WebGraph-AnalogIn-57641-US-MIB

All MIBs › WebGraph-AnalogIn-57641-US-MIB

Category: Power and Environmental Monitoring

Description: Tracks analog input sensor readings on the WebGraph model 57641, along with scaling parameters and threshold alarm states.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WebGraph-AnalogIn-57641-US-MIB?

This is a vendor-specific proprietary MIB from WebGraph for its model 57641 analog input sensor interface, part of a family of networked environmental/telemetry monitoring appliances. It exposes objects for enumerating attached analog input channels, their scaled measured values, derived binary threshold-alarm states, and session/access control settings such as a configuration password and config-mode flag. It supports hardware status monitoring by letting an operator track raw sensor readings and whether they have crossed alarm thresholds, and it supports basic software/access status by exposing whether the device is currently in a configuration session. There is no documented dependency on other MIBs; all objects sit under WebGraph's own enterprise MIB tree. It is typically deployed as a small networked telemetry unit monitoring generic analog inputs (e.g., voltage/current sensors, contact closures) in a rack, cabinet, or equipment room. Network engineers evaluating or troubleshooting this functionality can download the WebGraph-AnalogIn-57641-US-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WebGraph-AnalogIn-57641-US-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WebGraph AnalogIn-57641 networked analog sensor interface

Monitoring Examples

Polling wtWebGraphAnalogIn57641SensorTable/Entry (indexed by wtWebGraphAnalogIn57641SensorNo) enumerates the configured analog channels, and wtWebGraphAnalogIn57641ValuesTable/Entry returns the current scaled reading for each. wtWebGraphAnalogIn57641BinaryValuesTable exposes a per-channel alarm bit that flips when a reading crosses its configured threshold, revealing conditions like a sensor exceeding a safe operating range. wtWebGraphAnalogIn57641SessCntrlConfigMode lets an operator confirm whether the unit is currently locked in a configuration session, which would explain why monitored values are temporarily static.

What Can Be Monitored

analog input channel count
per-channel scaled sensor value
binary threshold alarm state
device configuration-mode/session status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
wut	1.3.6.1.4.1.5040
wtComServer	1.3.6.1.4.1.5040.1
wtWebio	1.3.6.1.4.1.5040.1.2
wtWebGraphAnalogIn57641	1.3.6.1.4.1.5040.1.2.10
NTF wtWebGraphAnalogIn57641Alert1	1.3.6.1.4.1.5040.1.2.10.0.31			This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert2	1.3.6.1.4.1.5040.1.2.10.0.32			This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert3	1.3.6.1.4.1.5040.1.2.10.0.33			This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert4	1.3.6.1.4.1.5040.1.2.10.0.34			This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert5	1.3.6.1.4.1.5040.1.2.10.0.35			This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert6	1.3.6.1.4.1.5040.1.2.10.0.36			This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert7	1.3.6.1.4.1.5040.1.2.10.0.37			This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert8	1.3.6.1.4.1.5040.1.2.10.0.38			This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert9	1.3.6.1.4.1.5040.1.2.10.0.91			This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert10	1.3.6.1.4.1.5040.1.2.10.0.92			This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert11	1.3.6.1.4.1.5040.1.2.10.0.93			This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert12	1.3.6.1.4.1.5040.1.2.10.0.94			This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert13	1.3.6.1.4.1.5040.1.2.10.0.95			This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert14	1.3.6.1.4.1.5040.1.2.10.0.96			This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert15	1.3.6.1.4.1.5040.1.2.10.0.97			This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641Alert16	1.3.6.1.4.1.5040.1.2.10.0.98			This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAnalogIn57641AlertDiag	1.3.6.1.4.1.5040.1.2.10.0.110			This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
wtWebGraphAnalogIn57641Inventory	1.3.6.1.4.1.5040.1.2.10.1
INT wtWebGraphAnalogIn57641Sensors	1.3.6.1.4.1.5040.1.2.10.1.1	INTEGER	read-only	Number of sensors
wtWebGraphAnalogIn57641SensorTable	1.3.6.1.4.1.5040.1.2.10.1.2		not-accessible	List of sensors.
wtWebGraphAnalogIn57641SensorEntry	1.3.6.1.4.1.5040.1.2.10.1.2.1		not-accessible	List of sensor numbers.
