SHE-ETHERNET-MIB

All MIBs › SHE-ETHERNET-MIB

Organization: Nokia Siemens Networks

Last Updated: 2008-07-14

Description: Nokia Siemens Networks SHE DSLAM Ethernet interface configuration and statistics, including EtherLike counters, flow control, and laser management for uplink ports

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SHE-ETHERNET-MIB?

SHE-ETHERNET-MIB is a Nokia Siemens Networks private MIB for the SHE DSLAM platform, covering the configuration and statistics of its Ethernet interfaces, including uplink ports. It exposes Ethernet-specific configuration data alongside statistics drawn from the standard EtherLike-MIB (collision, alignment, and other frame-error counters), flow-control settings, and laser/optical management for uplink transceivers. In monitoring terms it is used to check both software configuration (port speed/duplex, flow-control mode) and hardware health of the Ethernet uplink, including laser status, which flags a failing or degraded optical transceiver on the uplink port. It explicitly reuses statistic counters from the standard IETF EtherLike-MIB, layering DSLAM-specific laser and flow-control management around them. It is typically deployed by broadband access operators managing SHE-series DSLAM shelves that uplink via Ethernet to the aggregation network. Engineers can download the SHE-ETHERNET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SHE-ETHERNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Siemens Networks SHE DSLAM

Monitoring Examples

An operator would monitor per-port Ethernet error counters modeled on the EtherLike-MIB (e.g. alignment and FCS errors) alongside SHE-specific flow-control and laser-status objects for each uplink port, though exact object names were not present in the sampled source. A rising EtherLike-style error counter on an uplink port combined with a degraded laser status would point to a failing optical transceiver or a dirty/damaged fiber connection on that DSLAM's Ethernet uplink.

What Can Be Monitored

Ethernet interface link status
EtherLike-style frame error counters
flow control status
uplink laser status

