XYLAN-SOFT-PVC-MIB

All MIBs › XYLAN-SOFT-PVC-MIB

Category: Xylan OmniSwitch

Description: Manages Xylan OmniSwitch soft permanent virtual circuit setup, routing parameters, and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYLAN-SOFT-PVC-MIB?

XYLAN-SOFT-PVC-MIB is a Xylan (later Alcatel OmniSwitch) private MIB for managing ATM soft permanent virtual circuits (soft PVCs), covering call setup, routing, and failure conditions on OmniSwitch ATM switching modules. It exposes fault- and status-oriented data including counts of soft PVC call failures, currently failing soft PVCC/PVPC circuits with their slot/port/VPI/VCI identifiers, and configurable trap notification intervals. This is fundamentally a fault-monitoring MIB: it is used to detect software/network-level failures in ATM virtual circuit establishment rather than physical hardware sensors, and its trap objects (atmxSoftPvcCallFailuresTrapEnable) are designed to alert operators in near real time when soft PVCs fail to connect. It builds on the standard ATM Forum/IETF ATM MIB conventions for PVC addressing (VPI/VCI, slot/port indexing) though it is Xylan-specific in its object naming. It is deployed on Xylan/Alcatel OmniSwitch ATM switches in carrier or enterprise ATM backbone networks where soft PVC reliability is critical. Network engineers evaluating or troubleshooting this functionality can download the XYLAN-SOFT-PVC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYLAN-SOFT-PVC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xylan/Alcatel OmniSwitch ATM switch

Monitoring Examples

An administrator monitoring atmxSoftPvcCurrentlyFailingSoftPVccs and atmxSoftPvcCurrentlyFailingSoftPVpcs can see a rising count indicating circuits are failing to establish. Walking atmxCurrentlyFailingSoftPVccTable/atmxCurrentlyFailingSoftPVccEntry yields the exact atmxCurrentlyFailingSoftPVccSlotIndex, PortIndex, Vpi, and Vci of each failing circuit, letting an operator pinpoint which physical port and virtual circuit identifier is affected. Enabling atmxSoftPvcCallFailuresTrapEnable ensures the switch proactively notifies the NMS via atmxSoftPvcMIBTraps when new call failures occur, rather than requiring constant polling.

What Can Be Monitored

soft PVC call failure count
currently failing soft PVCC/PVPC circuits
failing circuit slot/port/VPI/VCI
call failure trap notification interval

