All MIBs › INTEL-S500-MIB
Category: Vendor: Intel
Description: Intel S500 series network device MIB providing SNMP management objects for device status and port configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is INTEL-S500-MIB?
INTEL-S500-MIB is a vendor-specific MIB for Intel's S500 series network devices, providing SNMP management objects for general device status and port configuration according to its short description. No module description or sample object/table names were available in the source excerpt for this module, so specific data points cannot be confirmed. In general, MIBs of this type in Intel's switch/device management line are used to check hardware and port-level operational status from a central manager, but without object names it isn't possible to confirm whether uptime, temperature, CPU/memory, or power/fan health specifically are exposed here. There's no indication in the available material of dependency on another standard MIB. It would typically be deployed as part of Intel's network device management line, polled from an SNMP-based network management station. Engineers can download the INTEL-S500-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-S500-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Intel S500 series network devices
Monitoring Examples
No sample objects were available in the source material for this MIB, so no specific object or table names can be honestly cited. Based only on the short description, monitoring would likely involve generic device status and port configuration objects typical of Intel's switch product SNMP support, but this cannot be confirmed without the actual object definitions.
This MIB depends on
Related MIBs
Imported Objects
From INTEL-GEN-MIB
| mib2ext | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| s500 | 1.3.6.1.4.1.343.6.10 | |||
| NTF s500PermVioEvent | 1.3.6.1.4.1.343.6.10.0.1 | This trap is sent when there has been a permanent entry violation. A MAC address has been detected at a port, other than the port where it has been configured as a permanent entry. The variable portIfIndex indicates the port where the MAC incorrectly has been detected. The problem can be solved by re-configuring the MAC's permanent entry, or by physically moving the MAC to the port it has been configured for. | ||
| NTF s500AdaptiveForwEvent | 1.3.6.1.4.1.343.6.10.0.2 | This trap is sent when a port automatically is changing forwarding mode. This will only happen when the port has been configured to Adaptive mode. The syntax is (Portnumber, New mode, Old mode) | ||
| NTF s500TemperatureEvent | 1.3.6.1.4.1.343.6.10.0.3 | This trap indicates that the temparature of the chassis has changed | ||
| NTF s500RedundantPowerSupplyEvent | 1.3.6.1.4.1.343.6.10.0.4 | This trap indicates that the status of the redundant power supply has changed | ||
| INT defaultSwitchMode | 1.3.6.1.4.1.343.6.10.1.1 | INTEGER | read-write | Default switch mode. This is used by the object portSwitchMode when it's value is default(1) |
| INT defaultFlowControlMode | 1.3.6.1.4.1.343.6.10.1.2 | INTEGER | read-write | Default Flow Control mode. This is used by the object portConfFlowControl when it's value is default(1) |
| INT smuMaster | 1.3.6.1.4.1.343.6.10.1.3 | INTEGER | read-only | OBSOLETE |
| INT localManagementTimeout | 1.3.6.1.4.1.343.6.10.1.4 | INTEGER | read-write | The time (in minutes) that has elapsed before a local management session (telnet or serial) closes when it has not been used. The value '0' means no timeout. |
| INT temperatureLevel | 1.3.6.1.4.1.343.6.10.1.5 | INTEGER | read-only | temperatureLevel values: normal(1) : Temperature normal high(2) : Temperature high. Check air circulation critical(3): Temperature critical. Shut down in 30 seconds |
| INT redundantPowerSupplyStatus | 1.3.6.1.4.1.343.6.10.1.6 | INTEGER | read-only | Status for redundant power supply: notPresent(1): RPS not connected or failed. (It may be present but not plugged in or damaged etc.) present(2): RPS not active. (It may be present, connected, in perfect health, but just not being used.) active(3): RPS active |
| INT portMirroring | 1.3.6.1.4.1.343.6.10.1.7 | INTEGER | read-write | enable(1): Enabling of port mirroring. This is only possible if RMON is disabled. disable(2): Disabling of port mirroring. RMON can only be enabled if port mirroring is disabled |
| INT disableRmon | 1.3.6.1.4.1.343.6.10.1.8 | INTEGER | write-only | destroyAll(1): Disable RMON and destroy all probes. This is necessary for enabling port mirroring |
| INT isRmonActive | 1.3.6.1.4.1.343.6.10.1.9 | INTEGER | read-only | enabled(1): RMON is enabled disabled(2): RMON is disabled |
| CTR switchTotalTraffic | 1.3.6.1.4.1.343.6.10.1.10 | Counter | read-only | Total switch traffic measured in octets |
