All MIBs › TRAPEZE-NETWORKS-AP-STATUS-MIB
Organization: Trapeze Networks
Last Updated: 2012-02-10
Category: Network Monitoring and Statistics, Wireless LAN Management
Description: Monitors Trapeze Networks wireless access point operational status, association counts, and uptime.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TRAPEZE-NETWORKS-AP-STATUS-MIB?
TRAPEZE-NETWORKS-AP-STATUS-MIB is a Trapeze Networks (later Juniper) MIB implemented on the Access Controller (AC/wireless switch) to report the operational status of the thin Access Points (APs) it manages. It exposes an AP status table with fields such as AP state, serial number, base MAC address, model, attach type, port/DAP number, and VLAN, plus a summary count of managed APs. Its monitoring focus is hardware/operational status: it lets administrators see which APs are up, down, or in a transitional state, effectively serving as a fault-detection tool for the wireless access layer. It works alongside other Trapeze MIBs, such as TRAPEZE-NETWORKS-RF-NOISE-TC-MIB, which supplies shared textual conventions for RF-related data used elsewhere in the same MIB suite. It is deployed in enterprise wireless LAN environments built on Trapeze/Juniper wireless switches with centrally managed access points. Engineers can download the TRAPEZE-NETWORKS-AP-STATUS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TRAPEZE-NETWORKS-AP-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Trapeze Networks (Juniper) thin access point
- Trapeze Networks Access Controller/wireless switch
Monitoring Examples
The trpzApStatApStatusTable/trpzApStatApStatusEntry rows, keyed by trpzApStatApStatusSerialNum, report each AP's trpzApStatApStatusApState, trpzApStatApStatusModel, and trpzApStatApStatusBaseMac, while trpzApStatNumAps gives the total AP count currently seen by the controller. An admin polling this table could detect an AP whose apState has transitioned to a down or lost state, indicating an uplink failure or AP crash, and cross-reference trpzApStatApStatusPortOrDapNum to pinpoint which switch port or distributed AP link is affected.
What Can Be Monitored
- AP operational state
- total managed AP count
- AP model and serial number
- AP attach type
- VLAN assignment
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
| TrpzApAttachType | |
| TrpzApFingerprint | |
| TrpzApNum | |
| TrpzApPortOrDapNum | |
| TrpzApSerialNum | |
| TrpzApState | |
| TrpzChannelNum | |
| TrpzPowerLevel | |
| TrpzRadioChannelWidth | |
| TrpzRadioConfigState | |
| TrpzRadioEnable | |
| TrpzRadioMimoState | |
| TrpzRadioMode | |
| TrpzRadioNum | |
| TrpzRadioRate | |
| TrpzRadioRateEx | |
| TrpzRadioType |
From TRAPEZE-NETWORKS-BASIC-TC
| TrpzPhysPortNumberOrZero |
From TRAPEZE-NETWORKS-ROOT-MIB
| trpzMibs | OBJECT-IDENTITY |
How to Use in IPNetwork Monitor
Example using trpzApStatRadioOpStatsTxUniPkt OID:
Select a Trapeze Networks (Juniper) thin access point / Access Controller (AP up/down operational-state status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type trpzApStatRadioOpStatsTxUniPkt into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of unicast packets transmitted. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| trpzApStatusMib | 1.3.6.1.4.1.14525.4.5 | AP Status objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2005-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| trpzApStatusObjects | 1.3.6.1.4.1.14525.4.5.1 | |||
| trpzApStatDataObjects | 1.3.6.1.4.1.14525.4.5.1.1 | |||
| U32 trpzApStatNumAps | 1.3.6.1.4.1.14525.4.5.1.1.1 | Unsigned32 | read-only | Number of APs present and seen by AC (AP in ''ALIVE'' state). |
| trpzApStatApStatusTable | 1.3.6.1.4.1.14525.4.5.1.1.2 | not-accessible | A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by MAC in 'trpzApStatApStatusMacTable'. | |
| trpzApStatApStatusEntry | 1.3.6.1.4.1.14525.4.5.1.1.2.1 | not-accessible | Information about a particular AP attached to the AC. | |
| TRP trpzApStatApStatusSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.2.1.1 | TrpzApSerialNum | not-accessible | The Serial Number of this AP. |
| MAC trpzApStatApStatusBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.2.1.2 | MacAddress | read-only | The Base MAC address of this AP. |
| TRP trpzApStatApStatusAttachType | 1.3.6.1.4.1.14525.4.5.1.1.2.1.3 | TrpzApAttachType | read-only | How this AP is attached to the AC (directly or via L2/L3 network). |
| TRP trpzApStatApStatusPortOrDapNum | 1.3.6.1.4.1.14525.4.5.1.1.2.1.4 | TrpzApPortOrDapNum | read-only | The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by trpzApStatApStatusApNum. |
| TRP trpzApStatApStatusApState | 1.3.6.1.4.1.14525.4.5.1.1.2.1.5 | TrpzApState | read-only | The State of this AP. |
| STR trpzApStatApStatusModel | 1.3.6.1.4.1.14525.4.5.1.1.2.1.6 | DisplayString | read-only | The Model name of this AP. |
| NUM trpzApStatApStatusFingerprint | 1.3.6.1.4.1.14525.4.5.1.1.2.1.7 | TrpzApFingerprint | read-only | The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string. |
| STR trpzApStatApStatusApName | 1.3.6.1.4.1.14525.4.5.1.1.2.1.8 | DisplayString | read-only | The name of this AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). |
| STR trpzApStatApStatusVlan | 1.3.6.1.4.1.14525.4.5.1.1.2.1.9 | DisplayString | read-only | The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string. |
| IP trpzApStatApStatusIpAddress | 1.3.6.1.4.1.14525.4.5.1.1.2.1.10 | IpAddress | read-only | The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0. |
| U32 trpzApStatApStatusUptimeSecs | 1.3.6.1.4.1.14525.4.5.1.1.2.1.11 | Unsigned32 | read-only | Time in seconds since this AP's last boot. |
| STR trpzApStatApStatusCpuInfo | 1.3.6.1.4.1.14525.4.5.1.1.2.1.12 | DisplayString | read-only | Information about this AP's CPU. |
| STR trpzApStatApStatusManufacturerId | 1.3.6.1.4.1.14525.4.5.1.1.2.1.13 | DisplayString | read-only | Information about this AP's manufacturer. |
