All MIBs › NSCRTV-ROOT
Category: CATV and HFC
Description: Defines the root OID enterprise hierarchy for NSCRTV (National Standard Cable Radio Television) MIB modules.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NSCRTV-ROOT?
NSCRTV-ROOT is the enterprise root MIB for NSCRTV cable/HFC television plant equipment, defining both the top-level OID hierarchy (via its nscrtvHFCemsTree branch) and shared table conventions used across the NSCRTV element-management MIB family. Beyond the root registration, it defines generic analog and discrete property tables used to model monitored points throughout HFC plant equipment: each analog point carries high-high/high/low/low-low alarm thresholds and a deadband, while discrete points model binary status. This gives it a strong monitoring role: it is the common framework for reporting environmental and equipment alarms, such as out-of-range voltage, temperature, or RF-level readings, across the HFC network, flagging faults when a value crosses its configured alarm thresholds. As a root/shared-conventions MIB, other NSCRTV product-specific MIBs branching from nscrtvRoot depend on it for common alarm and property modeling, and since it is a legacy module, an operator maintaining older HFC gear often needs to track down an NSCRTV-ROOT download from an archived vendor MIB repository to compile its dependent MIBs. It is deployed by cable operators managing distributed HFC plant equipment such as amplifiers, power supplies, and nodes via an element management system (EMS).
IPNetwork Monitor allows you to monitor SNMP objects defined in NSCRTV-ROOT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HFC (Hybrid Fiber Coax) cable plant equipment
- cable TV element management system (EMS) node
Monitoring Examples
A management system polls analogPropertyTable entries, via propertyIdent and analogParameterOID, to read a live analog value and compares it against analogAlarmHIHI/analogAlarmHI/analogAlarmLO/analogAlarmLOLO thresholds with the configured analogAlarmDeadband; a plant power-supply voltage reading crossing analogAlarmLO would raise an alarm state in analogAlarmState, flagging a failing HFC power supply before it causes an outage.
What Can Be Monitored
- analog point values and alarm thresholds (HIHI/HI/LO/LOLO)
- alarm deadband configuration
- discrete point status
- equipment alarm state
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| OCT alarmEnable | 1.3.6.1.4.1.17409.1.1.1.1.2 | OCTET STRING | read-write | Alarm enable control byte, the corresponding position for the'1 'that allow alarm,'0' a ban warning Bit 0: Alarm enable low Bit 1: Alarm enable low Bit 2: Alarm enable high Bit 3: Alarm enable high Bit 4 ~ 7 reservations should be 0 This object should be stored in nonvolatile memory. |
| alarmLogEntry | 1.3.6.1.4.1.17409.1.2.3.1 | not-accessible | Alarm Sheet Head. | |
| INT alarmLogIndex | 1.3.6.1.4.1.17409.1.2.3.1.1 | INTEGER | read-only | The only logo Alarm Index recorded a record in the table, the index value increased from 1 start of each new record, plus 1 until 32,767, a record index of the re-starts at 1. Acting under the management of storage capacity can be the first choice to delete those records, the specific details in this not to achieve provisions. |
