SHE-ETHERNET-MIB :: sheDot3StatsSingleCollisionFrames

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › SHE-ETHERNET-MIB › sheDot3StatsSingleCollisionFrames

sheDot3StatsSingleCollisionFrames

Module: SHE-ETHERNET-MIB

OID (symbolic): SHE-ETHERNET-MIB::sheDot3StatsSingleCollisionFrames

OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.4

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision.

A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.

What is sheDot3StatsSingleCollisionFrames?

This read-only Counter32, adapted from the standard Etherlike-MIB, counts successfully transmitted frames on this interface whose transmission was delayed by exactly one collision, with the DESCRIPTION noting such frames are also counted in the standard interface output-packet counters but not in sheDot3StatsMultipleCollisionFrames. An admin checks this on shared or half-duplex segments to gauge how often minor contention delays transmission. A nonzero but stable sheDot3StatsSingleCollisionFrames count is normal on a half-duplex or shared-media link, unlike collisions on a full-duplex switch port which would be unexpected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.4
snmpwalk -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsSingleCollisionFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.4.1
snmpget -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsSingleCollisionFrames.1

Start monitoring Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-ETHERNET-MIB::sheDot3StatsSingleCollisionFrames OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.7siemensUnitsAN-MIB
1.3.6.1.4.1.231.7.1oenProductMibsAN-MIB
1.3.6.1.4.1.231.7.1.2anAN-MIB
1.3.6.1.4.1.231.7.1.2.2ppeAN-SHE-MIB
1.3.6.1.4.1.231.7.1.2.2.1sheAN-SHE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.7.1.2.2.1.5sheEthernetMibSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1sheEthernetSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4sheDot3StatsTableSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1sheDot3StatsEntrySHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.4sheDot3StatsSingleCollisionFramesSHE-ETHERNET-MIB