| U32 trpzApStatApStatusRamBytes | 1.3.6.1.4.1.14525.4.5.1.1.2.1.14 | Unsigned32 | read-only | The memory capacity of this AP (in bytes). |
| STR trpzApStatApStatusHardwareRev | 1.3.6.1.4.1.14525.4.5.1.1.2.1.15 | DisplayString | read-only | The hardware revision of this AP (e.g. 'A3'). |
| U32 trpzApStatApStatusClientSessions | 1.3.6.1.4.1.14525.4.5.1.1.2.1.16 | Unsigned32 | read-only | The number of client sessions on this AP. |
| STR trpzApStatApStatusSoftwareVer | 1.3.6.1.4.1.14525.4.5.1.1.2.1.17 | DisplayString | read-only | The software version for this AP. |
| STR trpzApStatApStatusBootVer | 1.3.6.1.4.1.14525.4.5.1.1.2.1.18 | DisplayString | read-only | The boot loader version for this AP. |
| TRP trpzApStatApStatusApNum | 1.3.6.1.4.1.14525.4.5.1.1.2.1.19 | TrpzApNum | read-only | The administratively assigned AP Number. Obsoletes trpzApStatApStatusPortOrDapNum. |
| TRP trpzApStatApStatusPhysPortNum | 1.3.6.1.4.1.14525.4.5.1.1.2.1.20 | TrpzPhysPortNumberOrZero | read-only | Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero. |
| IP trpzApStatApStatusIpNetmask | 1.3.6.1.4.1.14525.4.5.1.1.2.1.21 | IpAddress | read-only | The IP Netmask of this AP. Only valid for network attached APs, otherwise 0.0.0.0. |
| U32 trpzApStatApStatusWiredIfNumber | 1.3.6.1.4.1.14525.4.5.1.1.2.1.22 | Unsigned32 | read-only | The number of wired network interfaces (regardless of their current state) present on this AP. |
| trpzApStatApStatusMacTable | 1.3.6.1.4.1.14525.4.5.1.1.3 | not-accessible | A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Serial Number in 'trpzApStatApStatusTable'. | |
| trpzApStatApStatusMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.3.1 | not-accessible | Information about a particular AP attached to the AC. | |
| MAC trpzApStatApStatusMacBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.3.1.1 | MacAddress | not-accessible | The Base MAC address of this AP. |
| TRP trpzApStatApStatusMacSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.3.1.2 | TrpzApSerialNum | read-only | The Serial Number of this AP. |
| TRP trpzApStatApStatusMacAttachType | 1.3.6.1.4.1.14525.4.5.1.1.3.1.3 | TrpzApAttachType | read-only | How this AP is attached to the AC (directly or via L2/L3 network). |
| TRP trpzApStatApStatusMacPortOrDapNum | 1.3.6.1.4.1.14525.4.5.1.1.3.1.4 | TrpzApPortOrDapNum | read-only | The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by trpzApStatApStatusMacApNum. |
| TRP trpzApStatApStatusMacApState | 1.3.6.1.4.1.14525.4.5.1.1.3.1.5 | TrpzApState | read-only | The State of this AP. |
| STR trpzApStatApStatusMacModel | 1.3.6.1.4.1.14525.4.5.1.1.3.1.6 | DisplayString | read-only | The Model name of this AP. |
| NUM trpzApStatApStatusMacFingerprint | 1.3.6.1.4.1.14525.4.5.1.1.3.1.7 | TrpzApFingerprint | read-only | The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string. |
| STR trpzApStatApStatusMacApName | 1.3.6.1.4.1.14525.4.5.1.1.3.1.8 | DisplayString | read-only | The name of this AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). |
| STR trpzApStatApStatusMacVlan | 1.3.6.1.4.1.14525.4.5.1.1.3.1.9 | DisplayString | read-only | The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string. |
| IP trpzApStatApStatusMacIpAddress | 1.3.6.1.4.1.14525.4.5.1.1.3.1.10 | IpAddress | read-only | The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0. |
| U32 trpzApStatApStatusMacUptimeSecs | 1.3.6.1.4.1.14525.4.5.1.1.3.1.11 | Unsigned32 | read-only | Time in seconds since this AP's last boot. |
| STR trpzApStatApStatusMacCpuInfo | 1.3.6.1.4.1.14525.4.5.1.1.3.1.12 | DisplayString | read-only | Information about this AP's CPU. |
| STR trpzApStatApStatusMacManufacturerId | 1.3.6.1.4.1.14525.4.5.1.1.3.1.13 | DisplayString | read-only | Information about this AP's manufacturer. |
| U32 trpzApStatApStatusMacRamBytes | 1.3.6.1.4.1.14525.4.5.1.1.3.1.14 | Unsigned32 | read-only | The memory capacity of this AP (in bytes). |
| STR trpzApStatApStatusMacHardwareRev | 1.3.6.1.4.1.14525.4.5.1.1.3.1.15 | DisplayString | read-only | The hardware revision of this AP (e.g. 'A3'). |
| U32 trpzApStatApStatusMacClientSessions | 1.3.6.1.4.1.14525.4.5.1.1.3.1.16 | Unsigned32 | read-only | The number of client sessions on this AP. |
| STR trpzApStatApStatusMacSoftwareVer | 1.3.6.1.4.1.14525.4.5.1.1.3.1.17 | DisplayString | read-only | The software version for this AP. |
| STR trpzApStatApStatusMacBootVer | 1.3.6.1.4.1.14525.4.5.1.1.3.1.18 | DisplayString | read-only | The boot loader version for this AP. |
| TRP trpzApStatApStatusMacApNum | 1.3.6.1.4.1.14525.4.5.1.1.3.1.19 | TrpzApNum | read-only | The administratively assigned AP Number. Obsoletes trpzApStatApStatusMacPortOrDapNum. |
| TRP trpzApStatApStatusMacPhysPortNum | 1.3.6.1.4.1.14525.4.5.1.1.3.1.20 | TrpzPhysPortNumberOrZero | read-only | Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero. |
| IP trpzApStatApStatusMacIpNetmask | 1.3.6.1.4.1.14525.4.5.1.1.3.1.21 | IpAddress | read-only | The IP Netmask of this AP. Only valid for network attached APs, otherwise 0.0.0.0. |
| U32 trpzApStatApStatusMacWiredIfNumber | 1.3.6.1.4.1.14525.4.5.1.1.3.1.22 | Unsigned32 | read-only | The number of wired network interfaces (regardless of their current state) present on this AP. |
| trpzApStatRadioStatusTable | 1.3.6.1.4.1.14525.4.5.1.1.4 | not-accessible | A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Radio Base MAC in 'trpzApStatRadioStatusMacTable'. | |
| trpzApStatRadioStatusEntry | 1.3.6.1.4.1.14525.4.5.1.1.4.1 | not-accessible | Information about a particular radio on an AP attached to the AC. | |
| TRP trpzApStatRadioStatusApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.4.1.1 | TrpzApSerialNum | not-accessible | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioStatusRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.4.1.2 | TrpzRadioNum | not-accessible | The Number of this Radio on the AP. |
| MAC trpzApStatRadioStatusBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.4.1.3 | MacAddress | read-only | The Base MAC address of this radio. |
| TRP trpzApStatRadioStatusEnable | 1.3.6.1.4.1.14525.4.5.1.1.4.1.4 | TrpzRadioEnable | read-only | The configured mode (enabled/disabled) of this radio. Obsoleted by trpzApStatRadioStatusRadioMode. |
| TRP trpzApStatRadioStatusRadioConfigState | 1.3.6.1.4.1.14525.4.5.1.1.4.1.5 | TrpzRadioConfigState | read-only | The configuration state of this radio (INIT, FAIL, OK). |
| TRP trpzApStatRadioStatusCurrentPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.4.1.6 | TrpzPowerLevel | read-only | The Current Power Level of this radio. |
| TRP trpzApStatRadioStatusCurrentChannelNum | 1.3.6.1.4.1.14525.4.5.1.1.4.1.7 | TrpzChannelNum | read-only | The Current Channel Number of this radio. |
| U32 trpzApStatRadioStatusClientSessions | 1.3.6.1.4.1.14525.4.5.1.1.4.1.8 | Unsigned32 | read-only | The number of client sessions on this radio. |
| TRP trpzApStatRadioStatusMaxPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.4.1.9 | TrpzPowerLevel | read-only | The Maximum Power Level for this radio, with the current antenna, on the current channel (trpzApStatRadioStatusCurrentChannelNum), as constrained by the current regulatory domain. |
| TRP trpzApStatRadioStatusRadioPhyType | 1.3.6.1.4.1.14525.4.5.1.1.4.1.10 | TrpzRadioType | read-only | The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG). |
| TRP trpzApStatRadioStatusRadioMode | 1.3.6.1.4.1.14525.4.5.1.1.4.1.11 | TrpzRadioMode | read-only | The configured mode of this radio (enabled/disabled/sentry). Obsoletes trpzApStatRadioStatusEnable. |
| TRP trpzApStatRadioStatusRadioChannelWidth | 1.3.6.1.4.1.14525.4.5.1.1.4.1.12 | TrpzRadioChannelWidth | read-only | The configured Channel Width for this radio (20MHz/40MHz). |
| TRP trpzApStatRadioStatusRadioMimoState | 1.3.6.1.4.1.14525.4.5.1.1.4.1.13 | TrpzRadioMimoState | read-only | MIMO state of this radio (1x1/2x3/3x3). Obsoleted by trpzApStatRadioStatusRadioMimoRxChains and trpzApStatRadioStatusRadioMimoTxChains. |
| TRP trpzApStatRadioStatusMinPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.4.1.14 | TrpzPowerLevel | read-only | The Minimum Power Level for this radio, with the current antenna. |
| U32 trpzApStatRadioStatusRadioMimoRxChains | 1.3.6.1.4.1.14525.4.5.1.1.4.1.15 | Unsigned32 | read-only | The number of MIMO Transmit chains for this radio. |
| U32 trpzApStatRadioStatusRadioMimoTxChains | 1.3.6.1.4.1.14525.4.5.1.1.4.1.16 | Unsigned32 | read-only | The number of MIMO Receive chains for this radio. |
| T/F trpzApStatRadioStatusSpectralDataCollect | 1.3.6.1.4.1.14525.4.5.1.1.4.1.17 | TruthValue | read-only | Indicates whether this radio is in Spectral Data Collecting mode. |
| trpzApStatRadioStatusMacTable | 1.3.6.1.4.1.14525.4.5.1.1.5 | not-accessible | A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by AP Serial Number and Radio Number in 'trpzApStatRadioStatusTable'. | |
| trpzApStatRadioStatusMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.5.1 | not-accessible | Information about a particular radio on an AP attached to the AC. | |
| MAC trpzApStatRadioStatusMacBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.5.1.1 | MacAddress | not-accessible | The Base MAC address of this radio. |
| TRP trpzApStatRadioStatusMacApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.5.1.2 | TrpzApSerialNum | read-only | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioStatusMacRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.5.1.3 | TrpzRadioNum | read-only | The Number of this Radio on the AP. |
| TRP trpzApStatRadioStatusMacEnable | 1.3.6.1.4.1.14525.4.5.1.1.5.1.4 | TrpzRadioEnable | read-only | The configured mode (enabled/disabled) of this radio. Obsoleted by trpzApStatRadioStatusMacRadioMode. |
| TRP trpzApStatRadioStatusMacRadioConfigState | 1.3.6.1.4.1.14525.4.5.1.1.5.1.5 | TrpzRadioConfigState | read-only | The configuration state of this radio (INIT, FAIL, OK). |
| TRP trpzApStatRadioStatusMacCurrentPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.5.1.6 | TrpzPowerLevel | read-only | The Current Power Level of this radio. |
| TRP trpzApStatRadioStatusMacCurrentChannelNum | 1.3.6.1.4.1.14525.4.5.1.1.5.1.7 | TrpzChannelNum | read-only | The Current Channel Number of this radio. |
| U32 trpzApStatRadioStatusMacClientSessions | 1.3.6.1.4.1.14525.4.5.1.1.5.1.8 | Unsigned32 | read-only | The number of client sessions on this radio. |
| TRP trpzApStatRadioStatusMacMaxPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.5.1.9 | TrpzPowerLevel | read-only | The Maximum Power Level for this radio, with the current antenna, on the current channel (trpzApStatRadioStatusMacCurrentChannelNum), as constrained by the current regulatory domain. |
| TRP trpzApStatRadioStatusMacRadioPhyType | 1.3.6.1.4.1.14525.4.5.1.1.5.1.10 | TrpzRadioType | read-only | The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG). |
| TRP trpzApStatRadioStatusMacRadioMode | 1.3.6.1.4.1.14525.4.5.1.1.5.1.11 | TrpzRadioMode | read-only | The configured mode of this radio (enabled/disabled/sentry). Obsoletes trpzApStatRadioStatusMacEnable. |
| TRP trpzApStatRadioStatusMacRadioChannelWidth | 1.3.6.1.4.1.14525.4.5.1.1.5.1.12 | TrpzRadioChannelWidth | read-only | The configured Channel Width for this radio (20MHz/40MHz). |
| TRP trpzApStatRadioStatusMacRadioMimoState | 1.3.6.1.4.1.14525.4.5.1.1.5.1.13 | TrpzRadioMimoState | read-only | MIMO state of this radio (1x1/2x3/3x3). Obsoleted by trpzApStatRadioStatusMacRadioMimoRxChains and trpzApStatRadioStatusMacRadioMimoTxChains. |
| TRP trpzApStatRadioStatusMacMinPowerLevel | 1.3.6.1.4.1.14525.4.5.1.1.5.1.14 | TrpzPowerLevel | read-only | The Minimum Power Level for this radio, with the current antenna. |