| OCT alarmLogInformation | 1.3.6.1.4.1.17409.1.2.3.1.2 | OCTET STRING | read-only | Alarm record information, multi-byte strings, defined as follows: Byte 1 ~ 4: Alarm in time (POSIX format, the previous maximum byte) Byte 5: Alarm types (enumeration, definitions see behind) Byte 6: Alarm value after commonNeStatus Byte 7 ~ m: Alarm parameters object identifier (Basic Encoding Rules (ASN.1)) Byte n ~ z: Alarm parameter values (Basic Encoding Rules (ASN.1)) Alarm enumerated types: 1 NOMINAL 2 HIHI 3 HI 4 LO 5 LOLO 6 Discrete Major 7 Discrete Minor |
| INT alarmLogLastIndex | 1.3.6.1.4.1.17409.1.2.2 | INTEGER | read-only | Recently a warning the index of the records. |
| INT alarmLogNumberOfEntries | 1.3.6.1.4.1.17409.1.2.1 | INTEGER | read-only | Alarm record number of records in the table. |
| alarmLogTable | 1.3.6.1.4.1.17409.1.2.3 | not-accessible | Alarm record form, at least support 16 record. Each table in the registration of a new record, the management agent (transponder) managers should send traps news. | |
| alarmsIdent | 1.3.6.1.4.1.17409.1.2 | |||
| STR alarmText | 1.3.6.1.4.1.17409.1.2.4 | DisplayString | not-accessible | This trap targets for the needs of information contained in a text field transponder information is achievable. The field contains the text of the object depends on the definition of alarm parameters, it is uncertain, This object can not access provisions. |
| INT analogAlarmDeadband | 1.3.6.1.4.1.17409.1.1.1.1.8 | INTEGER | read-write | Dead-alarm threshold value. After the warning, parameter values should be restored to the alarm threshold and alarm threshold and the difference between the absolute value greater than the value of dead zone, the alarm can be removed. This object should be stored in nonvolatile memory. |
| INT analogAlarmHI | 1.3.6.1.4.1.17409.1.1.1.1.5 | INTEGER | read-write | HI high alarm threshold value. This object should be stored in non-volatile memory. |
| INT analogAlarmHIHI | 1.3.6.1.4.1.17409.1.1.1.1.4 | INTEGER | read-write | Alarm HIHI high threshold value. This object should be stored in non-volatile memory. |
| INT analogAlarmLO | 1.3.6.1.4.1.17409.1.1.1.1.6 | INTEGER | read-write | LO low alarm threshold value. This object should be stored in non-volatile memory. |
| INT analogAlarmLOLO | 1.3.6.1.4.1.17409.1.1.1.1.7 | INTEGER | read-write | Alarm LOLO very low threshold value. This object should be stored in non-volatile memory. |
| INT analogAlarmState | 1.3.6.1.4.1.17409.1.1.1.1.3 | INTEGER | read-only | The parameters of the current state of alarm. |
| OID analogParameterOID | 1.3.6.1.4.1.17409.1.1.1.1.1 | OBJECT IDENTIFIER | read-only | index |
| analogPropertyEntry | 1.3.6.1.4.1.17409.1.1.1.1 | not-accessible | Attribute Table simulation parameters head. OID purpose as a table index,Its coding method is'length��OID'��OID former two members'1.3'According to '1'and'3'respectively coding,Instead of ordinary OID encoding (0x2B). | |
| analogPropertyTable | 1.3.6.1.4.1.17409.1.1.1 | not-accessible | Attribute Table simulation parameters | |
| INT commonACKTimeoutWindow | 1.3.6.1.4.1.17409.1.3.2.1.2.2 | INTEGER | read-write | NE awaiting HE overtime to send ACK response time (ms), initialize the default value is 19 ms. The value of this object should be stored in non-volatile memory. |
| commonAdminGroup | 1.3.6.1.4.1.17409.1.3.1 | |||
| commonAdminUseEthernet | 1.3.6.1.4.1.17409.1.3.3 | |||
| commonAdminUseRf | 1.3.6.1.4.1.17409.1.3.2 | |||
| INT commonAgentBootWay | 1.3.6.1.4.1.17409.1.3.3.1.1 | INTEGER | read-write | Starting Method Acting |
