All MIBs › TIMETRA-GSMP-MIB
Organization: Alcatel-Lucent
Last Updated: 2009-02-28
Description: TIMETRA-GSMP-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-GSMP-MIB?
TIMETRA-GSMP-MIB is an Alcatel-Lucent (Timetra/Nokia) vendor-private MIB for the SROS operating system, registered at tmnxSRObjs.39, that manages GSMP (General Switch Management Protocol) -- used in these platforms as the transport for ANCP (Access Node Control Protocol) signaling to DSL/broadband access nodes. It defines a tmnxGsmpConfigTable, indexed by svcId, that exposes tmnxGsmpCfgAdminState to enable GSMP per service, and a tmnxGsmpGroupConfigTable, indexed by svcId and tmnxGsmpGroupName, whose entries configure a GSMP neighbor group's tmnxGsmpGrpCfgAdminState, tmnxGsmpGrpCfgKeepalive and tmnxGsmpGrpCfgHoldMultiplier timers, and ANCP-specific capability flags tmnxGsmpGrpCfgAncpOamCap and tmnxGsmpGrpCfgAncpDynTopoDiscCap, with tmnxGsmpCfgLastChange/tmnxGsmpGrpCfgLastChange timestamps tracking configuration drift. Because GSMP/ANCP sessions underpin dynamic access-line topology discovery and OAM signaling between the service router and access nodes, monitoring keepalive/hold-multiplier settings and admin state is useful for diagnosing lost or flapping ANCP adjacencies to DSLAMs. It depends on TIMETRA-GLOBAL-MIB for its registration tree, TIMETRA-TC-MIB for shared textual conventions like TmnxAdminState, and TIMETRA-SERV-MIB/TIMETRA-SAP-MIB for the service and SAP identifiers it references; it is deployed on Alcatel-Lucent/Nokia SROS routers such as the 7750 SR acting as broadband network gateways, and administrators can find the TIMETRA-GSMP-MIB MIB useful when troubleshooting GSMP/ANCP adjacencies to access nodes.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-GSMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Alcatel-Lucent / Nokia SROS-based service routers (7750 SR and related Timetra-based platforms)
Monitoring Examples
An operator polls tmnxGsmpGroupConfigTable to confirm tmnxGsmpGrpCfgAdminState is inService for the GSMP group serving a set of DSLAMs, and checks tmnxGsmpGrpCfgKeepalive/HoldMultiplier against the expected session-timeout budget; a group whose tmnxGsmpGrpCfgLastChange timestamp updates unexpectedly often would indicate the GSMP/ANCP adjacency is flapping, likely due to network instability toward the access nodes.
What Can Be Monitored
- GSMP admin state per service
- GSMP group admin state and row status
- GSMP keepalive timer and hold multiplier
- ANCP OAM capability state
- ANCP dynamic topology discovery capability
- config-table last-changed timestamps
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-SAP-MIB
| sapEncapValue | OBJECT-TYPE |
| sapPortId | OBJECT-TYPE |
From TIMETRA-SERV-MIB
| custId | OBJECT-TYPE |
| custMultSvcSiteName | OBJECT-TYPE |
| svcId | OBJECT-TYPE |
From TIMETRA-SUBSCRIBER-MGMT-MIB
| tmnxSubInfoSubIdent | OBJECT-TYPE |
| tmnxSubProfileEntry | OBJECT-TYPE |
From TIMETRA-TC-MIB
| TDSCPNameOrEmpty | |
| TEgrRateModType | |
| TItemDescription | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TPIRRateOverride | |
| TPrecValueOrNone | |
| TRemarkType | |
| TmnxAdminState | |
| TmnxAncpString | |
| TmnxCustId | |
| TmnxEncapVal | |
| TmnxPortID | |
| TmnxServId |
How to Use in IPNetwork Monitor
Example using tmnxAncpSesStatRxDrop OID:
Select an Alcatel-Lucent/Nokia SROS-based service routers, e.g. 7750 SR (GSMP/ANCP neighbor-adjacency status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxAncpSesStatRxDrop into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxAncpSesStatRxDrop indicates the number of GSMP protocol messages that have been received and then dropped by the system without further processing them. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tmnxGsmpMIBModule | 1.3.6.1.4.1.6527.1.1.3.39 | This document contains the SNMP MIB module for handling GSMP (General Switch Management Protocol) for the Alcatel SROS device. Copyright 2006-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxGsmpCompliance | 1.3.6.1.4.1.6527.3.1.1.39 | |||
| tmnxGsmpCompliances | 1.3.6.1.4.1.6527.3.1.1.39.1 | |||
| tmnxGsmpV5v0MIBCompliance | 1.3.6.1.4.1.6527.3.1.1.39.1.1 | The compliance statement for GSMP objects in TIMETRA-GSMP-MIB. | ||
| tmnxGsmpGroups | 1.3.6.1.4.1.6527.3.1.1.39.2 | |||
| tmnxGsmpV5v0Group | 1.3.6.1.4.1.6527.3.1.1.39.2.1 | The group of objects supporting management of the GSMP feature on Alcatel 7x50 SR series systems. | ||
| tmnxGsmpV5v0GNotificationGroup | 1.3.6.1.4.1.6527.3.1.1.39.2.2 | The group of notifications supporting management of the GSMP feature on Alcatel 7x50 SR series systems. | ||
| tmnxGsmpNotificationObjV5v0Group | 1.3.6.1.4.1.6527.3.1.1.39.2.3 | The group of objects supporting management of GSMP notification objects on Alcatel 7x50 SR series systems. | ||
| tmnxGsmpObjects | 1.3.6.1.4.1.6527.3.1.2.39 | |||
| tmnxGsmpNotifyObjects | 1.3.6.1.4.1.6527.3.1.2.39.1 | |||
| STR tmnxNotifAncpString | 1.3.6.1.4.1.6527.3.1.2.39.1.1 | TmnxAncpString | accessible-for-notify | The value of tmnxNotifAncpString indicates the ASCII representation of the DSLAM circuit-id name for which this notification is generated. |
| TNA tmnxNotifAncpPolicyName | 1.3.6.1.4.1.6527.3.1.2.39.1.2 | TNamedItem | accessible-for-notify | The value of tmnxNotifAncpPolicyName specifies the name of the ANCP policy defined in this row. |
| U32 tmnxNotifAncpPlcyActualRate | 1.3.6.1.4.1.6527.3.1.2.39.1.3 | Unsigned32 | accessible-for-notify | The value of tmnxNotifAncpPlcyActualRate specifies the current rate |
| STR tmnxAncpRejectReason | 1.3.6.1.4.1.6527.3.1.2.39.1.4 | DisplayString | accessible-for-notify | The value of tmnxAncpRejectReason indicates the reason why the ANCP session, or ANCP-string is being rejected by the system. |
