SHE-ETHERNET-MIB :: sheDot3StatsLateCollisions

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › SHE-ETHERNET-MIB › sheDot3StatsLateCollisions

sheDot3StatsLateCollisions

Module: SHE-ETHERNET-MIB

OID (symbolic): SHE-ETHERNET-MIB::sheDot3StatsLateCollisions

OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.8

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet.

Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.

What is sheDot3StatsLateCollisions?

This read-only Counter32, adapted from the standard Etherlike-MIB, counts collisions detected on this interface later than 512 bit-times (51.2 microseconds at 10 Mbit/s) into a frame transmission, which per the DESCRIPTION also count toward other generic collision statistics. An admin treats a nonzero late-collision count as more serious than an ordinary early collision, since it often points to a cabling length or duplex-mismatch problem rather than normal contention. Any nonzero sheDot3StatsLateCollisions on a modern switched link would prompt an admin to immediately check for a duplex mismatch with the connected device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.8
snmpwalk -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsLateCollisions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.8.1
snmpget -v2c -c public <target> SHE-ETHERNET-MIB::sheDot3StatsLateCollisions.1

Start monitoring Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-ETHERNET-MIB::sheDot3StatsLateCollisions OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks SHE DSLAM (Ethernet uplink config, EtherLike error counters, laser status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.7siemensUnitsAN-MIB
1.3.6.1.4.1.231.7.1oenProductMibsAN-MIB
1.3.6.1.4.1.231.7.1.2anAN-MIB
1.3.6.1.4.1.231.7.1.2.2ppeAN-SHE-MIB
1.3.6.1.4.1.231.7.1.2.2.1sheAN-SHE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.7.1.2.2.1.5sheEthernetMibSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1sheEthernetSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4sheDot3StatsTableSHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1sheDot3StatsEntrySHE-ETHERNET-MIB
1.3.6.1.4.1.231.7.1.2.2.1.5.1.4.1.8sheDot3StatsLateCollisionsSHE-ETHERNET-MIB