WebGraph-Thermo-Hygro-Barometer-US-MIB

All MIBs › WebGraph-Thermo-Hygro-Barometer-US-MIB

Category: Power and Environmental Monitoring

Description: Monitors WebGraph combined temperature, humidity, and barometric pressure sensor readings and configurable alarms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WebGraph-Thermo-Hygro-Barometer-US-MIB?

WebGraph-Thermo-Hygro-Barometer-US-MIB is a vendor MIB for WebGraph's combined environmental sensor devices that measure temperature, humidity, and barometric pressure, typically deployed as networked SNMP-capable sensor units. It exposes sensor inventory tables alongside per-sensor value tables for temperature (and, per its naming convention, likely humidity/pressure) readings, plus binary threshold/alarm state tables. It is used exclusively for environmental/hardware condition monitoring, tracking real-time temperature readings and their derived alarm states to detect conditions like an overheating server room or equipment closet before physical damage or downtime occurs. As a small, self-contained sensor MIB it has no apparent dependency on other MIBs. It is typically deployed in data centers, telecom closets, or equipment rooms where WebGraph environmental sensors feed temperature/humidity/pressure alarms into a monitoring system. Engineers can download the WebGraph-Thermo-Hygro-Barometer-US-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WebGraph-Thermo-Hygro-Barometer-US-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WebGraph environmental monitoring sensor (temperature/humidity/barometric pressure)

Monitoring Examples

wtWebGraphThermoBaroSensorTable/Entry enumerates installed sensors by wtWebGraphThermoBaroSensorNo, while wtWebGraphThermoBaroTempValueTable/Entry exposes the live wtWebGraphThermoBaroTempValue reading for each sensor. wtWebGraphThermoBaroBinaryTempValueTable/Entry exposes a binary alarm state that flips when the temperature crosses a configured threshold, for example flagging a server room that has exceeded its safe operating temperature.

What Can Be Monitored

temperature reading
binary temperature alarm state
sensor identification number
packetized/logged temperature values

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
wut	1.3.6.1.4.1.5040
wtComServer	1.3.6.1.4.1.5040.1
wtWebio	1.3.6.1.4.1.5040.1.2
wtWebGraphThermoBaro	1.3.6.1.4.1.5040.1.2.37
NTF wtWebGraphThermoBaroAlert1	1.3.6.1.4.1.5040.1.2.37.0.31			This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert2	1.3.6.1.4.1.5040.1.2.37.0.32			This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert3	1.3.6.1.4.1.5040.1.2.37.0.33			This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert4	1.3.6.1.4.1.5040.1.2.37.0.34			This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert5	1.3.6.1.4.1.5040.1.2.37.0.35			This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert6	1.3.6.1.4.1.5040.1.2.37.0.36			This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert7	1.3.6.1.4.1.5040.1.2.37.0.37			This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert8	1.3.6.1.4.1.5040.1.2.37.0.38			This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert9	1.3.6.1.4.1.5040.1.2.37.0.91			This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert10	1.3.6.1.4.1.5040.1.2.37.0.92			This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert11	1.3.6.1.4.1.5040.1.2.37.0.93			This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert12	1.3.6.1.4.1.5040.1.2.37.0.94			This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert13	1.3.6.1.4.1.5040.1.2.37.0.95			This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert14	1.3.6.1.4.1.5040.1.2.37.0.96			This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert15	1.3.6.1.4.1.5040.1.2.37.0.97			This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlert16	1.3.6.1.4.1.5040.1.2.37.0.98			This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphThermoBaroAlertDiag	1.3.6.1.4.1.5040.1.2.37.0.110			This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
wtWebGraphThermoBaroTemp	1.3.6.1.4.1.5040.1.2.37.1
INT wtWebGraphThermoBaroSensors	1.3.6.1.4.1.5040.1.2.37.1.1	INTEGER	read-only	Number of sensors
wtWebGraphThermoBaroSensorTable	1.3.6.1.4.1.5040.1.2.37.1.2		not-accessible	List of sensors.
wtWebGraphThermoBaroSensorEntry	1.3.6.1.4.1.5040.1.2.37.1.2.1		not-accessible	List of sensor numbers.