| TIM tmnxGsmpConfigTableLastChange | 1.3.6.1.4.1.6527.3.1.2.39.2 | TimeStamp | read-only | The value of tmnxGsmpConfigTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpConfigTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxGsmpConfigTable | 1.3.6.1.4.1.6527.3.1.2.39.3 | not-accessible | The table tmnxGsmpConfigTable contains a row for each service defined in the system on which GSMP can be enabled. | |
| tmnxGsmpConfigEntry | 1.3.6.1.4.1.6527.3.1.2.39.3.1 | not-accessible | Each row contains objects that allow GSMP to be configured in the scope of a service. Rows cannot be created or deleted by the user. A row will be created by the system for each service in the system on which GSMP can be enabled. | |
| TIM tmnxGsmpCfgLastChange | 1.3.6.1.4.1.6527.3.1.2.39.3.1.1 | TimeStamp | read-only | The value of tmnxGsmpCfgLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN tmnxGsmpCfgAdminState | 1.3.6.1.4.1.6527.3.1.2.39.3.1.2 | TmnxAdminState | read-write | The value of tmnxGsmpCfgAdminState specifies the administrative state of the GSMP protocol in this service. |
| TIM tmnxGsmpGroupConfigTableLastChange | 1.3.6.1.4.1.6527.3.1.2.39.4 | TimeStamp | read-only | The value of tmnxGsmpGroupConfigTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpGroupConfigTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxGsmpGroupConfigTable | 1.3.6.1.4.1.6527.3.1.2.39.5 | not-accessible | The table tmnxGsmpGroupConfigTable contains a row for each GSMP group defined in a service on which GSMP can be enabled. | |
| tmnxGsmpGroupConfigEntry | 1.3.6.1.4.1.6527.3.1.2.39.5.1 | not-accessible | Each row contains objects that allow configuration of GSMP groups in the scope of a service. A GSMP group defines a set of GSMP neighbors which have the same properties. Rows can be created, modified, and deleted by the operator. A row can only be deleted if the tmnxGsmpGrpCfgAdminState of that row is set to disabled(2). | |
| TNA tmnxGsmpGroupName | 1.3.6.1.4.1.6527.3.1.2.39.5.1.1 | TNamedItem | not-accessible | The value of tmnxGsmpGroupName specifies, together with the object svcId, the key for this row. A GSMP group name is unique only within the scope of the service in which it is defined. |
| TIM tmnxGsmpGrpCfgLastChange | 1.3.6.1.4.1.6527.3.1.2.39.5.1.2 | TimeStamp | read-only | The value of tmnxGsmpGrpCfgLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW tmnxGsmpGrpCfgRowStatus | 1.3.6.1.4.1.6527.3.1.2.39.5.1.3 | RowStatus | read-create | The value of tmnxGsmpGrpCfgRowStatus specifies the row status of this row. |
| TMN tmnxGsmpGrpCfgAdminState | 1.3.6.1.4.1.6527.3.1.2.39.5.1.4 | TmnxAdminState | read-create | The value of tmnxGsmpGrpCfgAdminState specifies the administrative state of the GSMP group. |
| U32 tmnxGsmpGrpCfgKeepalive | 1.3.6.1.4.1.6527.3.1.2.39.5.1.5 | Unsigned32 | read-create | The value of tmnxGsmpGrpCfgKeepalive specifies the GSMP keepalive timer value. |
| U32 tmnxGsmpGrpCfgHoldMultiplier | 1.3.6.1.4.1.6527.3.1.2.39.5.1.6 | Unsigned32 | read-create | The value of tmnxGsmpGrpCfgHoldMultiplier specifies the GSMP hold multiplier value. The actual hold time becomes: tmnxGsmpGrpCfgHoldMultiplier * tmnxGsmpGrpCfgKeepalive. |
| TIT tmnxGsmpGrpCfgDescription | 1.3.6.1.4.1.6527.3.1.2.39.5.1.7 | TItemDescription | read-create | The value of tmnxGsmpGrpCfgDescription specifies a user provided description string for this GSMP group. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length. |
| TMN tmnxGsmpGrpCfgAncpOamCap | 1.3.6.1.4.1.6527.3.1.2.39.5.1.8 | TmnxAdminState | read-create | The value of tmnxGsmpGrpCfgAncpOamCap specifies whether or not the GSMP Access Node Control Protocol (ANCP) OAM capability should be negotiated at startup of the GSMP connection. |
| TMN tmnxGsmpGrpCfgAncpDynTopoDiscCap | 1.3.6.1.4.1.6527.3.1.2.39.5.1.9 | TmnxAdminState | read-create | The value of tmnxGsmpGrpCfgAncpDynTopoDiscCap specifies whether or not the GSMP ANCP dynamic topology discovery capability should be negotiated at startup of the GSMP connection. |
| TIM tmnxGsmpGroupNbrTableLastChange | 1.3.6.1.4.1.6527.3.1.2.39.6 | TimeStamp | read-only | The value of tmnxGsmpGroupNbrTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpGroupNeighborTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxGsmpGroupNeighborTable | 1.3.6.1.4.1.6527.3.1.2.39.7 | not-accessible | The table tmnxGsmpGroupConfigTable contains a row for each neighbor defined in the GSMP group defined in a service on which GSMP can be enabled. | |
| tmnxGsmpGroupNeighborEntry | 1.3.6.1.4.1.6527.3.1.2.39.7.1 | not-accessible | Each row contains objects that allow configuration of a GSMP group neighbor in the scope of a service. Rows can be created, modified, and deleted by the operator. A row can only be deleted if the tmnxGsmpGrpNbrAdminState of that row is set to disabled(2). | |
| IPt tmnxGsmpGrpNbrAddressType | 1.3.6.1.4.1.6527.3.1.2.39.7.1.1 | InetAddressType | not-accessible | The value of tmnxGsmpGrpNbrAddressType specifies, together with the object tmnxGsmpGrpNbrAddress, the ip-address of the neighbor. |
| IP tmnxGsmpGrpNbrAddress | 1.3.6.1.4.1.6527.3.1.2.39.7.1.2 | InetAddress | not-accessible | The value of tmnxGsmpGrpNbrAddress specifies, together with the object tmnxGsmpGrpNbrAddressType, the ip-address of the neighbor. |
| TIM tmnxGsmpGrpNbrLastChange | 1.3.6.1.4.1.6527.3.1.2.39.7.1.3 | TimeStamp | read-only | The value of tmnxGsmpGrpNbrLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW tmnxGsmpGrpNbrRowStatus | 1.3.6.1.4.1.6527.3.1.2.39.7.1.4 | RowStatus | read-create | The value of tmnxGsmpGrpNbrRowStatus specifies the row status of this row. |
| TMN tmnxGsmpGrpNbrAdminState | 1.3.6.1.4.1.6527.3.1.2.39.7.1.5 | TmnxAdminState | read-create | The value of tmnxGsmpGrpNbrAdminState specifies the administrative state of this neighbor. |
| IPt tmnxGsmpGrpNbrLocalAddrType | 1.3.6.1.4.1.6527.3.1.2.39.7.1.6 | InetAddressType | read-create | The value of tmnxGsmpGrpNbrLocalAddrType specifies, together with the object tmnxGsmpGrpNbrLocalAddr, the source ip-address used in the connection towards the neighbor. |
