable second.
U32 acdSaServiceMonoCounterMaintTime	1.3.6.1.4.1.22420.2.12.1.2.3.1.4	Unsigned32	read-only	The MaintTime is a measure of the time a service has been in maintenance during this sampling interval.
acdSaServiceMonoCounterTable	1.3.6.1.4.1.22420.2.12.1.2.3		not-accessible	This table contains all instance of service availability of this unit.
U32 acdSaServiceMonoCounterUaTime	1.3.6.1.4.1.22420.2.12.1.2.3.1.3	Unsigned32	read-only	The UaTime is a measure of the time a service has been unavailable during this sampling interval.
U32 acdSaServiceMonoCounterUpTime	1.3.6.1.4.1.22420.2.12.1.2.3.1.2	Unsigned32	read-only	Uptime is a measure of the time a service has been up during this sampling interval.
ACD acdSaServiceMonoCounterValidFlag	1.3.6.1.4.1.22420.2.12.1.2.3.1.1	AcdSaValidFlag	read-only	Indicates the validity of the service counter during this sampling interval.
ACD acdSaServiceStatusAdminState	1.3.6.1.4.1.22420.2.12.1.3.1.1.3	AcdSaAdminStateFlag	read-only	Administrative state is one of is(1) or oos(2).
acdSaServiceStatusEntry	1.3.6.1.4.1.22420.2.12.1.3.1.1		not-accessible	An entry consisting of all status for a Service.
acdSaServiceStatusGroup	1.3.6.1.4.1.22420.2.12.2.2.9			Objects for the Service Status Group.
U32 acdSaServiceStatusID	1.3.6.1.4.1.22420.2.12.1.3.1.1.1	Unsigned32	not-accessible	Unique value for each service instance.
STR acdSaServiceStatusName	1.3.6.1.4.1.22420.2.12.1.3.1.1.2	DisplayString	read-only	A unique name used to identify the Service.
G32 acdSaServiceStatusNbrMetrics	1.3.6.1.4.1.22420.2.12.1.3.1.1.5	Gauge32	read-only	The number of metrics associated with this Service instance.
ACD acdSaServiceStatusOperState	1.3.6.1.4.1.22420.2.12.1.3.1.1.4	AcdSaOperStateFlag	read-only	Operational state is one of is(1), oos(2) or oosAu (3).
acdSaServiceStatusTable	1.3.6.1.4.1.22420.2.12.1.3.1		not-accessible	This table contains all instance of service availability of this unit.
acdSaStatus	1.3.6.1.4.1.22420.2.12.1.3

RFC description

The Service Availability database management for Accedian Networks devices, supporting ETH-SLM metrics.

Start monitoring Accedian Ethernet demarcation devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACD-SA-MIB

What Is ACD-SA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description