NCR-CORESST-MIB

All MIBs › NCR-CORESST-MIB

Description: NCR-CORESST-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NCR-CORESST-MIB?

NCR-CORESST-MIB is a vendor-specific MIB from NCR that models the Core SST (System Status and Telemetry) subsystem used across NCR self-service/retail terminal platforms, matching the hint's description of device health, verification states, and component service status. It exposes sstManagementProtocolTable for agent/protocol identification, sstComponentStateTable reporting per-module operational state (sstComponentStateDescrip, sstComponentStateCategory, sstComponentStateCode) using the VerificationState and SSTState textual conventions (healthy, attentionSoon, attentionNow, notConfigured), sstServiceStateTable for in-service/out-of-service status via the SSTService convention, sstTransStateTable for transaction-processing state, and sstDeviceLogTable for historical device event logging, plus sstAgentFilterTable for controlling which agent events are reported. It depends on RFC1155-SMI/RFC-1212/RFC1213-MIB/RFC1253-MIB conventions for basic types (Counter, DisplayString, TruthValue) rather than SNMPv2 constructs. It is deployed on NCR self-service terminals, ATMs, and point-of-sale/retail hardware running the Core SST agent for centralized device diagnostics and alarm management, and administrators can download the NCR-CORESST-MIB file to load it into their MIB browser when building terminal-health dashboards.

IPNetwork Monitor allows you to monitor SNMP objects defined in NCR-CORESST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NCR self-service terminals (ATM/retail/POS hardware running Core SST agent)

Monitoring Examples

An operator polls sstComponentStateTable to check sstComponentStateCategory for a card reader or receipt printer module and cross-references sstServiceStateTable's SSTService value; a component reporting SSTState 'attentionNow' alongside an 'outService' entry in sstServiceStateTable would indicate that peripheral has failed and taken itself offline, requiring field service.

What Can Be Monitored

per-component operational/verification state
in-service/out-of-service status per module
transaction-processing state
device event/history log entries
management protocol/agent identification
agent event filtering configuration