INT wtWebGraphThermoBaroSensorNo	1.3.6.1.4.1.5040.1.2.37.1.2.1.1	INTEGER	read-only	Sensor number.
wtWebGraphThermoBaroTempValueTable	1.3.6.1.4.1.5040.1.2.37.1.3		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphThermoBaroTempValueEntry	1.3.6.1.4.1.5040.1.2.37.1.3.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphThermoBaroTempValue	1.3.6.1.4.1.5040.1.2.37.1.3.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 5 characters in length.
wtWebGraphThermoBaroBinaryTempValueTable	1.3.6.1.4.1.5040.1.2.37.1.4		not-accessible	List of binary measurement values corresponding to the channel numbers.
wtWebGraphThermoBaroBinaryTempValueEntry	1.3.6.1.4.1.5040.1.2.37.1.4.1		not-accessible	Binary measurement values of the sensors.
INT wtWebGraphThermoBaroBinaryTempValue	1.3.6.1.4.1.5040.1.2.37.1.4.1.1	INTEGER	read-only	Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
wtWebGraphThermoBaroTempValuePktTable	1.3.6.1.4.1.5040.1.2.37.1.8		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphThermoBaroTempValuePktEntry	1.3.6.1.4.1.5040.1.2.37.1.8.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphThermoBaroTempValuePkt	1.3.6.1.4.1.5040.1.2.37.1.8.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point.
wtWebGraphThermoBaroSessCntrl	1.3.6.1.4.1.5040.1.2.37.2
OCT wtWebGraphThermoBaroSessCntrlPassword	1.3.6.1.4.1.5040.1.2.37.2.1	OCTET STRING	read-write	Entering this password opens a session which is ended by writing a 1 to wtWebGraphThermoBaroSessCntrlLogout. When read this variable provides a string of length zero.
INT wtWebGraphThermoBaroSessCntrlConfigMode	1.3.6.1.4.1.5040.1.2.37.2.2	INTEGER	read-only	When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
INT wtWebGraphThermoBaroSessCntrlLogout	1.3.6.1.4.1.5040.1.2.37.2.3	INTEGER	read-write	If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
OCT wtWebGraphThermoBaroSessCntrlAdminPassword	1.3.6.1.4.1.5040.1.2.37.2.4	OCTET STRING	read-write	This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
OCT wtWebGraphThermoBaroSessCntrlConfigPassword	1.3.6.1.4.1.5040.1.2.37.2.5	OCTET STRING	read-write	This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
wtWebGraphThermoBaroConfig	1.3.6.1.4.1.5040.1.2.37.3
wtWebGraphThermoBaroDevice	1.3.6.1.4.1.5040.1.2.37.3.1
wtWebGraphThermoBaroText	1.3.6.1.4.1.5040.1.2.37.3.1.1
OCT wtWebGraphThermoBaroDeviceName	1.3.6.1.4.1.5040.1.2.37.3.1.1.1	OCTET STRING	read-write	Name of the Webio, which is user definable.
OCT wtWebGraphThermoBaroDeviceText	1.3.6.1.4.1.5040.1.2.37.3.1.1.2	OCTET STRING	read-write	Description of the Webio, which is user definable.
OCT wtWebGraphThermoBaroDeviceLocation	1.3.6.1.4.1.5040.1.2.37.3.1.1.3	OCTET STRING	read-write	Description of the location of the Webio, which is user definable.
OCT wtWebGraphThermoBaroDeviceContact	1.3.6.1.4.1.5040.1.2.37.3.1.1.4	OCTET STRING	read-write	Contact address of the system operator of the Webio, which is user definable.
wtWebGraphThermoBaroTimeDate	1.3.6.1.4.1.5040.1.2.37.3.1.2
wtWebGraphThermoBaroTimeZone	1.3.6.1.4.1.5040.1.2.37.3.1.2.1
INT wtWebGraphThermoBaroTzOffsetHrs	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.1	INTEGER	read-write	Offset hours for the time zone (winter time) with respect to UTC.
INT wtWebGraphThermoBaroTzOffsetMin	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.2	INTEGER	read-write	Offset minutes for the time zone (winter time) with respect to UTC.