| INT bufferPoolUsed | 1.3.6.1.4.1.343.6.10.1.11 | INTEGER | read-only | Total switch buffer pool usage. (percentage between 0 and 100) |
| OCT featuresBitFlag | 1.3.6.1.4.1.343.6.10.1.12 | OCTET STRING | read-only | Bit field index from bit 1 to 32. If an bit is set, the switch supports the related feature. BIT 1: Distributed VLAN BIT 2: Layer 3 switching BIT 3: Diagnostics BIT 4: RSVP BIT 5: IP multicast BIT 6: IP filtering BIT 7: ATM STP BIT 8: Port trunking BIT 9: Port mirroring BIT 10: VLAN stacking BIT 11: Forwarding of learn packets BIT 12: IGMP pruning BIT 13: ToS BIT 14: Bulk En-/Disable STP BIT 15: VLAN table flush BIT 16: Transparent Cache BIT 17: Compressed Stack |
| INT switchBw | 1.3.6.1.4.1.343.6.10.1.13 | INTEGER | read-only | Max switch BW. (Mbits per second) |
| INT ownMatrixAttachmentPort | 1.3.6.1.4.1.343.6.10.1.14 | INTEGER | read-only | Returns the port number of the Matrix port the switch is attached to. NB: will return 50 for a switch not connected to a Matrix Module |
| INT stackCrc | 1.3.6.1.4.1.343.6.10.1.15 | INTEGER | read-only | checksum for stack specific parameters If a parameter is unavailable 0 is returned |
| ports | 1.3.6.1.4.1.343.6.10.2 | |||
| INT portSnmpPort | 1.3.6.1.4.1.343.6.10.2.1 | INTEGER | read-only | Returns the port which this SNMP request went through. This gives the port on which the SNMP management system is connected. |
| TIK portLastChange | 1.3.6.1.4.1.343.6.10.2.2 | TimeTicks | read-only | The value of sysUpTime after any interface has changed state |
| portInfoTable | 1.3.6.1.4.1.343.6.10.2.3 | not-accessible | Port information table which includes all ports. | |
| portInfoEntry | 1.3.6.1.4.1.343.6.10.2.3.1 | not-accessible | Contains the type of interface . | |
| INT portInfoChassisIndex | 1.3.6.1.4.1.343.6.10.2.3.1.1 | INTEGER | read-only | Chassis index |
| INT portInfoModuleIndex | 1.3.6.1.4.1.343.6.10.2.3.1.2 | INTEGER | read-only | Module index |
| INT portInfoIndex | 1.3.6.1.4.1.343.6.10.2.3.1.3 | INTEGER | read-only | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT portInfoType | 1.3.6.1.4.1.343.6.10.2.3.1.4 | INTEGER | read-only | The type of Physical interface at the port. |
| portConfTable | 1.3.6.1.4.1.343.6.10.2.4 | not-accessible | Port configuration and status table. | |
| portConfEntry | 1.3.6.1.4.1.343.6.10.2.4.1 | not-accessible | An entry containing the objects for configuration and status of a port. | |
| INT portConfChassisIndex | 1.3.6.1.4.1.343.6.10.2.4.1.1 | INTEGER | read-only | Chassis index |
| INT portConfModuleIndex | 1.3.6.1.4.1.343.6.10.2.4.1.2 | INTEGER | read-only | Module index |
| INT portConfIndex | 1.3.6.1.4.1.343.6.10.2.4.1.3 | INTEGER | read-only | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| STR portConfDescr | 1.3.6.1.4.1.343.6.10.2.4.1.4 | DisplayString | read-write | User configurable description of the port. |
| STR portConfLocation | 1.3.6.1.4.1.343.6.10.2.4.1.5 | DisplayString | read-write | User configurable location of the port. |
| INT portConfConfigSwitchMode | 1.3.6.1.4.1.343.6.10.2.4.1.6 | INTEGER | read-write | Port Switch mode. If set to default(1) the value from defaultSwitchMode is used. |
| INT portConfFlowControl | 1.3.6.1.4.1.343.6.10.2.4.1.7 | INTEGER | read-write | Port Flow Control mode. If set to default(1) the value from defaultFlowControlMode is used. |
| INT portConfSpeedSupported | 1.3.6.1.4.1.343.6.10.2.4.1.8 | INTEGER | read-only | The possible speeds of a port |
| INT portConfDuplexSupported | 1.3.6.1.4.1.343.6.10.2.4.1.9 | INTEGER | read-only | The possible duplex modes of a port |
| INT portConfConfigSpeed | 1.3.6.1.4.1.343.6.10.2.4.1.10 | INTEGER | read-write | The configured speed for a port |
| INT portConfConfigDuplex | 1.3.6.1.4.1.343.6.10.2.4.1.11 | INTEGER | read-write | The configured duplex mode for a port |
| INT portConfConfigAutoNeg | 1.3.6.1.4.1.343.6.10.2.4.1.12 | INTEGER | read-write | The configured auto-negotiation for a port |
| INT portConfSpeed | 1.3.6.1.4.1.343.6.10.2.4.1.13 | INTEGER | read-only | The current speed for a port |
| INT portConfDuplex | 1.3.6.1.4.1.343.6.10.2.4.1.14 | INTEGER | read-only | The current duplex mode for a port |
| INT portConfAutoNeg | 1.3.6.1.4.1.343.6.10.2.4.1.15 | INTEGER | read-only | The currect auto-negotiation for a port |
| INT portConfSwitchMode | 1.3.6.1.4.1.343.6.10.2.4.1.16 | INTEGER | read-only | Current forwarding mode of the port. |
| INT portConfTrunkSupported | 1.3.6.1.4.1.343.6.10.2.4.1.17 | INTEGER | read-only | The types of port trunking available for the actual port. A trunk consists of a number ports sitting next to each other. The first port is selected as master for the trunk, the following as slaves. trunkWidthTwo(1): Port is available as master for 2 port trunking. trunkWidthFour(2): Port is available as master for 4 port trunking. trunkMaster(3): Port is master in a trunk. trunkSlave(4): Port is slave in a trunk. notAvailable(99): Port is not available for trunking. |
