All MIBs › Unisphere-Data-RADIUS-CLIENT-MIB › usdRadiusClientAlgorithm
usdRadiusClientAlgorithm
Module: Unisphere-Data-RADIUS-CLIENT-MIB
OID (symbolic): Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientAlgorithm
OID (numeric): 1.3.6.1.4.1.4874.2.2.19.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried.
What is usdRadiusClientAlgorithm?
Selects how the router picks among multiple configured RADIUS servers: direct(0, default) always starts from the highest-precedence server and falls through on failure, or roundRobin(1) cycles through servers starting from the next one each time. An admin would switch to roundRobin to spread load across several RADIUS servers instead of hammering the top-precedence one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.2 snmpwalk -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientAlgorithm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.2.1 snmpget -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientAlgorithm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.19.1.1.2.1 i <value>
Start monitoring Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientAlgorithm OID value, configure state conditions and alerts, and monitor any Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19 | juniRadiusClientMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19.1 | juniRadiusClientObjects | Juniper-RADIUS-CLIENT-MIB |
| 1.3.6.1.4.1.4874.2.2.19.1.1 | juniRadiusGeneralClient | Juniper-RADIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.19.1.1.2 | usdRadiusClientAlgorithm | Unisphere-Data-RADIUS-CLIENT-MIB |