INTEL-S500-MIB :: defaultFlowControlMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › INTEL-S500-MIB › defaultFlowControlMode

defaultFlowControlMode

Module: INTEL-S500-MIB

OID (symbolic): INTEL-S500-MIB::defaultFlowControlMode

OID (numeric): 1.3.6.1.4.1.343.6.10.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Default Flow Control mode. This is used by the object portConfFlowControl when it's value is default(1)

What is defaultFlowControlMode?

Sets the switch-wide default for 802.3x-style flow control, used by any port whose portConfFlowControl is left at default(1). Enabling it lets a congested port ask its link partner to pause transmission instead of dropping frames. Admins usually enable this on uplinks to servers that can burst traffic faster than the switch can drain it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.2
snmpwalk -v2c -c public <target> INTEL-S500-MIB::defaultFlowControlMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.2.1
snmpget -v2c -c public <target> INTEL-S500-MIB::defaultFlowControlMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.10.1.2.1 i <value>

Start monitoring Intel S500 series network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-S500-MIB::defaultFlowControlMode OID value, configure state conditions and alerts, and monitor any Intel S500 series network device from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.343intelAOLAN-MIB
1.3.6.1.4.1.343.6mib2extEXPRESSGS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.343.6.10s500INTEL-S500-MIB
1.3.6.1.4.1.343.6.10.1.2defaultFlowControlModeINTEL-S500-MIB