Unisphere-Data-RADIUS-CLIENT-MIB

All MIBs › Unisphere-Data-RADIUS-CLIENT-MIB

Organization: Unisphere Networks, Inc.

Last Updated: 2002-05-13

Category: Juniper/Unisphere Broadband

Description: Manages RADIUS authentication and accounting client settings on Unisphere ERX broadband routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-RADIUS-CLIENT-MIB?

Unisphere-Data-RADIUS-CLIENT-MIB is a Unisphere Networks, Inc. (Juniper ERX edge router heritage) proprietary MIB configuring RADIUS client behavior for subscriber authentication/accounting. Its objects cover client identifier, algorithm, source address, UDP checksum flag, NAS identifier, DSL port-type format, tunnel-accounting flag, accounting session-ID/NAS-port/calling-station-ID formats, Ethernet port-type format, and numerous include-in-request flags (IP address in Acct-Start, accounting session ID, tunnel connection, called/calling station ID, connect info, NAS identifier/port/port-ID/port-type, PPPoE description) governing exactly which attributes appear in RADIUS Access-Request/Accounting packets. As a configuration MIB it lets an administrator confirm which subscriber-identifying attributes are sent to the RADIUS server on a Juniper (Unisphere ERX) edge router. It is deployed on Juniper Networks (Unisphere/ERX) edge routers (RADIUS client). Engineers can download the Unisphere-Data-RADIUS-CLIENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-RADIUS-CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks (Unisphere/ERX) edge routers (RADIUS client)

Monitoring Examples

An administrator checks usdRadiusClientIncludeCallingStationIdInAccessReq to confirm whether calling-station-ID is sent in RADIUS Access-Requests on a Juniper (Unisphere ERX) edge router.

What Can Be Monitored

RADIUS client attribute-inclusion configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using usdRadiusAuthClientInvalidServerAddresses OID:

