All MIBs › Unisphere-Data-ACCOUNTING-MIB › usdAcctngFileXferSecondaryIndex
usdAcctngFileXferSecondaryIndex
Module: Unisphere-Data-ACCOUNTING-MIB
OID (symbolic): Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferSecondaryIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Identifies a backup or secondary entry in the usdFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the usdFileXferTable does not exist or it is not set to usdFileXferAcctngStatistics.
What is usdAcctngFileXferSecondaryIndex?
This value identifies a backup entry in the usdFileXferTable used as the second destination when usdAcctngFileXferMode is set to usdAcctngRedundantTransfer, and the set will fail if no matching, correctly configured entry exists. An admin configures this alongside usdAcctngFileXferIndex to ensure accounting data reaches a second server if the primary transfer destination is unavailable. For example, pairing a primary index of 3 with a secondary index of 4 sends redundant copies of each accounting file to two different servers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3 snmpwalk -v2c -c public <target> Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferSecondaryIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3.1 snmpget -v2c -c public <target> Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferSecondaryIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3.1 i <value>
Start monitoring Juniper/Unisphere ERX edge routing switch (accounting-policy/interface-selection config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ACCOUNTING-MIB::usdAcctngFileXferSecondaryIndex OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge routing switch (accounting-policy/interface-selection config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.24 | juniAcctngMIB | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1 | juniAcctngMIBObjects | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2 | juniAcctngFileControl | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2.1 | juniAcctngFileTable | Juniper-ACCOUNTING-MIB |
| 1.3.6.1.4.1.4874.2.2.24.1.2.1.1 | juniAcctngFileEntry | Juniper-ACCOUNTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3 | usdAcctngFileXferSecondaryIndex | Unisphere-Data-ACCOUNTING-MIB |