RUGGEDCOM-SYS-INFO-MIB

All MIBs › RUGGEDCOM-SYS-INFO-MIB

Organization: Siemens Canada Ltd., Process Industries and Drives

Last Updated: 2017-11-02

Description: Siemens RuggedCom system information MIB covering device identity, security posture, and fault conditions on ruggedized industrial Ethernet switches

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUGGEDCOM-SYS-INFO-MIB?

RUGGEDCOM-SYS-INFO-MIB is a Siemens RuggedCom vendor MIB covering core system information, security posture, and fault/error conditions on ruggedized industrial Ethernet switches used in harsh environments such as substations and rail systems. It exposes an extensive set of device error indicator objects covering boot failures, watchdog resets, configuration failures, crash logs, memory/stack faults, and connectivity failures to NTP, RADIUS, and TACACS+ servers. Its monitoring value is heavily weighted toward software/system fault status: detecting boot-up errors, watchdog-triggered resets, heap/stack faults, and authentication/time-sync service unreachability that indicate reliability or security problems on the switch. It is a self-contained system-level MIB but functionally complements RuggedCom's other enterprise MIBs for interfaces and redundancy protocols. It is deployed on RuggedCom industrial Ethernet switches in utility substations, rail, and other harsh-environment critical infrastructure, and engineers typically begin with a RUGGEDCOM-SYS-INFO-MIB download to load the module into their SNMP tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUGGEDCOM-SYS-INFO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens RuggedCom industrial Ethernet switch

Monitoring Examples

An administrator would poll rcDeviceErrWatchdogReset and rcDeviceErrBootupError to detect unexpected reboots or startup failures on a ruggedized switch, and check rcDeviceErrRadiusServerUnreachable or rcDeviceErrTacacsServerUnreachable to confirm AAA connectivity is intact. A nonzero rcDeviceErrCrashLogCreated or rcDeviceErrStackOverflow value would indicate a firmware crash requiring log retrieval and vendor support, while rcDeviceErrNtpServerUnreachable flags a time-sync failure that could affect event log accuracy.

What Can Be Monitored

bootup errors
watchdog reset events
configuration failures
crash log creation
stack/heap faults
NTP/RADIUS/TACACS+ server reachability

Imported Objects

From RUGGEDCOM-MIB

ruggedcomMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using rcDeviceStsCpuUsage OID:

