Unisphere-Data-ACCOUNTING-MIB

All MIBs › Unisphere-Data-ACCOUNTING-MIB

Organization: Unisphere Networks, Inc.

Last Updated: 2001-12-05

Category: Juniper Unisphere ERX Routing

Description: Manages Unisphere ERX router accounting records, billing data collection, and session statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-ACCOUNTING-MIB?

Unisphere-Data-ACCOUNTING-MIB is a vendor MIB from Unisphere Networks (later acquired by Juniper Networks) for the ERX family of edge routing switches, extending the standard connection-oriented accounting framework to router-specific usage tracking. It exposes configuration tables for selecting which interfaces or subtrees generate accounting records, policy names/types governing how records are collected, interface-stack start tables, and controls for accounting file generation. Its monitoring focus is software/service-configuration oriented: administrators use it to verify that billing/usage data collection policies are correctly applied to the right interfaces and that accounting file generation is active, rather than to track hardware health directly. It explicitly augments the IETF Connection-Oriented Accounting MIB (ACCOUNTING-CONTROL-MIB, RFC 2513), building router-specific selection and file-control objects on top of that standard framework. It is typically deployed on Juniper/Unisphere ERX edge routers used by broadband and dial ISPs to generate usage records for subscriber billing. Network engineers evaluating or troubleshooting this functionality can download the Unisphere-Data-ACCOUNTING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-ACCOUNTING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper/Unisphere ERX edge routing switch

Monitoring Examples

An operator would inspect usdAcctngSelectionTable/usdAcctngSelectionEntry rows to confirm which usdAcctngSelectionSubtreeType and usdAcctngSelectionPolicyName apply to a given interface, and check usdAcctngSelectionIfStackStartTable to verify the interface-stack starting point used for record generation. usdAcctngFileControl objects would be polled to confirm that accounting files are being rotated/generated as expected. A missing or misconfigured usdAcctngSelectionPolicyType entry for a subscriber-facing interface would explain gaps in billing records.

What Can Be Monitored

accounting selection policy type
accounting selection mode
interface stack accounting start point
accounting policy name
accounting file generation status

Imported Objects

From ACCOUNTING-CONTROL-MIB

acctngFileEntry	OBJECT-TYPE
acctngSelectionEntry	OBJECT-TYPE
acctngSelectionIndex	OBJECT-TYPE

