All MIBs › Unisphere-Data-RADIUS-CLIENT-MIB › usdRadiusClientUdpChecksum
usdRadiusClientUdpChecksum
Module: Unisphere-Data-RADIUS-CLIENT-MIB
OID (symbolic): Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientUdpChecksum
OID (numeric): 1.3.6.1.4.1.4874.2.2.19.1.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enables/disables the checksum calculations on RADIUS UDP packets.
What is usdRadiusClientUdpChecksum?
Enables or disables (default true) UDP checksum calculation on RADIUS packets sent by the client. An admin would disable this only in unusual environments where checksum overhead needs to be avoided, at the cost of losing that transport-layer integrity check.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.4 snmpwalk -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientUdpChecksum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.4.1 snmpget -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientUdpChecksum.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.19.1.1.4.1 s <value>
Start monitoring Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientUdpChecksum OID value, configure state conditions and alerts, and monitor any Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19 | juniRadiusClientMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19.1 | juniRadiusClientObjects | Juniper-RADIUS-CLIENT-MIB |
| 1.3.6.1.4.1.4874.2.2.19.1.1 | juniRadiusGeneralClient | Juniper-RADIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.19.1.1.4 | usdRadiusClientUdpChecksum | Unisphere-Data-RADIUS-CLIENT-MIB |