INT wtWebGraphAnalogIn57641SensorNo	1.3.6.1.4.1.5040.1.2.10.1.2.1.1	INTEGER	read-only	Sensor number.
wtWebGraphAnalogIn57641ValuesTable	1.3.6.1.4.1.5040.1.2.10.1.3		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphAnalogIn57641ValuesEntry	1.3.6.1.4.1.5040.1.2.10.1.3.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphAnalogIn57641Values	1.3.6.1.4.1.5040.1.2.10.1.3.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 7 characters in length.
wtWebGraphAnalogIn57641BinaryValuesTable	1.3.6.1.4.1.5040.1.2.10.1.4		not-accessible	List of binary measurement values corresponding to the channel numbers.
wtWebGraphAnalogIn57641BinaryValuesEntry	1.3.6.1.4.1.5040.1.2.10.1.4.1		not-accessible	Binary measurement values of the sensors.
INT wtWebGraphAnalogIn57641BinaryValues	1.3.6.1.4.1.5040.1.2.10.1.4.1.1	INTEGER	read-only	Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
wtWebGraphAnalogIn57641SessCntrl	1.3.6.1.4.1.5040.1.2.10.2
OCT wtWebGraphAnalogIn57641SessCntrlPassword	1.3.6.1.4.1.5040.1.2.10.2.1	OCTET STRING	read-write	Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57641SessCntrlLogout. When read this variable provides a string of length zero.
INT wtWebGraphAnalogIn57641SessCntrlConfigMode	1.3.6.1.4.1.5040.1.2.10.2.2	INTEGER	read-only	When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
INT wtWebGraphAnalogIn57641SessCntrlLogout	1.3.6.1.4.1.5040.1.2.10.2.3	INTEGER	read-write	If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
OCT wtWebGraphAnalogIn57641SessCntrlAdminPassword	1.3.6.1.4.1.5040.1.2.10.2.4	OCTET STRING	read-write	This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
OCT wtWebGraphAnalogIn57641SessCntrlConfigPassword	1.3.6.1.4.1.5040.1.2.10.2.5	OCTET STRING	read-write	This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
wtWebGraphAnalogIn57641Config	1.3.6.1.4.1.5040.1.2.10.3
wtWebGraphAnalogIn57641Device	1.3.6.1.4.1.5040.1.2.10.3.1
wtWebGraphAnalogIn57641Text	1.3.6.1.4.1.5040.1.2.10.3.1.1
OCT wtWebGraphAnalogIn57641DeviceName	1.3.6.1.4.1.5040.1.2.10.3.1.1.1	OCTET STRING	read-write	Name of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57641DeviceText	1.3.6.1.4.1.5040.1.2.10.3.1.1.2	OCTET STRING	read-write	Description of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57641DeviceLocation	1.3.6.1.4.1.5040.1.2.10.3.1.1.3	OCTET STRING	read-write	Description of the location of the Webio, which is user definable.
OCT wtWebGraphAnalogIn57641DeviceContact	1.3.6.1.4.1.5040.1.2.10.3.1.1.4	OCTET STRING	read-write	Contact address of the system operator of the Webio, which is user definable.
wtWebGraphAnalogIn57641TimeDate	1.3.6.1.4.1.5040.1.2.10.3.1.2
wtWebGraphAnalogIn57641TimeZone	1.3.6.1.4.1.5040.1.2.10.3.1.2.1
INT wtWebGraphAnalogIn57641TzOffsetHrs	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.1	INTEGER	read-write	Offset hours for the time zone (winter time) with respect to UTC.
INT wtWebGraphAnalogIn57641TzOffsetMin	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.2	INTEGER	read-write	Offset minutes for the time zone (winter time) with respect to UTC.
OCT wtWebGraphAnalogIn57641TzEnable	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
INT wtWebGraphAnalogIn57641StTzOffsetHrs	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.4	INTEGER	read-write	Offset hours of the time zone (summer time) with respect to UTC.