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From Unisphere-Data-IF-MIB

usdIfType

OBJECT-TYPE

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

From Unisphere-Data-POLICY-MIB

UsdPolicyAttachmentType

From Unisphere-Data-TC

UsdAcctngAdminType
UsdAcctngOperType

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdAcctngMIB	1.3.6.1.4.1.4874.2.2.24			The accounting MIB for the Unisphere Networks enterprise. This MIB augments the Connection Oriented Accounting MIB (ACCOUNTING-CONTROL- MIB) specified in RFC2513.
usdAcctngMIBObjects	1.3.6.1.4.1.4874.2.2.24.1
usdAcctngSelectionControl	1.3.6.1.4.1.4874.2.2.24.1.1
usdAcctngSelectionTable	1.3.6.1.4.1.4874.2.2.24.1.1.1		not-accessible	A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
usdAcctngSelectionEntry	1.3.6.1.4.1.4874.2.2.24.1.1.1.1		not-accessible	An entry used to extend the the selection entry in acctngSelectionEntry. This conceptual row extension is used for Unisphere accounting extensions for connectionless data collection.
BIT usdAcctngSelectionType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1	Bits	read-write	Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType in the base conceptual row determines the selection type. All other bit positions for this object over-ride the acctngSelectionType in the base conceptual row. When the value of this object over-rides the acctngSelectionType object, the following objects have no meaning: ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts ACCOUNTING-CONTROL-MIB.acctngFileMinAge because they control or are related to connection oriented accounting.
INT usdAcctngSelectionMode	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2	INTEGER	read-write	Indicates the data collection mode.
INT usdAcctngSelectionSubtreeType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3	INTEGER	read-only	Indicates the origin of the collection, given the row's subtree. The architecture implementation for statistics collection imposes that rows with distinct usdAcctngSelectionSubtreeType may not be collected into the same accounting file. Conversely, different files (configured from acctngSelectionFile) entries are necessary in order to collect from subtrees (configured from acctngSelectionSubtree) that imply into different subtree types (usdAcctngSelectionSubtreeType).
I32 usdAcctngSelectionMaxIfStackLevels	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4	Integer32	read-write	Indicates the maximum number of levels in the ifStack table to be returned when using the ifStack accounting schema. This object is ignored if acctngSelectionSubtree is not set to usdAcctngSelectionSchemaIfStack. When this object is zero, the entire stack above the starting point(s) given will be returned. When this object is set to 1, only ifIndexes stacked above the starting point(s) given will be returned.
STR usdAcctngSelectionPolicyName	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5	DisplayString	read-write	Specifies the name of the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to usdAcctngSelectionSchemaPolicy.
USD usdAcctngSelectionPolicyType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6	UsdPolicyAttachmentType	read-write	Specifies the attachment point for the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to usdAcctngSelectionSchemaPolicy.
usdAcctngSelectionIfStackStartTable	1.3.6.1.4.1.4874.2.2.24.1.1.3		not-accessible	A list of ifIndexes to be used as starting point when using the ifStack selection schema. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
usdAcctngSelectionIfStackStartEntry	1.3.6.1.4.1.4874.2.2.24.1.1.3.1		not-accessible	An entry used to determine the starting point entry when using the ifStack schema.
NUM usdAcctngSelectionIfStackIfIndex	1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1	InterfaceIndex	not-accessible	The ifIndex to be used as a starting point in the interface stack configuration. The interfaces to be returned in the ifStack schema will start from this value, going up.
ROW usdAcctngSelectionIfStackRowStatus	1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table.
usdAcctngFileControl	1.3.6.1.4.1.4874.2.2.24.1.2
usdAcctngFileTable	1.3.6.1.4.1.4874.2.2.24.1.2.1		not-accessible	A unique value identifying the file transfer behavior and the the file to where accounting data is to be stored.
usdAcctngFileEntry	1.3.6.1.4.1.4874.2.2.24.1.2.1.1		not-accessible	An entry used to extend the file management of acctngFileEntry. This conceptual row extension is used for Unisphere accounting extensions to automate the transfer of accounting data to remote hosts.
INT usdAcctngFileXferMode	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1	INTEGER	read-write	Indicates the mode to use for transfering accounting data to remote client. usdAcctngManualTransfer - Administrator is responsible for manually transfering collected accounting data off of the system. usdAcctngAutomatedTransfer - The agent will automatically transfer the collected accounting data based at a acctngFileIntervals using an entry in the usdFileXferTable pointed to by usdAcctngFileXferIndex. If a manager sets this object to this value, a corresponding row in the usdFileXferTable must exist, otherwise the set command will fail. usdActngTransferOnFileFull - The agent will automatically transfer the collected accounting data when the file reaches the maximum size defined by acctngFileMaximumSize. If a manager sets this object to this value, a corresponding row in the usdFileXferTable must exist, otherwise the set command will fail. usdAcctngRedundantTransfer - The agent will automatically transfer two copies of the accounting data based on the acctngFileInterval. One copy will go to the usdFileXferTable entry identified by usdAcctngFileXferIndex and one copy will go the the usdFileXferTable entry identified by usdAcctngFileXferSecondaryIndex
INT usdAcctngFileXferIndex	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2	INTEGER	read-write	Identifies an entry in the usdFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the usdFileXferTable does not exist or it is not set to usdFileXferAcctngStatistics.