| IP tmnxGsmpGrpNbrLocalAddr | 1.3.6.1.4.1.6527.3.1.2.39.7.1.7 | InetAddress | read-create | The value of tmnxGsmpGrpNbrLocalAddr specifies, together with the object tmnxGsmpGrpNbrLocalAddrType, the source ip-address used in the connection towards the neighbor. |
| TIT tmnxGsmpGrpNbrDescription | 1.3.6.1.4.1.6527.3.1.2.39.7.1.8 | TItemDescription | read-create | The value of tmnxGsmpGrpNbrDescription specifies a user provided description string for this neighbor. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length. |
| TRE tmnxGsmpGrpNbrPrioMarkType | 1.3.6.1.4.1.6527.3.1.2.39.7.1.9 | TRemarkType | read-create | The value of tmnxGsmpGrpNbrPrioMarkType specifies the priority remarking type to be used. If 'dscp' is specified the dcsp code-point to be used is specified by the object tmnxGsmpGrpNbrPrioMarkDscp. If 'prec' is specified, the precedence value to be used is specified by the object tmnxGsmpGrpNbrPrioMarkPrec. |
| TPR tmnxGsmpGrpNbrPrioMarkPrec | 1.3.6.1.4.1.6527.3.1.2.39.7.1.10 | TPrecValueOrNone | read-create | The value of tmnxGsmpGrpNbrPrioMarkPrec specifies the precedence priority marking that is to be applied if tmnxGsmpGrpNbrPrioMarkType is set to 'prec'. If the value of tmnxGsmpGrpNbrPrioMarkType is changed from 'prec' to something else, the value of tmnxGsmpGrpNbrPrioMarkPrec is set to its default value. |
| TDS tmnxGsmpGrpNbrPrioMarkDscp | 1.3.6.1.4.1.6527.3.1.2.39.7.1.11 | TDSCPNameOrEmpty | read-create | The value of tmnxGsmpGrpNbrPrioMarkDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tmnxGsmpGrpNbrPrioMarkType, is specified to be 'dscp'. If the value of tmnxGsmpGrpNbrPrioMarkType is changed from 'dscp' to something else, the value of tmnxGsmpGrpNbrPrioMarkDscp is set to its default value. |
| TIM tmnxAncpStaticMapSapTblLastChg | 1.3.6.1.4.1.6527.3.1.2.39.8 | TimeStamp | read-only | The value of tmnxAncpStaticMapSapTblLastChg indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpStaticMapSapTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxAncpStaticMapSapTable | 1.3.6.1.4.1.6527.3.1.2.39.9 | not-accessible | The table tmnxAncpStaticMapSapTable contains a row for each static ANCP entry, where the pair (ANCP-string - SAPid) is mapped onto an ANCP policy. | |
| tmnxAncpStaticMapSapEntry | 1.3.6.1.4.1.6527.3.1.2.39.9.1 | not-accessible | Each row contains a static mapping from the pair (ANCP-string - SAPid) onto an ANCP policy. Rows can be created, modified, and deleted by the operator. | |
| STR tmnxAncpStaticMapSapString | 1.3.6.1.4.1.6527.3.1.2.39.9.1.1 | TmnxAncpString | not-accessible | The value of tmnxAncpStaticMapSapString specifies, together with the SAP-id the key of this row. The value corresponds to the ASCII representation of the DSLAM circuit-id name. |
| TIM tmnxAncpStaticMapSapLastChange | 1.3.6.1.4.1.6527.3.1.2.39.9.1.2 | TimeStamp | read-only | The value of tmnxAncpStaticMapSapLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW tmnxAncpStaticMapSapRowStatus | 1.3.6.1.4.1.6527.3.1.2.39.9.1.3 | RowStatus | read-create | The value of tmnxAncpStaticMapSapRowStatus specifies the row status of this row. |
| TNA tmnxAncpStaticMapSapAncpPolName | 1.3.6.1.4.1.6527.3.1.2.39.9.1.4 | TNamedItem | read-create | The value of tmnxAncpStaticMapSapAncpPolName specifies the ANCP policy as defined in the tmnxAncpPolicyTable associated with this (ANCP-string - SAPid) pair. |
| TIM tmnxAncpStaticMapMssTblLastChg | 1.3.6.1.4.1.6527.3.1.2.39.10 | TimeStamp | read-only | The value of tmnxAncpStaticMapMssTblLastChg indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpStaticMapMssTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxAncpStaticMapMssTable | 1.3.6.1.4.1.6527.3.1.2.39.11 | not-accessible | The table tmnxAncpStaticMapMssTable contains a row for each static ANCP entry, where the pair (ANCP-string - cust-id-MSS) is mapped onto an ANCP policy. (MSS = Multi Service Site). | |
| tmnxAncpStaticMapMssEntry | 1.3.6.1.4.1.6527.3.1.2.39.11.1 | not-accessible | Each row contains a static mapping from the triplet (ANCP-string - cust-id - MSS) onto an ANCP policy. Rows can be created, modified, and deleted by the operator. | |
| STR tmnxAncpStaticMapMssString | 1.3.6.1.4.1.6527.3.1.2.39.11.1.1 | TmnxAncpString | not-accessible | The value of tmnxAncpStaticMapMssString specifies, together with the custId and the custMultSvcSiteName, the key of this row. The value corresponds to the ASCII representation of the DSLAM circuit-id name. |
| TIM tmnxAncpStaticMapMssLastChange | 1.3.6.1.4.1.6527.3.1.2.39.11.1.2 | TimeStamp | read-only | The value of tmnxAncpStaticMapMssLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW tmnxAncpStaticMapMssRowStatus | 1.3.6.1.4.1.6527.3.1.2.39.11.1.3 | RowStatus | read-create | The value of tmnxAncpStaticMapMssRowStatus specifies the row status of this row. |
| TNA tmnxAncpStaticMapMssAncpPolName | 1.3.6.1.4.1.6527.3.1.2.39.11.1.4 | TNamedItem | read-create | The value of tmnxAncpStaticMapMssAncpPolName specifies the ANCP policy as defined in the tmnxAncpPolicyTable for this row. |
| TIM tmnxAncpSubProfileTblLastChange | 1.3.6.1.4.1.6527.3.1.2.39.12 | TimeStamp | read-only | The value of tmnxAncpSubProfileTblLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpSubProfileTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxAncpSubProfileTable | 1.3.6.1.4.1.6527.3.1.2.39.13 | not-accessible | The table tmnxAncpSubProfileTable augments the table TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. More specifically this table allows the assignment of an ANCP-policy to a subscriber profile. | |
| tmnxAncpSubProfileEntry | 1.3.6.1.4.1.6527.3.1.2.39.13.1 | not-accessible | Each row allows to assign an ANCP-policy to an existing subscriber profile | |
| TNA tmnxAncpSubProfileAncpPolicy | 1.3.6.1.4.1.6527.3.1.2.39.13.1.1 | TNamedItemOrEmpty | read-create | The value of tmnxAncpSubProfileAncpPolicy specifies the ANCP policy as defined in the tmnxAncpPolicyTable for this sub profile. |