| INT portConfTrunkConfig | 1.3.6.1.4.1.343.6.10.2.4.1.18 | INTEGER | read-write | The size of the actual trunk. 0 means trunkWidthTwo(1): This port is member of a 2 port trunk. trunkWidthFour(2):This port is member of a 4 port trunk. disable(99): This port is not trunked |
| STR portConfTrunkName | 1.3.6.1.4.1.343.6.10.2.4.1.19 | DisplayString | read-write | Trunk name |
| INT portConfMirrorSupported | 1.3.6.1.4.1.343.6.10.2.4.1.20 | INTEGER | read-only | Which mode of port mirroring does the port support. mirrorSourceOnly(1): Port can only be used as source for mirroring mirrorDestinationOnly(2): Port can only be used as destination for mirroring mirrorSourceOrDestination(3): Port can be used as source or destination notAvailable(99): Port can not be used for mirroring |
| INT portConfMirrorConfig | 1.3.6.1.4.1.343.6.10.2.4.1.21 | INTEGER | read-write | The configured port mirroring for the actual port. mirrorSource(1): Port is source for mirroring mirrorDestination(2): Port is destination for mirroring disabled(99): Port is not mirrored |
| INT portConfVlanSupported | 1.3.6.1.4.1.343.6.10.2.4.1.22 | INTEGER | read-only | Describes if the port can be used as a port rule in the VLAN configuration. enabled(1): Port can be used in port VLANs notAvailable(99): Port can not be used in port VLANs |
| INT portAllSpanningTreeMode | 1.3.6.1.4.1.343.6.10.2.5 | INTEGER | read-write | Enable or Disable Spanning Tree Protocol for all ports on switch. SET is only allowed with value allEnabled(1) or allDisabled(2). |
| statistic | 1.3.6.1.4.1.343.6.10.3 | |||
| txStatTable | 1.3.6.1.4.1.343.6.10.3.1 | not-accessible | Transmit statistics table. | |
| txStatEntry | 1.3.6.1.4.1.343.6.10.3.1.1 | not-accessible | An entry containing objects for transmit statistics. | |
| INT txStatIndex | 1.3.6.1.4.1.343.6.10.3.1.1.1 | INTEGER | read-only | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| CTR txUCPkts64Octets | 1.3.6.1.4.1.343.6.10.3.1.1.2 | Counter | read-only | 64 byte unicast packets transmitted |
| CTR txUCPkts65To127Octets | 1.3.6.1.4.1.343.6.10.3.1.1.3 | Counter | read-only | 65 to 127 byte unicast packets transmitted |
| CTR txUCPkts128To255Octets | 1.3.6.1.4.1.343.6.10.3.1.1.4 | Counter | read-only | 128 to 255 byte unicast packets transmitted |
| CTR txUCPkts256To511Octets | 1.3.6.1.4.1.343.6.10.3.1.1.5 | Counter | read-only | 256 to 511 byte unicast packets transmitted |
| CTR txUCPkts512To1023Octets | 1.3.6.1.4.1.343.6.10.3.1.1.6 | Counter | read-only | 512 to 1023 byte unicast packets transmitted |
| CTR txUCPkts1024To1518Octets | 1.3.6.1.4.1.343.6.10.3.1.1.7 | Counter | read-only | 1024 to 1518 byte unicast packets transmitted |
| CTR txMCPkts64Octets | 1.3.6.1.4.1.343.6.10.3.1.1.8 | Counter | read-only | 64 byte multicast packets transmitted |
| CTR txMCPkts65To127Octets | 1.3.6.1.4.1.343.6.10.3.1.1.9 | Counter | read-only | 65 to 127 byte multicast packets transmitted |
| CTR txMCPkts128To255Octets | 1.3.6.1.4.1.343.6.10.3.1.1.10 | Counter | read-only | 128 to 255 byte multicast packets transmitted |
| CTR txMCPkts256To511Octets | 1.3.6.1.4.1.343.6.10.3.1.1.11 | Counter | read-only | 256 to 511 byte multicast packets transmitted |
| CTR txMCPkts512To1023Octets | 1.3.6.1.4.1.343.6.10.3.1.1.12 | Counter | read-only | 512 to 1023 byte multicast packets transmitted |
| CTR txMCPkts1024To1518Octets | 1.3.6.1.4.1.343.6.10.3.1.1.13 | Counter | read-only | 1024 to 1518 byte multicast packets transmitted |
| CTR txBCPkts64Octets | 1.3.6.1.4.1.343.6.10.3.1.1.14 | Counter | read-only | 64 byte broadcast packets transmitted |
| CTR txBCPkts65To127Octets | 1.3.6.1.4.1.343.6.10.3.1.1.15 | Counter | read-only | 65 to 127 byte broadcast packets transmitted |
| CTR txBCPkts128To255Octets | 1.3.6.1.4.1.343.6.10.3.1.1.16 | Counter | read-only | 128 to 255 byte broadcast packets transmitted |
| CTR txBCPkts256To511Octets | 1.3.6.1.4.1.343.6.10.3.1.1.17 | Counter | read-only | 256 to 511 byte broadcast packets transmitted |
| CTR txBCPkts512To1023Octets | 1.3.6.1.4.1.343.6.10.3.1.1.18 | Counter | read-only | 512 to 1023 byte broadcast packets transmitted |
| CTR txBCPkts1024To1518Octets | 1.3.6.1.4.1.343.6.10.3.1.1.19 | Counter | read-only | 1024 to 1518 byte broadcast packets transmitted |
| CTR txOctetsIllegalAddrType | 1.3.6.1.4.1.343.6.10.3.1.1.20 | Counter | read-only | Internal error -- not possible. Always zero. |
| CTR tx1ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.21 | Counter | read-only | Tx packets delayed less than 1 slot time (due to NIMBUS overload). |
| CTR tx2ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.22 | Counter | read-only | Tx packets delayed between 1 and 2 slot times (due to NIMBUS overload) |