Select a Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usdRadiusAuthClientInvalidServerAddresses into the Find box to locate it in the OID tree, then select it and click OK. The number of RADIUS Access-Response packets received from unknown addresses. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdRadiusClientMIB	1.3.6.1.4.1.4874.2.2.19			The RADIUS Client MIB for the Unisphere Networks enterprise.
usdRadiusClientObjects	1.3.6.1.4.1.4874.2.2.19.1
usdRadiusGeneralClient	1.3.6.1.4.1.4874.2.2.19.1.1
STR usdRadiusClientIdentifier	1.3.6.1.4.1.4874.2.2.19.1.1.1	DisplayString	read-only	The NAS-Identifier of the RADIUS client.
INT usdRadiusClientAlgorithm	1.3.6.1.4.1.4874.2.2.19.1.1.2	INTEGER	read-write	The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried.
IP usdRadiusClientSourceAddress	1.3.6.1.4.1.4874.2.2.19.1.1.3	IpAddress	read-write	The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.0.0.0 will reset the value to its default.
T/F usdRadiusClientUdpChecksum	1.3.6.1.4.1.4874.2.2.19.1.1.4	TruthValue	read-write	Enables/disables the checksum calculations on RADIUS UDP packets.
STR usdRadiusClientNasIdentifier	1.3.6.1.4.1.4874.2.2.19.1.1.5	DisplayString	read-write	The identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The default is to use the system name.
INT usdRadiusClientDslPortType	1.3.6.1.4.1.4874.2.2.19.1.1.6	INTEGER	read-write	The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and accounting messages: virtual Used for Virtual interfaces. sdsl Used for Symmetric DSL. adsl-cap Used for Asymmetric DSL, Carrierless Amplitude Phase Modulation. adsl-dmt Used for Asymmetric DSL, Discrete Multi-Tone. idsl Used for ISDN Digital Subscriber Line. xdsl Used for Digital Subscriber Line of unknown type.
T/F usdRadiusClientTunnelAccounting	1.3.6.1.4.1.4874.2.2.19.1.1.7	TruthValue	read-write	Enables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests.
INT usdRadiusClientAcctSessionIdFormat	1.3.6.1.4.1.4874.2.2.19.1.1.8	INTEGER	read-write	The format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value only in the Acct-Session-ID attribute. description Use an ASCII description value which includes the interface type (i.e. ATM), slot, port, and circuit number (VPI and VCI for ATM), and a hexidecimal value in the Acct-Session-ID attribute.
INT usdRadiusClientNasPortFormat	1.3.6.1.4.1.4874.2.2.19.1.1.9	INTEGER	read-write	The format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5) use format of 0 bit, followed by 4 bits for the slot number, 3 bits for the port number, and finally, the circuit number in the remaining bits. ssssxppp In the NAS-Port attribute (attribute 5) use format of 4 bits for the slot number, followed by a 0 bit, 3 bits for the port number and finally, the circuit number in the remaining bits.
STR usdRadiusClientCallingStationDelimiter	1.3.6.1.4.1.4874.2.2.19.1.1.10	DisplayString	read-write	The character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client. The default value is '#'.
INT usdRadiusClientEthernetPortType	1.3.6.1.4.1.4874.2.2.19.1.1.11	INTEGER	read-write	The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and accounting messages: ethernet Used for Ethernet interfaces. virtual Used for Virtual interfaces.
T/F usdRadiusClientIncludeIpAddrInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.12	TruthValue	read-write	Enables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet.
T/F usdRadiusClientIncludeAcctSessionIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.13	TruthValue	read-write	Enables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientRollover	1.3.6.1.4.1.4874.2.2.19.1.1.14	TruthValue	read-write	Enables/disables the rollover to next server on receipt of access-reject.
INT usdRadiusClientCallingStationIdFormat	1.3.6.1.4.1.4874.2.2.19.1.1.15	INTEGER	read-write	The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the format ' '. fixedFomat In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI.
INT usdRadiusClientNasIpAddrUse	1.3.6.1.4.1.4874.2.2.19.1.1.16	INTEGER	read-write	The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4). tunnelClientEndpoint Use the Tunnel Client's address value in the NAS-IP-Addr attribute (attribute 4) for tunnel users.
T/F usdRadiusClientIncludeAcctTunnelConnectionInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.17	TruthValue	read-write	Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeCalledStationIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.18	TruthValue	read-write	Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeCallingStationIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.19	TruthValue	read-write	Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeConnectInfoInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.20	TruthValue	read-write	Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeNasIdentifierInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.21	TruthValue	read-write	Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeNasPortInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.22	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeNasPortIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.23	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeNasPortTypeInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.24	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludePppoeDescriptionInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.25	TruthValue	read-write	Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelClientAuthIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.26	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelClientEndpointInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.27	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelMediumTypeInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.28	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelServerAttributesInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.29	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelServerAuthIdInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.30	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelServerEndpointInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.31	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeTunnelTypeInAccessReq	1.3.6.1.4.1.4874.2.2.19.1.1.32	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet.
