All MIBs › Unisphere-Data-ACCOUNTING-MIB › usdAcctngFileXferIndex
usdAcctngFileXferIndex
Module: Unisphere-Data-ACCOUNTING-MIB
OID (symbolic): Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Identifies an entry in the usdFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the usdFileXferTable does not exist or it is not set to usdFileXferAcctngStatistics.
What is usdAcctngFileXferIndex?
This value identifies the entry in the usdFileXferTable that defines the transfer parameters, such as destination server and protocol, used when the agent automatically transfers accounting files. An admin sets this to point at a pre-configured file-transfer destination, and the set will fail if no matching, correctly configured usdFileXferTable entry exists. For example, usdAcctngFileXferIndex=3 would point automated transfers at the third configured file-transfer destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2 snmpwalk -v2c -c public <target> Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2.1 snmpget -v2c -c public <target> Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2.1 i <value>
Start monitoring Juniper/Unisphere ERX edge routing switch (accounting-policy/interface-selection config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferIndex OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge routing switch (accounting-policy/interface-selection config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.24 | juniAcctngMIB | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1 | juniAcctngMIBObjects | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2 | juniAcctngFileControl | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2.1 | juniAcctngFileTable | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2.1.1 | juniAcctngFileEntry | Juniper-ACCOUNTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2 | usdAcctngFileXferIndex | Unisphere-Data-ACCOUNTING-MIB |