| CTR tx3ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.23 | Counter | read-only | Tx packets delayed between 2 and 4 slot times (due to NIMBUS overload) |
| CTR tx4ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.24 | Counter | read-only | Tx packets delayed between 4 and 8 slot times (due to NIMBUS overload) |
| CTR tx5ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.25 | Counter | read-only | Tx packets delayed between 8 and 16 slot times (due to NIMBUS overload) |
| CTR tx6ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.26 | Counter | read-only | Tx packets delayed between 16 and 32 slot times (due to NIMBUS overload) |
| CTR tx7ArbitFrameDelay | 1.3.6.1.4.1.343.6.10.3.1.1.27 | Counter | read-only | Tx packets delayed more than 32 slot times (due to NIMBUS overload) |
| CTR txDeferreds | 1.3.6.1.4.1.343.6.10.3.1.1.28 | Counter | read-only | Half duplex: Tx packet delayed, due to receiving a packet. Full duplex: Tx packet delayed, due to receiving of a MAC pause control frame. |
| CTR txOctetsHis | 1.3.6.1.4.1.343.6.10.3.1.1.29 | Counter | read-only | Upper part of a 64 bit octet transmitted counter |
| CTR txOctetsLos | 1.3.6.1.4.1.343.6.10.3.1.1.30 | Counter | read-only | Lower part of a 64 bit octet transmitted counter |
| CTR txOctetsOutOfRange | 1.3.6.1.4.1.343.6.10.3.1.1.31 | Counter | read-only | Internal error |
| CTR txExcessiveDeferralsErrors | 1.3.6.1.4.1.343.6.10.3.1.1.32 | Counter | read-only | Maximum deferral should be the duration of a maximum length packet, if no errors on the net. Excessive deferral is indicated if deferral duration is more than approximately 49 maximum packets. |
| CTR txNiaUnderRunAborts | 1.3.6.1.4.1.343.6.10.3.1.1.34 | Counter | read-only | Internal discard |
| CTR txExcessiveLengthDrops | 1.3.6.1.4.1.343.6.10.3.1.1.35 | Counter | read-only | Tx packets discarded due to too long packets (Only possible if receiving too long packets are allowed) |
| CTR txLinkDownEvents | 1.3.6.1.4.1.343.6.10.3.1.1.36 | Counter | read-only | No link pulses are received. Usually this means that the cable is removed. |
| OCT txAllCounterPackets | 1.3.6.1.4.1.343.6.10.3.1.1.37 | OCTET STRING | read-only | A collection of all counters for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: txStatIndex INTEGER txOctetsHis Counter txOctetsLos Counter txUCPkts64Octets Counter txUCPkts65To127Octets Counter txUCPkts128To255Octets Counter txUCPkts256To511Octets Counter txUCPkts512To1023Octets Counter txUCPkts1024To1518Octets Counter txMCPkts64Octets Counter txMCPkts65To127Octets Counter txMCPkts128To255Octets Counter txMCPkts256To511Octets Counter txMCPkts512To1023Octets Counter txMCPkts1024To1518Octets Counter txBCPkts64Octets Counter txBCPkts65To127Octets Counter txBCPkts128To255Octets Counter txBCPkts256To511Octets Counter txBCPkts512To1023Octets Counter txBCPkts1024To1518Octets Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value. |
| OCT txAllCounterOthers | 1.3.6.1.4.1.343.6.10.3.1.1.38 | OCTET STRING | read-only | A collection of all counters -- other than for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: txStatIndex INTEGER txDeferreds Counter txExcessiveDeferralsErrors Counter txForwRxErrorCollision Counter txNiaUnderRunAborts Counter txLinkDownEvents Counter -- Counters from RFC1643 txCSenseErrors Counter txSQEErrors Counter txLateCollisions Counter txExcessiveCollisionErrors Counter txSingleCollisionFrames Counter txMultipleCollisionFrames Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value. |
| rxStatTable | 1.3.6.1.4.1.343.6.10.3.2 | not-accessible | Receive statistics table. | |
| rxStatEntry | 1.3.6.1.4.1.343.6.10.3.2.1 | not-accessible | An entry containing objects for receive statistics. | |
| INT rxStatIndex | 1.3.6.1.4.1.343.6.10.3.2.1.1 | INTEGER | read-only | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| CTR rxUCPkts64OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.2 | Counter | read-only | 64 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts64OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.3 | Counter | read-only | 64 byte unicast packets received which have been forwarded |
| CTR rxUCPkts65To127OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.4 | Counter | read-only | 65 to 127 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts65To127OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.5 | Counter | read-only | 65 to 127 byte unicast packets received which have been forwarded |
| CTR rxUCPkts128To255OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.6 | Counter | read-only | 128 to 255 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts128To255OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.7 | Counter | read-only | 128 to 255 byte unicast packets received which have been forwarded |