| commonAgentGroup | 1.3.6.1.4.1.17409.1.3.3.1 | |||
| INT commonAgentMaxTraps | 1.3.6.1.4.1.17409.1.3.3.1.3 | INTEGER | read-write | Acting detected alarm when sent to the management of the largest number of TRAP, 0 that manufacturers use the default default values. |
| INT commonAgentReset | 1.3.6.1.4.1.17409.1.3.3.1.2 | INTEGER | read-write | Acting Restart, write'1 'will enable agents to restart, the value will be included in other non-functional. Reading this object return value'1 ', the agent had no effect on. |
| STR commonAgentTrapCommunity | 1.3.6.1.4.1.17409.1.3.3.1.7.1.3 | DisplayString | read-write | Send the Community string TRAP. |
| commonAgentTrapEntry | 1.3.6.1.4.1.17409.1.3.3.1.7.1 | not-accessible | Acting Head TRAP Information Table. | |
| INT commonAgentTrapIndex | 1.3.6.1.4.1.17409.1.3.3.1.7.1.1 | INTEGER | read-only | TRAP Table Index. |
| IP commonAgentTrapIP | 1.3.6.1.4.1.17409.1.3.3.1.7.1.2 | IpAddress | read-write | When the purpose of the TRAP host's IP address. |
| INT commonAgentTrapMaxInterval | 1.3.6.1.4.1.17409.1.3.3.1.5 | INTEGER | read-write | Acting TRAP send the largest spacing units for s. |
| INT commonAgentTrapMinInterval | 1.3.6.1.4.1.17409.1.3.3.1.4 | INTEGER | read-write | Acting TRAP send the minimum spacing units for s. |
| INT commonAgentTrapStatus | 1.3.6.1.4.1.17409.1.3.3.1.7.1.4 | INTEGER | read-write | It said the opening of the TRAP. |
| commonAgentTrapTable | 1.3.6.1.4.1.17409.1.3.3.1.7 | not-accessible | Acting Information Table TRAP. | |
| INT commonAlarmDetectionControl | 1.3.6.1.4.1.17409.1.3.1.8 | INTEGER | read-write | This object used to control the Alarm Detection NE. |
| INT commonBackoffMaximumExponent | 1.3.6.1.4.1.17409.1.3.2.1.2.6 | INTEGER | read-write | The body of the MAC layer standard definition of backoff algorithm for standardizing the largest index value, the default value is 15. This value shall be not less than commonBackoffMinimum value. The value of this object should be stored in non-volatile memory. |
| INT commonBackoffMinimumExponent | 1.3.6.1.4.1.17409.1.3.2.1.2.5 | INTEGER | read-write | The standards body of the MAC layer specification definition of the smallest backoff algorithm index value, default values for 6. This value may not exceed commonBackoffMaximumValue value. The value of this object should be stored in non-volatile memory. |
| commonBackoffParams | 1.3.6.1.4.1.17409.1.3.2.1.2 | |||
| INT commonBackoffPeriod | 1.3.6.1.4.1.17409.1.3.2.1.2.1 | INTEGER | read-write | Backoff algorithm benchmark time (ms), initialize the default value of 6 ms. The value of this object should be stored in non-volatile memory. |
| CTR commonBackwardPathCollisionTimes | 1.3.6.1.4.1.17409.1.3.2.1.3.5 | Counter | read-write | Uplink Packet collision frequency, reset to 0. |
| INT commonCheckCode | 1.3.6.1.4.1.17409.1.3.1.10 | INTEGER | read-write | This target for the detection transponder code configuration of the report. The calculation includes detection code transponder (including management equipment) and the physical configuration parameters stored in non-volatile memory of all the parameters. The detection algorithm calculated by the vendor code provisions. The object should be kept in the value of non-volatile memory, the response thinks highly activated, will be recalculated and re-testing code and the value prior to the commencement of comparison to determine whether or should haveһ��hfcColdStart hfcWarmStart traps. When write this object (SetRequest), the detection code will be recalculated and fill the SetRequest in response to the GetResponse. At this time, will not produce or hfcWarmStart traps hfcColdStart. |