Imported Objects

From AN-SHE-MIB

she	OBJECT-IDENTITY

From IF-MIB

ifIndex	OBJECT-TYPE
ifNumber	OBJECT-TYPE

From SHE-TC-MIB

SheControlStatusType
SheEnableType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
sheEthernetMib	1.3.6.1.4.1.231.7.1.2.2.1.5			This MIB contains all ethernet specific configurations and informations. Some statistic counters from the Etherlike MIB are included.
sheEthernet	1.3.6.1.4.1.231.7.1.2.2.1.5.1
sheEthernetPortTable	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1		not-accessible	The ethernet port table.
sheEthernetPortEntry	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1		not-accessible	Each entry represents a physical ethernet interface. Index by ifIndex.
SHE sheEthernetPortType	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.2	SheEthernetPortType	read-only	This value must always be configured. SheEthernetPortType 0 - unknown 1 - electrical 2 - optical Select the type of used interface.
I32 sheEthernetPortTransmissionRate	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.3	Integer32	read-only	The speed of port. Unit is Mbit/s. A modification is only useful for electrical-interfaces. Optical-interfaces will always support 1000 MBIT/s.
SHE sheEthernetPortDuplexMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.4	SheEthernetDuplexType	read-only	The duplex status of port. The SHE will support always full duplex. SheEthernetDuplexType 1 - full 2 - half 3 - notAvailable
SHE sheEthernetPortFlowControl	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.5	SheEthernetFlowControlType	read-only	The flow-control mode of port. SheEthernetFlowControlType 0 - notAvailable 1 - disabled 2 - enabledBoth 4 - enabledSymetrical 8 - enabledAsymetrical The Symetrical types are only useful for electrical GE.
SHE sheEthernetPortNegotiationMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.6	SheEthernetNegotiationModeType	read-only	The Auto Negotiation mode of port. Default is auto. Speed will not be part of the autonegotiation. In case of Rate = 1000 and PortType = electrical, the negotiation mode is always auto (default). SheEthernetNegotiationType 1 - auto 2 - force 3 - notAvailable
SHE sheEthernetPortSfpTranseiver	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.7	SheEthernetTranseiverType	read-only	Code for electrical or optical compatibility. If 0 (unknown) maybe no SFP module is plugged and the following table values are not valid. For she only optical sfp-modules are allowed. SheEthernetTranseiverType 0 - unknown 1 - electrical (1000-T) 2 - electricalCoaxial(1000-CX) 3 - opticalLongHaul(1000-LX) 4 - opticalShortHaul(1000-SX)
OCT sheEthernetPortSfpVendorName	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.8	OCTET STRING	read-only	Sfp transeiver vendor name (ASCII). 16 Byte.
OCT sheEthernetPortSfpVendorPartNumber	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.9	OCTET STRING	read-only	Part number provided by SFP transeiver vendor (ASCII). 16 Byte.
OCT sheEthernetPortSfpVendorRevision	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.10	OCTET STRING	read-only	Revision level for part number provided by vendor (ASCII). 4 Byte.
OCT sheEthernetPortSfpVendorSerialNumber	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.11	OCTET STRING	read-only	Serial number provided by vendor (ASCII). 16 Byte.
OCT sheEthernetPortSfpDateCode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.12	OCTET STRING	read-only	Vendor's manufacturing date code (ASCII). 2 Byte low order digit's for year (00=2000) 2 Byte digits of month's (01=Jan ... 12=Dec) 2 Byte day of month's (01..31) 2 Byte vendor specific lot-code, may be blank
OCT sheEthernetPortPhysicalRemoteChassis	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.13	OCTET STRING	read-only	Only used for Link Discovery. Set by operator. No further meaning for the NE. IP Address of the remote NE.
I32 sheEthernetPortPhysicalRemoteSlot	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.14	Integer32	read-only	Only used for Link Discovery. Set by operator. No further meaning for the NE.
I32 sheEthernetPortPhysicalRemotePort	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.15	Integer32	read-only	Only used for Link Discovery. Set by operator. No further meaning for the NE.
SHE sheEthernetPortPhysicalLinkDiscoveryMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.16	SheLinkDiscoveryModeType	read-only	Only used for Link Discovery. Set by operator. No further meaning for the NE. Automatic mode is not supported by release 1.0.
I32 sheEthernetPortAlarmSeverityIndex	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.17	Integer32	read-only	Used alarm severity for this portentry.
SHE sheEthernetPortStandbyLaserOff	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.18	SheEnableType	read-only	0 disable 1 enable
T/F sheEthernetPortSwitchoverOnLinkDown	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.19	TruthValue	read-only	A given port's link status is monitored. When link down for the port is detected, switchover from an active board to a standby board is performed.
T/F sheEthernetPortSfpDiagnosticValid	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.20	TruthValue	read-only	If set, the following corresponding status parameters are valid.
INT sheEthernetPortSfpTemperature	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.21	INTEGER	read-only	Internally measured transceiver temperature. Represented as a 16 bit signed twos complement value in increments of 1/256 degrees Celsius, yielding a total range of -128C to +128C. Temperature accuracy is vendor specific but must be better than 3 degrees Celsius over specified operating temperature and voltage.The temperature in degrees Celsius is given by the signed twos complement value with LSB equal to 1/256 C. Coding examples: DECIMAL HIGH BYTE LOW BYTE +127.996 7F FF +1.000 01 00 +0.004 00 01 -0.004 FF FF -1.000 FF 00 -127.996 80 01 -128.000 80 00 Only valid if sheEthernetPortSfpDiagnosticValid entry is true.
