RADLAN-MAC-BASE-PRIO

All MIBs › RADLAN-MAC-BASE-PRIO

Category: QoS and Traffic Management, Vendor: RADLAN/Cisco SB

Description: Configures MAC address-based QoS priority assignment for ingress traffic classification.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-MAC-BASE-PRIO?

RADLAN-MAC-BASE-PRIO is a RADLAN-derived (embedded switch OS used by many white-label/OEM vendors) MIB that configures MAC address-based QoS priority for ingress traffic classification. It exposes configuration data allowing administrators to force a Layer-3 CoS/priority value for traffic matching a specific MAC address and mask, via a rule table. This is a QoS configuration MIB rather than a hardware-health one; its monitoring value lies in verifying which MAC-based priority overrides are active and their row status, rather than tracking temperature, CPU, or uptime. It is a RADLAN proprietary module, commonly embedded identically across many rebranded switch vendors' firmware, without notable dependency on IETF standard QoS MIBs. It is typically deployed on RADLAN-based managed switches (used under many OEM brand names) to enforce priority handling for specific devices identified by MAC address. Engineers can download the RADLAN-MAC-BASE-PRIO file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-MAC-BASE-PRIO. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

RADLAN-based OEM managed switches (multiple rebranded vendors)

Monitoring Examples

An administrator would inspect rlMacBasePrioForceL3CosTable, keyed by rlMacBasePrioForceL3CosAddress and rlMacBasePrioForceL3CosMask, to confirm that a specific device's MAC address is correctly forced to a target CoS value, and check rlMacBasePrioForceL3CosRowStatus to verify the rule is active rather than notInService. rlMacBasePrioForceL3CosParamsTable would be checked for the associated priority parameters applied when a match occurs. This lets an operator confirm QoS policy for a given endpoint is correctly enforced.

What Can Be Monitored

MAC-based CoS override rules
forced L3 CoS value per MAC/mask
MAC priority rule row status
MAC priority feature support flag

Imported Objects

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From RADLAN-SNMPv2

RowStatus

From SNMPv2-SMI

OBJECT-TYPE

From SNMPv2-TC

MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlMacBasePrio	1.3.6.1.4.1.89.101
INT rlMacBasePrioMibVersion	1.3.6.1.4.1.89.101.1	INTEGER	read-only	Indicates the snmp support version that is supported by this device.
OCT rlMacBasePrioSupport	1.3.6.1.4.1.89.101.2	OCTET STRING	read-only	indicates which features of the max base prio are supported: (bit 0 is the most significant bit) bit 0 - ForceL3Cos bit 1 - SADA_TC
INT rlMacBasePrioForceL3CosEnable	1.3.6.1.4.1.89.101.3	INTEGER	read-write	This variable controlls the activation of ForceL3Cos feature in Mac base priority
rlMacBasePrioForceL3CosTable	1.3.6.1.4.1.89.101.4		not-accessible	A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
rlMacBasePrioForceL3CosEntry	1.3.6.1.4.1.89.101.4.1		not-accessible	Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
MAC rlMacBasePrioForceL3CosAddress	1.3.6.1.4.1.89.101.4.1.1	MacAddress	read-write	The range of address of this entry. The range may not hold MAC multicast addresses.
MAC rlMacBasePrioForceL3CosMask	1.3.6.1.4.1.89.101.4.1.2	MacAddress	read-write	Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioForceL3CosAddress field.
ROW rlMacBasePrioForceL3CosRowStatus	1.3.6.1.4.1.89.101.4.1.3	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
rlMacBasePrioForceL3CosParamsTable	1.3.6.1.4.1.89.101.5		not-accessible	The table holds the global parameters of the L3 cos :TC, UP,DSCP.
rlMacBasePrioForceL3CosParamsEntry	1.3.6.1.4.1.89.101.5.1		not-accessible
INT rlMacBasePrioForceL3CosParamsEntryIndex	1.3.6.1.4.1.89.101.5.1.1	INTEGER	read-write	Index of the ForceL3Cos parameters table.
INT rlMacBasePrioForceL3CosParamsEntryTC	1.3.6.1.4.1.89.101.5.1.2	INTEGER	read-write	The value of the globla TC
INT rlMacBasePrioForceL3CosParamsEntryUP	1.3.6.1.4.1.89.101.5.1.3	INTEGER	read-write	The value of the globla UP
INT rlMacBasePrioForceL3CosParamsEntryDSCP	1.3.6.1.4.1.89.101.5.1.4	INTEGER	read-write	The value of the globla DSCP
INT rlMacBasePrioSADATCEnable	1.3.6.1.4.1.89.101.6	INTEGER	read-write	This variable controlls the activation of SA/DA priority feature in Mac base priority
rlMacBasePrioSADATCTable	1.3.6.1.4.1.89.101.7		not-accessible	A table that contains information about ranges of addresses that are used in the mac based ptiority with the ForceL3Cos feature.
rlMacBasePrioSADATCEntry	1.3.6.1.4.1.89.101.7.1		not-accessible	Information about ranges of MAC addresses that are used in the mac based priority with the ForeL3Cos feature
MAC rlMacBasePrioSADATCAddress	1.3.6.1.4.1.89.101.7.1.1	MacAddress	read-write	The range of address of this entry. The range may not hold MAC multicast addresses.
MAC rlMacBasePrioSADATCMask	1.3.6.1.4.1.89.101.7.1.2	MacAddress	read-write	Indicate the mask to be logical-ANDed with the learned address before being compared to the value in the rlMacBasePrioSADATCAddress field.
INT rlMacBasePrioSADATCPrio	1.3.6.1.4.1.89.101.7.1.3	INTEGER	read-write	The priority that will assign to all MAC addresses that are match the range of this entry.
ROW rlMacBasePrioSADATCRowStatus	1.3.6.1.4.1.89.101.7.1.4	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.

RFC description

Manages MAC-based priority configuration and ForceL3Cos feature for QoS on Radlan devices.

Start monitoring RADLAN-based OEM managed switches, multiple rebranded vendors (MAC-based QoS priority) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-MAC-BASE-PRIO

What Is RADLAN-MAC-BASE-PRIO?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description