| INT commonCraftStatus | 1.3.6.1.4.1.17409.1.3.1.17 | INTEGER | read-only | NE local object that this interface (such as RS232 or RS485 interface) state. NE does not necessarily have to support the local interface. NE local interface without affecting the state of its MAC interface functions; If we do not support the local interface, and its value is disconnected. |
| CTR commonDeviceAcct | 1.3.6.1.4.1.17409.1.3.3.2.2.1.16 | Counter | read-only | Equipment that the accumulated work time, units of s. |
| INT commonDeviceAlarmDetectionControl | 1.3.6.1.4.1.17409.1.3.3.2.2.1.9 | INTEGER | read-write | This object used to control equipment Alarm Detection. |
| INT commonDeviceCraftStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.14 | INTEGER | read-only | This object interface that local equipment (such as RS232 or RS485 interface) state. |
| STR commonDeviceFW | 1.3.6.1.4.1.17409.1.3.3.2.2.1.19 | DisplayString | read-only | Firmware information equipment. |
| commonDeviceGroup | 1.3.6.1.4.1.17409.1.3.3.2 | |||
| OCT commonDeviceId | 1.3.6.1.4.1.17409.1.3.1.19 | OCTET STRING | read-only | The contents of this object by the designated by the equipment vendors, manufacturers and products it contains special ASCII text messages. |
| commonDeviceInfoEntry | 1.3.6.1.4.1.17409.1.3.3.2.2.1 | not-accessible | Acting is currently public information management equipment list Table Head. | |
| commonDeviceInfoTable | 1.3.6.1.4.1.17409.1.3.3.2.2 | not-accessible | Acting is currently public information management equipment List. | |
| INT commonDeviceInternalTemperature | 1.3.6.1.4.1.17409.1.3.3.2.2.1.12 | INTEGER | read-only | Equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table. |
| IP commonDeviceMACAddress | 1.3.6.1.4.1.17409.1.3.3.2.2.1.10 | IpAddress | read-only | Equipment MAC address. |
| STR commonDeviceMFD | 1.3.6.1.4.1.17409.1.3.3.2.2.1.18 | DisplayString | read-only | Date of production equipment. |
| STR commonDeviceModelNumber | 1.3.6.1.4.1.17409.1.3.3.2.2.1.4 | DisplayString | read-only | Equipment Model. |
| STR commonDeviceName | 1.3.6.1.4.1.17409.1.3.3.2.2.1.17 | DisplayString | read-only | Equipment Name. |
| INT commonDeviceNum | 1.3.6.1.4.1.17409.1.3.3.2.1 | INTEGER | read-write | The agent said that the current management is the number of devices. |
| OID commonDeviceOID | 1.3.6.1.4.1.17409.1.3.1.18 | OBJECT IDENTIFIER | read-only | This OID object as a pointer, the equipment was used at MIB (such as Node, two-way amplifier, etc). |
| INT commonDeviceReset | 1.3.6.1.4.1.17409.1.3.3.2.2.1.8 | INTEGER | read-write | Write'1 'will be reset equipment, other values will be written into the non-functional. Reading this object return value'1 ', had no effect on equipment. |
| INT commonDeviceResetCause | 1.3.6.1.4.1.17409.1.3.3.2.2.1.13 | INTEGER | read-only | Equipment that the reasons for the recent reduction. |
| STR commonDeviceSerialNumber | 1.3.6.1.4.1.17409.1.3.3.2.2.1.5 | DisplayString | read-only | The string of equipment. |
| OCT commonDevicesID | 1.3.6.1.4.1.17409.1.3.3.2.2.1.2 | OCTET STRING | read-only | Designated equipment manufacturers logo. |
| INT commonDeviceSlot | 1.3.6.1.4.1.17409.1.3.3.2.2.1.1 | INTEGER | read-only | Acting is currently under the management of the equipment list of public information table Index. |