| CTR rxUCPkts256To511OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.8 | Counter | read-only | 256 to 511 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts256To511OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.9 | Counter | read-only | 255 to 511 byte unicast packets received which have been forwarded |
| CTR rxUCPkts512To1023OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.10 | Counter | read-only | 512 to 1023 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts512To1023OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.11 | Counter | read-only | 512 to 1023 byte unicast packets received which has been forwarded |
| CTR rxUCPkts1024To1518OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.12 | Counter | read-only | 1024 to 1518 byte unicast packets received which have not been forwarded |
| CTR rxUCPkts1024To1518OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.13 | Counter | read-only | 1024 to 1518 byte unicast packets received which have been forwarded |
| CTR rxShortErrors | 1.3.6.1.4.1.343.6.10.3.2.1.14 | Counter | read-only | Receive fragments shorter than the minimum ordinary collision fragment. |
| CTR rxRuntErrors | 1.3.6.1.4.1.343.6.10.3.2.1.15 | Counter | read-only | Ordinary collision fragments received. |
| CTR rxDataRateMMErrors | 1.3.6.1.4.1.343.6.10.3.2.1.16 | Counter | read-only | A data rate miss-match error occurs if the data rate deviation is larger than allowed. This should only occur if problems with the TX oscillator in the adapter transmitting the frame. |
| CTR rxMCPkts64OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.17 | Counter | read-only | 64 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts64OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.18 | Counter | read-only | 64 byte multicast packets received which have been forwarded |
| CTR rxMCPkts65To127OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.19 | Counter | read-only | 65 to 127 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts65To127OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.20 | Counter | read-only | 65 to 127 byte multicast packets received which have been forwarded |
| CTR rxMCPkts128To255OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.21 | Counter | read-only | 128 to 255 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts128To255OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.22 | Counter | read-only | 128 to 255 byte multicast packets received which have been forwarded |
| CTR rxMCPkts256To511OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.23 | Counter | read-only | 256 to 511 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts256To511OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.24 | Counter | read-only | 256 to 511 byte multicast packets received which have been forwarded |
| CTR rxMCPkts512To1023OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.25 | Counter | read-only | 512 to 1023 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts512To1023OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.26 | Counter | read-only | 512 to 1023 byte multicast packets received which have been forwarded |
| CTR rxMCPkts1024To1518OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.27 | Counter | read-only | 1024 to 1518 byte multicast packets received which have not been forwarded |
| CTR rxMCPkts1024To1518OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.28 | Counter | read-only | 1024 to 1518 byte multicast packets received which have been forwarded |
| CTR rxOctetsLocalHis | 1.3.6.1.4.1.343.6.10.3.2.1.29 | Counter | read-only | Upper part of a 64 bit octet received counter which has not been forwarded |
| CTR rxOctetsLocalLos | 1.3.6.1.4.1.343.6.10.3.2.1.30 | Counter | read-only | Lower part of a 64 bit octet received counter which has not been forwarded |
| CTR rxOctetsForwardedHis | 1.3.6.1.4.1.343.6.10.3.2.1.31 | Counter | read-only | Upper part of a 64 bit octet received counter which has been forwarded |
| CTR rxOctetsForwardedLos | 1.3.6.1.4.1.343.6.10.3.2.1.32 | Counter | read-only | Lower part of a 64 bit octet received counter which has been forwarded |
| CTR rxBCPkts64OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.33 | Counter | read-only | 64 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts64OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.34 | Counter | read-only | 64 byte broadcast packets received which have been forwarded |
| CTR rxBCPkts65To127OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.35 | Counter | read-only | 65 to 127 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts65To127OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.36 | Counter | read-only | 65 to 127 byte broadcast packets received which have been forwarded |
