All MIBs › QB-QOS-MGMT-MIB
Organization: Quantum Bridge
Last Updated: 2001-01-02
Category: QoS and Traffic Management
Description: Manages Quantum Bridge QoS policy configuration including traffic classification, queuing, and bandwidth allocation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is QB-QOS-MGMT-MIB?
QB-QOS-MGMT-MIB is a vendor-specific MIB for Quantum Bridge (QB) network devices that manages the vendor's proprietary Quality of Service capability, which is built around policing and thresholding rather than classic queuing. It exposes configuration objects describing QoS policies that administrators define to share an interface's available bandwidth fairly among traffic flows. From a monitoring standpoint it lets an operator confirm that configured policing/thresholding policies are in place and applied to the correct interfaces, serving as a software/configuration status check rather than exposing hardware environmentals. It is a self-contained vendor-proprietary QoS scheme, though it logically depends on standard interface objects (IF-MIB) to associate policies with specific ports. Typical deployment is on Quantum Bridge switches or access devices where bandwidth-sharing policies must be verified as correctly provisioned. Network engineers evaluating or troubleshooting this functionality can download the QB-QOS-MGMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in QB-QOS-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Quantum Bridge network bridge/switch devices
Monitoring Examples
Because no concrete object or table names were captured for this module, a precise polling example cannot be given; conceptually an administrator would review the configured policing and thresholding policy objects per interface to verify that bandwidth-sharing rules match the intended administrative policy and that no interface is left without an expected QoS policy applied.
What Can Be Monitored
- QoS policing policy configuration
- bandwidth thresholding settings
- per-interface QoS policy assignment
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From QUANTUMBRIDGE-REG
| qbMibs | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
RFC description
Vendor-private MIB for quality-of-service management, defining metrics for QoS policy enforcement and bandwidth allocation.
Start monitoring Quantum Bridge network bridge/switch devices (policing/thresholding QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.