ACD-POLICY-MIB

All MIBs › ACD-POLICY-MIB

Organization: Accedian Networks, Inc.

Last Updated: 2011-10-10

Category: Vendor: Accedian

Description: Manages traffic policy profiles and service policy configuration on Accedian MetroNID Ethernet performance devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACD-POLICY-MIB?

ACD-POLICY-MIB is Accedian Networks' vendor-specific MIB for configuring traffic policy profiles on its MetroNID Ethernet demarcation and performance-monitoring devices. It exposes configuration data defining traffic filter, drop, monitoring, and rate-regulation policies applied to Ethernet traffic flows on the device. Its monitoring relevance is chiefly around software/configuration status: acdPolicyMonitorEnable and acdPolicyMonitorIndex indicate whether traffic on a given policy is actively being measured, while acdPolicyDropEnable and acdPolicyRegulatorEnable reveal whether traffic-shaping/dropping actions are active, letting an operator confirm a QoS or security policy is correctly enforced on the device. It defines its own notifications and conformance groups and does not show explicit dependency on other MIBs here, appearing to be a self-contained Accedian policy module that likely complements Accedian's broader performance-monitoring MIB suite. It is typically deployed at Ethernet service demarcation points in carrier/enterprise networks where MetroNID devices enforce and measure per-flow traffic policies for SLA compliance. Network engineers evaluating or troubleshooting this functionality can download the ACD-POLICY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Accedian Networks MetroNID Ethernet demarcation/performance device

Monitoring Examples

An admin would read acdPolicyTable (via acdPolicyID/acdPolicyListID/acdPolicyEntryID) to confirm a specific traffic filter policy (acdPolicyFilterType/acdPolicyFilterIndex) is enabled (acdPolicyEnable) and whether it is set to drop (acdPolicyDropEnable) or merely monitor (acdPolicyMonitorEnable) matching traffic. acdPolicyRegulatorEnable indicates whether rate-limiting/shaping is active for that policy entry. Together these let an operator verify that an SLA-enforcing traffic policy configured on a MetroNID device is active as intended rather than silently disabled.

What Can Be Monitored

policy enable/disable state
traffic filter type
drop action status
monitoring enable status
rate regulator enable status

Imported Objects

From ACCEDIAN-SMI

acdMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
TruthValue

How to Use in IPNetwork Monitor

Example using acdPolicyStatsInPkts OID:

Select an Accedian MetroNID device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type acdPolicyStatsInPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of packets received on this MAC and matching this policy. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in Packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acdPolicy	1.3.6.1.4.1.22420.2.3			The Policies database for this Accedian Networks device.
INT acdPolicyAction	1.3.6.1.4.1.22420.2.3.1.1.13	INTEGER	read-write	Action that will be applied to traffic that matches the filter.
acdPolicyCompliance	1.3.6.1.4.1.22420.2.3.6.1.1			The compliance statement for support of the ACD-POLICY-MIB module.
acdPolicyCompliances	1.3.6.1.4.1.22420.2.3.6.1
acdPolicyConformance	1.3.6.1.4.1.22420.2.3.6
T/F acdPolicyCosMappingChoice1En	1.3.6.1.4.1.22420.2.3.1.1.18	TruthValue	read-write	This indicates if this choice is used.
U32 acdPolicyCosMappingChoice1Profile	1.3.6.1.4.1.22420.2.3.1.1.20	Unsigned32	read-write	CoS profile used to map the input traffic to an L2 class of service.
U32 acdPolicyCosMappingChoice1RegSet	1.3.6.1.4.1.22420.2.3.1.1.21	Unsigned32	read-write	Bandwidth regulator apply to regulate traffic.
INT acdPolicyCosMappingChoice1Type	1.3.6.1.4.1.22420.2.3.1.1.19	INTEGER	read-write	The traffic mapping is accomplished using the selected field in the incoming traffic. This field can be p-bits in 802.1Q, 802.1Q-in-Q tags IP precedence bits in IPv4 TOS byte or DSCP bits in IPv4 DSCP byte.
T/F acdPolicyCosMappingChoice2En	1.3.6.1.4.1.22420.2.3.1.1.22	TruthValue	read-write	This indicates if this choice is used.
U32 acdPolicyCosMappingChoice2Profile	1.3.6.1.4.1.22420.2.3.1.1.24	Unsigned32	read-write	CoS profile used to map the input traffic to an L2 class of service.
U32 acdPolicyCosMappingChoice2RegSet	1.3.6.1.4.1.22420.2.3.1.1.25	Unsigned32	read-write	Bandwidth regulator apply to regulate traffic.
INT acdPolicyCosMappingChoice2Type	1.3.6.1.4.1.22420.2.3.1.1.23	INTEGER	read-write	The traffic mapping is accomplished using the selected field in the incoming traffic. This field can be p-bits in 802.1Q, 802.1Q-in-Q tags IP precedence bits in IPv4 TOS byte or DSCP bits in IPv4 DSCP byte.
INT acdPolicyCosMappingPcpAction	1.3.6.1.4.1.22420.2.3.1.1.17	INTEGER	read-write	This section selects the PCP (Priority Code Points) action to perform. Possible values are: Preserve: Keep the PCP bits if the packet is already tagged Direct: Add the default PCP value Map: Use a CoS profile for PCP selection For each PCP action there is one or two traffic mapping choices and the default PCP bits to use if the packet does not match the first and the second choices.
U32 acdPolicyDefaultMappingGreenCfi	1.3.6.1.4.1.22420.2.3.1.1.26	Unsigned32	read-write	The default CFI value to be applied if the Encapsulation is Push. This would only be applied if the traffic does not match the first and second choices and if the result color is green.
U32 acdPolicyDefaultMappingGreenPrior	1.3.6.1.4.1.22420.2.3.1.1.27	Unsigned32	read-write	The default PCP values to be applied if the Encapsulation is Push. This would only be applied if the traffic does not match the first and second choices and if the result color is green.
U32 acdPolicyDefaultMappingYellowCfi	1.3.6.1.4.1.22420.2.3.1.1.28	Unsigned32	read-write	The default CFI value to be applied if the Encapsulation is Push. This would only be applied if the traffic does not match the first and second choices and if the result color is green.
U32 acdPolicyDefaultMappingYellowPrior	1.3.6.1.4.1.22420.2.3.1.1.29	Unsigned32	read-write	The default PCP values to be applied if the Encapsulation is Push. This would only be applied if the traffic does not match the first and second choices and if the result color is green.
acdPolicyDeprecatedGroup	1.3.6.1.4.1.22420.2.3.6.2.4			Objects for the policy deprecated Group.
T/F acdPolicyDropEnable	1.3.6.1.4.1.22420.2.3.1.1.7	TruthValue	read-write	******* THIS OBJECT IS DEPRECATED ******** This object has been deprecated in favour of acdPolicyAction. This indicates if this policy is programmed to drop or let the traffic pass the processing engine.
