All MIBs › WebGraph-Thermo-Hygro-Barometer-US-MIB › wtWebGraphThermoBaroSessCntrlLogout
wtWebGraphThermoBaroSessCntrlLogout
Module: WebGraph-Thermo-Hygro-Barometer-US-MIB
OID (symbolic): WebGraph-Thermo-Hygro-Barometer-US-MIB::wtWebGraphThermoBaroSessCntrlLogout
OID (numeric): 1.3.6.1.4.1.5040.1.2.37.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
What is wtWebGraphThermoBaroSessCntrlLogout?
Controls how an open configuration session ends. Writing 1 closes the session and commits (stores) all the changed parameters; writing 2 closes the session but discards the pending changes instead. Reading this object always returns 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.37.2.3 snmpwalk -v2c -c public <target> WebGraph-Thermo-Hygro-Barometer-US-MIB::wtWebGraphThermoBaroSessCntrlLogout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.37.2.3.1 snmpget -v2c -c public <target> WebGraph-Thermo-Hygro-Barometer-US-MIB::wtWebGraphThermoBaroSessCntrlLogout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.37.2.3.1 i <value>
Start monitoring WebGraph environmental monitoring sensor, temperature/humidity/barometric pressure (per-sensor reading/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-Thermo-Hygro-Barometer-US-MIB::wtWebGraphThermoBaroSessCntrlLogout OID value, configure state conditions and alerts, and monitor any WebGraph environmental monitoring sensor, temperature/humidity/barometric pressure (per-sensor reading/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.37 | wtWebGraphThermoBaro | WebGraph-Thermo-Hygro-Barometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.37.2 | wtWebGraphThermoBaroSessCntrl | WebGraph-Thermo-Hygro-Barometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.37.2.3 | wtWebGraphThermoBaroSessCntrlLogout | WebGraph-Thermo-Hygro-Barometer-US-MIB |