All MIBs › Unisphere-Data-RADIUS-CLIENT-MIB › usdRadiusClientSourceAddress
usdRadiusClientSourceAddress
Module: Unisphere-Data-RADIUS-CLIENT-MIB
OID (symbolic): Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientSourceAddress
OID (numeric): 1.3.6.1.4.1.4874.2.2.19.1.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.0.0.0 will reset the value to its default.
What is usdRadiusClientSourceAddress?
Sets the source IP address the RADIUS client uses when sending requests, so the server's replies come back to this address; setting it to 0.0.0.0 (the default) resets it to the router's normal default. An admin sets this explicitly when RADIUS traffic needs to originate from a specific loopback or management address rather than whatever interface would be chosen by default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.3 snmpwalk -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientSourceAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.3.1 snmpget -v2c -c public <target> Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientSourceAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.19.1.1.3.1 a <value>
Start monitoring Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-RADIUS-CLIENT-MIB::usdRadiusClientSourceAddress OID value, configure state conditions and alerts, and monitor any Juniper Networks (Unisphere/ERX) edge routers, RADIUS client (subscriber-attribute inclusion config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19 | juniRadiusClientMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.19.1 | juniRadiusClientObjects | Juniper-RADIUS-CLIENT-MIB |
| 1.3.6.1.4.1.4874.2.2.19.1.1 | juniRadiusGeneralClient | Juniper-RADIUS-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.19.1.1.3 | usdRadiusClientSourceAddress | Unisphere-Data-RADIUS-CLIENT-MIB |