T/F acdPolicyEnable	1.3.6.1.4.1.22420.2.3.1.1.4	TruthValue	read-write	Enable or disable the Policy in the packet processing Engine.
acdPolicyEntry	1.3.6.1.4.1.22420.2.3.1.1		not-accessible	A Policy is a Filter applied to a specific MAC to block, permit or only count a specific traffic.
U32 acdPolicyEntryID	1.3.6.1.4.1.22420.2.3.1.1.3	Unsigned32	read-only	This object identifies the order in the List.
INT acdPolicyEvcMappingEncaps	1.3.6.1.4.1.22420.2.3.1.1.14	INTEGER	read-write	Action that will be applied to traffic that matches the filter.
INT acdPolicyEvcMappingEtype	1.3.6.1.4.1.22420.2.3.1.1.15	INTEGER	read-write	The ethertype of the VLAN to be added if the encapsulation is set to push. Possible values are customer VLAN (cvlan) and service VLAN (svlan).
U32 acdPolicyEvcMappingVlanId	1.3.6.1.4.1.22420.2.3.1.1.16	Unsigned32	read-write	The VLAN ID to be added if the encapsulation is set to push. Its value ranges from 0 to 4095.
U32 acdPolicyFilterIndex	1.3.6.1.4.1.22420.2.3.1.1.6	Unsigned32	read-write	This indicates which filter index is programmed in this entry. With the filter type we can retrieve the specific filter in the filter database.
INT acdPolicyFilterType	1.3.6.1.4.1.22420.2.3.1.1.5	INTEGER	read-write	This indicates which filter type is programmed in this entry. With the filter index we can retrieve the specific filter in the filter database.
acdPolicyGroup	1.3.6.1.4.1.22420.2.3.6.2.1			Objects for the policy configuration Group.
acdPolicyGroups	1.3.6.1.4.1.22420.2.3.6.2
U32 acdPolicyHistStatsDuration	1.3.6.1.4.1.22420.2.3.3.1.6	Unsigned32	read-only	The interval in seconds over which the data is sampled for this entry.
acdPolicyHistStatsEntry	1.3.6.1.4.1.22420.2.3.3.1		not-accessible	An Entry consists in a bytes and a packets counters.
U32 acdPolicyHistStatsEntryID	1.3.6.1.4.1.22420.2.3.3.1.3	Unsigned32	read-only	This object identifies the order in the List.
acdPolicyHistStatsGroup	1.3.6.1.4.1.22420.2.3.6.2.3			Objects for the policy historical tatistics Group.
U32 acdPolicyHistStatsID	1.3.6.1.4.1.22420.2.3.3.1.1	Unsigned32	not-accessible	Unique value for each policy counter. Its value ranges from 1 to MAXINT (4 bytes).
C64 acdPolicyHistStatsInHCOctets	1.3.6.1.4.1.22420.2.3.3.1.13	Counter64	read-only	The total number of Octets received on this MAC and matching this policy during this sampling interval.
C64 acdPolicyHistStatsInHCPkts	1.3.6.1.4.1.22420.2.3.3.1.10	Counter64	read-only	The total number of packets received on this MAC and matching this policy during this sampling interval.
C64 acdPolicyHistStatsInHCPktsErr	1.3.6.1.4.1.22420.2.3.3.1.16	Counter64	read-only	The total number of errored packets received on this MAC and matching this policy during this sampling interval.
C32 acdPolicyHistStatsInOctets	1.3.6.1.4.1.22420.2.3.3.1.11	Counter32	read-only	The total number of Octets received on this MAC and matching this policy during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInOverflowOctets, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCOctets.
C32 acdPolicyHistStatsInOverflowOctets	1.3.6.1.4.1.22420.2.3.3.1.12	Counter32	read-only	The number of times the associated acdPolicyHistStatsInOctets counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInOctets, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCOctets.
C32 acdPolicyHistStatsInOverflowPkts	1.3.6.1.4.1.22420.2.3.3.1.9	Counter32	read-only	The number of times the associated acdPolicyStatsInPkts counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInPkts, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCPkts.
C32 acdPolicyHistStatsInOverflowPktsErr	1.3.6.1.4.1.22420.2.3.3.1.15	Counter32	read-only	The number of times the associated acdPolicyStatsInPktsErr counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInPktsErr, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCPktsErr.