Imported Objects

From NCR-CORESST-MIB

sstLogs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

From RFC1253-MIB

TruthValue

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ncr	1.3.6.1.4.1.191
sst	1.3.6.1.4.1.191.39
sstCore	1.3.6.1.4.1.191.39.1
sstManagementProtocolTable	1.3.6.1.4.1.191.39.1.1		not-accessible	This table defines the attributes of the management protocol used for the agent.
sstManagementProtocolEntry	1.3.6.1.4.1.191.39.1.1.1		not-accessible
INT sstManagementProtocolIndex	1.3.6.1.4.1.191.39.1.1.1.1	INTEGER	read-only	This is a unique number for every entry in the management protocol table.
STR sstManagementProtocolType	1.3.6.1.4.1.191.39.1.1.1.2	DisplayString	read-only	The management protocol, which identifies the type of SST and the type of agent running on the SST.
sstComponentStateTable	1.3.6.1.4.1.191.39.1.2		not-accessible	This table defines all the information about state changes in device modules.
sstComponentStateEntry	1.3.6.1.4.1.191.39.1.2.1		not-accessible	This defines the contents of the table.
INT sstComponentStateIndex	1.3.6.1.4.1.191.39.1.2.1.1	INTEGER	read-only	A unique number for every entry in the component state table.
STR sstComponentStateDescrip	1.3.6.1.4.1.191.39.1.2.1.2	DisplayString	read-only	A description of the operational state of the module.
STR sstComponentStateCategory	1.3.6.1.4.1.191.39.1.2.1.3	DisplayString	read-only	This indicates the current summary state of the module.
STR sstComponentStateCode	1.3.6.1.4.1.191.39.1.2.1.4	DisplayString	read-only	The platform-defined status code of the operational state of the module.
STR sstComponentStateDateTimeEvt	1.3.6.1.4.1.191.39.1.2.1.5	DisplayString	read-only	The date, in DD/MM/YYYY format, and the time, in HH:MM:SS format, when the event occurred on the SST.
STR sstComponentStateDateTimeProx	1.3.6.1.4.1.191.39.1.2.1.6	DisplayString	read-only	The date, in DD/MM/YYYY format, and the time, in HH:MM:SS format, when the event was processed by a proxy. This can be NULL if not processed by a proxy.
STR sstComponentStateDevice	1.3.6.1.4.1.191.39.1.2.1.7	DisplayString	read-only	The short description of the device and the name of the module affected by the event.
STR sstComponentStateData	1.3.6.1.4.1.191.39.1.2.1.8	DisplayString	read-only	Any additional information if available, otherwise NULL.
INT sstComponentStateSubIndex	1.3.6.1.4.1.191.39.1.2.1.9	INTEGER	read-only	The index entry of the first service in the services table associated with the device.
sstServiceStateTable	1.3.6.1.4.1.191.39.1.4		not-accessible	This table defines all the information about state changes in device services (indicating service availability).
sstServiceStateEntry	1.3.6.1.4.1.191.39.1.4.1		not-accessible	This defines the contents of the table.
INT sstServiceStateIndex	1.3.6.1.4.1.191.39.1.4.1.1	INTEGER	read-only	A unique number for every entry in the service state table.
STR sstServiceStateStates	1.3.6.1.4.1.191.39.1.4.1.2	DisplayString	read-only	The current state of each part of the service.
STR sstServiceStateInfo	1.3.6.1.4.1.191.39.1.4.1.3	DisplayString	read-only	The maintenance information associated with the last state change in the service: M-Code, M-Status, M-Data.
STR sstServiceStateDateTimeEvt	1.3.6.1.4.1.191.39.1.4.1.4	DisplayString	read-only	The date, in DD/MM/YYYY format, and the time, in HH:MM:SS format, of the last state change in the service.
STR sstServiceStateDateTimeProx	1.3.6.1.4.1.191.39.1.4.1.5	DisplayString	read-only	The date, in DD/MM/YYYY format, and the time, in HH:MM:SS format, when the event was processed by a proxy. This can be NULL if not processed by a proxy.
STR sstServiceStateService	1.3.6.1.4.1.191.39.1.4.1.6	DisplayString	read-only	The name of the service affected by the state change.
STR sstServiceStateAdditionalData	1.3.6.1.4.1.191.39.1.4.1.7	DisplayString	read-only	The replenishment status data associated with the last state change in the service: RS-Data.
sstProduct	1.3.6.1.4.1.191.39.13
sstObjs	1.3.6.1.4.1.191.39.13.2