OCT wtWebGraphThermoBaroTzEnable	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
INT wtWebGraphThermoBaroStTzOffsetHrs	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.4	INTEGER	read-write	Offset hours of the time zone (summer time) with respect to UTC.
INT wtWebGraphThermoBaroStTzOffsetMin	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.5	INTEGER	read-write	Offset minutes of the time zone (summer time) with respect to UTC.
OCT wtWebGraphThermoBaroStTzEnable	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.6	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
INT wtWebGraphThermoBaroStTzStartMonth	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.7	INTEGER	read-write	Month in which the change is made from winter time to summer time.
INT wtWebGraphThermoBaroStTzStartMode	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.8	INTEGER	read-write	Mode of the day of the week for which the change is made from winter time to summer time.
INT wtWebGraphThermoBaroStTzStartWday	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.9	INTEGER	read-write	Day of the week on which the change is made from winter time to summer time
INT wtWebGraphThermoBaroStTzStartHrs	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.10	INTEGER	read-write	Hour in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphThermoBaroStTzStartMin	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.11	INTEGER	read-write	Minute in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphThermoBaroStTzStopMonth	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.12	INTEGER	read-write	Month in which the change is made from summer time to winter time.
INT wtWebGraphThermoBaroStTzStopMode	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.13	INTEGER	read-write	Mode of the week day on which the change is made from summer time to winter time.
INT wtWebGraphThermoBaroStTzStopWday	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.14	INTEGER	read-write	Day of the week on which the change is made from summer time to winter time.
INT wtWebGraphThermoBaroStTzStopHrs	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.15	INTEGER	read-write	Hour at which the time zone is changed from summer to winter time with respect to UTC.
INT wtWebGraphThermoBaroStTzStopMin	1.3.6.1.4.1.5040.1.2.37.3.1.2.1.16	INTEGER	read-write	Minute at which the time zone is changed from summer to winter time with respect to UTC.
wtWebGraphThermoBaroTimeServer	1.3.6.1.4.1.5040.1.2.37.3.1.2.2
OCT wtWebGraphThermoBaroTimeServer1	1.3.6.1.4.1.5040.1.2.37.3.1.2.2.1	OCTET STRING	read-write	IP address or name of the 1st time server in ASCII
OCT wtWebGraphThermoBaroTimeServer2	1.3.6.1.4.1.5040.1.2.37.3.1.2.2.2	OCTET STRING	read-write	IP address or name of the 2nd time server in ASCII
OCT wtWebGraphThermoBaroTsEnable	1.3.6.1.4.1.5040.1.2.37.3.1.2.2.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
INT wtWebGraphThermoBaroTsSyncTime	1.3.6.1.4.1.5040.1.2.37.3.1.2.2.4	INTEGER	read-write	Daily synchronisation time with the time server (hour: 0-23).
wtWebGraphThermoBaroDeviceClock	1.3.6.1.4.1.5040.1.2.37.3.1.2.3
INT wtWebGraphThermoBaroClockHrs	1.3.6.1.4.1.5040.1.2.37.3.1.2.3.1	INTEGER	read-write	Clock hours taking into account the time zone settings.
INT wtWebGraphThermoBaroClockMin	1.3.6.1.4.1.5040.1.2.37.3.1.2.3.2	INTEGER	read-write	Clock minutes taking into account the time zone settings.
INT wtWebGraphThermoBaroClockDay	1.3.6.1.4.1.5040.1.2.37.3.1.2.3.3	INTEGER	read-write	Date: Day of the month, taking into account the time zone settings.
INT wtWebGraphThermoBaroClockMonth	1.3.6.1.4.1.5040.1.2.37.3.1.2.3.4	INTEGER	read-write	Date: Month, taking into account the time zone settings.