INT wtWebGraphAnalogIn57641StTzOffsetMin	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.5	INTEGER	read-write	Offset minutes of the time zone (summer time) with respect to UTC.
OCT wtWebGraphAnalogIn57641StTzEnable	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.6	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
INT wtWebGraphAnalogIn57641StTzStartMonth	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.7	INTEGER	read-write	Month in which the change is made from winter time to summer time.
INT wtWebGraphAnalogIn57641StTzStartMode	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.8	INTEGER	read-write	Mode of the day of the week for which the change is made from winter time to summer time.
INT wtWebGraphAnalogIn57641StTzStartWday	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.9	INTEGER	read-write	Day of the week on which the change is made from winter time to summer time
INT wtWebGraphAnalogIn57641StTzStartHrs	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.10	INTEGER	read-write	Hour in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAnalogIn57641StTzStartMin	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.11	INTEGER	read-write	Minute in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAnalogIn57641StTzStopMonth	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.12	INTEGER	read-write	Month in which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57641StTzStopMode	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.13	INTEGER	read-write	Mode of the week day on which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57641StTzStopWday	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.14	INTEGER	read-write	Day of the week on which the change is made from summer time to winter time.
INT wtWebGraphAnalogIn57641StTzStopHrs	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.15	INTEGER	read-write	Hour at which the time zone is changed from summer to winter time with respect to UTC.
INT wtWebGraphAnalogIn57641StTzStopMin	1.3.6.1.4.1.5040.1.2.10.3.1.2.1.16	INTEGER	read-write	Minute at which the time zone is changed from summer to winter time with respect to UTC.
wtWebGraphAnalogIn57641TimeServer	1.3.6.1.4.1.5040.1.2.10.3.1.2.2
OCT wtWebGraphAnalogIn57641TimeServer1	1.3.6.1.4.1.5040.1.2.10.3.1.2.2.1	OCTET STRING	read-write	IP address or name of the 1st time server in ASCII
OCT wtWebGraphAnalogIn57641TimeServer2	1.3.6.1.4.1.5040.1.2.10.3.1.2.2.2	OCTET STRING	read-write	IP address or name of the 2nd time server in ASCII
OCT wtWebGraphAnalogIn57641TsEnable	1.3.6.1.4.1.5040.1.2.10.3.1.2.2.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
INT wtWebGraphAnalogIn57641TsSyncTime	1.3.6.1.4.1.5040.1.2.10.3.1.2.2.4	INTEGER	read-write	Daily synchronisation time with the time server (hour: 0-23).
wtWebGraphAnalogIn57641DeviceClock	1.3.6.1.4.1.5040.1.2.10.3.1.2.3
INT wtWebGraphAnalogIn57641ClockHrs	1.3.6.1.4.1.5040.1.2.10.3.1.2.3.1	INTEGER	read-write	Clock hours taking into account the time zone settings.
INT wtWebGraphAnalogIn57641ClockMin	1.3.6.1.4.1.5040.1.2.10.3.1.2.3.2	INTEGER	read-write	Clock minutes taking into account the time zone settings.
INT wtWebGraphAnalogIn57641ClockDay	1.3.6.1.4.1.5040.1.2.10.3.1.2.3.3	INTEGER	read-write	Date: Day of the month, taking into account the time zone settings.
INT wtWebGraphAnalogIn57641ClockMonth	1.3.6.1.4.1.5040.1.2.10.3.1.2.3.4	INTEGER	read-write	Date: Month, taking into account the time zone settings.