sstGeneral	1.3.6.1.4.1.191.39.13.2.1
STR sstManufacturer	1.3.6.1.4.1.191.39.13.2.1.1	DisplayString	read-only	The name of the manufacturer of the product.
STR sstProductName	1.3.6.1.4.1.191.39.13.2.1.2	DisplayString	read-write	The SST model.
STR sstVersion	1.3.6.1.4.1.191.39.13.2.1.3	DisplayString	read-only	The version of the NCR platform running on the SST.
STR sstSerialNo	1.3.6.1.4.1.191.39.13.2.1.4	DisplayString	read-write	The serial number of the SST.
STR sstInstallation	1.3.6.1.4.1.191.39.13.2.1.5	DisplayString	read-only	The date and time, in DMI-defined format, when the component was (last) installed.
VER sstVerify	1.3.6.1.4.1.191.39.13.2.1.6	VerificationState	read-only	A level of verification that the DMI component is installed and functioning. This attribute is not currently supported.
SST sstService	1.3.6.1.4.1.191.39.13.2.1.7	SSTService	read-write	This indicates the current availability of the transaction application. Set this value to causes the agent to attempt to put the SST in or out of service.
SST sstReset	1.3.6.1.4.1.191.39.13.2.1.8	SSTReset	read-write	A signal to the SST to shut down and reset. Get this value to see whether a reset is pending. Set this value to cause the agent to reset the SST within 300 seconds, or cancel the reset.
sstTotalTable	1.3.6.1.4.1.191.39.13.2.1.9		not-accessible	This group defines the attributes of the initial (source) replenishment count and the cumulative (destination) count of the movement of transaction media such as cards, envelopes and currency notes.
sstTotalEntry	1.3.6.1.4.1.191.39.13.2.1.9.1		not-accessible	This defines the contents of the table.
STR sstCountName	1.3.6.1.4.1.191.39.13.2.1.9.1.1	DisplayString	read-only	The name of the service with which the counter is associated.
INT sstCountIndex	1.3.6.1.4.1.191.39.13.2.1.9.1.2	INTEGER	read-only	A unique number for each of the counters maintained by sstCountName.
INT sstCountSource	1.3.6.1.4.1.191.39.13.2.1.9.1.3	INTEGER	read-write	The initial value set when the media container is filled (for example, a currency cassette) or emptied (for example, a purge bin).
INT sstCountDestination	1.3.6.1.4.1.191.39.13.2.1.9.1.4	INTEGER	read-write	The cumulative count of the media movements. This is used with the initial value to calculate the current quantity of media available in the container, for example, the number of envelopes left in the envelope dispenser.
SST sstAggregateModuleState	1.3.6.1.4.1.191.39.13.2.1.10	SSTState	read-only	This is the overall summary state of all modules. This holds the most serious summary state which currently exists on any SST module.
sstDevice	1.3.6.1.4.1.191.39.13.2.2
sstApplic	1.3.6.1.4.1.191.39.13.2.3
sstTrans	1.3.6.1.4.1.191.39.13.2.3.1
STR sstTransManufacturer	1.3.6.1.4.1.191.39.13.2.3.1.1	DisplayString	read-only	The name of the manufacturer of the product.
STR sstTransProduct	1.3.6.1.4.1.191.39.13.2.3.1.2	DisplayString	read-only
STR sstTransVersion	1.3.6.1.4.1.191.39.13.2.3.1.3	DisplayString	read-only	This attribute does not apply to SST transaction application information.
STR sstTransSerialNo	1.3.6.1.4.1.191.39.13.2.3.1.4	DisplayString	read-only	This attribute does not apply to SST transaction application information.
STR sstTransInstallation	1.3.6.1.4.1.191.39.13.2.3.1.5	DisplayString	read-only	The date and time, in DMI-defined format, when the component was (last) installed.
VER sstTransVerify	1.3.6.1.4.1.191.39.13.2.3.1.6	VerificationState	read-only	A level of verification that the DMI component is installed and functioning. This attribute is not currently supported.
sstTransStateTable	1.3.6.1.4.1.191.39.13.2.3.1.7		not-accessible	This table contains information about state changes in the transaction application.
sstTransStateEntry	1.3.6.1.4.1.191.39.13.2.3.1.7.1		not-accessible	Table Description.
STR sstTransName	1.3.6.1.4.1.191.39.13.2.3.1.7.1.1	DisplayString	read-only	The name of the transaction application operation causing the state change.