INT usdAcctngFileXferSecondaryIndex	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3	INTEGER	read-write	Identifies a backup or secondary entry in the usdFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the usdFileXferTable does not exist or it is not set to usdFileXferAcctngStatistics.
usdAcctngInterfaceControl	1.3.6.1.4.1.4874.2.2.24.1.3
usdAcctngInterfaceTable	1.3.6.1.4.1.4874.2.2.24.1.3.1		not-accessible	A table controlling the collection of accounting data on specific interfaces types. This table provides an efficient mechanism to enable and/or disable data collection on all interfaces of a specified type.
usdAcctngInterfaceEntry	1.3.6.1.4.1.4874.2.2.24.1.3.1.1		not-accessible	An entry which controls whether accounting data is to be collected on interfaces of a specific type.
NUM usdAcctngInterfaceAdminStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1	UsdAcctngAdminType	read-create	The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding usdIfType for this entry.
USD usdAcctngInterfaceOperStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2	UsdAcctngOperType	read-only	The operational state for accounting data collection on for all interfaces corresponding to this entries type.
ROW usdAcctngInterfaceRowStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3	RowStatus	read-create	Controls creation/deletion of entries in this table.
I32 usdAcctngInterfaceAccntgFileIndex	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4	Integer32	read-create	This object selects the acctngFileTable entry for the collection statistics for this interface type. If there is not an entry in the acctngFileTable with the index indicated by this object, the usdAcctngInterface row will be ignored, unless the following conditions are met: (1) usdAcctngInterfaceAccntgFileIndex is set to zero, which is its default value, and (2) there is only one entry in the acctngFileTable. When the two conditions are met, the interface type will apply to the one existing acctngFileTable entry.
usdAcctngSelectionSchema	1.3.6.1.4.1.4874.2.2.24.2			The root OBJECT IDENTIFIER under which accounting selection tree objects are assigned.
usdAcctngSelectionSchemaIf	1.3.6.1.4.1.4874.2.2.24.2.1
usdAcctngIfInOctets	1.3.6.1.4.1.4874.2.2.24.2.1.1
usdAcctngIfInUcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.2
usdAcctngIfInDiscards	1.3.6.1.4.1.4874.2.2.24.2.1.3
usdAcctngIfInErrors	1.3.6.1.4.1.4874.2.2.24.2.1.4
usdAcctngIfInUnknownProtos	1.3.6.1.4.1.4874.2.2.24.2.1.5
usdAcctngIfOutOctets	1.3.6.1.4.1.4874.2.2.24.2.1.6
usdAcctngIfOutUcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.7
usdAcctngIfOutDiscards	1.3.6.1.4.1.4874.2.2.24.2.1.8
usdAcctngIfOutErrors	1.3.6.1.4.1.4874.2.2.24.2.1.9
usdAcctngIfCorrelator	1.3.6.1.4.1.4874.2.2.24.2.1.10
usdAcctngIfInPolicedOctets	1.3.6.1.4.1.4874.2.2.24.2.1.11
usdAcctngIfInPolicedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.12
usdAcctngIfInSpoofedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.13
usdAcctngIfOutPolicedOctets	1.3.6.1.4.1.4874.2.2.24.2.1.14
usdAcctngIfOutPolicedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.15
usdAcctngIfOutSchedulerDropOctets	1.3.6.1.4.1.4874.2.2.24.2.1.16
usdAcctngIfOutSchedulerDropPkts	1.3.6.1.4.1.4874.2.2.24.2.1.17
usdAcctngIfLowerInterface	1.3.6.1.4.1.4874.2.2.24.2.1.18
usdAcctngIfTimeOffset	1.3.6.1.4.1.4874.2.2.24.2.1.19
usdAcctngifInMulticastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.20
usdAcctngifInBroadcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.21
usdAcctngifOutMulticastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.22
usdAcctngifOutBroadcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.23
usdAcctngSelectionSchemaIfStack	1.3.6.1.4.1.4874.2.2.24.2.3
usdAcctngSelectionSchemaSystem	1.3.6.1.4.1.4874.2.2.24.2.4
usdAcctngSelectionSchemaPolicy	1.3.6.1.4.1.4874.2.2.24.2.5
usdAcctngGreenPackets	1.3.6.1.4.1.4874.2.2.24.2.5.1
usdAcctngUpperGreenPackets	1.3.6.1.4.1.4874.2.2.24.2.5.2
usdAcctngYellowPackets	1.3.6.1.4.1.4874.2.2.24.2.5.3
usdAcctngUpperYellowPackets	1.3.6.1.4.1.4874.2.2.24.2.5.4
usdAcctngRedPackets	1.3.6.1.4.1.4874.2.2.24.2.5.5
usdAcctngUpperRedPackets	1.3.6.1.4.1.4874.2.2.24.2.5.6
usdAcctngGreenBytes	1.3.6.1.4.1.4874.2.2.24.2.5.7
usdAcctngUpperGreenBytes	1.3.6.1.4.1.4874.2.2.24.2.5.8
usdAcctngYellowBytes	1.3.6.1.4.1.4874.2.2.24.2.5.9
usdAcctngUpperYellowBytes	1.3.6.1.4.1.4874.2.2.24.2.5.10
usdAcctngRedBytes	1.3.6.1.4.1.4874.2.2.24.2.5.11
usdAcctngUpperRedBytes	1.3.6.1.4.1.4874.2.2.24.2.5.12
usdAcctngConformance	1.3.6.1.4.1.4874.2.2.24.3
usdAcctngGroups	1.3.6.1.4.1.4874.2.2.24.3.1
usdAcctngBasicGroup	1.3.6.1.4.1.4874.2.2.24.3.1.1			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when usdAcctngSelectionSubtreeType was deprecated.
usdAcctngBasicGroup2	1.3.6.1.4.1.4874.2.2.24.3.1.2			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when selection policy name and type objects were added.
usdAcctngBasicGroup3	1.3.6.1.4.1.4874.2.2.24.3.1.3			A collection of objects providing control of the basic collection of accounting data for connection-less networks.
usdAcctngCompliances	1.3.6.1.4.1.4874.2.2.24.3.2
usdAcctngCompliance	1.3.6.1.4.1.4874.2.2.24.3.2.1			Obsolete compliance statement for switches that implement the RedStone Accounting Control MIB. This statement became obsolete when the usdAcctngSelectionSubtreeType object was deprecated.
usdAcctngCompliance2	1.3.6.1.4.1.4874.2.2.24.3.2.2			Obsolete compliance statement for switches that implement the RedStone Accounting Control MIB. This statement became obsolete when selection policy name and type objects were added.
usdAcctngCompliance3	1.3.6.1.4.1.4874.2.2.24.3.2.3			The compliance statement for switches that implement the RedStone Accounting Control MIB.

RFC description

Accounting MIB for Unisphere Networks enterprise systems augmenting Connection Oriented Accounting features.

Start monitoring Juniper/Unisphere ERX edge routing switch (accounting-policy/interface-selection config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-ACCOUNTING-MIB

What Is Unisphere-Data-ACCOUNTING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description