INT wtWebGraphAnalogIn57641ClockYear	1.3.6.1.4.1.5040.1.2.10.3.1.2.3.5	INTEGER	read-write	Date: Year, taking into account the time zone settings.
wtWebGraphAnalogIn57641Basic	1.3.6.1.4.1.5040.1.2.10.3.1.3
wtWebGraphAnalogIn57641Network	1.3.6.1.4.1.5040.1.2.10.3.1.3.1
IP wtWebGraphAnalogIn57641IpAddress	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.1	IpAddress	read-write	IP address of the Webio
IP wtWebGraphAnalogIn57641SubnetMask	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.2	IpAddress	read-write	Subnet mask of the Webio
IP wtWebGraphAnalogIn57641Gateway	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.3	IpAddress	read-write	Gateway of the Webio
OCT wtWebGraphAnalogIn57641DnsServer1	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.4	OCTET STRING	read-write	IP address of the 1st DNS server in ASCII
OCT wtWebGraphAnalogIn57641DnsServer2	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.5	OCTET STRING	read-write	IP address of the 2nd DNS server in ASCII
OCT wtWebGraphAnalogIn57641AddConfig	1.3.6.1.4.1.5040.1.2.10.3.1.3.1.6	OCTET STRING	read-write	Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
wtWebGraphAnalogIn57641HTTP	1.3.6.1.4.1.5040.1.2.10.3.1.3.2
OCT wtWebGraphAnalogIn57641Startup	1.3.6.1.4.1.5040.1.2.10.3.1.3.2.1	OCTET STRING	read-write	Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
OCT wtWebGraphAnalogIn57641GetHeaderEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2	OCTET STRING	read-write	If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
INT wtWebGraphAnalogIn57641HttpPort	1.3.6.1.4.1.5040.1.2.10.3.1.3.2.3	INTEGER	read-write	Definition of the standard HTML port (Default: 80).
wtWebGraphAnalogIn57641Mail	1.3.6.1.4.1.5040.1.2.10.3.1.3.3
OCT wtWebGraphAnalogIn57641MailAdName	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.1	OCTET STRING	read-write	Device name for mail administration.
OCT wtWebGraphAnalogIn57641MailReply	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.2	OCTET STRING	read-write	Reply address for the mail server.
OCT wtWebGraphAnalogIn57641MailServer	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.3	OCTET STRING	read-write	Name or IP address of the mail server.
OCT wtWebioAn1MailEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4	OCTET STRING	read-write	Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
OCT wtWebGraphAnalogIn57641MailAuthentication	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.5	OCTET STRING	read-write	Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
OCT wtWebGraphAnalogIn57641MailAuthUser	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.6	OCTET STRING	read-write	Name of the user to be authenticated.
OCT wtWebGraphAnalogIn57641MailAuthPassword	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.7	OCTET STRING	read-write	Authentication password.
OCT wtWebGraphAnalogIn57641MailPop3Server	1.3.6.1.4.1.5040.1.2.10.3.1.3.3.8	OCTET STRING	read-write	Name or Ip-address of the POP3 Servers.
wtWebGraphAnalogIn57641SNMP	1.3.6.1.4.1.5040.1.2.10.3.1.3.4
OCT wtWebGraphAnalogIn57641SnmpCommunityStringRead	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.1	OCTET STRING	read-write	Community string read only
OCT wtWebGraphAnalogIn57641SnmpCommunityStringReadWrite	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.2	OCTET STRING	read-write	Community string read / write
OCT wtWebGraphAnalogIn57641SystemTrapManagerIP	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.3	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the system trap.
OCT wtWebGraphAnalogIn57641SystemTrapEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.4	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
OCT wtWebGraphAnalogIn57641SnmpEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.5	OCTET STRING	read-write	Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
OCT wtWebGraphAnalogIn57641SnmpCommunityStringTrap	1.3.6.1.4.1.5040.1.2.10.3.1.3.4.6	OCTET STRING	read-write	Community string send within traps.
wtWebGraphAnalogIn57641UDP	1.3.6.1.4.1.5040.1.2.10.3.1.3.5
INT wtWebGraphAnalogIn57641UdpPort	1.3.6.1.4.1.5040.1.2.10.3.1.3.5.1	INTEGER	read-write	Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
OCT wtWebGraphAnalogIn57641UdpEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.5.2	OCTET STRING	read-write	Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
wtWebGraphAnalogIn57641Syslog	1.3.6.1.4.1.5040.1.2.10.3.1.3.6
OCT wtWebGraphAnalogIn57641SyslogServerIP	1.3.6.1.4.1.5040.1.2.10.3.1.3.6.1	OCTET STRING	read-write	Name or IP address of the Syslog server, which accepts the Syslog messgaes.