| OID commonDevicesOID | 1.3.6.1.4.1.17409.1.3.3.2.2.1.15 | OBJECT IDENTIFIER | read-only | Goals identifier string, point to a concrete realization of the equipment. |
| OCT commonDeviceStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.7 | OCTET STRING | read-only | The state equipment Bit 0: RSVD0 Bit 1: RSVD1 Bit 2: RSVD2 Bit 3: MAJOR ALARMS Bit 4: MINOR ALARMS Bit 5: RSVD5 Bit 6: RSVD6 Bit 7: RSVD7 |
| INT commonDeviceTamperStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.11 | INTEGER | read-only | Report of the safety switch equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised. |
| STR commonDeviceVendor | 1.3.6.1.4.1.17409.1.3.3.2.2.1.3 | DisplayString | read-only | Equipment manufacturers. |
| STR commonDeviceVendorInfo | 1.3.6.1.4.1.17409.1.3.3.2.2.1.6 | DisplayString | read-only | Equipment suppliers of other special designated information. |
| INT commondownload | 1.3.6.1.4.1.17409.1.3.1.20 | INTEGER | read-write | |
| CTR commonForwardPathCRCErrors | 1.3.6.1.4.1.17409.1.3.2.1.3.3 | Counter | read-write | CRC errors down the number of reset to 0. |
| CTR commonForwardPathFramingErrors | 1.3.6.1.4.1.17409.1.3.2.1.3.2 | Counter | read-write | Downlink Channel frames wrong number reset to 0. |
| INT commonForwardPathFrequency | 1.3.6.1.4.1.17409.1.3.2.2.2 | INTEGER | read-only | Downlink frequency channel, flat Hz. The value of this object should be stored in non-volatile memory. |
| CTR commonForwardPathLOSEvents | 1.3.6.1.4.1.17409.1.3.2.1.3.1 | Counter | read-write | LOS downlink channel in the number of reset to 0. |
| INT commonForwardPathReceiveLevel | 1.3.6.1.4.1.17409.1.3.2.2.4 | INTEGER | read-only | Downlink Channel receive power levels, units dBuV. |
| commonIdent | 1.3.6.1.4.1.17409.1.3 | |||
| INT commonInternalTemperature | 1.3.6.1.4.1.17409.1.3.1.13 | INTEGER | read-only | NE equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table. |
| CTR commonInvalidMacCmds | 1.3.6.1.4.1.17409.1.3.2.1.3.4 | Counter | read-write | Invalid MAC layer order wrong number reset to 0. |
| commonMacAddress | 1.3.6.1.4.1.17409.1.3.2.1.1 | |||
| commonMACGroup | 1.3.6.1.4.1.17409.1.3.2.1 | |||
| commonMacStats | 1.3.6.1.4.1.17409.1.3.2.1.3 | |||
| INT commonMaximumMACLayerRetries | 1.3.6.1.4.1.17409.1.3.2.1.2.3 | INTEGER | read-write | NE data packets sent the greatest number of re-examination. Initialize the default value is 16. The value of this object should be stored in non-volatile memory. |
| INT commonMaxMulticastAddresses | 1.3.6.1.4.1.17409.1.3.2.1.1.2 | INTEGER | read-only | NE equipment to support the greatest number of multicast addresses. |
| INT commonMaxPayloadSize | 1.3.6.1.4.1.17409.1.3.2.1.2.4 | INTEGER | read-only | From top to bottom line channel packet supported by the largest payload (payload) the length of. |
| INT commonMaxReturnPower | 1.3.6.1.4.1.17409.1.3.2.2.5 | INTEGER | read-write | The largest upstream channel power levels and units for dBuV. The value of this object should be stored in non-volatile memory. |
| commonMulticastAddressEntry | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1 | not-accessible | Multicast addresses Table Head. | |
| INT commonMulticastAddressIndex | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1.1 | INTEGER | read-only | Multicast addresses Index. |