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Gauge32

From XYLAN-BASE-MIB

xylanCsmArch

OBJECT-IDENTITY

From XYLAN-CSM-MIB

AtmxTrafficDescrParamIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
atmxCurrentlyFailingSoftPVccEntry	1.3.6.1.4.1.800.2.9.2.1.2.1		not-accessible	Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'.
INT atmxCurrentlyFailingSoftPVccLeafReference	1.3.6.1.4.1.800.2.9.2.1.2.1.5	INTEGER	not-accessible	The leaf reference
atmxCurrentlyFailingSoftPVccMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.5
INT atmxCurrentlyFailingSoftPVccPortIndex	1.3.6.1.4.1.800.2.9.2.1.2.1.2	INTEGER	not-accessible	The port instance
INT atmxCurrentlyFailingSoftPVccSlotIndex	1.3.6.1.4.1.800.2.9.2.1.2.1.1	INTEGER	not-accessible	The slot instance
atmxCurrentlyFailingSoftPVccTable	1.3.6.1.4.1.800.2.9.2.1.2		not-accessible	A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'.
STR atmxCurrentlyFailingSoftPVccTimeStamp	1.3.6.1.4.1.800.2.9.2.1.2.1.6	DisplayString	read-only	The time at which this Soft PVCC began to fail.
INT atmxCurrentlyFailingSoftPVccVci	1.3.6.1.4.1.800.2.9.2.1.2.1.4	INTEGER	not-accessible	The vci instance
INT atmxCurrentlyFailingSoftPVccVpi	1.3.6.1.4.1.800.2.9.2.1.2.1.3	INTEGER	not-accessible	The vpi instance
atmxCurrentlyFailingSoftPVpcEntry	1.3.6.1.4.1.800.2.9.2.1.3.1		not-accessible	Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'.
INT atmxCurrentlyFailingSoftPVpcLeafReference	1.3.6.1.4.1.800.2.9.2.1.3.1.4	INTEGER	not-accessible	The leaf reference
atmxCurrentlyFailingSoftPVpcMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.6
INT atmxCurrentlyFailingSoftPVpcPortIndex	1.3.6.1.4.1.800.2.9.2.1.3.1.2	INTEGER	not-accessible	The port instance
INT atmxCurrentlyFailingSoftPVpcSlotIndex	1.3.6.1.4.1.800.2.9.2.1.3.1.1	INTEGER	not-accessible	The slot instance
atmxCurrentlyFailingSoftPVpcTable	1.3.6.1.4.1.800.2.9.2.1.3		not-accessible	A table indicating all Soft Permanent Virtual Path Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'.
STR atmxCurrentlyFailingSoftPVpcTimeStamp	1.3.6.1.4.1.800.2.9.2.1.3.1.5	DisplayString	read-only	The time at which this Soft PVPC began to fail.
INT atmxCurrentlyFailingSoftPVpcVpi	1.3.6.1.4.1.800.2.9.2.1.3.1.3	INTEGER	not-accessible	The vpi instance
atmxSoftPvcAddressMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.4
atmxSoftPvcBaseGroup	1.3.6.1.4.1.800.2.9.2.1.1
atmxSoftPvcBaseMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.1
INT atmxSoftPvcBbcClass	1.3.6.1.4.1.800.2.9.2.1.6.1.2	INTEGER	read-write	Indicates the broadband bearer capability class.
atmxSoftPvcBbcEntry	1.3.6.1.4.1.800.2.9.2.1.6.1		not-accessible	An entry in this table is used to specify the bearer capa- bility of a given soft PVC.
ATM atmxSoftPvcBbcIndex	1.3.6.1.4.1.800.2.9.2.1.6.1.1	AtmxSoftPvcBbcIndex	not-accessible	Identifies an entry in the atmSoftPvcBbcTable.
INT atmxSoftPvcBbcRowStatus	1.3.6.1.4.1.800.2.9.2.1.6.1.7	INTEGER	read-write	This object is used to create, modify, and delete rows in the 'atmSoftPvcBbcTable'.
INT atmxSoftPvcBbcSusceptibilityToClipping	1.3.6.1.4.1.800.2.9.2.1.6.1.5	INTEGER	read-write	Indicates the broadband bearer capability susceptibility to clipping parameter.
atmxSoftPvcBbcTable	1.3.6.1.4.1.800.2.9.2.1.6		not-accessible	This table contains information related to ATM bearer capability type and associated parameters.