INT wtWebGraphAnalogIn57641SyslogServerPort	1.3.6.1.4.1.5040.1.2.10.3.1.3.6.2	INTEGER	read-write	Portnumber of the Syslog servers, default 514.
OCT wtWebGraphAnalogIn57641SyslogSystemMessagesEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.6.3	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
OCT wtWebGraphAnalogIn57641SyslogEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.6.4	OCTET STRING	read-write	Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
wtWebGraphAnalogIn57641FTP	1.3.6.1.4.1.5040.1.2.10.3.1.3.7
OCT wtWebGraphAnalogIn57641FTPServerIP	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.1	OCTET STRING	read-write	Name or IP address of the FTP server, which accepts the FTP messages.
INT wtWebGraphAnalogIn57641FTPServerControlPort	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.2	INTEGER	read-write	Portnumber of the control port of the FTP server, default 21.
OCT wtWebGraphAnalogIn57641FTPUserName	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.3	OCTET STRING	read-write	FTP Loggin: user name.
OCT wtWebGraphAnalogIn57641FTPPassword	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.4	OCTET STRING	read-write	FTP Loggin: user password.
OCT wtWebGraphAnalogIn57641FTPAccount	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.5	OCTET STRING	read-write	FTP Loggin: name of account.
OCT wtWebGraphAnalogIn57641FTPOption	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.6	OCTET STRING	read-write	Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
OCT wtWebGraphAnalogIn57641FTPEnable	1.3.6.1.4.1.5040.1.2.10.3.1.3.7.7	OCTET STRING	read-write	Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
wtWebGraphAnalogIn57641Datalogger	1.3.6.1.4.1.5040.1.2.10.3.1.4
INT wtWebGraphAnalogIn57641LoggerTimebase	1.3.6.1.4.1.5040.1.2.10.3.1.4.1	INTEGER	read-write	Time base of the data logger
OCT wtWebGraphAnalogIn57641LoggerSensorSel	1.3.6.1.4.1.5040.1.2.10.3.1.4.2	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphAnalogIn57641DisplaySensorSel	1.3.6.1.4.1.5040.1.2.10.3.1.4.3	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
wtWebGraphAnalogIn57641SensorColorTable	1.3.6.1.4.1.5040.1.2.10.3.1.4.4		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphAnalogIn57641SensorColorEntry	1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1		not-accessible	Index numbers of the sensors.
OCT wtWebGraphAnalogIn57641SensorColor	1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphAnalogIn57641AutoScaleEnable	1.3.6.1.4.1.5040.1.2.10.3.1.4.5	OCTET STRING	read-write	If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
OCT wtWebGraphAnalogIn57641VerticalUpperLimit	1.3.6.1.4.1.5040.1.2.10.3.1.4.6	OCTET STRING	read-write	This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641VerticalLowerLimit	1.3.6.1.4.1.5040.1.2.10.3.1.4.7	OCTET STRING	read-write	This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
INT wtWebGraphAnalogIn57641HorizontalZoom	1.3.6.1.4.1.5040.1.2.10.3.1.4.8	INTEGER	read-write	Defines the default zoom stage, if no auto scaling is selected.
wtWebGraphAnalogIn57641Alarm	1.3.6.1.4.1.5040.1.2.10.3.1.5
INT wtWebGraphAnalogIn57641AlarmCount	1.3.6.1.4.1.5040.1.2.10.3.1.5.1	INTEGER	read-only	Number of independent alarms.
wtWebGraphAnalogIn57641AlarmIfTable	1.3.6.1.4.1.5040.1.2.10.3.1.5.2		not-accessible	List of alarm indices.
wtWebGraphAnalogIn57641AlarmIfEntry	1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1		not-accessible	Numbers of the alarms.
INT wtWebGraphAnalogIn57641AlarmNo	1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1.1	INTEGER	read-only	Alarm number.
wtWebGraphAnalogIn57641AlarmTable	1.3.6.1.4.1.5040.1.2.10.3.1.5.3		not-accessible	List of settings depending on the alarm number.
wtWebGraphAnalogIn57641AlarmEntry	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1		not-accessible	Alarm parameters of the individual alarms.