INT wtWebGraphThermoBaroClockYear	1.3.6.1.4.1.5040.1.2.37.3.1.2.3.5	INTEGER	read-write	Date: Year, taking into account the time zone settings.
wtWebGraphThermoBaroBasic	1.3.6.1.4.1.5040.1.2.37.3.1.3
wtWebGraphThermoBaroNetwork	1.3.6.1.4.1.5040.1.2.37.3.1.3.1
IP wtWebGraphThermoBaroIpAddress	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.1	IpAddress	read-write	IP address of the Webio
IP wtWebGraphThermoBaroSubnetMask	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.2	IpAddress	read-write	Subnet mask of the Webio
IP wtWebGraphThermoBaroGateway	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.3	IpAddress	read-write	Gateway of the Webio
OCT wtWebGraphThermoBaroDnsServer1	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.4	OCTET STRING	read-write	IP address of the 1st DNS server in ASCII
OCT wtWebGraphThermoBaroDnsServer2	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.5	OCTET STRING	read-write	IP address of the 2nd DNS server in ASCII
OCT wtWebGraphThermoBaroAddConfig	1.3.6.1.4.1.5040.1.2.37.3.1.3.1.6	OCTET STRING	read-write	Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
wtWebGraphThermoBaroHTTP	1.3.6.1.4.1.5040.1.2.37.3.1.3.2
OCT wtWebGraphThermoBaroStartup	1.3.6.1.4.1.5040.1.2.37.3.1.3.2.1	OCTET STRING	read-write	Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
OCT wtWebGraphThermoBaroGetHeaderEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.2.2	OCTET STRING	read-write	If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
INT wtWebGraphThermoBaroHttpPort	1.3.6.1.4.1.5040.1.2.37.3.1.3.2.3	INTEGER	read-write	Definition of the standard HTML port (Default: 80).
wtWebGraphThermoBaroMail	1.3.6.1.4.1.5040.1.2.37.3.1.3.3
OCT wtWebGraphThermoBaroMailAdName	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.1	OCTET STRING	read-write	Device name for mail administration.
OCT wtWebGraphThermoBaroMailReply	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.2	OCTET STRING	read-write	Reply address for the mail server.
OCT wtWebGraphThermoBaroMailServer	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.3	OCTET STRING	read-write	Name or IP address of the mail server.
OCT wtWebioAn1MailEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.4	OCTET STRING	read-write	Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
OCT wtWebGraphThermoBaroMailAuthentication	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.5	OCTET STRING	read-write	Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
OCT wtWebGraphThermoBaroMailAuthUser	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.6	OCTET STRING	read-write	Name of the user to be authenticated.
OCT wtWebGraphThermoBaroMailAuthPassword	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.7	OCTET STRING	read-write	Authentication password.
OCT wtWebGraphThermoBaroMailPop3Server	1.3.6.1.4.1.5040.1.2.37.3.1.3.3.8	OCTET STRING	read-write	Name or Ip-address of the POP3 Servers.
wtWebGraphThermoBaroSNMP	1.3.6.1.4.1.5040.1.2.37.3.1.3.4
OCT wtWebGraphThermoBaroSnmpCommunityStringRead	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.1	OCTET STRING	read-write	Community string read only
OCT wtWebGraphThermoBaroSnmpCommunityStringReadWrite	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.2	OCTET STRING	read-write	Community string read / write
OCT wtWebGraphThermoBaroSystemTrapManagerIP	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.3	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the system trap.
OCT wtWebGraphThermoBaroSystemTrapEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.4	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
OCT wtWebGraphThermoBaroSnmpEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.5	OCTET STRING	read-write	Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
OCT wtWebGraphThermoBaroSnmpCommunityStringTrap	1.3.6.1.4.1.5040.1.2.37.3.1.3.4.6	OCTET STRING	read-write	Community string send within traps.
wtWebGraphThermoBaroUDP	1.3.6.1.4.1.5040.1.2.37.3.1.3.5
INT wtWebGraphThermoBaroUdpPort	1.3.6.1.4.1.5040.1.2.37.3.1.3.5.1	INTEGER	read-write	Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
OCT wtWebGraphThermoBaroUdpEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.5.2	OCTET STRING	read-write	Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
wtWebGraphThermoBaroSyslog	1.3.6.1.4.1.5040.1.2.37.3.1.3.6
OCT wtWebGraphThermoBaroSyslogServerIP	1.3.6.1.4.1.5040.1.2.37.3.1.3.6.1	OCTET STRING	read-write	Name or IP address of the Syslog server, which accepts the Syslog messgaes.
INT wtWebGraphThermoBaroSyslogServerPort	1.3.6.1.4.1.5040.1.2.37.3.1.3.6.2	INTEGER	read-write	Portnumber of the Syslog servers, default 514.
