All MIBs › IJ8060-MIB › job_input_auto_continue_timeout
job_input_auto_continue_timeout
Module: IJ8060-MIB
OID (symbolic): IJ8060-MIB::job_input_auto_continue_timeout
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device will continue processing the job as if a continue event occurred, such as the front panel continue key being pressed. If the value is -1, the device does not automatically continue after a job related continuable error occurs. If the value is 0, the device immediately continues. If the value is greater than 0, the value represents the timeout value in seconds. Additional information: The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device will continue processing the job accourding to the action defined by JOB-INPUT-AUTO-CONTINUE-MODE. If the value is -1, the device does not automatically continue after a job related continuable error occurs. If the value is 0, the device immediately continues. If the value is greater than 0, the value represents the timeout value in seconds. The data for this object is stored in NVRAM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 snmpwalk -v2c -c public <target> IJ8060-MIB::job_input_auto_continue_timeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35.1 snmpget -v2c -c public <target> IJ8060-MIB::job_input_auto_continue_timeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35.1 i <value>
Start monitoring HP-compatible printer/multifunction device (IJ8060 print engine) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IJ8060-MIB::job_input_auto_continue_timeout OID value, configure state conditions and alerts, and monitor any HP-compatible printer/multifunction device (IJ8060 print engine) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | system | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | status_system | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job_input_auto_continue_timeout | IJ8060-MIB |