| CTR rxBCPkts128To255OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.37 | Counter | read-only | 128 to 255 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts128To255OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.38 | Counter | read-only | 128 to 255 byte broadcast packets received which have been forwarded |
| CTR rxBCPkts256To511OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.39 | Counter | read-only | 256 to 511 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts256To511OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.40 | Counter | read-only | 256 to 511 byte broadcast packets received which have been forwarded |
| CTR rxBCPkts512To1023OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.41 | Counter | read-only | 512 to 1023 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts512To1023OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.42 | Counter | read-only | 512 to 1023 byte broadcast packets received which have been forwarded |
| CTR rxBCPkts1024To1518OctetsLocals | 1.3.6.1.4.1.343.6.10.3.2.1.43 | Counter | read-only | 1024 to 1518 byte broadcast packets received which have not been forwarded |
| CTR rxBCPkts1024To1518OctetsForwardeds | 1.3.6.1.4.1.343.6.10.3.2.1.44 | Counter | read-only | 1024 to 1518 byte broadcast packets received which have been forwarded |
| CTR rxFilterMACUnexp2ndPortDrops | 1.3.6.1.4.1.343.6.10.3.2.1.45 | Counter | read-only | MAC address has been moved from one port to another |
| CTR rxFilterIllegalMACDrops | 1.3.6.1.4.1.343.6.10.3.2.1.46 | Counter | read-only | Packet is dropped because the source MAC address is illegal (zero or broadcase) |
| CTR rxFlowCtrlPram | 1.3.6.1.4.1.343.6.10.3.2.1.47 | Counter | read-only | Half duplex: Number of Flow Control collisions generated due to PRAM limitations. Full duplex: Number of MAC pause control frames transmitted due to PRAM limitations. |
| CTR rxFlowCtrlNimbus | 1.3.6.1.4.1.343.6.10.3.2.1.48 | Counter | read-only | Half duplex: Number of Flow Control collisions generated due to NIMBUS overload. Full duplex: Number of MAC pause control frames transmitted due to NIMBUS overload. |
| CTR rxPramOverRuns | 1.3.6.1.4.1.343.6.10.3.2.1.49 | Counter | read-only | Rx packets discarded due to PRAM limitation |
| CTR rxNimbusOverRuns | 1.3.6.1.4.1.343.6.10.3.2.1.50 | Counter | read-only | Rx packets discarded due to NIMBUS limitation |
| CTR rxVeryLongErrors | 1.3.6.1.4.1.343.6.10.3.2.1.51 | Counter | read-only | Rx packets that are much too long (> 6000 bytes). |
| CTR rxLongErrors | 1.3.6.1.4.1.343.6.10.3.2.1.52 | Counter | read-only | Rx packets that are too long (> 1518 bytes) |
| CTR rxPauseMacControlReceived | 1.3.6.1.4.1.343.6.10.3.2.1.53 | Counter | read-only | Number of MAC pause control frames received |
| CTR rxUnknownMacControlFrame | 1.3.6.1.4.1.343.6.10.3.2.1.54 | Counter | read-only | Number of unsupported MAC control frames received |
| CTR rxPiaOutOfPoolDropErrors | 1.3.6.1.4.1.343.6.10.3.2.1.55 | Counter | read-only | Reception is aborted due to lack of pool memory -- the switch is overloaded. |
| CTR rxCodeViolations | 1.3.6.1.4.1.343.6.10.3.2.1.56 | Counter | read-only | An illegal symbol received on a 100Base-X port. |
| CTR rxJabberErrors | 1.3.6.1.4.1.343.6.10.3.2.1.57 | Counter | read-only | Rx packets that are too long and contains CRC errors and/or dribble nibble. |
| CTR rxNiaOverRunDropErrors | 1.3.6.1.4.1.343.6.10.3.2.1.58 | Counter | read-only | The NIA Rx buffer goes to overrun if the nimbus is overloaded (NIA10 only). |
| OCT rxAllCounterPackets | 1.3.6.1.4.1.343.6.10.3.2.1.59 | OCTET STRING | read-only | A collection of all counters for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are: rxStatIndex INTEGER rxOctetsLocalHis Counter rxOctetsLocalLos Counter rxOctetsForwardedHis Counter rxOctetsForwardedLos Counter rxUCPkts64OctetsLocals Counter rxUCPkts64OctetsForwardeds Counter rxUCPkts65To127OctetsLocals Counter rxUCPkts65To127OctetsForwardeds Counter rxUCPkts128To255OctetsLocals Counter rxUCPkts128To255OctetsForwardeds Counter rxUCPkts256To511OctetsLocals Counter rxUCPkts256To511OctetsForwardeds Counter rxUCPkts512To1023OctetsLocals Counter rxUCPkts512To1023OctetsForwardeds Counter rxUCPkts1024To1518OctetsLocals Counter rxUCPkts1024To1518OctetsForwardeds Counter rxMCPkts64OctetsLocals Counter rxMCPkts64OctetsForwardeds Counter rxMCPkts65To127OctetsLocals Counter rxMCPkts65To127OctetsForwardeds Counter rxMCPkts128To255OctetsLocals Counter rxMCPkts128To255OctetsForwardeds Counter rxMCPkts256To511OctetsLocals Counter rxMCPkts256To511OctetsForwardeds Counter rxMCPkts512To1023OctetsLocals Counter rxMCPkts512To1023OctetsForwardeds Counter rxMCPkts1024To1518OctetsLocals Counter rxMCPkts1024To1518OctetsForwardeds Counter rxBCPkts64OctetsLocals Counter rxBCPkts64OctetsForwardeds Counter rxBCPkts65To127OctetsLocals Counter rxBCPkts65To127OctetsForwardeds Counter rxBCPkts128To255OctetsLocals Counter rxBCPkts128To255OctetsForwardeds Counter rxBCPkts256To511OctetsLocals Counter rxBCPkts256To511OctetsForwardeds Counter rxBCPkts512To1023OctetsLocals Counter rxBCPkts512To1023OctetsForwardeds Counter rxBCPkts1024To1518OctetsLocals Counter rxBCPkts1024To1518OctetsForwardeds Counter The values are represented in the OCTET STRING in the listed order. Each value stored as a 32 bits big engine value. |