| U32 trpzApStatRadioStatusMacRadioMimoRxChains | 1.3.6.1.4.1.14525.4.5.1.1.5.1.15 | Unsigned32 | read-only | The number of MIMO Transmit chains for this radio. |
| U32 trpzApStatRadioStatusMacRadioMimoTxChains | 1.3.6.1.4.1.14525.4.5.1.1.5.1.16 | Unsigned32 | read-only | The number of MIMO Receive chains for this radio. |
| T/F trpzApStatRadioStatusMacSpectralDataCollect | 1.3.6.1.4.1.14525.4.5.1.1.5.1.17 | TruthValue | read-only | Indicates whether this radio is in Spectral Data Collecting mode. |
| trpzApStatRadioServiceTable | 1.3.6.1.4.1.14525.4.5.1.1.6 | not-accessible | A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'trpzApStatRadioServiceMacTable'. | |
| trpzApStatRadioServiceEntry | 1.3.6.1.4.1.14525.4.5.1.1.6.1 | not-accessible | Information about a particular service (SSID) on a radio. | |
| TRP trpzApStatRadioServApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.6.1.1 | TrpzApSerialNum | not-accessible | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioServRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.6.1.2 | TrpzRadioNum | not-accessible | The Number of this Radio on the AP. |
| STR trpzApStatRadioServSsid | 1.3.6.1.4.1.14525.4.5.1.1.6.1.3 | DisplayString | not-accessible | The service/SSID name in use on this radio. |
| MAC trpzApStatRadioServBssid | 1.3.6.1.4.1.14525.4.5.1.1.6.1.4 | MacAddress | read-only | The MAC address (a.k.a. BSSID) of this service/SSID on this radio. |
| STR trpzApStatRadioServServiceProfileName | 1.3.6.1.4.1.14525.4.5.1.1.6.1.5 | DisplayString | read-only | The Name of the Service Profile having this SSID and associated to the (only) radio profile of this radio. |
| trpzApStatRadioServiceMacTable | 1.3.6.1.4.1.14525.4.5.1.1.7 | not-accessible | A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'trpzApStatRadioServiceTable'. | |
| trpzApStatRadioServiceMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.7.1 | not-accessible | Information about a particular service (SSID) on a radio. | |
| MAC trpzApStatRadioServMacBssid | 1.3.6.1.4.1.14525.4.5.1.1.7.1.1 | MacAddress | not-accessible | The MAC address (a.k.a. BSSID) of this service/SSID on this radio. |
| TRP trpzApStatRadioServMacApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.7.1.2 | TrpzApSerialNum | read-only | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioServMacRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.7.1.3 | TrpzRadioNum | read-only | The Number of this Radio on the AP. |
| STR trpzApStatRadioServMacSsid | 1.3.6.1.4.1.14525.4.5.1.1.7.1.4 | DisplayString | read-only | The service/SSID name in use on this radio. |
| STR trpzApStatRadioServMacServiceProfileName | 1.3.6.1.4.1.14525.4.5.1.1.7.1.5 | DisplayString | read-only | The Name of the Service Profile that configures this BSSID. |
| trpzApStatRadioServiceOpRateSetTable | 1.3.6.1.4.1.14525.4.5.1.1.8 | not-accessible | A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'trpzApStatRadioServiceOpRateSetMacTable'. | |
| trpzApStatRadioServiceOpRateSetEntry | 1.3.6.1.4.1.14525.4.5.1.1.8.1 | not-accessible | Information about a particular service (SSID) on a radio. | |
| TRP trpzApStatRadioSORSetApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.8.1.1 | TrpzApSerialNum | not-accessible | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioSORSetRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.8.1.2 | TrpzRadioNum | not-accessible | The Number of this Radio on the AP. |
| STR trpzApStatRadioSORSetSsid | 1.3.6.1.4.1.14525.4.5.1.1.8.1.3 | DisplayString | not-accessible | The service/SSID name in use on this radio. |
| TRP trpzApStatRadioSORSetMandatory | 1.3.6.1.4.1.14525.4.5.1.1.8.1.4 | TrpzRadioOpRateSetMandatory | read-only | The Mandatory Rate Set configured for this radio service. |
| TRP trpzApStatRadioSORSetDisabled | 1.3.6.1.4.1.14525.4.5.1.1.8.1.5 | TrpzRadioOpRateSetDisabled | read-only | The Disabled Rate Set configured for this radio service. |
| TRP trpzApStatRadioSORSetBeacon | 1.3.6.1.4.1.14525.4.5.1.1.8.1.6 | TrpzRadioOpRateSetSingleValue | read-only | The configured Beacon Rate for this radio service. |
| TRP trpzApStatRadioSORSetMulticast | 1.3.6.1.4.1.14525.4.5.1.1.8.1.7 | TrpzRadioOpRateSetSingleValue | read-only | The configured Multicast Rate for this radio service. |
| trpzApStatRadioServiceOpRateSetMacTable | 1.3.6.1.4.1.14525.4.5.1.1.9 | not-accessible | A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'trpzApStatRadioServiceOpRateSetTable'. | |
| trpzApStatRadioServiceOpRateSetMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.9.1 | not-accessible | Information about a particular service (SSID) on a radio. | |
| MAC trpzApStatRadioSORSetMacBssid | 1.3.6.1.4.1.14525.4.5.1.1.9.1.1 | MacAddress | not-accessible | The MAC address (a.k.a. BSSID) of this service/SSID on this radio. |
| TRP trpzApStatRadioSORSetMacMandatory | 1.3.6.1.4.1.14525.4.5.1.1.9.1.2 | TrpzRadioOpRateSetMandatory | read-only | The Mandatory Rate Set configured for this radio service. |
| TRP trpzApStatRadioSORSetMacDisabled | 1.3.6.1.4.1.14525.4.5.1.1.9.1.3 | TrpzRadioOpRateSetDisabled | read-only | The Disabled Rate Set configured for this radio service. |
| TRP trpzApStatRadioSORSetMacBeacon | 1.3.6.1.4.1.14525.4.5.1.1.9.1.4 | TrpzRadioOpRateSetSingleValue | read-only | The configured Beacon Rate for this radio service. |
| TRP trpzApStatRadioSORSetMacMulticast | 1.3.6.1.4.1.14525.4.5.1.1.9.1.5 | TrpzRadioOpRateSetSingleValue | read-only | The configured Multicast Rate for this radio service. |
| trpzApStatRadioOpStatisticsTable | 1.3.6.1.4.1.14525.4.5.1.1.10 | not-accessible | A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC in 'trpzApStatRadioOpStatisticsMacTable'. | |
| trpzApStatRadioOpStatisticsEntry | 1.3.6.1.4.1.14525.4.5.1.1.10.1 | not-accessible | Operational statistics (counters) for a particular radio. | |
| TRP trpzApStatRadioOpStatsApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.10.1.1 | TrpzApSerialNum | not-accessible | The Serial Number of the AP containing this radio. |
| TRP trpzApStatRadioOpStatsRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.10.1.2 | TrpzRadioNum | not-accessible | The Number of this Radio on the AP. |
| C64 trpzApStatRadioOpStatsTxUniPktEx | 1.3.6.1.4.1.14525.4.5.1.1.10.1.3 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioOpStatsTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.10.1.4 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioOpStatsTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.5 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioOpStatsTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.10.1.6 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioOpStatsRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.7 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioOpStatsRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.10.1.8 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioOpStatsUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.9 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioOpStatsUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.10.1.10 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioOpStatsPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.10.1.11 | Counter64 | read-only | Number of Physical Errors occurred. |
| C32 trpzApStatRadioOpStatsResetCount | 1.3.6.1.4.1.14525.4.5.1.1.10.1.12 | Counter32 | read-only | Number of reset operations for this radio. |
| C32 trpzApStatRadioOpStatsAutoTuneChannelChangeCount | 1.3.6.1.4.1.14525.4.5.1.1.10.1.13 | Counter32 | read-only | Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted. |
| C32 trpzApStatRadioOpStatsTxRetriesCount | 1.3.6.1.4.1.14525.4.5.1.1.10.1.14 | Counter32 | read-only | Number of Transmission Retries. |
| G32 trpzApStatRadioOpStatsUserSessions | 1.3.6.1.4.1.14525.4.5.1.1.10.1.15 | Gauge32 | read-only | Number of client sessions using this radio at the current moment. |
| I32 trpzApStatRadioOpStatsNoiseFloor | 1.3.6.1.4.1.14525.4.5.1.1.10.1.16 | Integer32 | read-only | Noise Floor in dBm. |
| C32 trpzApStatRadioOpStatsClientAssociations | 1.3.6.1.4.1.14525.4.5.1.1.10.1.17 | Counter32 | read-only | The total number of client association attempts on this radio (including re-association attempts). |
| C32 trpzApStatRadioOpStatsClientFailedAssociations | 1.3.6.1.4.1.14525.4.5.1.1.10.1.18 | Counter32 | read-only | The total number of failed client association attempts on this radio (including re-association attempts). |
| C32 trpzApStatRadioOpStatsClientReAssociations | 1.3.6.1.4.1.14525.4.5.1.1.10.1.19 | Counter32 | read-only | The total number of client re-association attempts. |
| C64 trpzApStatRadioOpStatsSignalingPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.20 | Counter64 | read-only | The total number of 802.11 management frames and 802.11 control frames transmitted and received by this radio. |
| C64 trpzApStatRadioOpStatsReTransmitOctet | 1.3.6.1.4.1.14525.4.5.1.1.10.1.21 | Counter64 | read-only | The total number of re-transmit octets. |
| C32 trpzApStatRadioOpStatsRefusedConnectionCount | 1.3.6.1.4.1.14525.4.5.1.1.10.1.22 | Counter32 | read-only | Number of refused connections due to not enough resources. |
| C64 trpzApStatRadioOpStatsRxDataPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.23 | Counter64 | read-only | Number of Data Packets received. |
| C64 trpzApStatRadioOpStatsRxAuthPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.24 | Counter64 | read-only | Number of Authentication Packets received. |
| C64 trpzApStatRadioOpStatsRxAssocPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.25 | Counter64 | read-only | Number of Association Packets received. |
| C64 trpzApStatRadioOpStatsTxDataPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.26 | Counter64 | read-only | Number of Data Packets transmitted. |
| C64 trpzApStatRadioOpStatsTxAuthRespPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.27 | Counter64 | read-only | Number of Authentication Response Packets transmitted. |
| C64 trpzApStatRadioOpStatsTxAssocRespPkt | 1.3.6.1.4.1.14525.4.5.1.1.10.1.28 | Counter64 | read-only | Number of Association Response Packets transmitted. |
| trpzApStatRadioOpStatisticsMacTable | 1.3.6.1.4.1.14525.4.5.1.1.11 | not-accessible | A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number and Radio Number in 'trpzApStatRadioOpStatisticsTable'. | |
| trpzApStatRadioOpStatisticsMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.11.1 | not-accessible | Operational statistics (counters) for a particular radio. | |
| MAC trpzApStatRadioOpStatsMacBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.11.1.1 | MacAddress | not-accessible | The Base MAC address of this radio. |
| C64 trpzApStatRadioOpStatsMacTxUniPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.2 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioOpStatsMacTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.11.1.3 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioOpStatsMacTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.4 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioOpStatsMacTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.11.1.5 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioOpStatsMacRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.6 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioOpStatsMacRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.11.1.7 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioOpStatsMacUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.8 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioOpStatsMacUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.11.1.9 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioOpStatsMacPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.11.1.10 | Counter64 | read-only | Number of Physical Errors occurred. |