OCT wtWebGraphAnalogIn57641AlarmTrigger	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.1	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphAnalogIn57641AlarmMin	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.2	OCTET STRING	read-write	Minimum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641AlarmMax	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.3	OCTET STRING	read-write	Maximum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641AlarmHysteresis	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.4	OCTET STRING	read-write	Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641AlarmDelay	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.5	OCTET STRING	read-write	Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
OCT wtWebGraphAnalogIn57641AlarmInterval	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.6	OCTET STRING	read-write	Send interval for alarm messages.
OCT wtWebGraphAnalogIn57641AlarmEnable	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.7	OCTET STRING	read-write	Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
OCT wtWebGraphAnalogIn57641AlarmEMailAddr	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.8	OCTET STRING	read-write	E-Mail address for sending the alarm mail to.
OCT wtWebGraphAnalogIn57641AlarmMailSubject	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.9	OCTET STRING	read-write	Subject line for alarm mail.
OCT wtWebGraphAnalogIn57641AlarmMailText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.10	OCTET STRING	read-write	Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAnalogIn57641AlarmManagerIP	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.11	OCTET STRING	read-write	Name or IP address of the SNMP Manager which accepts the trap.
OCT wtWebGraphAnalogIn57641AlarmTrapText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.12	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAnalogIn57641AlarmMailOptions	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.13	OCTET STRING	read-write	Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
OCT wtWebGraphAnalogIn57641AlarmTcpIpAddr	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.14	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the trap.
INT wtWebGraphAnalogIn57641AlarmTcpPort	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.15	INTEGER	read-write	Port number of the TCP server which accepts the trap.
OCT wtWebGraphAnalogIn57641AlarmTcpText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.16	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAnalogIn57641AlarmClearMailSubject	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.17	OCTET STRING	read-write	Subject line for alarm clear mail.
OCT wtWebGraphAnalogIn57641AlarmClearMailText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.18	OCTET STRING	read-write	Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAnalogIn57641AlarmClearTrapText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.19	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAnalogIn57641AlarmClearTcpText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.20	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAnalogIn57641Alarm2Min	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.21	OCTET STRING	read-write	Minimum rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641Alarm2Max	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.22	OCTET STRING	read-write	Maximum rel.Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641Alarm2Hysteresis	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.23	OCTET STRING	read-write	Hysterese rel. Humidity in percent with maximum 2 decimal places.
IP wtWebGraphAnalogIn57641AlarmSyslogIpAddr	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.24	IpAddress	read-write	IP address of the syslog server to which the Webio device should send syslog messages.
INT wtWebGraphAnalogIn57641AlarmSyslogPort	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.25	INTEGER	read-write	Port number of the syslog server to which the Webio device should send syslog messages.
OCT wtWebGraphAnalogIn57641AlarmSyslogText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.26	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphAnalogIn57641AlarmSyslogClearText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.27	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
OCT wtWebGraphAnalogIn57641AlarmFtpDataPort	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.28	OCTET STRING	read-write	Local data port: 1..65535 or AUTO: the next free port will be assigned.
OCT wtWebGraphAnalogIn57641AlarmFtpFileName	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.29	OCTET STRING	read-write	Name of the file including path informations.
OCT wtWebGraphAnalogIn57641AlarmFtpText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.30	OCTET STRING	read-write	Message text to store on the FTP server.
OCT wtWebGraphAnalogIn57641AlarmFtpClearText	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.31	OCTET STRING	read-write	Alarm clear message to store on the FTP server.
OCT wtWebGraphAnalogIn57641AlarmFtpOption	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.32	OCTET STRING	read-write	Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
OCT wtWebGraphAnalogIn57641AlarmTimerCron	1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.33	OCTET STRING	read-write	This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
wtWebGraphAnalogIn57641Graphics	1.3.6.1.4.1.5040.1.2.10.3.1.6
wtWebGraphAnalogIn57641GraphicsBase	1.3.6.1.4.1.5040.1.2.10.3.1.6.1
OCT wtWebGraphAnalogIn57641GraphicsBaseEnable	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.1	OCTET STRING	read-write	Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
INT wtWebGraphAnalogIn57641GraphicsBaseWidth	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.2	INTEGER	read-write	Defines the width of the graphic in pixels.