Select a Siemens RuggedCom industrial Ethernet switch (system fault/error/security status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rcDeviceStsCpuUsage into the Find box to locate it in the OID tree, then select it and click OK. The percentage in tenths of percent of available CPU cycles used for device operation as measured over the last second when object was retreived. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rcSysInfo	1.3.6.1.4.1.15004.4.2			RuggedCom system information MIB.
rcDeviceError	1.3.6.1.4.1.15004.4.2.1			The main subtree for various errors detected in RuggedCom devices.
STR rcDeviceErrBootupError	1.3.6.1.4.1.15004.4.2.1.1	DisplayString	read-only	The error discovered during bootup process. If there was no error during device bootup, zero length string will be retreived.
T/F rcDeviceErrWatchdogReset	1.3.6.1.4.1.15004.4.2.1.2	TruthValue	read-only	Indicates whether the last device reboot was caused by wachdog.
T/F rcDeviceErrConfigurationFailure	1.3.6.1.4.1.15004.4.2.1.3	TruthValue	read-only	Indicates whether errors were detected while applying configuration settings from configuration file. Configuration is updated from the configureation file at bootup time when file is loaded from nonvolatile memory, or when new file is downloaded to the device. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrCrashLogCreated	1.3.6.1.4.1.15004.4.2.1.4	TruthValue	read-only	Indicates whether the device error that caused creation of an entry in crashlog.txt file was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrStackOverflow	1.3.6.1.4.1.15004.4.2.1.5	TruthValue	read-only	Indicates whether the stack of any of the system tasks is used over the system threshold. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrHeapError	1.3.6.1.4.1.15004.4.2.1.6	TruthValue	read-only	Indicates whether the system memory corruption was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrDateAndTimeSetFailed	1.3.6.1.4.1.15004.4.2.1.7	TruthValue	read-only	Indicates whether the date and time setting in the device falied. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrNtpServerUnreachable	1.3.6.1.4.1.15004.4.2.1.8	TruthValue	read-only	Indicates whether any of NTP servers (if required) can be reached. The value of this object is 'false' if both servers become unreachable. Whenever the value of this object changes, the device will generate the ntpServiceAvailableChange notification.
T/F rcDeviceErrBootPTftpTrFailed	1.3.6.1.4.1.15004.4.2.1.9	TruthValue	read-only	Indicates whether the the file was transfered properly after obtaining IP address from the BootP server. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification.
T/F rcDeviceErrRadiusServerUnreachable	1.3.6.1.4.1.15004.4.2.1.10	TruthValue	read-only	Indicates whether the RADIUS server (if required) can be reached. Whenever the value of this object changes, the device will generate the radiusServiceAvailableChange notification.
T/F rcDeviceErrTacacsServerUnreachable	1.3.6.1.4.1.15004.4.2.1.11	TruthValue	read-only	Indicates whether the TACACS+ server (if required) can be reached. Whenever the value of this object changes, the device will generate the tacacsServiceAvailableChange notification.
BIT rcDeviceErrSystem	1.3.6.1.4.1.15004.4.2.1.12	Bits	read-only	Indicated whether a device failure occured. Whenever the value of this object changes, the device will generate the deviceErrTrap notification.
rcDeviceStatus	1.3.6.1.4.1.15004.4.2.2			The main subtree for various status information detected in RuggedCom devices.
I32 rcDeviceStsCpuUsageEx	1.3.6.1.4.1.15004.4.2.2.1	Integer32	read-only	The percentage in tenths of percent of available CPU cycles used for device operation as measured over the last second when object was retreived.
I32 rcDeviceStsAvailableRam	1.3.6.1.4.1.15004.4.2.2.2	Integer32	read-only	The total number of bytes of RAM still available in the system control CPU.
I32 rcDeviceStsTemperature	1.3.6.1.4.1.15004.4.2.2.3	Integer32	read-only	The temperature measured in the device.
RCH rcDeviceStsPowerSupply1	1.3.6.1.4.1.15004.4.2.2.4	RcHardwareStatus	read-only	Indicates the status of Power Supply Module 1. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification.
RCH rcDeviceStsPowerSupply2	1.3.6.1.4.1.15004.4.2.2.5	RcHardwareStatus	read-only	Indicates the status of Power Supply Module 2. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification.
I32 rcDeviceStsCpuUsagePercent	1.3.6.1.4.1.15004.4.2.2.6	Integer32	read-only	The percentage of available CPU cycles used for device operation as measured over the last second when object was retreived.
INT rcDeviceStsFailSafeRelay	1.3.6.1.4.1.15004.4.2.2.7	INTEGER	read-only	Indicates status of fail safe relay in the device. Fail safe relay is deEnergized(2) if there is at least one active alarm recorded in the device.
T/F rcDeviceStsErrorAlarm	1.3.6.1.4.1.15004.4.2.2.8	TruthValue	read-only	Indicates that at least one alarm of level ERROR, ALERT or CRITICAL is active in the device.
I32 rcDeviceStsNoOfActiveAlarms	1.3.6.1.4.1.15004.4.2.2.9	Integer32	read-only	Number of active alarms currently recorded in device.
RCF rcDeviceStsFanBank1	1.3.6.1.4.1.15004.4.2.2.10	RcFanStatus	read-only	Indicates the status of Fan Bank Module 1.
RCF rcDeviceStsFanBank2	1.3.6.1.4.1.15004.4.2.2.11	RcFanStatus	read-only	Indicates the status of Fan Bank Module 2.
BIT rcDeviceStsPwdsWeak	1.3.6.1.4.1.15004.4.2.2.12	Bits	read-only	Indicates if any of passwords is configured as 'weak'. Change in the value of the bit in this object from '0' to '1' will generate weakPasswordTrap.
BIT rcDeviceStsKeysDflt	1.3.6.1.4.1.15004.4.2.2.13	Bits	read-only	Indicates if any of secure services uses default keys and/or certificates. Customer is advised to update keys for secure services if defaults are used. Change in the value of the bit in this object from '0' to '1' will generate defaultKeysTrap notification.