INT atmxSoftPvcBbcTimingRequirements	1.3.6.1.4.1.800.2.9.2.1.6.1.4	INTEGER	read-write	Indicates the broadband bearer capability timing requirements.
INT atmxSoftPvcBbcTrafficType	1.3.6.1.4.1.800.2.9.2.1.6.1.3	INTEGER	read-write	Indicates the broadband bearer capability traffic class.
INT atmxSoftPvcBbcUserPlaneConnectionConfig	1.3.6.1.4.1.800.2.9.2.1.6.1.6	INTEGER	read-write	Indicates the broadband bearer capability user plane configuration parmmeter.
CTR atmxSoftPvcCallFailures	1.3.6.1.4.1.800.2.9.2.1.1.2	Counter	read-only	The number of times a series of call attempts has failed to establish a Soft PVCC or Soft PVPC. The number of call attempts in a series is determined by atmSoftPVccRetryThreshold or atmSoftPVpcRetryThreshold, respectively.
NTF atmxSoftPvcCallFailuresTrap	1.3.6.1.4.1.800.2.9.2.2.1.1.0.1			A notification indicating that one or more series of call attempts in trying to establish a Soft PVPC or Soft PVCC have failed since the last atmSoftPvcCallFailureTrap was sent. If this trap has not been sent for the last atmSoftPvcNotificationInterval, then it will be sent on the next increment of atmSoftPvcCallFailures.
T/F atmxSoftPvcCallFailuresTrapEnable	1.3.6.1.4.1.800.2.9.2.1.1.1	TruthValue	read-write	Allows the generation of traps in response to call failures. By default, this object is set to 'false'.
G32 atmxSoftPvcCurrentlyFailingSoftPVccs	1.3.6.1.4.1.800.2.9.2.1.1.3	Gauge32	read-only	The current number of Soft PVCCs for which there is an active row in the atmSoftPVccTable having an atmSoftPVccOperStatus with a value other than 'connected'.
G32 atmxSoftPvcCurrentlyFailingSoftPVpcs	1.3.6.1.4.1.800.2.9.2.1.1.4	Gauge32	read-only	The current number of Soft PVPCs for which there is an active row in the atmSoftPVpcTable having an atmSoftPVpcOperStatus with a value other than 'connected'.
atmxSoftPvcMIB	1.3.6.1.4.1.800.2.9.2
atmxSoftPvcMIBCompliance	1.3.6.1.4.1.800.2.9.2.3.1.1
atmxSoftPvcMIBCompliances	1.3.6.1.4.1.800.2.9.2.3.1
atmxSoftPvcMIBConformance	1.3.6.1.4.1.800.2.9.2.3
atmxSoftPvcMIBGroups	1.3.6.1.4.1.800.2.9.2.3.2
atmxSoftPvcMIBObjects	1.3.6.1.4.1.800.2.9.2.1
atmxSoftPvcMIBTraps	1.3.6.1.4.1.800.2.9.2.2
INT atmxSoftPvcNotificationInterval	1.3.6.1.4.1.800.2.9.2.1.1.5	INTEGER	read-write	The minimum interval between the sending of atmSoftPvcCallFailuresTrap notifications.
atmxSoftPvcTraps	1.3.6.1.4.1.800.2.9.2.2.1
atmxSoftPvcTrapsPrefix	1.3.6.1.4.1.800.2.9.2.2.1.1
atmxSoftPvcVccMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.2
atmxSoftPvcVpcMIBGroup	1.3.6.1.4.1.800.2.9.2.3.2.3
INT xylnatmSoftPVccAdminStatus	1.3.6.1.4.1.800.2.9.2.1.5.1.26	INTEGER	read-write	The admin status of this VCL
INT xylnatmSoftPVccBbcIndex	1.3.6.1.4.1.800.2.9.2.1.5.1.28	INTEGER	read-write	The BBC Index from the BBC Table
INT xylnatmSoftPVccCrossConnectIdentifier	1.3.6.1.4.1.800.2.9.2.1.5.1.27	INTEGER	read-only	A non zero value if the VCL is cross-connected
xylnatmSoftPVccEntry	1.3.6.1.4.1.800.2.9.2.1.5.1		not-accessible	Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) originating at a switch interface. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVccRowStatus) can be set while the row is active. At the destination, the VCL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of Slot/Port, atmVclVpi, and atmVclVci specified in the index clause of this entry serves to identify the VCL on the source interface. The atmSoftPVccLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVCC.