| TIM tmnxAncpPolicyTableLastChange | 1.3.6.1.4.1.6527.3.1.2.39.14 | TimeStamp | read-only | The value of tmnxAncpPolicyTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxAncpPolicyTable | 1.3.6.1.4.1.6527.3.1.2.39.15 | not-accessible | The table tmnxAncpPolicyTable allows configuration of ANCP policies. | |
| tmnxAncpPolicyEntry | 1.3.6.1.4.1.6527.3.1.2.39.15.1 | not-accessible | Each row contains a definition of an ANCP policy. Rows can be created, modified, and deleted by the operator. | |
| TNA tmnxAncpPolicyName | 1.3.6.1.4.1.6527.3.1.2.39.15.1.1 | TNamedItem | not-accessible | The value of tmnxAncpPolicyName specifies the name of the ANCP policy defined in this row. |
| TIM tmnxAncpPlcyLastChange | 1.3.6.1.4.1.6527.3.1.2.39.15.1.2 | TimeStamp | read-only | The value of tmnxAncpPlcyLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW tmnxAncpPlcyRowStatus | 1.3.6.1.4.1.6527.3.1.2.39.15.1.3 | RowStatus | read-create | The value of tmnxAncpPlcyRowStatus specifies the row status of this row. |
| U32 tmnxAncpPlcyIngRateAdjustment | 1.3.6.1.4.1.6527.3.1.2.39.15.1.4 | Unsigned32 | read-create | The value of tmnxAncpPlcyIngRateAdjustment specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyIngRateAdjustment/100 - tmnxAncpPlcyIngRateReduction. |
| U32 tmnxAncpPlcyIngRateReduction | 1.3.6.1.4.1.6527.3.1.2.39.15.1.5 | Unsigned32 | read-create | The value of tmnxAncpPlcyIngRateReduction specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyIngRateAdjustment/100 - tmnxAncpPlcyIngRateReduction. |
| U32 tmnxAncpPlcyIngRateMonitor | 1.3.6.1.4.1.6527.3.1.2.39.15.1.6 | Unsigned32 | read-create | The value of tmnxAncpPlcyIngRateMonitor specifies the rate below which the system will generate an event. If tmnxAncpPlcyIngRateMonitorNtf is true, an SNMP Notification is generated. If set to 0, no rate monitoring is active. |
| T/F tmnxAncpPlcyIngRateMonitorNtf | 1.3.6.1.4.1.6527.3.1.2.39.15.1.7 | TruthValue | read-create | The value of tmnxAncpPlcyIngRateMonitorNtf specifies whether or not an SNMP Notification is generated if a monitor event is raised. |
| INT tmnxAncpPlcyIngRateModType | 1.3.6.1.4.1.6527.3.1.2.39.15.1.8 | INTEGER | read-create | The value of tmnxAncpPlcyIngRateModType specifies the ingress-rate modification that is to be applied. If set to 'namedScheduler', then the scheduler as defined in tmnxAncpPlcyIngRateModSched is used. |
| TNA tmnxAncpPlcyIngRateModSched | 1.3.6.1.4.1.6527.3.1.2.39.15.1.9 | TNamedItemOrEmpty | read-create | The value of tmnxAncpPlcyIngRateModSched specifies the scheduler to be applied for ingress rate modification. The value is only considered if tmnxAncpPlcyIngRateModSched is set to 'namedScheduler'. |
| U32 tmnxAncpPlcyEgrRateAdjustment | 1.3.6.1.4.1.6527.3.1.2.39.15.1.10 | Unsigned32 | read-create | The value of tmnxAncpPlcyEgrRateAdjustment specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyEgrRateAdjustment/100 - tmnxAncpPlcyEgrRateReduction. |
| U32 tmnxAncpPlcyEgrRateReduction | 1.3.6.1.4.1.6527.3.1.2.39.15.1.11 | Unsigned32 | read-create | The value of tmnxAncpPlcyEgrRateReduction specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyEgrRateAdjustment/100 - tmnxAncpPlcyEgrRateReduction. |
| U32 tmnxAncpPlcyEgrRateMonitor | 1.3.6.1.4.1.6527.3.1.2.39.15.1.12 | Unsigned32 | read-create | The value of tmnxAncpPlcyEgrRateMonitor specifies the rate below which the system will generate an event. If tmnxAncpPlcyEgrRateMonitorNtf is true, an SNMP notification is generated. If set to 0, no rate monitoring is active. |
| T/F tmnxAncpPlcyEgrRateMonitorNtf | 1.3.6.1.4.1.6527.3.1.2.39.15.1.13 | TruthValue | read-create | The value of tmnxAncpPlcyEgrRateMonitorNtf specifies whether or not an SNMP Notification is generated if the monitor event is raised. |
| TEG tmnxAncpPlcyEgrRateModType | 1.3.6.1.4.1.6527.3.1.2.39.15.1.14 | TEgrRateModType | read-create | The value of tmnxAncpPlcyEgrRateModType specifies the egress-rate modification that is to be applied. If set to 'other-namedScheduler', then the scheduler as defined in tmnxAncpPlcyEgrRateModSched is used. |
| TNA tmnxAncpPlcyEgrRateModSched | 1.3.6.1.4.1.6527.3.1.2.39.15.1.15 | TNamedItemOrEmpty | read-create | The value of tmnxAncpPlcyEgrRateModSched specifies the scheduler to be applied for egress rate modification. The value is only considered if tmnxAncpPlcyEgrRateModType is set to 'namedScheduler'. |
| T/F tmnxAncpPlcyDisableShcv | 1.3.6.1.4.1.6527.3.1.2.39.15.1.16 | TruthValue | read-create | The value of tmnxAncpPlcyDisableShcv specifies whether or not the node will suspend SHCV (Subscriber Host Connectivity Verification) for the hosts defined with this ANCP policy when a port-down message is received, until the access node sends a port-up message. If tmnxAncpPlcyDisableShcvHldTime is non zero, the node will suspend SHCV for the period of time defined. If tmnxAncpPlcyDisableShcvHldTime is zero, SHCV is suspended until a port-up message is received. |
| U32 tmnxAncpPlcyDisableShcvHldTime | 1.3.6.1.4.1.6527.3.1.2.39.15.1.17 | Unsigned32 | read-create | The value of tmnxAncpPlcyDisableShcvHldTime specifies how long SHCV is suspended until the access node sends a port-up message. If tmnxAncpPlcyDisableShcvHldTime is non zero, the node will suspend SHCV for the period of time defined. If tmnxAncpPlcyDisableShcvHldTime is zero, SHCV is suspended until a port-up message is received. |
| T/F tmnxAncpPlcyDisableShcvNtf | 1.3.6.1.4.1.6527.3.1.2.39.15.1.18 | TruthValue | read-create | The value of tmnxAncpPlcyDisableShcvNtf specifies whether or not the system should generate a notification before suspending SHCV on the node. |
| tmnxAncpStringInfoTable | 1.3.6.1.4.1.6527.3.1.2.39.16 | not-accessible | The table tmnxAncpStringInfoTable contains runtime information about all ANCP-strings known to the system. | |
