All MIBs › INTEL-S500-MIB › defaultSwitchMode
defaultSwitchMode
Module: INTEL-S500-MIB
OID (symbolic): INTEL-S500-MIB::defaultSwitchMode
OID (numeric): 1.3.6.1.4.1.343.6.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Default switch mode. This is used by the object portSwitchMode when it's value is default(1)
What is defaultSwitchMode?
Sets the switch-wide default forwarding mode used by any port whose own portConfConfigSwitchMode is left at default(1). Valid choices are cutThrough, fragmentFree, storeAndForward, or adaptive, trading off latency against error-checking. An admin lowering error rates on a noisy segment would typically move this from cutThrough to storeAndForward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.1 snmpwalk -v2c -c public <target> INTEL-S500-MIB::defaultSwitchMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.10.1.1.1 snmpget -v2c -c public <target> INTEL-S500-MIB::defaultSwitchMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.10.1.1.1 i <value>
Start monitoring Intel S500 series network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-S500-MIB::defaultSwitchMode OID value, configure state conditions and alerts, and monitor any Intel S500 series network device from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.10 | s500 | INTEL-S500-MIB |
| 1.3.6.1.4.1.343.6.10.1.1 | defaultSwitchMode | INTEL-S500-MIB |