ATM xylnatmSoftPVccHighTDIndex	1.3.6.1.4.1.800.2.9.2.1.5.1.20	AtmxTrafficDescrParamIndex	read-write	The high end TD
STR xylnatmSoftPVccLastChange	1.3.6.1.4.1.800.2.9.2.1.5.1.21	DisplayString	read-only	The value of MIB II sysUpTime at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value
INT xylnatmSoftPVccLastReleaseCause	1.3.6.1.4.1.800.2.9.2.1.5.1.10	INTEGER	read-only	Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.
OCT xylnatmSoftPVccLastReleaseDiagnostic	1.3.6.1.4.1.800.2.9.2.1.5.1.11	OCTET STRING	read-only	Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC.
INT xylnatmSoftPVccLeafReference	1.3.6.1.4.1.800.2.9.2.1.5.1.5	INTEGER	read-only	An arbitrary integer which, in the case of the source VCL having an atmVclCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVCC. If the atmVclCastType is not 'p2mpRoot' the value 1 shall be used.
ATM xylnatmSoftPVccLowTDIndex	1.3.6.1.4.1.800.2.9.2.1.5.1.19	AtmxTrafficDescrParamIndex	read-write	The low end TD...Refer 1695 for interpretation
INT xylnatmSoftPVccOperStatus	1.3.6.1.4.1.800.2.9.2.1.5.1.12	INTEGER	read-only	Describes the status of the Soft PVCC. When the row is not 'active', the value of this object is 'other'.
INT xylnatmSoftPVccOutPort	1.3.6.1.4.1.800.2.9.2.1.5.1.23	INTEGER	read-only	The outgoing port...
INT xylnatmSoftPVccOutSlot	1.3.6.1.4.1.800.2.9.2.1.5.1.22	INTEGER	read-only	The outgoing slot if the connection has been established..else 0
INT xylnatmSoftPVccOutVci	1.3.6.1.4.1.800.2.9.2.1.5.1.25	INTEGER	read-only	The outgoing vci..
INT xylnatmSoftPVccOutVpi	1.3.6.1.4.1.800.2.9.2.1.5.1.24	INTEGER	read-only	The outgoing vpi
INT xylnatmSoftPVccPortIndex	1.3.6.1.4.1.800.2.9.2.1.5.1.2	INTEGER	read-only	Port Instance
INT xylnatmSoftPVccRestart	1.3.6.1.4.1.800.2.9.2.1.5.1.13	INTEGER	read-write	When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVccRetryFailures object is cleared When the value is set to 'noop' no operation is performed. When read, the value 'noop' is returned.
G32 xylnatmSoftPVccRetryFailures	1.3.6.1.4.1.800.2.9.2.1.5.1.17	Gauge32	read-only	Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is restarted.
INT xylnatmSoftPVccRetryInterval	1.3.6.1.4.1.800.2.9.2.1.5.1.14	INTEGER	read-write	Defines the period to wait before attempting to establish the Soft PVC after the first failed call attempt. Zero represents an infinite interval indicating no retries.
INT xylnatmSoftPVccRetryLimit	1.3.6.1.4.1.800.2.9.2.1.5.1.18	INTEGER	read-write	Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVccRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful.
INT xylnatmSoftPVccRetryThreshold	1.3.6.1.4.1.800.2.9.2.1.5.1.16	INTEGER	read-write	Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVCC.
INT xylnatmSoftPVccRetryTimer	1.3.6.1.4.1.800.2.9.2.1.5.1.15	INTEGER	read-only	Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the timer is not running, the value zero shall be returned.
INT xylnatmSoftPVccRowStatus	1.3.6.1.4.1.800.2.9.2.1.5.1.29	INTEGER	read-write	Used to create and delete a Soft PVCC.
INT xylnatmSoftPVccSlotIndex	1.3.6.1.4.1.800.2.9.2.1.5.1.1	INTEGER	read-only	Slot Instance
xylnatmSoftPVccTable	1.3.6.1.4.1.800.2.9.2.1.5		not-accessible	The (conceptual) table used to manage Soft Permanent Virtual Channel Connections (Soft PVCCs). The Soft PVCC table is applicable only to switches.
STR xylnatmSoftPVccTargetAddress	1.3.6.1.4.1.800.2.9.2.1.5.1.6	DisplayString	read-write	The target ATM Address of this Soft PVCC.