| C32 trpzApStatRadioOpStatsMacResetCount | 1.3.6.1.4.1.14525.4.5.1.1.11.1.11 | Counter32 | read-only | Number of reset operations for this radio. |
| C32 trpzApStatRadioOpStatsMacAutoTuneChannelChangeCount | 1.3.6.1.4.1.14525.4.5.1.1.11.1.12 | Counter32 | read-only | Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted. |
| C32 trpzApStatRadioOpStatsMacTxRetriesCount | 1.3.6.1.4.1.14525.4.5.1.1.11.1.13 | Counter32 | read-only | Number of Transmission Retries. |
| G32 trpzApStatRadioOpStatsMacUserSessions | 1.3.6.1.4.1.14525.4.5.1.1.11.1.14 | Gauge32 | read-only | Number of client sessions using this radio at the current moment. |
| I32 trpzApStatRadioOpStatsMacNoiseFloor | 1.3.6.1.4.1.14525.4.5.1.1.11.1.15 | Integer32 | read-only | Noise Floor in dBm. |
| C32 trpzApStatRadioOpStatsMacClientAssociations | 1.3.6.1.4.1.14525.4.5.1.1.11.1.16 | Counter32 | read-only | The total number of client association attempts on this radio (including re-association attempts). |
| C32 trpzApStatRadioOpStatsMacClientFailedAssociations | 1.3.6.1.4.1.14525.4.5.1.1.11.1.17 | Counter32 | read-only | The total number of failed client association attempts on this radio (including re-association attempts). |
| C32 trpzApStatRadioOpStatsMacClientReAssociations | 1.3.6.1.4.1.14525.4.5.1.1.11.1.18 | Counter32 | read-only | The total number of client re-association attempts. |
| C64 trpzApStatRadioOpStatsMacSignalingPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.19 | Counter64 | read-only | The total number of 802.11 management frames and 802.11 control frames transmitted and received by this radio. |
| C64 trpzApStatRadioOpStatsMacReTransmitOctet | 1.3.6.1.4.1.14525.4.5.1.1.11.1.20 | Counter64 | read-only | The total number of re-transmit octets. |
| C32 trpzApStatRadioOpStatsMacRefusedConnectionCount | 1.3.6.1.4.1.14525.4.5.1.1.11.1.21 | Counter32 | read-only | Number of refused connections due to not enough resources. |
| C64 trpzApStatRadioOpStatsMacRxDataPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.22 | Counter64 | read-only | Number of Data Packets received. |
| C64 trpzApStatRadioOpStatsMacRxAuthPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.23 | Counter64 | read-only | Number of Authentication Packets received. |
| C64 trpzApStatRadioOpStatsMacRxAssocPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.24 | Counter64 | read-only | Number of Association Packets received. |
| C64 trpzApStatRadioOpStatsMacTxDataPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.25 | Counter64 | read-only | Number of Data Packets transmitted. |
| C64 trpzApStatRadioOpStatsMacTxAuthRespPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.26 | Counter64 | read-only | Number of Authentication Response Packets transmitted. |
| C64 trpzApStatRadioOpStatsMacTxAssocRespPkt | 1.3.6.1.4.1.14525.4.5.1.1.11.1.27 | Counter64 | read-only | Number of Association Response Packets transmitted. |
| trpzApStatRadioRateOpStatisticsTable | 1.3.6.1.4.1.14525.4.5.1.1.12 | not-accessible | A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC and Data Transmission Rate in 'trpzApStatRadioRateOpStatisticsMacTable'. | |
| trpzApStatRadioRateOpStatisticsEntry | 1.3.6.1.4.1.14525.4.5.1.1.12.1 | not-accessible | Operational statistics (counters) for a particular data transmission rate on a particular radio. | |
| TRP trpzApStatRadioRateOpStatsApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.12.1.1 | TrpzApSerialNum | not-accessible | Table index. |
| TRP trpzApStatRadioRateOpStatsRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.12.1.2 | TrpzRadioNum | not-accessible | Table index. |
| TRP trpzApStatRadioRateOpStatsRate | 1.3.6.1.4.1.14525.4.5.1.1.12.1.3 | TrpzRadioRate | not-accessible | Table index. |
| C64 trpzApStatRadioRateOpStatsTxUniPkt | 1.3.6.1.4.1.14525.4.5.1.1.12.1.4 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioRateOpStatsTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.12.1.5 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioRateOpStatsTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.12.1.6 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioRateOpStatsTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.12.1.7 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioRateOpStatsRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.12.1.8 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioRateOpStatsRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.12.1.9 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioRateOpStatsUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.12.1.10 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioRateOpStatsUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.12.1.11 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioRateOpStatsPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.12.1.12 | Counter64 | read-only | Number of Physical Errors occurred. |
| trpzApStatRadioRateOpStatisticsMacTable | 1.3.6.1.4.1.14525.4.5.1.1.13 | not-accessible | A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number, Radio Number and Data Transmission Rate in 'trpzApStatRadioRateOpStatisticsTable'. | |
| trpzApStatRadioRateOpStatisticsMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.13.1 | not-accessible | Operational statistics (counters) for a particular data transmission rate on a particular radio. | |
| MAC trpzApStatRadioRateOpStatsMacBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.13.1.1 | MacAddress | not-accessible | Table index. |
| TRP trpzApStatRadioRateOpStatsMacRate | 1.3.6.1.4.1.14525.4.5.1.1.13.1.2 | TrpzRadioRate | not-accessible | Table index. |