T/F usdRadiusClientIncludeAcctTunnelConnectionInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.33	TruthValue	read-write	Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeCalledStationIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.34	TruthValue	read-write	Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeCallingStationIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.35	TruthValue	read-write	Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeClassInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.36	TruthValue	read-write	Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeConnectInfoInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.37	TruthValue	read-write	Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeEgressPolicyNameInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.38	TruthValue	read-write	Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeEventTimestampInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.39	TruthValue	read-write	Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeFramedCompressionInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.40	TruthValue	read-write	Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeFramedIpNetmaskInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.41	TruthValue	read-write	Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeIngressPolicyNameInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.42	TruthValue	read-write	Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeNasIdentifierInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.43	TruthValue	read-write	Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeNasPortInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.44	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeNasPortIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.45	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeNasPortTypeInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.46	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludePppoeDescriptionInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.47	TruthValue	read-write	Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelAssignmentIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.48	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelClientAuthIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.49	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelClientEndpointInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.50	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelMediumTypeInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.51	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelPreferenceInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.52	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelServerAttributesInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.53	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelServerAuthIdInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.54	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelServerEndpointInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.55	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeTunnelTypeInAcctStart	1.3.6.1.4.1.4874.2.2.19.1.1.56	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet.
T/F usdRadiusClientIncludeAcctTunnelConnectionInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.57	TruthValue	read-write	Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeCalledStationIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.59	TruthValue	read-write	Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeCallingStationIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.60	TruthValue	read-write	Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeClassInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.61	TruthValue	read-write	Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeConnectInfoInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.62	TruthValue	read-write	Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeEgressPolicyNameInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.63	TruthValue	read-write	Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeEventTimestampInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.64	TruthValue	read-write	Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeFramedCompressionInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.65	TruthValue	read-write	Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeFramedIpNetmaskInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.66	TruthValue	read-write	Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeIngressPolicyNameInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.67	TruthValue	read-write	Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeInputGigawordsInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.68	TruthValue	read-write	Enables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeNasIdentifierInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.69	TruthValue	read-write	Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeNasPortInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.70	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeNasPortIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.71	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeNasPortTypeInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.72	TruthValue	read-write	Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeOutputGigawordsInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.73	TruthValue	read-write	Enables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludePppoeDescriptionInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.74	TruthValue	read-write	Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelAssignmentIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.75	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelClientAuthIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.76	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelClientEndpointInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.77	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelMediumTypeInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.78	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelPreferenceInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.79	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelServerAttributesInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.80	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelServerAuthIdInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.81	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelServerEndpointInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.82	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeTunnelTypeInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.83	TruthValue	read-write	Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeInputGigapktsInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.84	TruthValue	read-write	Enables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIncludeOutputGigapktsInAcctStop	1.3.6.1.4.1.4874.2.2.19.1.1.85	TruthValue	read-write	Enables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet.