OCT wtWebGraphThermoBaroSyslogSystemMessagesEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.6.3	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
OCT wtWebGraphThermoBaroSyslogEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.6.4	OCTET STRING	read-write	Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
wtWebGraphThermoBaroFTP	1.3.6.1.4.1.5040.1.2.37.3.1.3.7
OCT wtWebGraphThermoBaroFTPServerIP	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.1	OCTET STRING	read-write	Name or IP address of the FTP server, which accepts the FTP messages.
INT wtWebGraphThermoBaroFTPServerControlPort	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.2	INTEGER	read-write	Portnumber of the control port of the FTP server, default 21.
OCT wtWebGraphThermoBaroFTPUserName	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.3	OCTET STRING	read-write	FTP Loggin: user name.
OCT wtWebGraphThermoBaroFTPPassword	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.4	OCTET STRING	read-write	FTP Loggin: user password.
OCT wtWebGraphThermoBaroFTPAccount	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.5	OCTET STRING	read-write	FTP Loggin: name of account.
OCT wtWebGraphThermoBaroFTPOption	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.6	OCTET STRING	read-write	Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
OCT wtWebGraphThermoBaroFTPEnable	1.3.6.1.4.1.5040.1.2.37.3.1.3.7.7	OCTET STRING	read-write	Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
wtWebGraphThermoBaroRSS	1.3.6.1.4.1.5040.1.2.37.3.1.3.8
OCT wtWebGraphThermoBaroRSSChannelTitle	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.1	OCTET STRING	read-write	Name of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelLink	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.2	OCTET STRING	read-write	Link of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelDescription	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.3	OCTET STRING	read-write	Description of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelImage	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.4	OCTET STRING	read-write	Link of a picture, which will be shown at the headline of the output window.
OCT wtWebGraphThermoBaroRSSChannelImageTitle	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.5	OCTET STRING	read-write	Alias Name of the picture.
OCT wtWebGraphThermoBaroRSSChannelImageLink	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.6	OCTET STRING	read-write	Link, which can be selected by clicking on the picture.
OCT wtWebGraphThermoBaroRSSChannelItemTitle	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.7	OCTET STRING	read-write	Title of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelItemLink	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.8	OCTET STRING	read-write	Link of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelItemDescription	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.9	OCTET STRING	read-write	Text of the RSS Feed.
OCT wtWebGraphThermoBaroRSSChannelItemQuantity	1.3.6.1.4.1.5040.1.2.37.3.1.3.8.10	OCTET STRING	read-write	Number of lines.
wtWebGraphThermoBaroLanguage	1.3.6.1.4.1.5040.1.2.37.3.1.3.9
OCT wtWebGraphThermoBaroLanguageSelect	1.3.6.1.4.1.5040.1.2.37.3.1.3.9.1	OCTET STRING	read-write	Sprachauswahl: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : englisch Bit 0 : german
wtWebGraphThermoBaroDatalogger	1.3.6.1.4.1.5040.1.2.37.3.1.4
INT wtWebGraphThermoBaroLoggerTimebase	1.3.6.1.4.1.5040.1.2.37.3.1.4.1	INTEGER	read-write	Time base of the data logger
OCT wtWebGraphThermoBaroLoggerSensorSel	1.3.6.1.4.1.5040.1.2.37.3.1.4.2	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
wtWebGraphThermoBaroAlarm	1.3.6.1.4.1.5040.1.2.37.3.1.5
INT wtWebGraphThermoBaroAlarmCount	1.3.6.1.4.1.5040.1.2.37.3.1.5.1	INTEGER	read-only	Number of independent alarms.
wtWebGraphThermoBaroAlarmIfTable	1.3.6.1.4.1.5040.1.2.37.3.1.5.2		not-accessible	List of alarm indices.
wtWebGraphThermoBaroAlarmIfEntry	1.3.6.1.4.1.5040.1.2.37.3.1.5.2.1		not-accessible	Numbers of the alarms.