| tmnxAncpStringInfoEntry | 1.3.6.1.4.1.6527.3.1.2.39.16.1 | not-accessible | Each row contains information about an ANCP-string known to the system. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| STR tmnxAncpStrInfAncpString | 1.3.6.1.4.1.6527.3.1.2.39.16.1.1 | TmnxAncpString | not-accessible | The value of tmnxAncpStrInfAncpString indicates the ANCP-string for which this row entry contains information. |
| INT tmnxAncpStrInfAssociation | 1.3.6.1.4.1.6527.3.1.2.39.16.1.2 | INTEGER | read-only | The value of tmnxAncpStrInfAssociation indicates to what object the ANCP-string is associated. If set to sap(2), the associated sap can be found in tmnxAncpStrInfSapPortId and tmnxAncpStrInfSapEncapValue. If set to multiServSite (3), the associated multi-service site can be found in (tmnxAncpStrInfMultSvcSiteName tmnxAncpStrInfMultSvcSiteCust). If set to subscriberId (4), the associated subscriber-Id can be found in the object tmnxAncpStrInfSubscrIdent. If set to none (1), no association is currently known for the ANCP string. |
| TMN tmnxAncpStrInfSapPortId | 1.3.6.1.4.1.6527.3.1.2.39.16.1.3 | TmnxPortID | read-only | The value of tmnxAncpStrInfSapPortId indicates, together with the object tmnxAncpStrInfSapEncapValue the SAP-id to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to sap(2). |
| TMN tmnxAncpStrInfSapEncapValue | 1.3.6.1.4.1.6527.3.1.2.39.16.1.4 | TmnxEncapVal | read-only | The value of tmnxAncpStrInfSapEncapValue indicates, together with the object tmnxAncpStrInfSapPortId the SAP id to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to sap(2). |
| TNA tmnxAncpStrInfMultSvcSiteName | 1.3.6.1.4.1.6527.3.1.2.39.16.1.5 | TNamedItemOrEmpty | read-only | The value of tmnxAncpStrInfMultSvcSiteName indicates, together with the object tmnxAncpStrInfMultSvcSiteCust the MSS site to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to multiServSite(3). |
| TMN tmnxAncpStrInfMultSvcSiteCust | 1.3.6.1.4.1.6527.3.1.2.39.16.1.6 | TmnxCustId | read-only | The value of tmnxAncpStrInfMultSvcSiteCust indicates, together with the object tmnxAncpStrInfMultSvcSiteName the MSS site to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to multiServSite(3). |
| STR tmnxAncpStrInfSubscrIdent | 1.3.6.1.4.1.6527.3.1.2.39.16.1.7 | DisplayString | read-only | The value of tmnxAncpStrInfSubscrIdent indicates, the subscriber ID to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to subscriberId(4). |
| INT tmnxAncpStrInfLineState | 1.3.6.1.4.1.6527.3.1.2.39.16.1.8 | INTEGER | read-only | The value of tmnxAncpStrInfLineState indicates the state of the DSL line identified the ANCP-string. |
| TNA tmnxAncpStrInfAncpPolicyName | 1.3.6.1.4.1.6527.3.1.2.39.16.1.9 | TNamedItemOrEmpty | read-only | The value of tmnxAncpStrInfAncpPolicyName indicates the ANCP-policy name associated with this ANCP-string if any. |
| TPI tmnxAncpStrInfIngrRate | 1.3.6.1.4.1.6527.3.1.2.39.16.1.10 | TPIRRateOverride | read-only | The value of tmnxAncpStrInfIngrRate indicates the ingress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3). |
| TPI tmnxAncpStrInfAdjustedIngrRate | 1.3.6.1.4.1.6527.3.1.2.39.16.1.11 | TPIRRateOverride | read-only | The value of tmnxAncpStrInfAdjustedIngrRate indicates the adjusted ingress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3). |
| TPI tmnxAncpStrInfEgrRate | 1.3.6.1.4.1.6527.3.1.2.39.16.1.12 | TPIRRateOverride | read-only | The value of tmnxAncpStrInfEgrRate indicates the egress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3). |
| TPI tmnxAncpStrInfAdjustedEgrRate | 1.3.6.1.4.1.6527.3.1.2.39.16.1.13 | TPIRRateOverride | read-only | The value of tmnxAncpStrInfAdjustedEgrRate indicates the adjusted egress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3). |
| TMN tmnxAncpStrInfServId | 1.3.6.1.4.1.6527.3.1.2.39.16.1.14 | TmnxServId | read-only | The value of tmnxAncpStrInfServId indicates (if different from 0) the service in which the ANCP session is running. The 3 objects tmnxAncpStrInfServId,tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session. |
| IPt tmnxAncpStrInfNeighborAddrType | 1.3.6.1.4.1.6527.3.1.2.39.16.1.15 | InetAddressType | read-only | The value of tmnxAncpStrInfNeighborAddrType indicates the type of address contained in tmnxAncpStrInfNeighborAddr if any. |
| IP tmnxAncpStrInfNeighborAddr | 1.3.6.1.4.1.6527.3.1.2.39.16.1.16 | InetAddress | read-only | The value of tmnxAncpStrInfNeighborAddr indicates (if different from 0) the ANCP neighbor IP address. The 3 objects tmnxAncpStrInfServId,tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session. |
| U32 tmnxAncpStrInfTcpPort | 1.3.6.1.4.1.6527.3.1.2.39.16.1.17 | Unsigned32 | read-only | The value of tmnxAncpStrInfTcpPort indicates (if different from 0) the ANCP neighbor sessions TCP port number. The 3 objects tmnxAncpStrInfServId, tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session. |
| TNA tmnxAncpStrInfGroupName | 1.3.6.1.4.1.6527.3.1.2.39.16.1.18 | TNamedItemOrEmpty | read-only | The value of tmnxAncpStrInfGroupName indicates the GSMP group in which the neighbor is defined. This value is configurable using the object: tmnxGsmpGroupName. |
| tmnxAncpSessionTable | 1.3.6.1.4.1.6527.3.1.2.39.17 | not-accessible | The table tmnxAncpSessionTable contains runtime information about all ANCP sessions known to the system. | |
| tmnxAncpSessionEntry | 1.3.6.1.4.1.6527.3.1.2.39.17.1 | not-accessible | Each row contains information about an ANCP session known to the system. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TMN tmnxAncpSesServiceId | 1.3.6.1.4.1.6527.3.1.2.39.17.1.1 | TmnxServId | not-accessible | The value of tmnxAncpSesServiceId indicates the service-id of the service in which this ANCP session is running. |
| IPt tmnxAncpSesNbrAddressType | 1.3.6.1.4.1.6527.3.1.2.39.17.1.2 | InetAddressType | not-accessible | The value of tmnxAncpSesNbrAddressType indicates the address type of the address contained in tmnxAncpSesNbrAddress. |