C32 acdPolicyHistStatsInPkts	1.3.6.1.4.1.22420.2.3.3.1.8	Counter32	read-only	The total number of packets received on this MAC and matching this policy during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInOverflowPkts, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCPkts.
C32 acdPolicyHistStatsInPktsErr	1.3.6.1.4.1.22420.2.3.3.1.14	Counter32	read-only	The total number of errored packets received on this MAC and matching this policy during this sampling interval. This is a 32 bits counter. Combined with acdPolicyHistStatsInOverflowPktsErr, it provides the equivalent of the 64 bits counter acdPolicyHistStatsInHCPktsErr.
DAT acdPolicyHistStatsIntervalEnd	1.3.6.1.4.1.22420.2.3.3.1.7	DateAndTime	read-only	This is the time of the end of this entry.
U32 acdPolicyHistStatsListID	1.3.6.1.4.1.22420.2.3.3.1.2	Unsigned32	read-only	This object identifies in wich List the entry is.
U32 acdPolicyHistStatsSampleIndex	1.3.6.1.4.1.22420.2.3.3.1.4	Unsigned32	not-accessible	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same policy instance. This index starts at 1 and increases by one as each new sample.
INT acdPolicyHistStatsStatus	1.3.6.1.4.1.22420.2.3.3.1.5	INTEGER	read-only	The status of this acdPolicyHistStats entry.
acdPolicyHistStatsTable	1.3.6.1.4.1.22420.2.3.3		not-accessible	Table of all counters associated with each policy.
U32 acdPolicyID	1.3.6.1.4.1.22420.2.3.1.1.1	Unsigned32	not-accessible	Unique value for each policy entry. Its value ranges from 1 to MAXINT (4 bytes).
acdPolicyList	1.3.6.1.4.1.22420.2.3.5.1
acdPolicyListEntry	1.3.6.1.4.1.22420.2.3.5.1.1.1		not-accessible	Each entry in this table describe a policy list contains in this unit.
U32 acdPolicyListEntryID	1.3.6.1.4.1.22420.2.3.5.1.1.1.1	Unsigned32	not-accessible	Unique value for each list. This value is the same than acdPolicyListID for each entry in acdPolicyTable.
acdPolicyListGroup	1.3.6.1.4.1.22420.2.3.6.2.5			Objects for the policy list information Group.
U32 acdPolicyListID	1.3.6.1.4.1.22420.2.3.1.1.2	Unsigned32	read-only	This object identifies in wich List the entry is.
STR acdPolicyListName	1.3.6.1.4.1.22420.2.3.5.1.1.1.2	DisplayString	read-only	This is a string to identify the policy list.
U32 acdPolicyListNbrEntries	1.3.6.1.4.1.22420.2.3.5.1.1.1.3	Unsigned32	read-only	The number of entries currently in this list.
acdPolicyListTable	1.3.6.1.4.1.22420.2.3.5.1.1		not-accessible	Table of all Policy list contains in this unit.
acdPolicyMIBObjects	1.3.6.1.4.1.22420.2.3.5
T/F acdPolicyMonitorEnable	1.3.6.1.4.1.22420.2.3.1.1.8	TruthValue	read-write	This indicates if this policy is programmed to send the traffic to one of the monitoring port.
INT acdPolicyMonitorIndex	1.3.6.1.4.1.22420.2.3.1.1.9	INTEGER	read-write	This indicates which monitor port is programmed to send the traffic matching this policy entry.
acdPolicyNotifications	1.3.6.1.4.1.22420.2.3.4
OID acdPolicyOutgoingPort	1.3.6.1.4.1.22420.2.3.1.1.30	OBJECT IDENTIFIER	read-write	The OID value used to identify the outgoing port for this policy. In order to identify a particular port, this object shall identify the instance of the acdPortConfigIndex object, defined in ACD-PORT-MIB, for the desired port. For example, if an entry is set to port 4, this object would be set to acdPortConfigIndex.4 and by querying the acdPortConfigName.4 the user can retrieve the name of this port.
acdPolicyPort	1.3.6.1.4.1.22420.2.3.5.2
acdPolicyPortEntry	1.3.6.1.4.1.22420.2.3.5.2.1.1		not-accessible	A Policy port entry is the mapping between this port and a policy list.
U32 acdPolicyPortEntryID	1.3.6.1.4.1.22420.2.3.5.2.1.1.1	Unsigned32	not-accessible	Unique value for each port. This value is the same than acdPortConfigIndex used in ACD-PORT-MIB.
acdPolicyPortGroup	1.3.6.1.4.1.22420.2.3.6.2.6			Objects for the policy port mapping Group.
U32 acdPolicyPortListID	1.3.6.1.4.1.22420.2.3.5.2.1.1.2	Unsigned32	read-only	Numerical value coresponding to acdPolicyListEntryID.
acdPolicyPortTable	1.3.6.1.4.1.22420.2.3.5.2.1		not-accessible	Table of all Port and the correspondant policy list.