T/F usdRadiusClientIgnoreFramedIpNetmask	1.3.6.1.4.1.4874.2.2.19.1.1.86	TruthValue	read-write	Enables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet.
usdRadiusAuthClient	1.3.6.1.4.1.4874.2.2.19.1.2
C32 usdRadiusAuthClientInvalidServerAddressesEx	1.3.6.1.4.1.4874.2.2.19.1.2.1	Counter32	read-only	The number of RADIUS Access-Response packets received from unknown addresses.
usdRadiusAuthClientServerTable	1.3.6.1.4.1.4874.2.2.19.1.2.2		not-accessible	The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
usdRadiusAuthClientServerEntry	1.3.6.1.4.1.4874.2.2.19.1.2.2.1		not-accessible	An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
IP usdRadiusAuthClientServerAddress	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.1	IpAddress	not-accessible	The IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
I32 usdRadiusAuthClientServerPortNumber	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.2	Integer32	read-only	The UDP port the client is using to send requests to this server.
TIK usdRadiusAuthClientRoundTripTime	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.3	TimeTicks	read-only	The time interval (in hundredths of seconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
C32 usdRadiusAuthClientAccessRequests	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.4	Counter32	read-only	The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
C32 usdRadiusAuthClientAccessRetransmissions	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.5	Counter32	read-only	The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
C32 usdRadiusAuthClientAccessAccepts	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.6	Counter32	read-only	The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
C32 usdRadiusAuthClientAccessRejects	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.7	Counter32	read-only	The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
C32 usdRadiusAuthClientAccessChallenges	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.8	Counter32	read-only	The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
C32 usdRadiusAuthClientMalformedAccessResponses	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.9	Counter32	read-only	The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
C32 usdRadiusAuthClientBadAuthenticators	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.10	Counter32	read-only	The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
G32 usdRadiusAuthClientPendingRequests	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.11	Gauge32	read-only	The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.
C32 usdRadiusAuthClientTimeouts	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.12	Counter32	read-only	The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
C32 usdRadiusAuthClientUnknownTypes	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.13	Counter32	read-only	The number of RADIUS packets of unknown type which were received from this server on the authentication port.
C32 usdRadiusAuthClientPacketsDropped	1.3.6.1.4.1.4874.2.2.19.1.2.2.1.14	Counter32	read-only	The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.
usdRadiusAuthClientCfgServerTable	1.3.6.1.4.1.4874.2.2.19.1.2.3		not-accessible	The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
usdRadiusAuthClientCfgServerEntry	1.3.6.1.4.1.4874.2.2.19.1.2.3.1		not-accessible	An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
IP usdRadiusAuthClientCfgServerAddress	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.1	IpAddress	not-accessible	The IP address of the RADIUS authentication server referred to in this table entry.
I32 usdRadiusAuthClientCfgServerPortNumber	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.2	Integer32	read-create	The UDP port the client is using to send requests to this server.
STR usdRadiusAuthClientCfgKey	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.3	DisplayString	read-create	The secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authenticator is used.
I32 usdRadiusAuthClientCfgTimeoutInterval	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.4	Integer32	read-create	The interval between retransmissions of a request to this authentication server.
I32 usdRadiusAuthClientCfgRetries	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.5	Integer32	read-create	The maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified in the next entry.
I32 usdRadiusAuthClientCfgMaxPendingRequests	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.6	Integer32	read-create	The maximum number of outstanding requests this server can support.
ROW usdRadiusAuthClientCfgRowStatus	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.7	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
I32 usdRadiusAuthClientCfgPrecedence	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.8	Integer32	read-only	Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
I32 usdRadiusAuthClientCfgDeadTime	1.3.6.1.4.1.4874.2.2.19.1.2.3.1.9	Integer32	read-create	The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
usdRadiusAcctClient	1.3.6.1.4.1.4874.2.2.19.1.3
C32 usdRadiusAcctClientInvalidServerAddresses	1.3.6.1.4.1.4874.2.2.19.1.3.1	Counter32	read-only	The number of RADIUS Accounting-Response packets received from unknown addresses.
usdRadiusAcctClientServerTable	1.3.6.1.4.1.4874.2.2.19.1.3.2		not-accessible	The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
usdRadiusAcctClientServerEntry	1.3.6.1.4.1.4874.2.2.19.1.3.2.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
IP usdRadiusAcctClientServerAddress	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.1	IpAddress	not-accessible	The IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
I32 usdRadiusAcctClientServerPortNumber	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.2	Integer32	read-only	The UDP port the client is using to send requests to this server.
TIK usdRadiusAcctClientRoundTripTime	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.3	TimeTicks	read-only	The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
C32 usdRadiusAcctClientRequests	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.4	Counter32	read-only	The number of RADIUS Accounting-Request packets sent. This does not include retransmissions.
C32 usdRadiusAcctClientRetransmissions	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.5	Counter32	read-only	The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.