rcDeviceInfo	1.3.6.1.4.1.15004.4.2.3			The main subtree for RuggedCom devices manufacturing information.
STR rcDeviceInfoSerialNumber	1.3.6.1.4.1.15004.4.2.3.1	DisplayString	read-only	The manufacturing serial number of the device.
STR rcDeviceInfoBootSwVersion	1.3.6.1.4.1.15004.4.2.3.2	DisplayString	read-only	The version and the build date of the boot loader software.
STR rcDeviceInfoMainSwVersion	1.3.6.1.4.1.15004.4.2.3.3	DisplayString	read-only	The version and the build date of the main operating system software.
RCM rcDeviceInfoMainBoardType	1.3.6.1.4.1.15004.4.2.3.4	RcMainBoard	read-only	The identification code of the device main board.
I32 rcDeviceInfoTotalRam	1.3.6.1.4.1.15004.4.2.3.5	Integer32	read-only	The total number of bytes of RAM in the system control CPU.
STR rcDeviceInfoPendingBootSwVersion	1.3.6.1.4.1.15004.4.2.3.6	DisplayString	read-only	The version and the build date of the boot loader software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification.
STR rcDeviceInfoPendingMainSwVersion	1.3.6.1.4.1.15004.4.2.3.7	DisplayString	read-only	The version and the build date of the main operating system software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification.
I32 rcDeviceInfoCfgRevision	1.3.6.1.4.1.15004.4.2.3.8	Integer32	read-only	The configuration file revision. The revision number will be updated whenever file is saved to the flash memory. This number is recorded in config.csv at the time file is uploaded from the device. Whenever the value of this object changes the device will generate cfgChangeTrap notification.
STR rcDeviceInfoMinBootSwVer	1.3.6.1.4.1.15004.4.2.3.9	DisplayString	read-only	The minimum version of the boot loader software required by ROS device. If this version is not newer than the version retreived as a value of object rcDeviceInfoBootSwVersion, trap bootVersionMismatchTrap will be generated.
rcDeviceCommands	1.3.6.1.4.1.15004.4.2.4			The main subtree for device control commands.
T/F rcDeviceCommReset	1.3.6.1.4.1.15004.4.2.4.1	TruthValue	read-write	Setting the value of this object to 'true(1)' will cause device to reboot. As a result of Read request the agent will return value 'false(2)'.
T/F rcDeviceCommLoadDefaultCfg	1.3.6.1.4.1.15004.4.2.4.2	TruthValue	read-write	Setting the value of this object to 'true(1)' will force device to load default configuration to all tables. As a result of Read request the agent will return value 'false(2)'.
T/F rcDeviceCommClearAlarms	1.3.6.1.4.1.15004.4.2.4.3	TruthValue	read-write	Setting the value of this object to 'true(1)' will cause device to clear all alarms. As a result of Read request the agent will return value 'false(2)'.
T/F rcDeviceCommClearSyslog	1.3.6.1.4.1.15004.4.2.4.4	TruthValue	read-write	Setting the value of this object to 'true(1)' will cause device to clear syslog.txt file. As a result of Read request the agent will return value 'false(2)'.
T/F rcDeviceCommClearLogs	1.3.6.1.4.1.15004.4.2.4.5	TruthValue	read-write	Setting the value of this object to 'true(1)' will cause device to clear syslog.txt and crashlog.txt files. As a result of Read request the agent will return value 'false(2)'.
I32 rcDeviceCommIdentify	1.3.6.1.4.1.15004.4.2.4.6	Integer32	read-write	Time Period in seconds for which the device should continue flashing the LEDs when possible so that device is visually recognized. Setting this value to any value greater than 0 will start LED flash timer on the device.Setting the value to 0 will stop the LED flash timer. On Read request agent always sends back the existing Timeout value for LED flash Timer.
rcSysInfoConformance	1.3.6.1.4.1.15004.4.2.5
rcSysInfoGroups	1.3.6.1.4.1.15004.4.2.5.2
rcSysErrObjectsGroup	1.3.6.1.4.1.15004.4.2.5.2.1			A group of objects providing information about irregularities in the device.
rcSysStsObjectsGroup	1.3.6.1.4.1.15004.4.2.5.2.2			A group of objects providing information device resources.
rcSysStsObjectsTemperatureGroup	1.3.6.1.4.1.15004.4.2.5.2.3			This group is created to allow MIBs for products that do not have temperature sensore installed to exclude rcDeviceStsTemperature object.
rcSysStsPowerSupplyGroup	1.3.6.1.4.1.15004.4.2.5.2.4			A group of objects providing information about power supply modules in the device. This group is mandatory for products with redundant power supply.
rcSysInfoDeviceInfoGroup	1.3.6.1.4.1.15004.4.2.5.2.5			A group of object providing manufacturer's information about product's main board hardware, software, identification.
rcSysDeviceCommGroup	1.3.6.1.4.1.15004.4.2.5.2.6			A group of object providing device control commands.
rcSysDeviceCommIdentifyGroup	1.3.6.1.4.1.15004.4.2.5.2.7			A group of object providing device control commands for visual recognisation of the device (LED flashing).
rcSysStsObjectsGroup1	1.3.6.1.4.1.15004.4.2.5.2.8			A group of objects providing information about device resources.
rcSysStsFanBankGroup	1.3.6.1.4.1.15004.4.2.5.2.9			A group of objects providing information about fan bank modules in the device. This group is mandatory for products with redundant fan banks.
rcSysDeviceSecurityGroup	1.3.6.1.4.1.15004.4.2.5.2.10			A group of object providing device control commands.
rcSysDeviceSecurityGroup01	1.3.6.1.4.1.15004.4.2.5.2.11			A group of object providing device control commands.
rcSysErrObjectsGroup1	1.3.6.1.4.1.15004.4.2.5.2.12			A group of objects providing information about device system errors.

RFC description

System information for RuggedCom devices including device status, errors, and security states.

Start monitoring Siemens RuggedCom industrial Ethernet switch (system fault/error/security status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUGGEDCOM-SYS-INFO-MIB