U32 sheEthernetPortSfpSupplyVoltage	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.22	Unsigned32	read-only	Internally measured transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 .. 65535) with LSB equal to 100 Volt, yielding a total range of 0 to +6.55 Volts. Practical considerations to be defined by transceiver manufacturer will tend to limit the actual bounds of the supply voltage measurement. Accuracy is vendor specific but must be better than 3% of the manufacturers nominal value over specified operating temperature and voltage. Note that in some transceivers, transmitter supply voltage and receiver supply voltage are isolated. In that case, only one supply is monitored. Only valid if sheEthernetPortSfpDiagnosticValid entry is true.
U32 sheEthernetPortSfpLaserBiasCurrent	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.23	Unsigned32	read-only	Measured TX bias current in A. Represented as a 16 bit unsigned integer with the current defined as the full 16 bit value (0 .. 65535) with LSB equal to 2 A, yielding a total range of 0 to 131 mA. Accuracy is vendor specific but must be better than 10% of the manufacturers nominal value over specified operating temperature and voltage. Only valid if sheEthernetPortSfpDiagnosticValid entry is true.
U32 sheEthernetPortSfpTxPower	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.24	Unsigned32	read-only	Measured TX output power. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 .. 65535) with LSB equal to 0.1 W, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Data is assumed to be based on measurement of laser monitor photodiode current. It is factory calibrated to absolute units using the most representative fiber output type. Accuracy is vendor specific but must be better than 3dB over specified temperature and voltage. Data is not valid when the transmitter is disabled. Only valid if sheEthernetPortSfpDiagnosticValid entry is true.
U32 sheEthernetPortSfpRxPower	1.3.6.1.4.1.231.7.1.2.2.1.5.1.1.1.25	Unsigned32	read-only	Measured RX received optical power. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 .. 65535) with LSB equal to 0.1 W, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Absolute accuracy is dependent upon the exact optical wavelength. For the vendor specified wavelength, accuracy shall be better than 3dB over specified temperature and voltage. This accuracy shall be maintained for input power levels up to the lesser of maximum transmitted or maximum received optical power per the appropriate standard. It shall be maintained down to the minimum transmitted power minus cable plant loss (insertion loss or passive loss) per the appropriate standard. Absolute accuracy beyond this minimum required received input optical power range is vendor specific. Only valid if sheEthernetPortSfpDiagnosticValid entry is true.
sheEthernetPortControl	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3
SHE sheEthernetPortControlRequest	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.1	SheEthernetControlRequestType	read-write	setEthernetPortConfiguration: sheEthernetPortControlIndex sheEthernetPortControlType sheEthernetPortControlRate sheEthernetPortControlDuplexMode sheEthernetPortControlFlowControl sheEthernetPortControlNegotiationMode clearEthernetDot3StatsCounters: sheEthernetPortControlIndex setEthernetPortLinkDiscoveryValues: sheEthernetPortControlIndex sheEthernetPortControlPhysicalRemoteChassis sheEthernetPortControlPhysicalRemoteSlot sheEthernetPortControlPhysicalRemotePort sheEthernetPortControlPhysicalLinkDiscoveryMode setEthernetPortStandbyLaserOff: sheEthernetPortControlIndex sheEthernetPortControlStandbyLaserOff setEthernetPortSwitchoverOnLinkDown: sheEthernetPortControlIndex sheEthernetPortControlSwitchoverOnLinkDown setEthernetPortAlarmSeverityIndex: sheEthernetPortControlIndex sheEthernetPortControlAlarmSeverityIndex
I32 sheEthernetPortControlIndex	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.2	Integer32	read-write	The index if the interface to be configured.
SHE sheEthernetPortControlStatus	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.3	SheControlStatusType	read-only	Status of the user command
G32 sheEthernetPortControlTimer	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.4	Gauge32	read-only	The maximum wait time for the manager for a long running user command.
U32 sheEthernetPortControlTimestamp	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.5	Unsigned32	read-only	Time stamp attribute set at the end of a command.
SHE sheEthernetPortControlReqResult	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.6	SheEthernetControlRequestResultType	read-only	The result of the last user command.
SHE sheEthernetPortControlType	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.7	SheEthernetPortType	read-write	Select the type of used interface. SheEthernetPortType 1 - electrical 2 - optical
I32 sheEthernetPortControlRate	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.8	Integer32	read-write	Used Datarate. This configuration is only useful for electrical-interfaces. Optical-interfaces will always support 1000 MBIT/s.
SHE sheEthernetPortControlDuplexMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.9	SheEthernetDuplexType	read-write	Used DuplexMode.
SHE sheEthernetPortControlFlowControl	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.10	SheEthernetFlowControlType	read-write	Used FlowControl-value.
SHE sheEthernetPortControlNegotiationMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.11	SheEthernetNegotiationModeType	read-write	Used Negotiation mode.
OCT sheEthernetPortControlPhysicalRemoteChassis	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.12	OCTET STRING	read-write	Set RemoteCassis-Information.
I32 sheEthernetPortControlPhysicalRemoteSlot	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.13	Integer32	read-write	Set RemoteSlot-Information.
I32 sheEthernetPortControlPhysicalRemotePort	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.14	Integer32	read-write	Set RemotePort-Information.
SHE sheEthernetPortControlPhysicalLinkDiscoveryMode	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.15	SheLinkDiscoveryModeType	read-write	Set mode of Remote-Information retrieval.
I32 sheEthernetPortControlAlarmSeverityIndex	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.16	Integer32	read-write	Set alarm severity for this portentry.
SHE sheEthernetPortControlStandbyLaserOff	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.17	SheEnableType	read-write	.
T/F sheEthernetPortControlSwitchoverOnLinkDown	1.3.6.1.4.1.231.7.1.2.2.1.5.1.3.18	TruthValue	read-write	A given port's link status is monitored. When link down for the port is detected, switchover from an active board to a standby board is performed.
sheDot3StatsTable	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4		not-accessible	From the Etherlike-Mib.
sheDot3StatsEntry	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1		not-accessible	One entry per physical ethernet interface. Index is ifIndex.
C32 sheDot3StatsAlignmentErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.2	Counter32	read-only	A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
C32 sheDot3StatsFCSErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.3	Counter32	read-only	A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
C32 sheDot3StatsSingleCollisionFrames	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.4	Counter32	read-only	A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.
C32 sheDot3StatsMultipleCollisionFrames	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.5	Counter32	read-only	A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
C32 sheDot3StatsSQETestErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.6	Counter32	read-only	A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
C32 sheDot3StatsDeferredTransmissions	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.7	Counter32	read-only	A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
C32 sheDot3StatsLateCollisions	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.8	Counter32	read-only	The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
C32 sheDot3StatsExcessiveCollisions	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.9	Counter32	read-only	A count of frames for which transmission on a particular interface fails due to excessive collisions.
C32 sheDot3StatsInternalMacTransmitErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.10	Counter32	read-only	A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
C32 sheDot3StatsCarrierSenseErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.11	Counter32	read-only	The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
C32 sheDot3StatsFrameTooLongs	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.12	Counter32	read-only	A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
C32 sheDot3StatsInternalMacReceiveErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.13	Counter32	read-only	A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
C32 sheDot3StatsSymbolErrors	1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.14	Counter32	read-only	Symbol error.
sheEthernetNotifications	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5
NTF sheEthernetPortConfigurationChanged	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.1			Port configuration notification.
NTF sheEthernetPortSfpDataChanged	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.2			Port data change notification.
NTF sheEthernetDot3StatsCountersCleared	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.3			Command execution notification.
NTF sheEthernetPortLinkDiscoveryValuesChanged	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.4			Port configuration notification.
NTF sheEthernetPortStandbyLaserOffChanged	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.6			Port configuration notification.
NTF sheEthernetPortSwitchoverOnLinkDownChanged	1.3.6.1.4.1.231.7.1.2.2.1.5.1.5.7			sheEthernetPortControlSwitchoverOnLinkDown has been changed.
sheEthernetConformance	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100
sheEthernetCompliances	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.1
sheEthernetCompliance	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.1.1			Description.
sheEthernetGroups	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.2
sheEthernetPortGroup	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.2.1			Description.
sheEthernetControlGroup	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.2.2			Description.
sheEthernetStatsGroup	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.2.3			Description.
sheEthernetNotificationGroup	1.3.6.1.4.1.231.7.1.2.2.1.5.1.100.2.4			Description.

RFC description

Monitors ethernet ports with configuration and statistical counters for Nokia Siemens Networks equipment.

Start monitoring Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SHE-ETHERNET-MIB

What Is SHE-ETHERNET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description