T/F acdPolicyRegulatorEnable	1.3.6.1.4.1.22420.2.3.1.1.10	TruthValue	read-write	This indicates if this policy use or not a bandwidth regulator.
U32 acdPolicyRegulatorIndex	1.3.6.1.4.1.22420.2.3.1.1.11	Unsigned32	read-write	This indicates which bandwidth regulator index is programmed in this policy entry.
INT acdPolicyRegulatorMarking	1.3.6.1.4.1.22420.2.3.1.1.12	INTEGER	read-write	This indicates the pre-marking color associated with this policy.
acdPolicyStatsEntry	1.3.6.1.4.1.22420.2.3.2.1		not-accessible	An Entry consists in a bytes and a packets counters.
U32 acdPolicyStatsEntryID	1.3.6.1.4.1.22420.2.3.2.1.3	Unsigned32	read-only	This object identifies the order in the List.
acdPolicyStatsGroup	1.3.6.1.4.1.22420.2.3.6.2.2			Objects for the policy statistics Group.
U32 acdPolicyStatsID	1.3.6.1.4.1.22420.2.3.2.1.1	Unsigned32	not-accessible	Unique value for each policy counter. Its value ranges from 1 to MAXINT (4 bytes).
C64 acdPolicyStatsInHCOctets	1.3.6.1.4.1.22420.2.3.2.1.9	Counter64	read-only	The total number of Octets received on this MAC and matching this policy.
C64 acdPolicyStatsInHCPkts	1.3.6.1.4.1.22420.2.3.2.1.6	Counter64	read-only	The total number of packets received on this MAC and matching this policy.
C64 acdPolicyStatsInHCPktsErr	1.3.6.1.4.1.22420.2.3.2.1.12	Counter64	read-only	The total number of errored packets received on this MAC and matching this policy.
C32 acdPolicyStatsInOctets	1.3.6.1.4.1.22420.2.3.2.1.7	Counter32	read-only	The total number of Octets received on this MAC and matching this policy. This is a 32 bits counter. Combined with acdPolicyStatsInOverflowOctets, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCOctets.
C32 acdPolicyStatsInOverflowOctets	1.3.6.1.4.1.22420.2.3.2.1.8	Counter32	read-only	The number of times the associated acdPolicyStatsInOctets counter has overflowed. This is a 32 bits counter. Combined with acdPolicyStatsInOctets, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCOctets.
C32 acdPolicyStatsInOverflowPkts	1.3.6.1.4.1.22420.2.3.2.1.5	Counter32	read-only	The number of times the associated acdPolicyStatsInPkts counter has overflowed. This is a 32 bits counter. Combined with acdPolicyStatsInPkts, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCPkts.
C32 acdPolicyStatsInOverflowPktsErr	1.3.6.1.4.1.22420.2.3.2.1.11	Counter32	read-only	The number of times the associated acdPolicyStatsInPktsErr counter has overflowed. This is a 32 bits counter. Combined with acdPolicyStatsInPktsErr, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCPktsErr.
C32 acdPolicyStatsInPktsEx	1.3.6.1.4.1.22420.2.3.2.1.4	Counter32	read-only	The total number of packets received on this MAC and matching this policy. This is a 32 bits counter. Combined with acdPolicyStatsInOverflowPkts, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCPkts.
C32 acdPolicyStatsInPktsErr	1.3.6.1.4.1.22420.2.3.2.1.10	Counter32	read-only	The total number of errored packets received on this MAC and matching this policy. This is a 32 bits counter. Combined with acdPolicyStatsInOverflowPktsErr, it provides the equivalent of the 64 bits counter acdPolicyStatsInHCPktsErr.
U32 acdPolicyStatsListID	1.3.6.1.4.1.22420.2.3.2.1.2	Unsigned32	read-only	This object identifies in wich List the entry is.
acdPolicyStatsTable	1.3.6.1.4.1.22420.2.3.2		not-accessible	Table of all counters associated with each policy.
acdPolicyTable	1.3.6.1.4.1.22420.2.3.1		not-accessible	Table of all Policies
U32 acdPolicyTableLastChangeTid	1.3.6.1.4.1.22420.2.3.5.3.1	Unsigned32	read-only	This is the transaction ID of the last change of the acdPolicyTable table. If this value is different since the last read this is indicate a table change.
acdPolicyTableTid	1.3.6.1.4.1.22420.2.3.5.3
acdPolicyTidGroup	1.3.6.1.4.1.22420.2.3.6.2.7			List of scalars to monitior changes in tables.

RFC description

Manages policy database and configuration rules on Accedian Networks network performance monitoring devices.

Start monitoring Accedian MetroNID devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACD-POLICY-MIB