| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpicfTrafficTemplateMIB | 1.3.6.1.4.1.11.2.14.11.5.1.72 | | | This MIB defines HP proprietary objects used to configure
traffic templates for CoS (Class of Service) queuing. |
| hpicfTrafficTemplateObjects | 1.3.6.1.4.1.11.2.14.11.5.1.72.1 | | | |
| hpicfTrafficTemplateScalars | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.1 | | | |
| OCT hpSwitchTrafficTemplateSystemDefaultName | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.1.1 | OCTET STRING | read-write | The name of the traffic template used as the system default
when no name has been explicitly set. Limited to 40 characters
on some devices. |
| hpSwitchTrafficTemplate | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2 | | | |
| hpSwitchTrafficTemplateTable | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1 | | not-accessible | A table that contains information about traffic templates
for CoS (class of service) queue configuration in the device. |
| hpSwitchTrafficTemplateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1 | | not-accessible | Information about a single traffic template for CoS queue
configuration in the device. |
| STR hpSwitchTrafficTemplateName | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1.1 | DisplayString | not-accessible | A unique name by which this template is referenced.
Limited to 40 characters on some devices. |
| POR hpSwitchTrafficTemplateMappedPorts | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1.2 | PortList | read-create | The set of ports to which this traffic template is
mapped. The set of ports is identified by a PortList
in which each port is represented by a bit. A port
cannot be mapped to more than one traffic template.
Not all devices support different traffic templates
for different ports. The port map is ignored on
devices that use a common template for all ports. |
| ROW hpSwitchTrafficTemplateRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1.3 | RowStatus | read-create | The Row Status of this traffic template entry.
To create a new traffic template, send a SET
request with a RowStatus of 'createAndWait'.
This will result in the creation of a template of that
name and a new hpSwitchTrafficGroupTable entry with
system default values.
active - all traffic groups in the template row are valid
and the template is applied to one or more interfaces.
notReady - template is not valid or is undergoing
modification.
notInService - template is valid, but is not applied
to any interface.
createAndWait - create a new traffic template.
delete - delete the traffic template.
createAndGo - not valid for this table.
A device reboot is required to apply updated templates
to their interfaces. |
| I32 hpSwitchTrafficTemplateNumQueues | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1.4 | Integer32 | read-write | The number of egress queues this template is valid for. |
| T/F hpSwitchTrafficTemplatePredefined | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.1.1.5 | TruthValue | read-only | Indicates that this template is factory predefined.
Predefined templates may not be deleted and their queue
configuration may not be modified. |
| hpSwitchTrafficGroupTable | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2 | | not-accessible | A table that contains the mapping of 802.1q packet
priorities to CoS traffic queues in the device.
Entries in this table define traffic class groups
containing a queue number, an optional ID number, a
set of priority values mapped to the queue, an
optional name, and a lossless flag when Priority
Flow Control is enabled for a port.
A SET to an object in any row of this table causes
the RowStatus of the parent template to change to
notReady. Changes are temporary until the template
RowStatus is successfully SET to active. |
| hpSwitchTrafficGroupEntry | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1 | | not-accessible | Traffic group configuration for a given queue. |
| I32 hpSwitchTrafficQueue | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.1 | Integer32 | not-accessible | The internal number of the queue this entry will apply to. |
| I32 hpSwitchTrafficGroupID | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.2 | Integer32 | read-write | The ID value of this traffic class group in the DCBX
exchange. Only IDs 0-7 are allowed in a SET request.
This setting is not supported on all devices. |
| OCT hpSwitchTrafficGroupName | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.3 | OCTET STRING | read-write | An optional user-defined name for this traffic group.
Limited to 40 characters on some devices. |
| BIT hpSwitchTrafficGroupPriorityMap | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.4 | Bits | read-write | A bitmap of 802.1q priority values assigned to this
traffic group. Each priority value 0-7 must be
assigned to exactly one group for the template
to be valid. |
| T/F hpSwitchTrafficGroupLossless | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.5 | TruthValue | read-write | A flag indicating that this queue is to be
configured for lossless behavior when Priority Flow
Control (PFC) is enabled on a port. Designating a
queue as lossless causes ingress thresholds to be
set that will trigger PFC frames when this queue
exceeds or falls below a specific threshold. The
queue will also respond to PFC frames received from
a neighbor.
This flag may not be set if any queue in the template
is configured for a 'medium' or 'low' discard threshold
(see hpSwitchTrafficGroupEgressDiscardThreshold).
This flag is not supported on all devices. |
| INT hpSwitchTrafficGroupEgressDiscardThreshold | 1.3.6.1.4.1.11.2.14.11.5.1.72.1.2.2.1.6 | INTEGER | read-write | The Egress Buffer Discard Threshold setting for this
traffic group. This setting controls the maximum size
of the group egress queue. When set to 'medium' or 'low',
the maximum number of buffers permitted in the queue is
reduced so packets are dropped sooner and their buffers
made available for higher priority traffic. However,
this also reduces the maximum traffic burst that can be
absorbed without dropping packets. The default is 'high'.
This setting may not be changed if any queue in the
template is configured for lossless behavior (see
hpSwitchTrafficGroupLossless).
This setting is not supported on all devices. |
| hpicfTrafficTempalteConformance | 1.3.6.1.4.1.11.2.14.11.5.1.72.2 | | | |
| hpicfTrafficTemplateGroups | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1 | | | |
| hpicfTrafficTemplateScalarGroup | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1.1 | | | A collection of scalars related to traffic template
configuration. |
| hpicfTrafficTemplateGroup | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1.2 | | | ###DEPRECATED###
A collection of objects providing configuration
of traffic templates.
This conformance is deprecated and replaced by
hpicfTrafficTemplateGroup2. |
| hpicfTrafficGroup | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1.3 | | | ###DEPRECATED###
A collection of objects providing configuration
of traffic groups in a template.
This conformance is deprecated and replaced by
hpicfTrafficGroup2. |
| hpicfTrafficTemplateGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1.4 | | | A collection of objects providing configuration
of traffic templates. |
| hpicfTrafficGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.1.5 | | | A collection of objects providing configuration
of traffic groups in a template. |
| hpicfTrafficTemplateCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.2 | | | |
| hpicfTrafficTemplateCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.2.1 | | | ###DEPRECATED###
The compliance statement for device support of
TRAFFIC-TEMPLATE-MIB.
This compliance is deprecated and replaced by
hpicfTrafficTemplateCompliance2. |
| hpicfTrafficTemplateCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.72.2.2.2 | | | The compliance statement for device support of
TRAFFIC-TEMPLATE-MIB. |