| OCT commonMulticastAddressNumber | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1.2 | OCTET STRING | read-write | Multicast addresses,I/Gbit |
| commonMulticastAddressTable | 1.3.6.1.4.1.17409.1.3.2.1.1.3 | not-accessible | Multicast addresses Table, the value of this object should be stored in nonvolatile memory. | |
| OCT commonNELogicalID | 1.3.6.1.4.1.17409.1.3.1.1 | OCTET STRING | read-write | The logic of the designated NE identifier (LogicID), the values and attributes of other unrelated NE. This target value should be stored in non-volatile memory. |
| STR commonNEModelNumber | 1.3.6.1.4.1.17409.1.3.1.3 | DisplayString | read-only | NE equipment models. |
| STR commonNESerialNumber | 1.3.6.1.4.1.17409.1.3.1.4 | DisplayString | read-only | NE equipment serial numbers. |
| OCT commonNEStatus | 1.3.6.1.4.1.17409.1.3.1.6 | OCTET STRING | read-only | With 7.5.4 STATRESP PDU parameters in the corresponding Status Bit 0: CHNLRQST Bit 1: CNTNRM Bit 2: CNTCUR Bit 3: MAJOR ALARMS Bit 4: MINOR ALARMS Bit 5: RSVD1 Bit 6: RSVD2 Bit 7: RSVD3 |
| IP commonNetworkAddress | 1.3.6.1.4.1.17409.1.3.1.9 | IpAddress | read-only | NE network IP address, NE produce Trap should include this address. This value should be stored in nonvolatile memory. This value can be registered through the MAC order or through local vendors to set up Interface. |
| STR commonNEVendor | 1.3.6.1.4.1.17409.1.3.1.2 | DisplayString | read-only | NE equipment manufacturers. |
| STR commonNEVendorInfo | 1.3.6.1.4.1.17409.1.3.1.5 | DisplayString | read-only | NE equipment suppliers other special designated information. |
| OCT commonPhysAddress | 1.3.6.1.4.1.17409.1.3.2.1.1.1 | OCTET STRING | read-only | NE MAC (physical) address. |
| INT commonProvisionedReturnPowerLevel | 1.3.6.1.4.1.17409.1.3.2.2.3 | INTEGER | read-write | Upstream channel power levels and units for dBuV. When the internal use of this value will be rounded to the nearest support value. Reading return to this subject when the actual value rather than rounding value. The value of this object should be stored in non-volatile memory. |
| INT commonReset | 1.3.6.1.4.1.17409.1.3.1.7 | INTEGER | read-write | Write'1 'will be reset NE equipment, the value will be included in other non-functional. Reading this object return value'1 ', had no effect on equipment. |
| INT commonResetCause | 1.3.6.1.4.1.17409.1.3.1.16 | INTEGER | read-only | NE said the reasons for the recent reduction. |
| INT commonReturnPathFrequency | 1.3.6.1.4.1.17409.1.3.2.2.1 | INTEGER | read-only | Channel uplink frequency units Hz. The value of this object should be stored in non-volatile memory. |
| commonRfGroup | 1.3.6.1.4.1.17409.1.3.2.2 | |||
| INT commonTamperStatus | 1.3.6.1.4.1.17409.1.3.1.12 | INTEGER | read-only | The safety report NE switching equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised. |
| INT commonTime | 1.3.6.1.4.1.17409.1.3.1.14 | INTEGER | read-write | NE of the POSIX said that the current time (since at 0:00 on January 1, 1970 since the seconds). |
| OCT commonTrapAck | 1.3.6.1.4.1.17409.1.3.3.1.6 | OCTET STRING | read-write | The variables used to notify Snmp agents, it issued the warning Trap has received information management console, do not have to re-hair. The content of the variables in alarmLogInformation MIB and the same warning. Agents received after the adoption of alarmLogInformation management can clearly know the host response is a warning which Trap information, thereby stop the alarm information re the Trap. |