INT xylnatmSoftPVccTargetSelectType	1.3.6.1.4.1.800.2.9.2.1.5.1.7	INTEGER	read-write	Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI values. In such a case, once the Soft PVCC atmSoftPVccOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI/VCI values will continue to be used even if the connection is subsequently torn down and re-established. The VPI/VCI values chosen will be available for reading in atmSoftPVccTargetVpi and atmSoftPVccTargetVci. If the value 'required' is specified, then values must be supplied for objects atmSoftPVccTargetVpi and atmSoftPVccTargetVci prior to activation of the row. These values are then to be used at the destination.
INT xylnatmSoftPVccTargetVci	1.3.6.1.4.1.800.2.9.2.1.5.1.9	INTEGER	read-write	The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.
INT xylnatmSoftPVccTargetVpi	1.3.6.1.4.1.800.2.9.2.1.5.1.8	INTEGER	read-write	The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.
INT xylnatmSoftPVccVci	1.3.6.1.4.1.800.2.9.2.1.5.1.4	INTEGER	read-only	Vcl instance
INT xylnatmSoftPVccVpi	1.3.6.1.4.1.800.2.9.2.1.5.1.3	INTEGER	read-only	Vpi instance
INT xylnatmSoftPVpcAdminStatus	1.3.6.1.4.1.800.2.9.2.1.4.1.23	INTEGER	read-write	The admin status of the VPL
INT xylnatmSoftPVpcBbcIndex	1.3.6.1.4.1.800.2.9.2.1.4.1.25	INTEGER	read-write	The BBC Index from the BBC Table
INT xylnatmSoftPVpcCrossConnectIdentifier	1.3.6.1.4.1.800.2.9.2.1.4.1.24	INTEGER	read-only	A unique non-zero value if the VPL is exiting the switch apart from the input
xylnatmSoftPVpcEntry	1.3.6.1.4.1.800.2.9.2.1.4.1		not-accessible	Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) originating at a switch interface. A Soft PVPC is a VPC that is: - provisioned at the originating (source) interface of the connection - established by signalling procedures across a network to a destination interface. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVpcRowStatus) can be set while the row is active. At the destination, the VPL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of slot/port, atmVplVpi specified in the index clause of this entry serves to identify the VPL on the source interface. The atmSoftPVpcLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVPC.
ATM xylnatmSoftPVpcHighTDIndex	1.3.6.1.4.1.800.2.9.2.1.4.1.18	AtmxTrafficDescrParamIndex	read-write	The high end of the TD
STR xylnatmSoftPVpcLastChange	1.3.6.1.4.1.800.2.9.2.1.4.1.19	DisplayString	read-only	The value of MIB II sysUptime object at the time this VPL entered its current op state.
INT xylnatmSoftPVpcLastReleaseCause	1.3.6.1.4.1.800.2.9.2.1.4.1.8	INTEGER	read-only	Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Release.
OCT xylnatmSoftPVpcLastReleaseDiagnostic	1.3.6.1.4.1.800.2.9.2.1.4.1.9	OCTET STRING	read-only	Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC.
INT xylnatmSoftPVpcLeafReference	1.3.6.1.4.1.800.2.9.2.1.4.1.4	INTEGER	read-only	The leaf reference for this Vpl
ATM xylnatmSoftPVpcLowTDIndex	1.3.6.1.4.1.800.2.9.2.1.4.1.17	AtmxTrafficDescrParamIndex	read-write	The low end Traffic Descriptor ..refer rfc1695 for details
INT xylnatmSoftPVpcOperStatus	1.3.6.1.4.1.800.2.9.2.1.4.1.10	INTEGER	read-only	Describes the status of the Soft PVPC. When the row is not 'active', the value of this object is 'other'.
INT xylnatmSoftPVpcOutPort	1.3.6.1.4.1.800.2.9.2.1.4.1.21	INTEGER	read-only	The out going slot if the connection is established..else its 0