OCT sstTransState	1.3.6.1.4.1.191.39.13.2.3.1.7.1.2	OCTET STRING	read-write	Getting the value of this attribute provides the last reported state of the transaction application operation. Setting the value allows new state to be sent to the transaction application operation.
sstAgent	1.3.6.1.4.1.191.39.13.2.3.2
STR sstAgentManufacturer	1.3.6.1.4.1.191.39.13.2.3.2.1	DisplayString	read-only	The name of the manufacturer of the SST agent software.
STR sstAgentProduct	1.3.6.1.4.1.191.39.13.2.3.2.2	DisplayString	read-only
STR sstAgentVersion	1.3.6.1.4.1.191.39.13.2.3.2.3	DisplayString	read-only	This attribute does not apply to the agent software.
STR sstAgentSerialNo	1.3.6.1.4.1.191.39.13.2.3.2.4	DisplayString	read-only	This attribute does not apply to the agent software.
STR sstAgentInstallation	1.3.6.1.4.1.191.39.13.2.3.2.5	DisplayString	read-only	The date and time, in DMI-defined format, when the component was (last) installed.
VER sstAgentVerify	1.3.6.1.4.1.191.39.13.2.3.2.6	VerificationState	read-only	A level of verification that the DMI component is installed and functioning. This attribute is not currently supported.
AGE sstAgentState	1.3.6.1.4.1.191.39.13.2.3.2.7	AgentState	read-only	A value for the current state of the agent.
OCT sstAgentLastException	1.3.6.1.4.1.191.39.13.2.3.2.8	OCTET STRING	read-only	Details of the last exception that occurred on the SST, comprising date, time and exception binary data.
INT sstAgentLicenseLevel	1.3.6.1.4.1.191.39.13.2.3.2.9	INTEGER	read-only	The current license level of the agent.
STR sstAgentLicenseCode	1.3.6.1.4.1.191.39.13.2.3.2.10	DisplayString	read-write	The current license code of the agent.
INT sstAgentLocalisationSet	1.3.6.1.4.1.191.39.13.2.3.2.11	INTEGER	read-write	The current local language of the agent. Setting this value causes all DisplayString types to be displayed in the local language of choice. The default value of (0) uses the factory-defined set.
STR sstAgentTime	1.3.6.1.4.1.191.39.13.2.3.2.12	DisplayString	read-only	The current system time and timezone of the SST.
sstAgentFilterTable	1.3.6.1.4.1.191.39.13.2.3.2.13		not-accessible	This table contains a list of DMI Classes and their current Filtered State for traps
sstAgentFilterEntry	1.3.6.1.4.1.191.39.13.2.3.2.13.1		not-accessible	This defines the contents of the table.
STR sstAgentFilterClass	1.3.6.1.4.1.191.39.13.2.3.2.13.1.1	DisplayString	read-write	A DMI style Class definition for an instrumented Group
T/F sstAgentFilterState	1.3.6.1.4.1.191.39.13.2.3.2.13.1.2	TruthValue	read-write	To add a filter to the table, set sstAgentFilterState to 1, supplying the sstAgentFilterClass as the key. A row is added to the table. To remove a filter from the table, set the sstAgentFilterState to 0. The row is removed from the table.
sstLogs	1.3.6.1.4.1.191.39.13.2.4
STR sstLogManufacturer	1.3.6.1.4.1.191.39.13.2.4.1	DisplayString	read-only	The name of the manufacturer of the product.
STR sstLogProduct	1.3.6.1.4.1.191.39.13.2.4.2	DisplayString	read-only
STR sstLogVersion	1.3.6.1.4.1.191.39.13.2.4.3	DisplayString	read-only	This attribute does not apply to the event log software.
STR sstLogSerialNo	1.3.6.1.4.1.191.39.13.2.4.4	DisplayString	read-only	This attribute does not apply to the event log software.
STR sstLogInstallation	1.3.6.1.4.1.191.39.13.2.4.5	DisplayString	read-only	The date and time, in DMI-defined format, when the component was (last) installed.
VER sstLogVerify	1.3.6.1.4.1.191.39.13.2.4.6	VerificationState	read-only	A level of verification that the DMI component is installed and functioning. This attribute is not currently supported.

RFC description

Manages NCR Core SST (System Status and Telemetry) components including device health, verification states, and component service status. Provides device diagnostics and alarm management.

Start monitoring NCR self-service terminal (ATM/retail/POS running Core SST agent) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NCR-CORESST-MIB

What Is NCR-CORESST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description