C32 usdRadiusAcctClientResponses	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.6	Counter32	read-only	The number of RADIUS packets received on the accounting port from this server.
C32 usdRadiusAcctClientMalformedResponses	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.7	Counter32	read-only	The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.
C32 usdRadiusAcctClientBadAuthenticators	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.8	Counter32	read-only	The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.
G32 usdRadiusAcctClientPendingRequests	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.9	Gauge32	read-only	The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
C32 usdRadiusAcctClientTimeouts	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.10	Counter32	read-only	The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.
C32 usdRadiusAcctClientUnknownTypes	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.11	Counter32	read-only	The number of RADIUS packets of unknown type which were received from this server on the accounting port.
C32 usdRadiusAcctClientPacketsDropped	1.3.6.1.4.1.4874.2.2.19.1.3.2.1.12	Counter32	read-only	The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.
usdRadiusAcctClientCfgServerTable	1.3.6.1.4.1.4874.2.2.19.1.3.3		not-accessible	The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
usdRadiusAcctClientCfgServerEntry	1.3.6.1.4.1.4874.2.2.19.1.3.3.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
IP usdRadiusAcctClientCfgServerAddress	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.1	IpAddress	not-accessible	The IP address of the RADIUS accounting server referred to in this table entry.
I32 usdRadiusAcctClientCfgServerPortNumber	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.2	Integer32	read-create	The UDP port the client is using to send requests to this server.
STR usdRadiusAcctClientCfgKey	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.3	DisplayString	read-create	The secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authenticator is used.
I32 usdRadiusAcctClientCfgTimeoutInterval	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.4	Integer32	read-create	The interval between retransmissions of a request to this accounting server.
I32 usdRadiusAcctClientCfgRetries	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.5	Integer32	read-create	The maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in the next entry.
I32 usdRadiusAcctClientCfgMaxPendingRequests	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.6	Integer32	read-create	The maximum number of outstanding requests this server can support.
ROW usdRadiusAcctClientCfgRowStatus	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.7	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
I32 usdRadiusAcctClientCfgPrecedence	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.8	Integer32	read-only	Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
I32 usdRadiusAcctClientCfgDeadTime	1.3.6.1.4.1.4874.2.2.19.1.3.3.1.9	Integer32	read-create	The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
usdRadiusClientMIBConformance	1.3.6.1.4.1.4874.2.2.19.2
usdRadiusClientMIBCompliances	1.3.6.1.4.1.4874.2.2.19.2.1
usdRadiusAuthClientCompliance	1.3.6.1.4.1.4874.2.2.19.2.1.1			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when the usdRadiusClientSourceAddress object was added.
usdRadiusAcctClientCompliance	1.3.6.1.4.1.4874.2.2.19.2.1.2			Obsolete compliance statement for accounting clients implementing the Unisphere RADIUS Client MIB accounting functionality. This statement became obsolete when the usdRadiusClientSourceAddress object was added.
usdRadiusAuthClientCompliance2	1.3.6.1.4.1.4874.2.2.19.2.1.3			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
usdRadiusAcctClientCompliance2	1.3.6.1.4.1.4874.2.2.19.2.1.4			Obsolete compliance statement for accounting clients implementing the Unisphere RADIUS Client MIB accounting functionality. This statement became obsolete when new objects were added.
usdRadiusClientCompliance	1.3.6.1.4.1.4874.2.2.19.2.1.5			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new B-RAS objects were added.
usdRadiusClientCompliance2	1.3.6.1.4.1.4874.2.2.19.2.1.6			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
usdRadiusClientCompliance3	1.3.6.1.4.1.4874.2.2.19.2.1.7			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when the usdRadiusClientNasIpAddrUse object was added.
usdRadiusClientCompliance4	1.3.6.1.4.1.4874.2.2.19.2.1.8			Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
usdRadiusClientCompliance5	1.3.6.1.4.1.4874.2.2.19.2.1.9			The compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality.
usdRadiusClientMIBGroups	1.3.6.1.4.1.4874.2.2.19.2.2
usdRadiusGeneralClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.1			Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when usdRadiusClientSourceAddress was added.
usdRadiusAuthClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.2			The basic collection of objects providing management of RADIUS Authentication Clients.
usdRadiusAcctClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.3			The basic collection of objects providing management of RADIUS Accounting Clients.
usdRadiusGeneralClientGroup2	1.3.6.1.4.1.4874.2.2.19.2.2.4			Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when new objects were added.
usdRadiusBasicClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.5			Obsolete collection of objects providing basic management of RADIUS Clients. This group became obsolete when the usdRadiusClientRollover object was added.
usdRadiusBrasClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.6			Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added.
usdRadiusTunnelClientGroup	1.3.6.1.4.1.4874.2.2.19.2.2.7			An object providing management of tunneling functions for RADIUS Clients.
usdRadiusBrasClientGroup2	1.3.6.1.4.1.4874.2.2.19.2.2.8			Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the usdRadiusClientCallingStationIdFormat object was added.
usdRadiusBasicClientGroup2	1.3.6.1.4.1.4874.2.2.19.2.2.9			A collection of objects providing basic management of RADIUS Clients.
usdRadiusBrasClientGroup3	1.3.6.1.4.1.4874.2.2.19.2.2.10			Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the usdRadiusClientNasIpAddrUse object was added.
usdRadiusBrasClientGroup4	1.3.6.1.4.1.4874.2.2.19.2.2.11			Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
usdRadiusBrasClientGroup5	1.3.6.1.4.1.4874.2.2.19.2.2.12			A collection of objects providing management of general B-RAS functions for RADIUS Clients.

RFC description

Manages RADIUS client authentication and accounting configuration with server failover support.

Start monitoring Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-RADIUS-CLIENT-MIB