| C64 trpzApStatRadioRateOpStatsMacTxUniPkt | 1.3.6.1.4.1.14525.4.5.1.1.13.1.3 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioRateOpStatsMacTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.13.1.4 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioRateOpStatsMacTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.13.1.5 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioRateOpStatsMacTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.13.1.6 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioRateOpStatsMacRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.13.1.7 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioRateOpStatsMacRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.13.1.8 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioRateOpStatsMacUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.13.1.9 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioRateOpStatsMacUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.13.1.10 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioRateOpStatsMacPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.13.1.11 | Counter64 | read-only | Number of Physical Errors occurred. |
| trpzApStatRadioRateExOpStatisticsTable | 1.3.6.1.4.1.14525.4.5.1.1.14 | not-accessible | A table providing the Radio Operational Statistics per Extended Rate for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC and Extended Rate in 'trpzApStatRadioRateExOpStatisticsMacTable'. | |
| trpzApStatRadioRateExOpStatisticsEntry | 1.3.6.1.4.1.14525.4.5.1.1.14.1 | not-accessible | Operational statistics (counters) for a particular data transmission rate on a particular radio. | |
| TRP trpzApStatRadioRateExOpStatsApSerialNum | 1.3.6.1.4.1.14525.4.5.1.1.14.1.1 | TrpzApSerialNum | not-accessible | Table index. |
| TRP trpzApStatRadioRateExOpStatsRadioNum | 1.3.6.1.4.1.14525.4.5.1.1.14.1.2 | TrpzRadioNum | not-accessible | Table index. |
| TRP trpzApStatRadioRateExOpStatsRateEx | 1.3.6.1.4.1.14525.4.5.1.1.14.1.3 | TrpzRadioRateEx | not-accessible | Table index. |
| C64 trpzApStatRadioRateExOpStatsTxUniPkt | 1.3.6.1.4.1.14525.4.5.1.1.14.1.4 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioRateExOpStatsTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.14.1.5 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioRateExOpStatsTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.14.1.6 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioRateExOpStatsTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.14.1.7 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioRateExOpStatsRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.14.1.8 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioRateExOpStatsRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.14.1.9 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioRateExOpStatsUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.14.1.10 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioRateExOpStatsUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.14.1.11 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioRateExOpStatsPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.14.1.12 | Counter64 | read-only | Number of Physical Errors occurred. |
| trpzApStatRadioRateExOpStatisticsMacTable | 1.3.6.1.4.1.14525.4.5.1.1.15 | not-accessible | A table providing the Radio Operational Statistics per Extended Rate for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number, Radio Number and Extended Rate in 'trpzApStatRadioRateExOpStatisticsTable'. | |
| trpzApStatRadioRateExOpStatisticsMacEntry | 1.3.6.1.4.1.14525.4.5.1.1.15.1 | not-accessible | Operational statistics (counters) for a particular data transmission rate on a particular radio. | |
| MAC trpzApStatRadioRateExOpStatsMacBaseMac | 1.3.6.1.4.1.14525.4.5.1.1.15.1.1 | MacAddress | not-accessible | Table index. |
| TRP trpzApStatRadioRateExOpStatsMacRateEx | 1.3.6.1.4.1.14525.4.5.1.1.15.1.2 | TrpzRadioRateEx | not-accessible | Table index. |
| C64 trpzApStatRadioRateExOpStatsMacTxUniPkt | 1.3.6.1.4.1.14525.4.5.1.1.15.1.3 | Counter64 | read-only | Number of unicast packets transmitted. |
| C64 trpzApStatRadioRateExOpStatsMacTxUniOctet | 1.3.6.1.4.1.14525.4.5.1.1.15.1.4 | Counter64 | read-only | Total number of octets transmitted in unicast packets. |
| C64 trpzApStatRadioRateExOpStatsMacTxMultiPkt | 1.3.6.1.4.1.14525.4.5.1.1.15.1.5 | Counter64 | read-only | Number of multicast packets transmitted. |
| C64 trpzApStatRadioRateExOpStatsMacTxMultiOctet | 1.3.6.1.4.1.14525.4.5.1.1.15.1.6 | Counter64 | read-only | Total number of octets transmitted in multicast packets. |
| C64 trpzApStatRadioRateExOpStatsMacRxPkt | 1.3.6.1.4.1.14525.4.5.1.1.15.1.7 | Counter64 | read-only | Number of packets received. |
| C64 trpzApStatRadioRateExOpStatsMacRxOctet | 1.3.6.1.4.1.14525.4.5.1.1.15.1.8 | Counter64 | read-only | Total number of octets received. |
| C64 trpzApStatRadioRateExOpStatsMacUndcrptPkt | 1.3.6.1.4.1.14525.4.5.1.1.15.1.9 | Counter64 | read-only | Number of undecrypted packets. |
| C64 trpzApStatRadioRateExOpStatsMacUndcrptOctet | 1.3.6.1.4.1.14525.4.5.1.1.15.1.10 | Counter64 | read-only | Total number of octets in undecrypted packets. |
| C64 trpzApStatRadioRateExOpStatsMacPhyErr | 1.3.6.1.4.1.14525.4.5.1.1.15.1.11 | Counter64 | read-only | Number of Physical Errors occurred. |
| trpzApStatusConformance | 1.3.6.1.4.1.14525.4.5.1.2 | |||
| trpzApStatusCompliances | 1.3.6.1.4.1.14525.4.5.1.2.1 | |||
| trpzApStatusCompliance | 1.3.6.1.4.1.14525.4.5.1.2.1.1 | The compliance statement for devices that implement AP Status MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev2. | ||
| trpzApStatusComplianceRev2 | 1.3.6.1.4.1.14525.4.5.1.2.1.2 | The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 5.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev3. | ||
