All MIBs › INTEL-S500-MIB › stackCrc
stackCrc
Module: INTEL-S500-MIB
OID (symbolic): INTEL-S500-MIB::stackCrc
OID (numeric): 1.3.6.1.4.1.343.6.10.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: checksum for stack specific parameters If a parameter is unavailable 0 is returned
What is stackCrc?
A checksum computed over this switch's stack-specific configuration parameters, used to detect configuration drift between stacked units. A value of 0 means the checksum could not be calculated because the relevant parameters are unavailable on this unit. Comparing this value across stack members lets an admin spot a unit that fell out of sync after a config change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.15 snmpwalk -v2c -c public <target> INTEL-S500-MIB::stackCrc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.15.1 snmpget -v2c -c public <target> INTEL-S500-MIB::stackCrc.1
Start monitoring Intel S500 series network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-S500-MIB::stackCrc OID value, configure state conditions and alerts, and monitor any Intel S500 series network device from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.10 | s500 | INTEL-S500-MIB |
| 1.3.6.1.4.1.343.6.10.1.15 | stackCrc | INTEL-S500-MIB |