INT wtWebGraphThermoBaroAlarmNo	1.3.6.1.4.1.5040.1.2.37.3.1.5.2.1.1	INTEGER	read-only	Alarm number.
wtWebGraphThermoBaroAlarmTable	1.3.6.1.4.1.5040.1.2.37.3.1.5.3		not-accessible	List of settings depending on the alarm number.
wtWebGraphThermoBaroAlarmEntry	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1		not-accessible	Alarm parameters of the individual alarms.
OCT wtWebGraphThermoBaroAlarmTrigger	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.1	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphThermoBaroAlarmMin	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.2	OCTET STRING	read-write	Minimum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmMax	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.3	OCTET STRING	read-write	Maximum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmHysteresis	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.4	OCTET STRING	read-write	Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmDelay	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.5	OCTET STRING	read-write	Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
OCT wtWebGraphThermoBaroAlarmInterval	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.6	OCTET STRING	read-write	Send interval for alarm messages.
OCT wtWebGraphThermoBaroAlarmEnable	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.7	OCTET STRING	read-write	Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP enable
OCT wtWebGraphThermoBaroAlarmEMailAddr	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.8	OCTET STRING	read-write	E-Mail address for sending the alarm mail to.
OCT wtWebGraphThermoBaroAlarmMailSubject	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.9	OCTET STRING	read-write	Subject line for alarm mail.
OCT wtWebGraphThermoBaroAlarmMailText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.10	OCTET STRING	read-write	Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphThermoBaroAlarmManagerIP	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.11	OCTET STRING	read-write	Name or IP address of the SNMP Manager which accepts the trap.
OCT wtWebGraphThermoBaroAlarmTrapText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.12	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphThermoBaroAlarmMailOptions	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.13	OCTET STRING	read-write	Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
OCT wtWebGraphThermoBaroAlarmTcpIpAddr	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.14	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the trap.
INT wtWebGraphThermoBaroAlarmTcpPort	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.15	INTEGER	read-write	Port number of the TCP server which accepts the trap.
OCT wtWebGraphThermoBaroAlarmTcpText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.16	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphThermoBaroAlarmClearMailSubject	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.17	OCTET STRING	read-write	Subject line for alarm clear mail.
OCT wtWebGraphThermoBaroAlarmClearMailText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.18	OCTET STRING	read-write	Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphThermoBaroAlarmClearTrapText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.19	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphThermoBaroAlarmClearTcpText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.20	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphThermoBaroAlarmDeltaTemp	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.21	OCTET STRING	read-write	Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.
OCT wtWebGraphThermoBaroAlarmRHMin	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.22	OCTET STRING	read-write	Minimum rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmRHMax	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.23	OCTET STRING	read-write	Maximum rel.Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmRHHysteresis	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.24	OCTET STRING	read-write	Hysterese rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmAHMin	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.25	OCTET STRING	read-write	Minimum abs. Humidity in g/(mmm) with maximum 2 decimal places.
OCT wtWebGraphThermoBaroAlarmAHMax	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.26	OCTET STRING	read-write	Maximum abs. Humidity in g/(mmm) with maximum 2 decimal places.
IP wtWebGraphThermoBaroAlarmSyslogIpAddr	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.27	IpAddress	read-write	IP address of the syslog server to which the Webio device should send syslog messages.
INT wtWebGraphThermoBaroAlarmSyslogPort	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.28	INTEGER	read-write	Port number of the syslog server to which the Webio device should send syslog messages.
OCT wtWebGraphThermoBaroAlarmSyslogText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.29	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphThermoBaroAlarmSyslogClearText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.30	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphThermoBaroAlarmFtpDataPort	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.31	OCTET STRING	read-write	Local data port: 1..65535 or AUTO: the next free port will be assigned.
OCT wtWebGraphThermoBaroAlarmFtpFileName	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.32	OCTET STRING	read-write	Name of the file including path informations.
OCT wtWebGraphThermoBaroAlarmFtpText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.33	OCTET STRING	read-write	Message text to store on the FTP server.
OCT wtWebGraphThermoBaroAlarmFtpClearText	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.34	OCTET STRING	read-write	Alarm clear message to store on the FTP server.