| trpzApStatusComplianceRev3 | 1.3.6.1.4.1.14525.4.5.1.2.1.3 | The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 6.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev4. | ||
| trpzApStatusComplianceRev4 | 1.3.6.1.4.1.14525.4.5.1.2.1.4 | The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 6.2 and greater of AC (wireless switch) software. | ||
| trpzApStatusComplianceRev5 | 1.3.6.1.4.1.14525.4.5.1.2.1.5 | The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 7.1 to 7.2 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev7. | ||
| trpzApStatusComplianceRev6 | 1.3.6.1.4.1.14525.4.5.1.2.1.6 | The compliance statement for devices that implement AP Status MIB. This compliance statement is for release 7.3 of AC (wireless switch) software. | ||
| trpzApStatusComplianceRev7 | 1.3.6.1.4.1.14525.4.5.1.2.1.7 | The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software. | ||
| trpzApStatusGroups | 1.3.6.1.4.1.14525.4.5.1.2.2 | |||
| trpzApStatusCommonGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.1 | Mandatory group of objects implemented to provide AP Status info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by trpzApStatusScalarsGroup, trpzApStatusApStatusTablesGroup, trpzApStatusRadioStatusTablesGroup, trpzApStatusRadioServiceTablesGroup, trpzApStatusRadioServiceOpRateSetTablesGroup, trpzApStatusRadioOpStatisticsTablesGroup, trpzApStatusRadioOpStatisticsPerRateTablesGroup. | ||
| trpzApStatusScalarsGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.2 | Group of scalar objects implemented to provide general AP info. | ||
| trpzApStatusApStatusTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.3 | Group of columnar objects implemented to provide AP Status info in releases 5.0 and 6.0. Replaced by trpzApStatusApStatusTablesGroupRev2. | ||
| trpzApStatusRadioStatusTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.4 | Group of columnar objects implemented to provide Radio Status info in releases 5.0 and 6.0. Replaced by trpzApStatusRadioStatusTablesGroupRev2. | ||
| trpzApStatusRadioServiceTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.5 | Group of columnar objects implemented to provide Radio Service info. | ||
| trpzApStatusRadioServiceOpRateSetTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.6 | Group of columnar objects implemented to provide the Operational Rate Set per Radio Service. | ||
| trpzApStatusRadioOpStatisticsTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.7 | Group of columnar objects implemented to provide Radio Operational Statistics. | ||
| trpzApStatusRadioOpStatisticsPerRateTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.8 | Group of columnar objects implemented to provide Radio Operational Statistics per data transmission Rate. | ||
| trpzApStatusApStatusVersionsGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.9 | Group of objects implemented to provide AP version info. | ||
| trpzApStatusApStatusTablesGroupRev2 | 1.3.6.1.4.1.14525.4.5.1.2.2.10 | Group of columnar objects implemented to provide AP Status info in releases 6.2 and greater. | ||
| trpzApStatusRadioStatusMaxPowerPhyTypeGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.11 | Group of columnar objects implemented to provide more Radio Status info in releases 6.0 and greater. | ||
| trpzApStatusRadioStatusTablesGroupRev2 | 1.3.6.1.4.1.14525.4.5.1.2.2.12 | Group of columnar objects implemented to provide Radio Status info in releases 6.2 and greater. | ||
| trpzApStatusRadioStatusWideMimoGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.13 | Group of columnar objects implemented to provide more Radio Status info in releases 7.0 to 7.2. Replaced by trpzApStatusRadioStatusWideMimoGroupRev2. | ||
| trpzApStatusRadioOpStatisticsPerRateExTablesGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.14 | Group of columnar objects implemented to provide Radio Operational Statistics detailed per Extended data transmission Rate (covering 802.11n MCS rates) in releases 7.1 and greater. | ||
| trpzApStatusApStatusPhysPortNumGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.15 | Group of columnar objects implemented to provide the Physical Port Number for a directly attached AP. | ||
| trpzApStatusApStatusConnectivityGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.16 | Group of columnar objects implemented to provide AP connectivity info in releases 7.1 and greater. | ||
| trpzApStatusRadioStatusAntennaGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.17 | Group of columnar objects implemented to provide Radio Status info depending on AP model and antenna being used in releases 7.1 and greater. | ||
| trpzApStatusRadioOpStatisticsClientAssocGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.18 | Group of columnar objects implemented to provide per-radio client association info in releases 7.1 and greater. | ||
| trpzApStatusRadioOpStatisticsSignErrGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.19 | Group of columnar objects implemented to provide more Radio Operational Statistics info in releases 7.1 and greater. | ||
| trpzApStatusRadioStatusWideMimoGroupRev2 | 1.3.6.1.4.1.14525.4.5.1.2.2.20 | Group of columnar objects implemented to provide more Radio Status info in releases 7.3 and greater. | ||
| trpzApStatusRadioOpStatisticsPktDetailGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.21 | Group of columnar objects implemented to provide more Radio Operational Statistics info in releases 7.5 and greater. | ||
| trpzApStatusRadioStatusSpectralDataGroup | 1.3.6.1.4.1.14525.4.5.1.2.2.22 | Group of columnar objects implemented to provide more Radio Status info in releases 7.5 and greater. |
RFC description
Trapeze Networks AP status MIB for wireless access point monitoring on Trapeze access controller switches.
Start monitoring Trapeze Networks (Juniper) thin access point / Access Controller (AP up/down operational-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.