INT xylnatmSoftPVpcOutSlot	1.3.6.1.4.1.800.2.9.2.1.4.1.20	INTEGER	read-only	The outgoing slot once the connection is established..else its 0
INT xylnatmSoftPVpcOutVpi	1.3.6.1.4.1.800.2.9.2.1.4.1.22	INTEGER	read-only	The outgoing vpi if established..else 0
INT xylnatmSoftPVpcPortIndex	1.3.6.1.4.1.800.2.9.2.1.4.1.2	INTEGER	read-only	The port number
INT xylnatmSoftPVpcRestart	1.3.6.1.4.1.800.2.9.2.1.4.1.11	INTEGER	read-write	When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVpcRetryFailures object is cleared. When the value is set to 'noop', no operation is performed. When read, the value 'noop' is returned.
G32 xylnatmSoftPVpcRetryFailures	1.3.6.1.4.1.800.2.9.2.1.4.1.15	Gauge32	read-only	Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is restarted.
INT xylnatmSoftPVpcRetryInterval	1.3.6.1.4.1.800.2.9.2.1.4.1.12	INTEGER	read-write	Defines the period to wait before attempting to establish the Soft PVPC connection after the first failed call attempt. Zero represents an infinite interval indicating no retries.
INT xylnatmSoftPVpcRetryLimit	1.3.6.1.4.1.800.2.9.2.1.4.1.16	INTEGER	read-write	Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVpcRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful.
INT xylnatmSoftPVpcRetryThreshold	1.3.6.1.4.1.800.2.9.2.1.4.1.14	INTEGER	read-write	Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVPC.
INT xylnatmSoftPVpcRetryTimer	1.3.6.1.4.1.800.2.9.2.1.4.1.13	INTEGER	read-only	Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, the value zero shall be returned.
INT xylnatmSoftPVpcRowStatus	1.3.6.1.4.1.800.2.9.2.1.4.1.26	INTEGER	read-write	Used to create and delete a Soft PVPC.
INT xylnatmSoftPVpcSlotIndex	1.3.6.1.4.1.800.2.9.2.1.4.1.1	INTEGER	read-only	The slot index for this vpc
xylnatmSoftPVpcTable	1.3.6.1.4.1.800.2.9.2.1.4		not-accessible	The (conceptual) table used to manage Soft Permanent Virtual Path Connections (Soft PVPCs) The Soft PVPC table is applicable only to switches.
STR xylnatmSoftPVpcTargetAddress	1.3.6.1.4.1.800.2.9.2.1.4.1.5	DisplayString	read-write	The target ATM Address of this Soft PVPC.
INT xylnatmSoftPVpcTargetSelectType	1.3.6.1.4.1.800.2.9.2.1.4.1.6	INTEGER	read-write	Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In such a case, once the Soft PVPC atmSoftPVpcOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI value will continue to be used even if the connection is subsequently torn down and re-established. The VPI value chosen will be available for reading in atmSoftPVpcTargetVpi. If the value 'required' is specified, then a value must be supplied for object atmSoftPVpcTargetVpi prior to activation of the row. This value is then to be used at the destination.
INT xylnatmSoftPVpcTargetVpi	1.3.6.1.4.1.800.2.9.2.1.4.1.7	INTEGER	read-write	The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is not relevant when the value of atmSoftPVpcTargetSelectType is 'any'.
INT xylnatmSoftPVpcVpi	1.3.6.1.4.1.800.2.9.2.1.4.1.3	INTEGER	read-only	The VPI value of the VPL used at the in interface.

RFC description

ATM Soft PVC management for Xylan Omnicell platform monitoring call failures and connection establishment attempts.

Start monitoring Xylan/Alcatel OmniSwitch ATM switch (soft-PVC call-failure/trap-notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYLAN-SOFT-PVC-MIB

What Is XYLAN-SOFT-PVC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description