INT wtWebGraphAnalogIn57641GraphicsBaseHeight	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.3	INTEGER	read-write	Defines the height of the graphic in pixels.
OCT wtWebGraphAnalogIn57641GraphicsBaseFrameColor	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.4	OCTET STRING	read-write	Frame color definition in RGB.
OCT wtWebGraphAnalogIn57641GraphicsBaseBackgroundColor	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.5	OCTET STRING	read-write	Background color definition in RGB.
INT wtWebGraphAnalogIn57641GraphicsBasePollingrate	1.3.6.1.4.1.5040.1.2.10.3.1.6.1.6	INTEGER	read-write	Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
wtWebGraphAnalogIn57641GraphicsSelect	1.3.6.1.4.1.5040.1.2.10.3.1.6.2
OCT wtWebGraphAnalogIn57641GraphicsSelectDisplaySensorSel	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.1	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
OCT wtWebGraphAnalogIn57641GraphicsSelectDisplayShowExtrem	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.2	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
wtWebGraphAnalogIn57641SensorColor2Table	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphAnalogIn57641SensorColor2Entry	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1		not-accessible	Numbers of the sensors.
OCT wtWebGraphAnalogIn57641GraphicsSensorColor	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphAnalogIn57641GraphicsSelectScale	1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.2	OCTET STRING	read-write	Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused
wtWebGraphAnalogIn57641GraphicsScale	1.3.6.1.4.1.5040.1.2.10.3.1.6.3
OCT wtWebGraphAnalogIn57641GraphicsScaleAutoScaleEnable	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.1	OCTET STRING	read-write	Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused
OCT wtWebGraphAnalogIn57641GraphicsScaleAutoFitEnable	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.2	OCTET STRING	read-write	Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused
INT wtWebGraphAnalogIn57641GraphicsScale1Min	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.3	INTEGER	read-only	Scale 1: Minimum.
INT wtWebGraphAnalogIn57641GraphicsScale2Min	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.4	INTEGER	read-only	Scale 2: Minimum.
INT wtWebGraphAnalogIn57641GraphicsScale3Min	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.5	INTEGER	read-only	Scale 3: Minimum.
INT wtWebGraphAnalogIn57641GraphicsScale4Min	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.6	INTEGER	read-only	Scale 4: Minimum.
INT wtWebGraphAnalogIn57641GraphicsScale1Max	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.7	INTEGER	read-only	Scale 1: Maximum.
INT wtWebGraphAnalogIn57641GraphicsScale2Max	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.8	INTEGER	read-only	Scale 2: Maximum.
INT wtWebGraphAnalogIn57641GraphicsScale3Max	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.9	INTEGER	read-only	Scale 3: Maximum.
INT wtWebGraphAnalogIn57641GraphicsScale4Max	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.10	INTEGER	read-only	Scale 4: Maximum.
OCT wtWebGraphAnalogIn57641GraphicsScale1Unit	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.11	OCTET STRING	read-only	Scale 1: Unit.
OCT wtWebGraphAnalogIn57641GraphicsScale2Unit	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.12	OCTET STRING	read-only	Scale 2: Unit.
OCT wtWebGraphAnalogIn57641GraphicsScale3Unit	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.13	OCTET STRING	read-only	Scale 3: Unit.
OCT wtWebGraphAnalogIn57641GraphicsScale4Unit	1.3.6.1.4.1.5040.1.2.10.3.1.6.3.14	OCTET STRING	read-only	Scale 4: Unit.
wtWebGraphAnalogIn57641Ports	1.3.6.1.4.1.5040.1.2.10.3.2
wtWebGraphAnalogIn57641PortTable	1.3.6.1.4.1.5040.1.2.10.3.2.1		not-accessible	List of settings depending on the sensor number.
wtWebGraphAnalogIn57641PortEntry	1.3.6.1.4.1.5040.1.2.10.3.2.1.1		not-accessible	Sensor parameters for the individual sensors.
