All MIBs › SHE-ETHERNET-MIB › sheDot3StatsSQETestErrors
sheDot3StatsSQETestErrors
Module: SHE-ETHERNET-MIB
OID (symbolic): SHE-ETHERNET-MIB::sheDot3StatsSQETestErrors
OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.6
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
What is sheDot3StatsSQETestErrors?
This read-only Counter32, adapted from the standard Etherlike-MIB, counts SQE TEST ERROR signals generated by the PLS sublayer on this interface, as defined in ANSI/IEEE 802.3-1985 section 7.2.2.2.4. An admin would investigate a nonzero value here as an indicator of an issue with the physical-layer signal-quality-error heartbeat mechanism, a legacy 10 Mbit/s Ethernet feature. Because this counter reflects an older physical-layer test signal, it's most relevant when troubleshooting legacy 10BASE-T rather than modern Gigabit links.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.6 snmpwalk -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsSQETestErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.6.1 snmpget -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsSQETestErrors.1
Start monitoring Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-ETHERNET-MIB::sheDot3StatsSQETestErrors OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.7 | siemensUnits | AN-MIB |
| 1.3.6.1.4.1.231.7.1 | oenProductMibs | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2 | an | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2.2 | ppe | AN-SHE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1 | she | AN-SHE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.2.1.5 | sheEthernetMib | SHE-ETHERNET-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.5.1 | sheEthernet | SHE-ETHERNET-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4 | sheDot3StatsTable | SHE-ETHERNET-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1 | sheDot3StatsEntry | SHE-ETHERNET-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.6 | sheDot3StatsSQETestErrors | SHE-ETHERNET-MIB |