| OCT rxAllCounterOthers | 1.3.6.1.4.1.343.6.10.3.2.1.60 | OCTET STRING | read-only | A collection of all counters other than for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: rxStatIndex INTEGER rxShortErrors Counter rxRuntErrors Counter rxDataRateMMErrors Counter rxFilterMACUnexp2ndPortDrops Counter rxFilterIllegalMACDrops Counter rxVeryLongErrors Counter rxLongErrors Counter rxCodeViolation Counter rxJabberErrors Counter -- Counters from RFC1643 rxAlignErrors Counter rxFCSErrors Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value. |
| OCT totalRxTxPackets | 1.3.6.1.4.1.343.6.10.3.3 | OCTET STRING | read-only | This object is used for LED control to display traffic. Values in the string are all packets transmitted and received at each port. The number and order of values equals the ifIndex, however only physical ports are included in the array. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange. |
| OCT totalCollisions | 1.3.6.1.4.1.343.6.10.3.4 | OCTET STRING | read-only | This object is used for LED control to display collision. Values in the string are the total collisions at each port. The number and order of values equals the ifIndex, however only physical ports are included in the array. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange. |
| adaptiveForwardMode | 1.3.6.1.4.1.343.6.10.4 | |||
| INT adaptiveForwardModeSampleTime | 1.3.6.1.4.1.343.6.10.4.1 | INTEGER | read-write | Specify how long (in seconds) the received packets will be monitored. The resulting forwarding mode will be based on the quality of the packets |
| INT adaptiveForwardModeRuntsOffset | 1.3.6.1.4.1.343.6.10.4.2 | INTEGER | read-write | Specifies the minimum amount of runts during the sample time which forces the port out of cutThrough(2). The value is specified in per mill * 1000 |
| INT adaptiveForwardModeRuntsRange | 1.3.6.1.4.1.343.6.10.4.3 | INTEGER | read-write | Specifies (together with adaptiveForwardModeRuntsOffset) the maximum amount of runts allowed during the sample time. This forces the port back to cutThrough(2). The value is specified in per mill * 1000 |
| INT adaptiveForwardModeCrcsOffset | 1.3.6.1.4.1.343.6.10.4.4 | INTEGER | read-write | Specifies the maximum amount of CRC errors during the sample time. This forces the port out of Store-and-Forward. The value is specified in per mill * 1000 |
| INT adaptiveForwardModeCrcsRange | 1.3.6.1.4.1.343.6.10.4.5 | INTEGER | read-write | Specifies together with adaptiveForwardModeCrcsOffset the maximum amount of CRC errors during the sample time. This forces the port out of Store-and-Forward. The value is specified in per mill * 1000 |
| chipSets | 1.3.6.1.4.1.343.6.10.5 | |||
| smu | 1.3.6.1.4.1.343.6.10.6 | |||
| smuModuleTable | 1.3.6.1.4.1.343.6.10.6.1 | not-accessible | Not implemented yet | |
| smuModuleEntry | 1.3.6.1.4.1.343.6.10.6.1.1 | not-accessible | Not implemented yet | |
| INT smuModuleChassisIndex | 1.3.6.1.4.1.343.6.10.6.1.1.1 | INTEGER | read-only | Not implemented yet |
| INT smuModuleIndex | 1.3.6.1.4.1.343.6.10.6.1.1.2 | INTEGER | read-only | Not implemented yet |
| INT smuModuleState | 1.3.6.1.4.1.343.6.10.6.1.1.3 | INTEGER | read-only | Not implemented yet |
| smuPortTable | 1.3.6.1.4.1.343.6.10.6.2 | not-accessible | Not implemented yet | |
| smuPortEntry | 1.3.6.1.4.1.343.6.10.6.2.1 | not-accessible | Not implemented yet | |
| INT smuPortChassisIndex | 1.3.6.1.4.1.343.6.10.6.2.1.1 | INTEGER | read-only | Not implemented yet |
| INT smuPortModuleIndex | 1.3.6.1.4.1.343.6.10.6.2.1.2 | INTEGER | read-only | Not implemented yet |
| INT smuPortIndex | 1.3.6.1.4.1.343.6.10.6.2.1.3 | INTEGER | read-only | Not implemented yet |
| INT smuPortAttachedNumber | 1.3.6.1.4.1.343.6.10.6.2.1.4 | INTEGER | read-only | Not implemented yet |
| OCT smuPortAttachedMac | 1.3.6.1.4.1.343.6.10.6.2.1.5 | OCTET STRING | read-only | Not implemented yet |
| IP smuPortAttachedIp | 1.3.6.1.4.1.343.6.10.6.2.1.6 | IpAddress | read-only | Not implemented yet |
| permanentEntries | 1.3.6.1.4.1.343.6.10.7 | |||
| permanentEntriesTable | 1.3.6.1.4.1.343.6.10.7.1 | not-accessible | ||
| permanentEntriesEntry | 1.3.6.1.4.1.343.6.10.7.1.1 | not-accessible | ||