| OCT commonTrapCommunityString | 1.3.6.1.4.1.17409.1.3.1.11 | OCTET STRING | read-write | Definition of Community Trap string. The default value is' public '. The value of this object should be stored in non-volatile memory. |
| INT commonVarBindings | 1.3.6.1.4.1.17409.1.3.1.15 | INTEGER | read-only | This object can be said to receive SNMP information NE variables bundled the largest number of tables. Value: 0 indicated no restrictions on the maximum number bundled. |
| currentAlarmEntry | 1.3.6.1.4.1.17409.1.1.3.1 | not-accessible | The current warning Table Head. OID coding methods with simulation attribute table. | |
| OID currentAlarmOID | 1.3.6.1.4.1.17409.1.1.3.1.1 | OBJECT IDENTIFIER | read-only | NE, currently in a state of alarm parameters OID Index, and attribute the alarm in the table corresponding parameters OID. |
| INT currentAlarmState | 1.3.6.1.4.1.17409.1.1.3.1.2 | INTEGER | read-only | Warning parameters of the current state of alarm. |
| currentAlarmTable | 1.3.6.1.4.1.17409.1.1.3 | not-accessible | The current warning Table. | |
| INT currentAlarmValue | 1.3.6.1.4.1.17409.1.1.3.1.3 | INTEGER | read-only | Alarm parameter's value. |
| INT discreteAlarmEnable | 1.3.6.1.4.1.17409.1.1.2.1.3 | INTEGER | read-write | When the alarm so that it can open the (2 or 3), this parameter allows for alarm processing. If the alarm so that it can shut down (1), alarm processing will be carried out. This object default values for the disable (1). This object should be stored in non-volatile memory. |
| INT discreteAlarmState | 1.3.6.1.4.1.17409.1.1.2.1.4 | INTEGER | read-only | The parameters of the current state of alarm. |
| INT discreteAlarmValue | 1.3.6.1.4.1.17409.1.1.2.1.2 | INTEGER | read-only | Attribute Table discrete index 2: parameter values. When the equipment value of this parameter values, and so will be dealt with a warning. |
| OID discreteParameterOID | 1.3.6.1.4.1.17409.1.1.2.1.1 | OBJECT IDENTIFIER | read-only | Attribute Table discrete index 1: Parameters OID. |
| discretePropertyEntry | 1.3.6.1.4.1.17409.1.1.2.1 | not-accessible | Attribute Table discrete head. OID coding methods with simulation attribute table | |
| discretePropertyTable | 1.3.6.1.4.1.17409.1.1.2 | not-accessible | Discrete Attribute Table. | |
| NTF hfcAlarmEvent | 1.3.6.1.4.1.17409.1.0.1 | When detected in the event of alarm information sent this trap, whether bundled alarmText variable parameter under warning object to determine. Some of the parameters only need to bind the alarm first three variables. | ||
| NTF hfcColdStart | 1.3.6.1.4.1.17409.1.0.0 | HfcColdStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement may have changed. This trap only after the success of transponder sent registration. | ||
| NTF hfcWarmStart | 1.3.6.1.4.1.17409.1.0.2 | HfcWarmStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement has not changed. This trap only after the completion of transponder sent registration. | ||
| nscrtvHFCemsTree | 1.3.6.1.4.1.17409.1 | |||
| nscrtvRoot | 1.3.6.1.4.1.17409 | |||
| INT oaDCPowerCurrent | 1.3.6.1.4.1.17409.1.11.7.1.3 | INTEGER | read-only | Electricity power supply unit is 0.01 A. This attribute MIB objects require an entry in the register. |
| oaDCPowerEntry | 1.3.6.1.4.1.17409.1.11.7.1 | not-accessible | DC Power Information Table Head. | |
| INT oaDCPowerIndex | 1.3.6.1.4.1.17409.1.11.7.1.1 | INTEGER | read-only | DC Power Index. |
