All MIBs › XYLAN-SOFT-PVC-MIB › xylnatmSoftPVccTargetSelectType
xylnatmSoftPVccTargetSelectType
Module: XYLAN-SOFT-PVC-MIB
OID (symbolic): XYLAN-SOFT-PVC-MIB::xylnatmSoftPVccTargetSelectType
OID (numeric): 1.3.6.1.4.1.800.2.9.2.1.5.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the target VPI/VCI values are to be used at the destination.
If the value 'any' is specified, the destination switch will choose the VPI/VCI values. In such a case, once the Soft PVCC atmSoftPVccOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI/VCI values will continue to be used even if the connection is subsequently torn down and re-established. The VPI/VCI values chosen will be available for reading in atmSoftPVccTargetVpi and atmSoftPVccTargetVci.
If the value 'required' is specified, then values must be supplied for objects atmSoftPVccTargetVpi and atmSoftPVccTargetVci prior to activation of the row. These values are then to be used at the destination.
What is xylnatmSoftPVccTargetSelectType?
Read-write choice of whether the destination VPI/VCI pair is fixed (required, the default) or chosen by the far-end switch (any); once a connection made with 'any' becomes connected, this object flips to 'required' and the negotiated VPI/VCI become readable in the TargetVpi/TargetVci objects. An admin uses 'required' when the destination VPI/VCI must match specific pre-provisioned values, and 'any' when the far end can pick freely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.9.2.1.5.1.7 snmpwalk -v2c -c public <target> XYLAN-SOFT-PVC-MIB::xylnatmSoftPVccTargetSelectType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.9.2.1.5.1.7.1 snmpget -v2c -c public <target> XYLAN-SOFT-PVC-MIB::xylnatmSoftPVccTargetSelectType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.9.2.1.5.1.7.1 i <value>
Start monitoring Xylan/Alcatel OmniSwitch ATM switch (soft-PVC call-failure/trap-notification status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-SOFT-PVC-MIB::xylnatmSoftPVccTargetSelectType OID value, configure state conditions and alerts, and monitor any Xylan/Alcatel OmniSwitch ATM switch (soft-PVC call-failure/trap-notification status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.9 | xylanCsmArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.9.2 | atmxSoftPvcMIB | XYLAN-SOFT-PVC-MIB |
| 1.3.6.1.4.1.800.2.9.2.1 | atmxSoftPvcMIBObjects | XYLAN-SOFT-PVC-MIB |
| 1.3.6.1.4.1.800.2.9.2.1.5 | xylnatmSoftPVccTable | XYLAN-SOFT-PVC-MIB |
| 1.3.6.1.4.1.800.2.9.2.1.5.1 | xylnatmSoftPVccEntry | XYLAN-SOFT-PVC-MIB |
| 1.3.6.1.4.1.800.2.9.2.1.5.1.7 | xylnatmSoftPVccTargetSelectType | XYLAN-SOFT-PVC-MIB |