OCT wtWebGraphAnalogIn57641PortName	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.1	OCTET STRING	read-write	Name of the sensor.
OCT wtWebGraphAnalogIn57641PortText	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.2	OCTET STRING	read-write	Description of the sensor.
OCT wtWebGraphAnalogIn57641PortOffset1	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.3	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.
OCT wtWebGraphAnalogIn57641SetPoint1	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.4	OCTET STRING	read-write	Offset calibration: set point 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641PortOffset2	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.5	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.
OCT wtWebGraphAnalogIn57641SetPoint2	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.6	OCTET STRING	read-write	Offset calibration: set point 2 in degrees with maximum 2 decimal places.
OCT wtWebGraphAnalogIn57641PortComment	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.7	OCTET STRING	read-write	Offset calibration: informations of date, name of operator, reference devices.
OCT wtWebGraphAnalogIn57641PortSensorSelect	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.8	OCTET STRING	read-write	Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused
OCT wtWebGraphAnalogIn57641PortUnit	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.9	OCTET STRING	read-write	User scale: displayed unit.
OCT wtWebGraphAnalogIn57641PortScale0	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.10	OCTET STRING	read-write	User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999
OCT wtWebGraphAnalogIn57641PortScale100	1.3.6.1.4.1.5040.1.2.10.3.2.1.1.11	OCTET STRING	read-write	User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999
wtWebGraphAnalogIn57641Manufact	1.3.6.1.4.1.5040.1.2.10.3.3
OCT wtWebGraphAnalogIn57641MfName	1.3.6.1.4.1.5040.1.2.10.3.3.1	OCTET STRING	read-write	Manufacturer company name
OCT wtWebGraphAnalogIn57641MfAddr	1.3.6.1.4.1.5040.1.2.10.3.3.2	OCTET STRING	read-write	Manufacturer address.
OCT wtWebGraphAnalogIn57641MfHotline	1.3.6.1.4.1.5040.1.2.10.3.3.3	OCTET STRING	read-write	Manufacturer hotline.
OCT wtWebGraphAnalogIn57641MfInternet	1.3.6.1.4.1.5040.1.2.10.3.3.4	OCTET STRING	read-write	Manufacturer Internet address.
OCT wtWebGraphAnalogIn57641MfDeviceTyp	1.3.6.1.4.1.5040.1.2.10.3.3.5	OCTET STRING	read-write	Manufacturer device name (model number).
OCT wtWebGraphAnalogIn57641MfOrderNo	1.3.6.1.4.1.5040.1.2.10.3.3.6	OCTET STRING	read-write	Manufacturer part number.
wtWebGraphAnalogIn57641Diag	1.3.6.1.4.1.5040.1.2.10.4
INT wtWebGraphAnalogIn57641DiagErrorCount	1.3.6.1.4.1.5040.1.2.10.4.1	INTEGER	read-only	Number of entries in the error memory.
OCT wtWebGraphAnalogIn57641DiagBinaryError	1.3.6.1.4.1.5040.1.2.10.4.2	OCTET STRING	read-only	Error causes coded bit-by-bit.
INT wtWebGraphAnalogIn57641DiagErrorIndex	1.3.6.1.4.1.5040.1.2.10.4.3	INTEGER	read-write	The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57641DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalogIn57641DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalogIn57641DiagErrorMessage.
OCT wtWebGraphAnalogIn57641DiagErrorMessage	1.3.6.1.4.1.5040.1.2.10.4.4	OCTET STRING	read-only	Using wtWebGraphAnalogIn57641DiagErrorIndex as an index, the appropriate message is available.
INT wtWebGraphAnalogIn57641DiagErrorClear	1.3.6.1.4.1.5040.1.2.10.4.5	INTEGER	write-only	Writing 1 into this variable clears all diagnosis messages.

RFC description

Monitors WebGraph model 57641 analog input sensor values, scaling parameters, and threshold alarm states.

Start monitoring WebGraph AnalogIn-57641 networked analog sensor interface (channel reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WebGraph-AnalogIn-57641-US-MIB

What Is WebGraph-AnalogIn-57641-US-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description