| IP tmnxAncpSesNbrAddress | 1.3.6.1.4.1.6527.3.1.2.39.17.1.3 | InetAddress | not-accessible | The value of tmnxAncpSesNbrAddress indicates the IP address of the neighbor in this ANCP session. |
| U32 tmnxAncpSesNbrTcpPort | 1.3.6.1.4.1.6527.3.1.2.39.17.1.4 | Unsigned32 | not-accessible | The value of tmnxAncpSesNbrTcpPort indicates the neighbor TCP port number use for this ANCP session. |
| U32 tmnxAncpSesNbrPeerInstance | 1.3.6.1.4.1.6527.3.1.2.39.17.1.5 | Unsigned32 | read-only | The value of tmnxAncpSesNbrPeerInstance indicates the sender-instance value received from the ANCP session neighbor. |
| U32 tmnxAncpSesNbrPeerPort | 1.3.6.1.4.1.6527.3.1.2.39.17.1.6 | Unsigned32 | read-only | The value of tmnxAncpSesNbrPeerPort indicates the sender-port value received from the ANCP session neighbor. |
| OCT tmnxAncpSesNbrPeerName | 1.3.6.1.4.1.6527.3.1.2.39.17.1.7 | OCTET STRING | read-only | The value of tmnxAncpSesNbrPeerName indicates the sender-name value received from the ANCP session neighbor. |
| U32 tmnxAncpSesSenderInstance | 1.3.6.1.4.1.6527.3.1.2.39.17.1.8 | Unsigned32 | read-only | The value of tmnxAncpSesSenderInstance indicates the sender-instance value sent to the ANCP neighbor in this ANCP session. |
| U32 tmnxAncpSesSenderPort | 1.3.6.1.4.1.6527.3.1.2.39.17.1.9 | Unsigned32 | read-only | The value of tmnxAncpSesSenderPort indicates the sender-port value sent to the ANCP neighbor in this ANCP session. |
| OCT tmnxAncpSesSenderName | 1.3.6.1.4.1.6527.3.1.2.39.17.1.10 | OCTET STRING | read-only | The value of tmnxAncpSesSenderName indicates the sender-name value sent to the ANCP neighbor in this ANCP session. |
| U32 tmnxAncpSesNbrTimeouts | 1.3.6.1.4.1.6527.3.1.2.39.17.1.11 | Unsigned32 | read-only | The value of tmnxAncpSesNbrTimeouts indicates how many times the system has timed out while waiting for an ACK from the neighbor. Each time an answer is received from the neighbor the value is reset to 0. |
| U32 tmnxAncpSesNbrMaxNbrOfTimeouts | 1.3.6.1.4.1.6527.3.1.2.39.17.1.12 | Unsigned32 | read-only | The value of tmnxAncpSesNbrMaxNbrOfTimeouts indicates the max number of timeouts the system will allow before the ANCP session is closed. The current number of timeouts is stored in tmnxAncpSesNbrTimeouts. The tmnxAncpSesNbrMaxNbrOfTimeouts is configurable by modifying the object tmnxGsmpGrpCfgHoldMultiplier. |
| U32 tmnxAncpSesNbrTimer | 1.3.6.1.4.1.6527.3.1.2.39.17.1.13 | Unsigned32 | read-only | The value of tmnxAncpSesNbrTimer indicates the timeout value used by the system when waiting for an ACK from the ANCP neighbor. The value of tmnxAncpSesNbrTimer is received from the ANCP neighbor. |
| U32 tmnxAncpSesSenderTimer | 1.3.6.1.4.1.6527.3.1.2.39.17.1.14 | Unsigned32 | read-only | The value of tmnxAncpSesSenderTimer indicates the timeout value that will be announced towards the ANCP neighbor. The ANCP neighbor will use this timeout value while waiting for a ACK from this system. The tmnxAncpSesNbrTimer is configurable by modifying the object tmnxGsmpGrpCfgKeepalive. |
| BIT tmnxAncpSesNegotiatedCaps | 1.3.6.1.4.1.6527.3.1.2.39.17.1.15 | Bits | read-only | The value of tmnxAncpSesNegotiatedCaps indicates which capabilities are successfully negotiated in the ANCP session. |
| BIT tmnxAncpSesConfiguredCaps | 1.3.6.1.4.1.6527.3.1.2.39.17.1.16 | Bits | read-only | The value of tmnxAncpSesConfiguredCaps indicates which capabilities were requested when the session was first established. |
| TNA tmnxAncpSesGroupName | 1.3.6.1.4.1.6527.3.1.2.39.17.1.17 | TNamedItem | read-only | The value of tmnxAncpSesGroupName indicates the GSMP group in which the neighbor is defined. This value is configurable using the object: tmnxGsmpGroupName. |
| INT tmnxAncpSesState | 1.3.6.1.4.1.6527.3.1.2.39.17.1.18 | INTEGER | read-only | The value of tmnxAncpSesState indicates the state this gsmp session is in. |
| IPt tmnxAncpSesLocalAddrType | 1.3.6.1.4.1.6527.3.1.2.39.17.1.19 | InetAddressType | read-only | The value of tmnxAncpSesLocalAddrType indicates the address type of the address contained in tmnxAncpSesLocalAddr. |
| IP tmnxAncpSesLocalAddr | 1.3.6.1.4.1.6527.3.1.2.39.17.1.20 | InetAddress | read-only | The value of tmnxAncpSesLocalAddr indicates the INET address that was used by the neighbor to identify the endpoint of the ANCP session he wants to establish. |
| tmnxAncpSessionStatsTable | 1.3.6.1.4.1.6527.3.1.2.39.18 | not-accessible | The table tmnxAncpSessionStatsTable contains statistic information for every ANCP session known to the system. | |
| tmnxAncpSessionStatsEntry | 1.3.6.1.4.1.6527.3.1.2.39.18.1 | not-accessible | Each row contains statistics information about an ANCP session known to the system. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TIM tmnxAncpSesStatLastChanged | 1.3.6.1.4.1.6527.3.1.2.39.18.1.1 | TimeStamp | read-only | The value of tmnxAncpSesStatLastChanged indicates the sysUpTime of the last time the counters in this row where reset (to zero). If no counter resets have occurred since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| C32 tmnxAncpSesStatRxDropEx | 1.3.6.1.4.1.6527.3.1.2.39.18.1.2 | Counter32 | read-only | The value of tmnxAncpSesStatRxDrop indicates the number of GSMP protocol messages that have been received and then dropped by the system without further processing them. |
| C32 tmnxAncpSesStatTxDrop | 1.3.6.1.4.1.6527.3.1.2.39.18.1.3 | Counter32 | read-only | The value of tmnxAncpSesStatTxDrop indicates the number of GSMP protocol messages that were created by the system in order for them to be sent to the ACNP neighbor, but were never transmitted. |
| C32 tmnxAncpSesStatRxSyn | 1.3.6.1.4.1.6527.3.1.2.39.18.1.4 | Counter32 | read-only | The value of tmnxAncpSesStatRxSyn indicates the number of GSMP SYN messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxSyn | 1.3.6.1.4.1.6527.3.1.2.39.18.1.5 | Counter32 | read-only | The value of tmnxAncpSesStatTxSyn indicates the number of GSMP SYN messages that were transmitted to the ANCP neighbor in this ANCP session. |
| C32 tmnxAncpSesStatRxSynAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.6 | Counter32 | read-only | The value of tmnxAncpSesStatRxSynAck indicates the number of GSMP SYN ACK messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxSynAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.7 | Counter32 | read-only | The value of tmnxAncpSesStatTxSynAck indicates the number of GSMP SYN ACK messages that were transmitted to the ANCP neighbor in this ANCP session. |
| C32 tmnxAncpSesStatRxAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.8 | Counter32 | read-only | The value of tmnxAncpSesStatRxAck indicates the number of GSMP ACK messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.9 | Counter32 | read-only | The value of tmnxAncpSesStatTxAck indicates the number of GSMP ACK messages that were transmitted to the ANCP neighbor in this ANCP session. |
| C32 tmnxAncpSesStatRxRstAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.10 | Counter32 | read-only | The value of tmnxAncpSesStatRxRstAck indicates the number of GSMP RST ACK messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxRstAck | 1.3.6.1.4.1.6527.3.1.2.39.18.1.11 | Counter32 | read-only | The value of tmnxAncpSesStatTxRstAck indicates the number of GSMP RST ACK messages that were transmitted to the ANCP neighbor in this session. |
| C32 tmnxAncpSesStatRxPortUp | 1.3.6.1.4.1.6527.3.1.2.39.18.1.12 | Counter32 | read-only | The value of tmnxAncpSesStatRxPortUp indicates the number of GSMP 'PortUp' messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxPortUp | 1.3.6.1.4.1.6527.3.1.2.39.18.1.13 | Counter32 | read-only | The value of tmnxAncpSesStatTxPortUp indicates the number of GSMP 'PortUp' messages that were transmitted to the ANCP neighbor in this session. |
| C32 tmnxAncpSesStatRxPortDown | 1.3.6.1.4.1.6527.3.1.2.39.18.1.14 | Counter32 | read-only | The value of tmnxAncpSesStatRxPortDown indicates the number of GSMP 'PortDown' messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxPortDown | 1.3.6.1.4.1.6527.3.1.2.39.18.1.15 | Counter32 | read-only | The value of tmnxAncpSesStatTxPortDown indicates the number of GSMP 'PortDown' messages that were transmitted to the ANCP neighbor in this session. |
| C32 tmnxAncpSesStatRxLoopback | 1.3.6.1.4.1.6527.3.1.2.39.18.1.16 | Counter32 | read-only | The value of tmnxAncpSesStatRxLoopback indicates the number of GSMP Loopback messages received in this ANCP session. |
| C32 tmnxAncpSesStatTxLoopback | 1.3.6.1.4.1.6527.3.1.2.39.18.1.17 | Counter32 | read-only | The value of tmnxAncpSesStatTxLoopback indicates the number of GSMP Loopback messages that were transmitted to the ANCP neighbor in this ANCP session. |
| tmnxAncpSapMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.19 | not-accessible | The table tmnxAncpSapMonitorTable contains ANCP information for every SAP that maps on an known ANCP string. | |
| tmnxAncpSapMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.19.1 | not-accessible | Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TPI tmnxAncpSapMntrEgrAggRateLimit | 1.3.6.1.4.1.6527.3.1.2.39.19.1.1 | TPIRRateOverride | read-only | The value of tmnxAncpSapMntrEgrAggRateLimit indicates the Qos Scheduler aggregate rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. |
| STR tmnxAncpSapMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.19.1.2 | TmnxAncpString | read-only | The value of tmnxAncpSapMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the aggregate rate limit as described in tmnxAncpSapMntrEgrAggRateLimit. |
| tmnxAncpSapIngSchedMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.20 | not-accessible | The table tmnxAncpSapIngSchedMonitorTable contains ANCP ingress information for every SAP that maps on an known ANCP string. | |
| tmnxAncpSapIngSchedMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.20.1 | not-accessible | Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TNA tmnxAncpSapIngMntrQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.20.1.1 | TNamedItem | not-accessible | The value of tmnxAncpSapIngMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this SAP. |
| TPI tmnxAncpSapIngMntrQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.20.1.2 | TPIRRateOverride | read-only | The value of tmnxAncpSapIngMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| STR tmnxAncpSapIngMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.20.1.3 | TmnxAncpString | read-only | The value of tmnxAncpSapIngMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpSapIngMntrQosShedPIR. |
| tmnxAncpSapEgrSchedMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.21 | not-accessible | The table tmnxAncpSapEgrSchedMonitorTable contains ANCP ingress information for every SAP that maps on an known ANCP string. | |
| tmnxAncpSapEgrSchedMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.21.1 | not-accessible | Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TNA tmnxAncpSapEgrMntrQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.21.1.1 | TNamedItem | not-accessible | The value of tmnxAncpSapEgrMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this SAP. |
| TPI tmnxAncpSapEgrMntrQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.21.1.2 | TPIRRateOverride | read-only | The value of tmnxAncpSapEgrMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| STR tmnxAncpSapEgrMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.21.1.3 | TmnxAncpString | read-only | The value of tmnxAncpSapEgrMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpSapEgrMntrQosShedPIR. |
| tmnxAncpMssMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.22 | not-accessible | The table tmnxAncpMssMonitorTable contains ANCP information for every MSS that maps on an known ANCP string. | |
| tmnxAncpMssMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.22.1 | not-accessible | Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TPI tmnxAncpMssMntrEgrAggRateLimit | 1.3.6.1.4.1.6527.3.1.2.39.22.1.1 | TPIRRateOverride | read-only | The value of tmnxAncpMssMntrEgrAggRateLimit indicates the Qos Scheduler rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. |
| STR tmnxAncpMssMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.22.1.2 | TmnxAncpString | read-only | The value of tmnxAncpMssMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the Scheduler rate limit as described in tmnxAncpMssMntrEgrAggRateLimit. |
| tmnxAncpMssIngMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.23 | not-accessible | The table tmnxAncpMssIngMonitorTable contains ingress ANCP information for every MSS that maps on an known ANCP string. | |
| tmnxAncpMssIngMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.23.1 | not-accessible | Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TNA tmnxAncpMssIngMntrQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.23.1.1 | TNamedItem | not-accessible | The value of tmnxAncpMssIngMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this MSS. |
| TPI tmnxAncpMssIngMntrQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.23.1.2 | TPIRRateOverride | read-only | The value of tmnxAncpMssIngMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| STR tmnxAncpMssIngMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.23.1.3 | TmnxAncpString | read-only | The value of tmnxAncpMssIngMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpMssIngMntrQosShedPIR. |
| tmnxAncpMssEgrMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.24 | not-accessible | The table tmnxAncpMssEgrMonitorTable contains ingress ANCP information for every MSS that maps on an known ANCP string. | |
| tmnxAncpMssEgrMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.24.1 | not-accessible | Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TNA tmnxAncpMssEgrMntrQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.24.1.1 | TNamedItem | not-accessible | The value of tmnxAncpMssEgrMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this MSS. |
| TPI tmnxAncpMssEgrMntrQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.24.1.2 | TPIRRateOverride | read-only | The value of tmnxAncpMssEgrMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| STR tmnxAncpMssEgrMntrAncpString | 1.3.6.1.4.1.6527.3.1.2.39.24.1.3 | TmnxAncpString | read-only | The value of tmnxAncpMssEgrMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpMssEgrMntrQosShedPIR. |
| tmnxAncpSubMonitorTable | 1.3.6.1.4.1.6527.3.1.2.39.25 | not-accessible | The table tmnxAncpSubMonitorTable contains ANCP information for every subscriber that maps on an known ANCP string. | |
| tmnxAncpSubMonitorEntry | 1.3.6.1.4.1.6527.3.1.2.39.25.1 | not-accessible | Each row contains statistics information about ANCP for every subscriber that maps on an known ANCP string. Rows are created/deleted automatically be the system. The table contains read-only information only. | |
| TNA tmnxAncpSubMntrIngQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.25.1.1 | TNamedItem | read-only | The value of tmnxAncpSubMntrIngQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this subscriber. |
| TPI tmnxAncpSubMntrIngQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.25.1.2 | TPIRRateOverride | read-only | The value of tmnxAncpSubMntrIngQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| TNA tmnxAncpSubMntrEgrQosShedName | 1.3.6.1.4.1.6527.3.1.2.39.25.1.3 | TNamedItem | read-only | The value of tmnxAncpSubMntrEgrQosShedName indicates the egress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this subscriber. |
| TPI tmnxAncpSubMntrEgrQosShedPIR | 1.3.6.1.4.1.6527.3.1.2.39.25.1.4 | TPIRRateOverride | read-only | The value of tmnxAncpSubMntrEgrQosShedPIR indicates the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. |
| TPI tmnxAncpSubMntrEgrAggRateLimit | 1.3.6.1.4.1.6527.3.1.2.39.25.1.5 | TPIRRateOverride | read-only | The value of tmnxAncpSubMntrEgrAggRateLimit indicates the Qos Scheduler rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. |
| tmnxGsmpNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.39 | |||
| tmnxGsmpNotifications | 1.3.6.1.4.1.6527.3.1.3.39.0 | |||
| NTF tmnxAncpIngRateMonitorEvent | 1.3.6.1.4.1.6527.3.1.3.39.0.1 | This Notification is sent whenever the ingress rate monitor function for the port identified by tmnxNotifAncpString detects that the scheduler rate has dropped below tmnxAncpPlcyIngRateMonitor. | ||
| NTF tmnxAncpEgrRateMonitorEvent | 1.3.6.1.4.1.6527.3.1.3.39.0.2 | This Notification is sent whenever the egress rate monitor function for the port identified by tmnxNotifAncpString detects that the scheduler rate has dropped below tmnxAncpPlcyEgrRateMonitor. | ||
| NTF tmnxAncpShcvDisabledEvent | 1.3.6.1.4.1.6527.3.1.3.39.0.3 | This Notification is sent whenever the shcv (subscriber host connectivity verification) is disabled for all hosts of the subscriber associated with the tmnxNotifAncpString when a port-down event was received for the tmnxNotifAncpString. | ||
| NTF tmnxAncpSesRejected | 1.3.6.1.4.1.6527.3.1.3.39.0.4 | The tmnxAncpSesRejected notification is sent when an incoming ANCP session is rejected by the system. Details on why this happened are specified in tmnxAncpRejectReason. | ||
| NTF tmnxAncpStringRejected | 1.3.6.1.4.1.6527.3.1.3.39.0.5 | The tmnxAncpStringRejected notification is sent when an incoming ANCP string received on an established ANCP session is rejected by the system. Details on why this happened are specified in tmnxAncpRejectReason. |
RFC description
Nokia/Timetra vendor-private MIB for managing GSMP (Generic Stream Encapsulation Protocol) tunnels and parameters.
Start monitoring Alcatel-Lucent/Nokia SROS-based service routers, e.g. 7750 SR (GSMP/ANCP neighbor-adjacency status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.