Unisphere-Data-PROFILE-MIB

All MIBs › Unisphere-Data-PROFILE-MIB

Organization: Unisphere Networks, Inc.

Last Updated: 2002-11-19

Category: Juniper/Unisphere Broadband

Description: Manages named subscriber and service profiles on Unisphere ERX broadband routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-PROFILE-MIB?

Unisphere-Data-PROFILE-MIB manages named subscriber and service profiles on Unisphere ERX broadband aggregation routers. It defines tables that map profile names to numeric IDs (usdProfileNameTable, usdProfileIdTable) and track which interfaces have a given profile assigned (usdProfAssignIfTable), covering the configuration category of data rather than physical hardware sensors. Administrators use it to monitor the software-side provisioning state of the router, confirming that the correct service profile (e.g., a QoS or PPP policy template) is applied to a subscriber-facing interface and that profile IDs remain consistent, which is critical for large-scale broadband deployments with thousands of provisioned lines. It has no notable dependency beyond the base Unisphere enterprise MIB tree it belongs to. It is deployed on ERX-series broadband service routers used by ISPs to aggregate DSL/cable subscribers, and operators often load it into a Unisphere-Data-PROFILE-MIB MIB Browser to inspect profile assignments directly.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Unisphere/Juniper ERX broadband edge router

Monitoring Examples

An operator would cross-reference usdProfileNameTable (usdProfileNameName, usdProfileNameId) with usdProfAssignIfTable/usdProfAssignIfIndex to confirm a specific subscriber interface has the intended profile applied. A row appearing in usdProfileIdTable with usdProfileIdId but no matching usdProfAssignIfIndex entry would flag an orphaned or unassigned profile. usdProfileNameRowStatus is checked during provisioning to confirm a new profile was created successfully.

What Can Be Monitored

profile name-to-ID mapping
profile assignment to interfaces
row status of profile provisioning
count of defined profiles

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdProfileMIB	1.3.6.1.4.1.4874.2.2.25			The Profile MIB for the Unisphere Networks Inc. enterprise.
usdProfileObjects	1.3.6.1.4.1.4874.2.2.25.1
usdProfileName	1.3.6.1.4.1.4874.2.2.25.1.1
usdProfileNameTable	1.3.6.1.4.1.4874.2.2.25.1.1.1		not-accessible	The entries in this table provide mappings of configuration profile names to local integer identifiers for those profiles. These integers are used as indexes into other MIB tables containing profile configuration parameters associated with the same profile name.
usdProfileNameEntry	1.3.6.1.4.1.4874.2.2.25.1.1.1.1		not-accessible	A mapping of a profile name to an integer identifier for that name.
STR usdProfileNameName	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.1	DisplayString	read-only	The profile name uniquely identifying this entry.
ROW usdProfileNameRowStatus	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
U32 usdProfileNameId	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.3	Unsigned32	read-only	The integer identifier associated with this profile name. This value of this identifier is assigned by the device when an entry in this table is created.
usdProfileIdTable	1.3.6.1.4.1.4874.2.2.25.1.1.2		not-accessible	Provides inverse mapping of profile IDs to profile names.
usdProfileIdEntry	1.3.6.1.4.1.4874.2.2.25.1.1.2.1		not-accessible	A mapping of an integer identifier to a profile name.
U32 usdProfileIdId	1.3.6.1.4.1.4874.2.2.25.1.1.2.1.1	Unsigned32	not-accessible	The integer identifier associated with this profile name.
STR usdProfileIdName	1.3.6.1.4.1.4874.2.2.25.1.1.2.1.2	DisplayString	read-only	The profile name having the associated identifier.
usdProfileAssign	1.3.6.1.4.1.4874.2.2.25.1.2
usdProfAssignIf	1.3.6.1.4.1.4874.2.2.25.1.2.1
usdProfAssignIfTable	1.3.6.1.4.1.4874.2.2.25.1.2.1.1		not-accessible	Table providing profile assignment to interface/encapsulation pair. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface.
usdProfAssignIfEntry	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1		not-accessible	An assignment of a profile to an interface/encapsulation pair.
NUM usdProfAssignIfIndex	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
USD usdProfAssignIfEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.2	UsdProfileIfEncaps	not-accessible	The encapsulated protocol type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table).
ROW usdProfAssignIfRowStatus	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.3	RowStatus	read-create	For SET, supports only createAndGo(4) and destroy(6). Returns active(1) when read.
U32 usdProfAssignIfProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.4	Unsigned32	read-create	The ID of the profile assigned to this interface/encapsulation pair.
usdProfToIfMapTable	1.3.6.1.4.1.4874.2.2.25.1.2.1.2		not-accessible	Table to report the set of interface/encapsulation pairs assigned to each profile.
usdProfToIfMapEntry	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1		not-accessible	Reports an interface/encapsulation pair assigned to a profile.
U32 usdProfToIfMapProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.1	Unsigned32	not-accessible	The ID of the profile assigned to this interface/encapsulation pair.
NUM usdProfToIfMapIndex	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.2	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
USD usdProfToIfMapEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.3	UsdProfileIfEncaps	read-only	The encapsulation type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation type it supports.
usdProfileMIBConformance	1.3.6.1.4.1.4874.2.2.25.4
usdProfileMIBCompliances	1.3.6.1.4.1.4874.2.2.25.4.1
usdProfileCompliance	1.3.6.1.4.1.4874.2.2.25.4.1.1			Obsolete compliance statement for systems supporting naming of configuration profiles. This statement became obsolete when the interface profile assignment group was added.
usdProfileCompliance2	1.3.6.1.4.1.4874.2.2.25.4.1.2			The compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces.
usdProfileMIBGroups	1.3.6.1.4.1.4874.2.2.25.4.2
usdProfileGroup	1.3.6.1.4.1.4874.2.2.25.4.2.1			The basic collection of objects providing management of Profile naming functionality in a Unisphere product.
usdProfileIfGroup	1.3.6.1.4.1.4874.2.2.25.4.2.2			The basic collection of objects providing management of Profile assignment to interfaces in a Unisphere product.

RFC description

Juniper Networks (formerly Unisphere Data) vendor-private MIB for user/service profile configuration and management.

Start monitoring Unisphere/Juniper ERX broadband edge router (subscriber-profile assignment/provisioning status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-PROFILE-MIB

What Is Unisphere-Data-PROFILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description