All MIBs › Unisphere-Data-RADIUS-CLIENT-MIB › usdRadiusClientNasIpAddrUse
usdRadiusClientNasIpAddrUse
Module: Unisphere-Data-RADIUS-CLIENT-MIB
OID (symbolic): Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientNasIpAddrUse
OID (numeric): 1.3.6.1.4.1.4874.2.2.19.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4). tunnelClientEndpoint Use the Tunnel Client's address value in the NAS-IP-Addr attribute (attribute 4) for tunnel users.
What is usdRadiusClientNasIpAddrUse?
Selects what address value the client puts in the NAS-IP-Addr attribute (attribute 4): normal(0, default) uses the router's own IP address, or tunnelClientEndpoint(1) uses the tunnel client's address for tunnel users. An admin sets this to tunnelClientEndpoint in tunneled deployments where the RADIUS server needs to see the originating tunnel client's address rather than the router's own.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.16 snmpwalk -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientNasIpAddrUse
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.16.1 snmpget -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientNasIpAddrUse.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.19.1.1.16.1 i <value>
Start monitoring Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientNasIpAddrUse OID value, configure state conditions and alerts, and monitor any Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19 | juniRadiusClientMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19.1 | juniRadiusClientObjects | Juniper-RADIUS-CLIENT-MIB |
| 1.3.6.1.4.1.4874.2.2.19.1.1 | juniRadiusGeneralClient | Juniper-RADIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.19.1.1.16 | usdRadiusClientNasIpAddrUse | Unisphere-Data-RADIUS-CLIENT-MIB |