OCT wtWebGraphThermoBaroAlarmFtpOption	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.35	OCTET STRING	read-write	Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
OCT wtWebGraphThermoBaroAlarmTimerCron	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.36	OCTET STRING	read-write	This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
OCT wtWebGraphThermoBaroAlarmName	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.39	OCTET STRING	read-write	Alert name
OCT wtWebGraphThermoBaroAlarmActive	1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.40	OCTET STRING	read-write	Alert active 1 = ON 0 = OFF
wtWebGraphThermoBaroGraphics	1.3.6.1.4.1.5040.1.2.37.3.1.6
wtWebGraphThermoBaroGraphicsBase	1.3.6.1.4.1.5040.1.2.37.3.1.6.1
OCT wtWebGraphThermoBaroGraphicsBaseEnable	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.1	OCTET STRING	read-write	Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
INT wtWebGraphThermoBaroGraphicsBaseWidth	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.2	INTEGER	read-write	Defines the width of the graphic in pixels.
INT wtWebGraphThermoBaroGraphicsBaseHeight	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.3	INTEGER	read-write	Defines the height of the graphic in pixels.
OCT wtWebGraphThermoBaroGraphicsBaseFrameColor	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.4	OCTET STRING	read-write	Frame color definition in RGB.
OCT wtWebGraphThermoBaroGraphicsBaseBackgroundColor	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.5	OCTET STRING	read-write	Background color definition in RGB.
INT wtWebGraphThermoBaroGraphicsBasePollingrate	1.3.6.1.4.1.5040.1.2.37.3.1.6.1.6	INTEGER	read-write	Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
wtWebGraphThermoBaroGraphicsSelect	1.3.6.1.4.1.5040.1.2.37.3.1.6.2
OCT wtWebGraphThermoBaroGraphicsSelectDisplaySensorSel	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.1	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3-7: unused
OCT wtWebGraphThermoBaroGraphicsSelectDisplayShowExtrem	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.2	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3-7: unused
wtWebGraphThermoBaroSensorColorTable	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphThermoBaroSensorColorEntry	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1		not-accessible	Numbers of the sensors.
OCT wtWebGraphThermoBaroGraphicsSensorColor	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphThermoBaroGraphicsSelectScale	1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1.2	OCTET STRING	read-write	Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3-7: unused
wtWebGraphThermoBaroGraphicsScale	1.3.6.1.4.1.5040.1.2.37.3.1.6.3
OCT wtWebGraphThermoBaroGraphicsScaleAutoScaleEnable	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.1	OCTET STRING	read-write	Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3-7: unused
OCT wtWebGraphThermoBaroGraphicsScaleAutoFitEnable	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.2	OCTET STRING	read-write	Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3-7: unused
INT wtWebGraphThermoBaroGraphicsScale1Min	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.3	INTEGER	read-only	Scale 1: Minimum.
INT wtWebGraphThermoBaroGraphicsScale2Min	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.4	INTEGER	read-only	Scale 2: Minimum.
INT wtWebGraphThermoBaroGraphicsScale3Min	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.5	INTEGER	read-only	Scale 3: Minimum.
INT wtWebGraphThermoBaroGraphicsScale4Min	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.6	INTEGER	read-only	Scale 4: Minimum.
INT wtWebGraphThermoBaroGraphicsScale1Max	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.7	INTEGER	read-only	Scale 1: Maximum.
INT wtWebGraphThermoBaroGraphicsScale2Max	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.8	INTEGER	read-only	Scale 2: Maximum.
INT wtWebGraphThermoBaroGraphicsScale3Max	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.9	INTEGER	read-only	Scale 3: Maximum.
INT wtWebGraphThermoBaroGraphicsScale4Max	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.10	INTEGER	read-only	Scale 4: Maximum.
OCT wtWebGraphThermoBaroGraphicsScale1Unit	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.11	OCTET STRING	read-only	Scale 1: Unit.
OCT wtWebGraphThermoBaroGraphicsScale2Unit	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.12	OCTET STRING	read-only	Scale 2: Unit.
OCT wtWebGraphThermoBaroGraphicsScale3Unit	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.13	OCTET STRING	read-only	Scale 3: Unit.