| OCT permanentEntriesMACAddr | 1.3.6.1.4.1.343.6.10.7.1.1.1 | OCTET STRING | read-write | MAC address of permanent entry. |
| INT permanentEntriesPortId | 1.3.6.1.4.1.343.6.10.7.1.1.2 | INTEGER | read-write | Port number for permanent entry. |
| INT permanentEntriesCreateObj | 1.3.6.1.4.1.343.6.10.7.1.1.3 | INTEGER | read-write | Create a non-existant table entry. If the entry already exists, genError is returned. Format: PortId (INTEGER) |
| INT permanentEntriesDeleteObj | 1.3.6.1.4.1.343.6.10.7.1.1.4 | INTEGER | read-write | Delete an existing table entry. |
| matrix | 1.3.6.1.4.1.343.6.10.8 | |||
| matrixModuleTable | 1.3.6.1.4.1.343.6.10.8.1 | not-accessible | The table for general stack information | |
| matrixModuleEntry | 1.3.6.1.4.1.343.6.10.8.1.1 | not-accessible | Information for a specific module slot about stackconnections, state, masterinformation | |
| INT matrixModuleIndex | 1.3.6.1.4.1.343.6.10.8.1.1.1 | INTEGER | read-only | Slot number to retrieve information for. 1 is slot A, 2 is slot B |
| INT matrixModuleState | 1.3.6.1.4.1.343.6.10.8.1.1.2 | INTEGER | read-only | State of the matrix module. If notAvailable(99) no matrix module can be seen, active(1) is indicating a running module, standby(2) is indicating a module that is ready to become active if needed in a redundant setup, error(3) indicates a stack/redundancy error, back(4) is id the SIM module is running in a back to back configuration |
| INT matrixNumberConnected | 1.3.6.1.4.1.343.6.10.8.1.1.3 | INTEGER | read-only | The number of connected units to the matrix module |
| INT matrixMasterPort | 1.3.6.1.4.1.343.6.10.8.1.1.4 | INTEGER | read-only | 0 means no master available, otherwise an ifindex is returned (50->57) |
| matrixPortTable | 1.3.6.1.4.1.343.6.10.8.2 | not-accessible | Matrix module per port overview. | |
| matrixPortEntry | 1.3.6.1.4.1.343.6.10.8.2.1 | not-accessible | Per switch of information gathered from the matrix module about the connected devices | |
| INT matrixPortModuleIndex | 1.3.6.1.4.1.343.6.10.8.2.1.1 | INTEGER | read-only | Slot number to retrieve information for. 1 is slot A, 2 is slot B |
| INT matrixPortIndex | 1.3.6.1.4.1.343.6.10.8.2.1.2 | INTEGER | read-only | Index for retrieving the matrix ports |
| INT matrixPort | 1.3.6.1.4.1.343.6.10.8.2.1.3 | INTEGER | read-only | 0 means no device is available, otherwise an ifindex is returned (50->57) |
| INT matrixPortType | 1.3.6.1.4.1.343.6.10.8.2.1.4 | INTEGER | read-only | The connected device type, notAvailable(99) if unknown or none |
| INT matrixPortMajVer | 1.3.6.1.4.1.343.6.10.8.2.1.5 | INTEGER | read-only | Major Version of matrix module shared memory layout supported |
| INT matrixPortMinVer | 1.3.6.1.4.1.343.6.10.8.2.1.6 | INTEGER | read-only | Minor Version of matrix module shared memory layout supported |
| OCT matrixPortMac | 1.3.6.1.4.1.343.6.10.8.2.1.7 | OCTET STRING | read-only | Mac address of the device connected to a specific matrix port. If the device does not have a mac address it will be zero |
| IP matrixPortIp | 1.3.6.1.4.1.343.6.10.8.2.1.8 | IpAddress | read-write | IP address of the device connected to a specific matrix port. If the device does not have an IP address it will be zero |
| IP matrixPortSubnetMask | 1.3.6.1.4.1.343.6.10.8.2.1.9 | IpAddress | read-write | IP subnet mask of the device connected to a specific matrix port. |
| IP matrixPortGateway | 1.3.6.1.4.1.343.6.10.8.2.1.10 | IpAddress | read-write | IP gateway of the device connected to a specific matrix port. |
| TIK matrixLastChange | 1.3.6.1.4.1.343.6.10.8.3 | TimeTicks | read-only | Timestamp for last change in matrix tables on any Matrix module |
| mediamodules | 1.3.6.1.4.1.343.6.10.9 | |||
| mediaModuleTable | 1.3.6.1.4.1.343.6.10.9.1 | not-accessible | Possible values of indices are 1..moduleMaxMediaModules | |
| mediaModuleEntry | 1.3.6.1.4.1.343.6.10.9.1.1 | not-accessible | Possible values of indices are 1..stackMaxChassis, 1..chassisMaxModules and 1..moduleMaxMediaModules | |
| INT moduleMode | 1.3.6.1.4.1.343.6.10.9.1.1.1 | INTEGER | read-write | Hardware mode for media module. Stack mode is 1 (connected to stack), Stand alone mode is 2 (connected to switch). |
| INT matrixAttachmentPort | 1.3.6.1.4.1.343.6.10.9.1.1.2 | INTEGER | read-only | Returns the port number of the Matrix port the uplink mmodule is attached to. NB: will return 50 for a uplink module not connected to a Matrix Module |
| TIK mediaModuleChange | 1.3.6.1.4.1.343.6.10.9.2 | TimeTicks | read-only | The value of sysUpTime after any mediamoduletype has changed |
RFC description
Intel Express Switch 500 series MIB managing switch modules, port configuration, flow control, and forwarding modes.
Start monitoring Intel S500 series network device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.