| STR oaDCPowerName | 1.3.6.1.4.1.17409.1.11.7.1.4 | DisplayString | read-only | Indicate the name of the power supply, for example: 24 V DC power supply. This field value by the user, should at least be marked with a number of power supply voltage and distinguish between each other. When the object of this table have a warning, that this object should be put into the name of alarmText hfcAlarmEvent traps in the target. |
| INT oaDCPowerSupplyMode | 1.3.6.1.4.1.17409.1.11.6 | INTEGER | read-only | Power supply mode: load sharing, standby switching or an independent power supply. |
| oaDCPowerTable | 1.3.6.1.4.1.17409.1.11.7 | not-accessible | DC Power Information Table. | |
| INT oaDCPowerVoltage | 1.3.6.1.4.1.17409.1.11.7.1.2 | INTEGER | read-only | Supply voltage, the unit is 0.1 V. This attribute MIB objects require an entry in the register. |
| INT oaGainSet | 1.3.6.1.4.1.17409.1.11.12 | INTEGER | read-write | units to 0.1 dB |
| oaIdent | 1.3.6.1.4.1.17409.1.11 | |||
| INT oaInputOpticalPower | 1.3.6.1.4.1.17409.1.11.3 | INTEGER | read-only | Input optical power units to 0.1 dBm, the object attributes required to register an entry MIB. |
| INT oaNumberDCPowerSupply | 1.3.6.1.4.1.17409.1.11.5 | INTEGER | read-only | The number of internal DC power supply, 0 expressed transponder does not support this function. |
| INT oaOutputOpticalPower | 1.3.6.1.4.1.17409.1.11.2 | INTEGER | read-only | The output optical power units to 0.1 dBm, the object attributes required to register an entry MIB. |
| INT oaOutputOpticalPowerSet | 1.3.6.1.4.1.17409.1.11.11 | INTEGER | read-write | The output optical power control ,units to 0.1 dBm |
| INT oaPumpBIAS | 1.3.6.1.4.1.17409.1.11.4.1.2 | INTEGER | read-only | The pump laser bias current, flat mA, this attribute MIB objects require an entry in the register. |
| oaPumpEntry | 1.3.6.1.4.1.17409.1.11.4.1 | not-accessible | Each laser-pumped optical amplifier Information Table Head. | |
| INT oaPumpIndex | 1.3.6.1.4.1.17409.1.11.4.1.1 | INTEGER | read-only | Laser-pumped optical amplifier index value. |
| oaPumpTable | 1.3.6.1.4.1.17409.1.11.4 | not-accessible | EDFA laser pump Information Table. | |
| INT oaPumpTEC | 1.3.6.1.4.1.17409.1.11.4.1.3 | INTEGER | read-only | Current laser pump refrigeration unit is 0.01 A, this attribute MIB objects require an entry in the register. |
| INT oaPumpTemp | 1.3.6.1.4.1.17409.1.11.4.1.4 | INTEGER | read-only | Laser pump temperature, units of 0.10 C, this attribute MIB objects require an entry in the register. |
| OID oaVendorOID | 1.3.6.1.4.1.17409.1.11.1 | OBJECT IDENTIFIER | read-only | This object provides manufacturers of optical amplifier MIB expansion. Without the expansion, this should be targeting at the optical amplifier nodes oaIdent. |
| INT powerSupplyStatusA | 1.3.6.1.4.1.17409.1.11.32 | INTEGER | read-only | Returns the operating status of power supply A. |
| INT powerSupplyStatusB | 1.3.6.1.4.1.17409.1.11.33 | INTEGER | read-only | Returns the operating status of power supply B. |
| propertyIdent | 1.3.6.1.4.1.17409.1.1 |
RFC description
Root object identifier defining SNMP management structure for Chinese broadcasting and telecommunications equipment including HFC, EPON, and optical systems.
Start monitoring HFC (Hybrid Fiber Coax) cable plant equipment / EMS node (NSCRTV, enterprise OID root) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.