OCT wtWebGraphThermoBaroGraphicsScale4Unit	1.3.6.1.4.1.5040.1.2.37.3.1.6.3.14	OCTET STRING	read-only	Scale 4: Unit.
wtWebGraphThermoBaroPorts	1.3.6.1.4.1.5040.1.2.37.3.2
wtWebGraphThermoBaroPortTable	1.3.6.1.4.1.5040.1.2.37.3.2.1		not-accessible	List of settings depending on the sensor number.
wtWebGraphThermoBaroPortEntry	1.3.6.1.4.1.5040.1.2.37.3.2.1.1		not-accessible	Sensor parameters for the individual sensors.
OCT wtWebGraphThermoBaroPortName	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.1	OCTET STRING	read-write	Name of the sensor.
OCT wtWebGraphThermoBaroPortText	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.2	OCTET STRING	read-write	Description of the sensor.
OCT wtWebGraphThermoBaroPortOffset1	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.3	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.
OCT wtWebGraphThermoBaroPortTemperature1	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.4	OCTET STRING	read-write	Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphThermoBaroPortOffset2	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.5	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.
OCT wtWebGraphThermoBaroPortTemperature2	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.6	OCTET STRING	read-write	Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphThermoBaroPortComment	1.3.6.1.4.1.5040.1.2.37.3.2.1.1.7	OCTET STRING	read-write	Offset calibration: informations of date, name of operator, reference devices.
OCT wtWebGraphThermoBaroPortAltidude	1.3.6.1.4.1.5040.1.2.37.3.2.2	OCTET STRING	read-write	Altidude oh the Sensor over mean sea level (MSL).
wtWebGraphThermoBaroManufact	1.3.6.1.4.1.5040.1.2.37.3.3
OCT wtWebGraphThermoBaroMfName	1.3.6.1.4.1.5040.1.2.37.3.3.1	OCTET STRING	read-write	Manufacturer company name
OCT wtWebGraphThermoBaroMfAddr	1.3.6.1.4.1.5040.1.2.37.3.3.2	OCTET STRING	read-write	Manufacturer address.
OCT wtWebGraphThermoBaroMfHotline	1.3.6.1.4.1.5040.1.2.37.3.3.3	OCTET STRING	read-write	Manufacturer hotline.
OCT wtWebGraphThermoBaroMfInternet	1.3.6.1.4.1.5040.1.2.37.3.3.4	OCTET STRING	read-write	Manufacturer Internet address.
OCT wtWebGraphThermoBaroMfDeviceTyp	1.3.6.1.4.1.5040.1.2.37.3.3.5	OCTET STRING	read-write	Manufacturer device name (model number).
OCT wtWebGraphThermoBaroMfOrderNo	1.3.6.1.4.1.5040.1.2.37.3.3.6	OCTET STRING	read-write	Manufacturer part number.
wtWebGraphThermoBaroDiag	1.3.6.1.4.1.5040.1.2.37.4
INT wtWebGraphThermoBaroDiagErrorCount	1.3.6.1.4.1.5040.1.2.37.4.1	INTEGER	read-only	Number of entries in the error memory.
OCT wtWebGraphThermoBaroDiagBinaryError	1.3.6.1.4.1.5040.1.2.37.4.2	OCTET STRING	read-only	Error causes coded bit-by-bit.
INT wtWebGraphThermoBaroDiagErrorIndex	1.3.6.1.4.1.5040.1.2.37.4.3	INTEGER	read-write	The value of this variable is used as an index to read an error massege from wtWebGraphThermoBaroDiagErrorMessage. Errors are numbered from 1 to wtWebGraphThermoBaroDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphThermoBaroDiagErrorMessage.
OCT wtWebGraphThermoBaroDiagErrorMessage	1.3.6.1.4.1.5040.1.2.37.4.4	OCTET STRING	read-only	Using wtWebGraphThermoBaroDiagErrorIndex as an index, the appropriate message is available.
INT wtWebGraphThermoBaroDiagErrorClear	1.3.6.1.4.1.5040.1.2.37.4.5	INTEGER	write-only	Writing 1 into this variable clears all diagnosis messages.

RFC description

Monitors temperature, humidity, and barometric pressure readings from WebGraph environmental sensors.

Start monitoring WebGraph environmental monitoring sensor, temperature/humidity/barometric pressure (per-sensor reading/alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WebGraph-Thermo-Hygro-Barometer-US-MIB

What Is WebGraph-Thermo-Hygro-Barometer-US-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description