QOS

All MIBs › QOS

Category: QoS and Traffic Management

Description: Defines base QoS OID structure and textual conventions for quality of service policy management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is QOS?

QOS is a base, minimally-documented MIB module that defines the top-level OID structure and textual conventions used for quality-of-service policy management objects, serving as a naming/registration root rather than a full functional MIB. It belongs to the general QoS/traffic-management area and is typically referenced by other, more complete QoS MIBs that hang their priority and policy tables off this base arc. The only documented semantic is a QoS priority value convention where a higher number means higher priority, which would be used by dependent MIBs to interpret their priority-related objects consistently. Given the sparse description and empty sample object list, this module does not itself appear to expose hardware/software runtime status objects -- its role is structural/definitional, supporting whatever concrete QoS policy or queue MIB is layered on top of it. It is typically found alongside vendor-specific QoS policy-management MIBs on routers and switches implementing traffic prioritization. Engineers implementing or auditing this functionality typically reference the QOS RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in QOS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral base MIB structure, not tied to a specific manufacturer
router/switch implementing QoS policy management

Monitoring Examples

No sample_objects were provided for this module, and the module description only documents a priority-numbering convention (higher number = higher priority) rather than any runtime table or scalar. Because it appears to function as a base OID/textual-convention definition rather than a data-bearing MIB, a concrete monitoring scenario cannot be honestly constructed; any actual QoS priority values would be read from the vendor-specific MIB that imports and extends this base module.

Imported Objects

From ExaltComm

EnableStatusT
QosTagT
VlanIdT

From ExaltComProducts

radioConfig

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
advSystemConfig	1.3.6.1.4.1.25651.1.2.3.5			This is the device specific advanced configuration section.
extAirG2QoS	1.3.6.1.4.1.25651.1.2.3.5.8			QOS configuration.
QOS qosDefaultQueue	1.3.6.1.4.1.25651.1.2.3.5.8.1	QosPriorityT	read-write	The default queue to catch all traffic that don't belong to any queue.
QOS qosEth1Mode	1.3.6.1.4.1.25651.1.2.3.5.8.2	QosModeT	read-write	This setting set the qos mode or disable QoS on ETH1.
QOS qosEth2Mode	1.3.6.1.4.1.25651.1.2.3.5.8.3	QosModeT	read-write	This setting set the qos mode or disable QoS on ETH2.
qosDiffServList	1.3.6.1.4.1.25651.1.2.3.5.8.4		not-accessible	This is a table of Qos DiffServ value and proiority.
qosDiffServEntry	1.3.6.1.4.1.25651.1.2.3.5.8.4.1		not-accessible	This is DiffServ table entry.
I32 diffServValue	1.3.6.1.4.1.25651.1.2.3.5.8.4.1.1	Integer32	read-write	This is the value for the corresponding DiffServ table entry.
QOS diffServPriority	1.3.6.1.4.1.25651.1.2.3.5.8.4.1.2	QosPriorityT	read-write	This is the priority for the corresponding DiffServ table entry.
ENA diffServEnable	1.3.6.1.4.1.25651.1.2.3.5.8.4.1.3	EnableStatusT	read-write	This is the status for the corresponding DiffServ table entry.
qosPortETH1Conf	1.3.6.1.4.1.25651.1.2.3.5.8.5
qosEth1m802dot1pList	1.3.6.1.4.1.25651.1.2.3.5.8.5.1		not-accessible	This is a table of Qos 802.1p tag and proiority.
qosEth1m802dot1pEntry	1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1		not-accessible	This is a 802.1p table entry.
QOS tagEth1Priority	1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.1	QosPriorityT	read-write	This is the priority for the corresponding ETH1 802.1p tag entry.
ENA tagEth1Status	1.3.6.1.4.1.25651.1.2.3.5.8.5.1.1.2	EnableStatusT	read-write	This is the status for the corresponding ETH1 802.1p tag entry.
qosEth1PortList	1.3.6.1.4.1.25651.1.2.3.5.8.5.2		not-accessible	This is a table of Qos Port mode.
qosEth1PortEntry	1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1		not-accessible	This is a Port mode table entry.
QOS portEth1Priority	1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.1	QosPriorityT	read-write	This is the priority for the corresponding ETH1 Port mode entry.
ENA portEth1Status	1.3.6.1.4.1.25651.1.2.3.5.8.5.2.1.2	EnableStatusT	read-write	This is the status for the corresponding ETH1 Port mode entry.
qosPortETH2Conf	1.3.6.1.4.1.25651.1.2.3.5.8.6
qosEth2m802dot1pList	1.3.6.1.4.1.25651.1.2.3.5.8.6.1		not-accessible	This is a table of Qos 802.1p tag and proiority.
qosEth2m802dot1pEntry	1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1		not-accessible	This is a 802.1p table entry.
QOS tagEth2Priority	1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.1	QosPriorityT	read-write	This is the priority for the corresponding ETH2 802.1p tag entry.
ENA tagEth2Status	1.3.6.1.4.1.25651.1.2.3.5.8.6.1.1.2	EnableStatusT	read-write	This is the status for the corresponding ETH2 802.1p tag entry.
qosEth2PortList	1.3.6.1.4.1.25651.1.2.3.5.8.6.2		not-accessible	This is a table of Qos Port mode.
qosEth2PortEntry	1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1		not-accessible	This is a ETH2 Port mode table entry.
QOS portEth2Priority	1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.1	QosPriorityT	read-write	This is the priority for the corresponding ETH2 Port mode entry.
ENA portEth2Status	1.3.6.1.4.1.25651.1.2.3.5.8.6.2.1.2	EnableStatusT	read-write	This is the status for the corresponding ETH2 Port mode entry.
qosScheduler	1.3.6.1.4.1.25651.1.2.3.5.8.7			QOS Scheduler configuration.
QOS qosScheduleMode	1.3.6.1.4.1.25651.1.2.3.5.8.7.1	QosScheduleModeT	read-write	The QoS queues scheduler mode
QOS qosCos3Weight	1.3.6.1.4.1.25651.1.2.3.5.8.7.2	QosCos3WeightT	read-write	QoS queue 3 weight.
QOS qosCos2Weight	1.3.6.1.4.1.25651.1.2.3.5.8.7.3	QosCos2WeightT	read-write	QoS queue 2 weight.
QOS qosCos1Weight	1.3.6.1.4.1.25651.1.2.3.5.8.7.4	QosCos1WeightT	read-write	QoS queue 1 weight.
QOS qosCos0Weight	1.3.6.1.4.1.25651.1.2.3.5.8.7.5	QosCos0WeightT	read-write	QoS queue 0 weight.
STR commitQosSettings	1.3.6.1.4.1.25651.1.2.3.5.8.1000	DisplayString	read-write	This command allows saving or clear configuration. Options are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes.

RFC description

Exalt Communications QoS MIB for configuring quality-of-service priorities, modes, and scheduling.

Start monitoring vendor-neutral base MIB structure, router/switch implementing QoS policy management with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download QOS

What Is QOS?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description